6500 E709n installs will not perform at the stage set up.

Similar Questions

• Repair Windows installation will not continue beyond the mark of 26 min during fill the stage of installation

  Hi there all your PC gurus

  PC fails to complete a repair of Windows XP installation. It does not go beyond the mark of 26 min during the installation phase ends. You can still move the mouse around, however installation is not continue beyond this point.

  The 2 following errors are received:
  Error installing com +.
  "of the subcomponent com + threw an exception during the processing of the OC_complete_installation Setup message.
  d:/xpsp/com/com1x/src/complussetup/Comsetup/csetuputil.cpp (line 3429)
  Error code = 0x8000ffff
  Castastrophic failure
  Cannot run the function ' DllRegisterserverc)' in
  c:/Windows/System32/clbcatq.dll ".

  Corrupted file Unregmp2.exe
  The file or the directory c:/documents and settings by default/user/start menu/programs/windows Media.lnk is damaged and unreadable. Please run the chkdsk utility. »

  PC is a Dell Vostro 1510, it is only a couple of years.

  Can someone please?

  The initial problem was that the PC did not go beyond the page of Windows to start upward. So I had to do an installation of the Dell windows XP disk repair. But I couldn't boot from the CD, (even after changing in the system BIOS boot order) to work around this problem, so I had to disable the boot on the other upward options being - HDD, USB etc. so only if it start from the disc.

  After completing the first part of the repair facility, the PC restarted to complete the second part of the installation, however I got an error message "the Kernel32.dll file is possibly corrupt. The header checksum does not match the checksum calculated.

  After some research, I solved this problem by using the windows recovery console to extract a new copy of the kernel32.dll from the windows XP disc. It seemed to work. The second part of the window repair facility restarted successfully, but now the problem is it will not complete installation, it gets stuck/not will not go beyond the 26 minute mark during the phase of "complete installation."

  It has been full of hiccups. I'm not a person of computer tech at all, but have managed to get so far at this stage.  Can someone please please help, very much appreciated.
  Thanks :)

  Hello

  Follow the steps from the link: you receive the error message "UNREGMP2." EXE - Entry Point not found"when you upgrade or repair Windows XP: http://support.microsoft.com/kb/889288

  You can also try the steps from the link which is very useful for troubleshooting Windows XP startup problems:

  How do I recover from a corrupted registry that prevents http://support.microsoft.com/kb/307545 of Windows XP startup

• HP Officejet 6500 a: printer will not connect to the wireless network.

  I got this HP printer for a while and it worked fine.  Our old router is out and we had to get a new one.  Installed perfectly and printer continued to work properly.  The password for the router was ridiculous, that's why I changed it to something much more simple to remember.  Since then, my printer will not connect to wireless internet.  I have a ~ and reinstalled the printer but still have the same problem.  I thought maybe to try the former password would, but who does not work either.

  Anyone has any ideas that might help before chuck it and go and get a new one altogether?

  Thank you.

  Easy things first.  Turn off the router and the printer.  Turn on the router and wait 3 minutes.  Turn on the printer and see if it connects to your router.  Status?

  If no joy, temporarily disable all security in the router.  Now try to connect the printer to your SSID not guaranteed without password.  Status now?

  If OK, go back and add WPA2-AES with your simple password.  Status now?

• Windows Paint text installation will not work and the 'A' accentuates not when the cursor passes over it

  I just wanted to put some txt on photo paint open so imported the scanned picture and everything else works, but the ease to enter text. Move the cursor over the 'A' does not the highlight box around him upward and toolbars from view has the text one checked but dimmed down. Is the same for an empty document in the paint.

  Two ideas...

  (1) Vista paint text button does not work:
  Reach... View / Zoom / Custom / 100% / OK

  (2) I was wondering after leaving by clicking on the 'A '...
  What happens if you move the pointer over
  the picture and left click or drag to create a
  TextBox?

  The following links may be useful:

  Windows Vista-
  Open Paint
  http://Windows.Microsoft.com/en-us/Windows-Vista/open-Paint

  With the help of paint
  http://Windows.Microsoft.com/en-us/Windows-Vista/using-paint

  Paint tools
  http://Windows.Microsoft.com/en-us/Windows-Vista/paint-tools

  How to rotate an Image using Microsoft Paint
  http://maximumpcguides.com/Windows-Vista/how-to-rotate-an-image-using-Microsoft-Paint/

  Microsoft Paint-
  How to add text to digital pictures in Vista
  http://www.ehow.com/how_5841367_add-text-digital-pictures-Vista.html#ixzz1lC2YSoS8http :// www.ehow.com/how_5841367_add-text-digital-pictures-vista.html

• MovieClip will not add to the list after calling addChild()

  I have a MovieClip in the library who refuses to be added to the stage during his call with addChild(). Here's the code.

  You will see a function called clickedACTDD_BTN. You will also see that the function offers a choice if the MovieClip is present, then it is deleted. If it is not present, then this is given properties and added. Also, note my tracing instructions in each choice. All signs as expected but the MovieClip ever arises. I've been on that days code and just can't see what I did wrong. Everyone sees it?

  package
  {
  PAheader 1.0
  
  import flash.display. *;
  import flash.events. *;
  import flash.geom. *;
  
  SerializableAttribute public class PAheader extends MovieClip
  {
  public var headerScreen:Screen = Screen.mainScreen;
  public var hdrLogo;
  public var BLKback;
  public var PRFLAVTR:profileAvatarMC = new profileAvatarMC(); Profile avatar
  public var msgbubble:messageBubbleMC = new messageBubbleMC(); ToolTip
  public var magGlass:magnifyingGlassMC = new magnifyingGlassMC(); In the shape of magnifying glass
  public var ACTDD_BTN:ActionsDDBtnMC = new ActionsDDBtnMC(); ACTIONS drop-down list button.
  public var HISDropD_BTN:HistoryDDBtnMC = new HistoryDDBtnMC(); HISTORY drop-down list button.
  public var REPDD_BTN:ReportsDDBtnMC = new ReportsDDBtnMC(); Button drop-down list of REPORTS.
  public var actionbucket:ActionBucket = new ActionBucket();

  public void PAheader()
  {
  addEventListener (Event.ADDED_TO_STAGE, initPAheader);
  } / - End constructor public function PAheader().
  
  public void initPAheader(e:Event_=_null):void
  {
  trace("==============================================");
  trace ("PAheader called.");
  trace ("of PAheader: visibleBounds.width:" + headerScreen.visibleBounds.width + "visibleBounds.width:" + headerScreen.visibleBounds.height);
  addEventListener (Event.RESIZE, resizedHeader);
  
  BLKback.width = AWSplash.resizeAsset(1024,headerScreen.visibleBounds.width,1024);
  BLKback.scaleY = BLKback.scaleX;
  //------------- adding Assets ----------------------------------------------------------------------------------------- ---------------------------------
  
  -Avatar profile
  PRFLAVTR.x = stage.fullScreenWidth - PRFLAVTR.width - 10;
  PRFLAVTR.y = height/2-PRFLAVTR.height/2;
  addChild (PRFLAVTR);
  -The ToolTip
  msgbubble.x = PRFLAVTR.x - PRFLAVTR.width - 10;
  msgbubble.y = height/2 - msgbubble.height/2;
  addChild (msgbubble);
  -Shaped magnifying glass
  magGlass.x = msgbubble.x - msgbubble.width - 10;
  magGlass.x = msgbubble.x - msgbubble.width - 10;
  magGlass.y = height/2 - magGlass.height/2;
  addChild (magGlass);
  
  } // ----------------------------------------------------------------------------------------- -------------------------- End public function initPAheader().
  public void resizedHeader(e:Event_=_null):void
  {
  trace ("header REDIMENSIONNE");
  
  } // ----------------------------------------------------------------------------------------- ------------------------- End public function resizedHeader().
  
  public void addActionsDDButton(caller:MovieClip):void
  {
  trace ("addActionsDDButton. the appellant is: "+ calling);
  
  -ACTIONS button
  ACTDD_BTN. Width = AWSplash.resizeAsset(1024,headerScreen.visibleBounds.width,60);
  ACTDD_BTN.addEventListener (MouseEvent.CLICK, clickedACTDD_BTN);
  ACTDD_BTN.addEventListener (MouseEvent.MOUSE_OUT, outACTDD_BTN);
  ACTDD_BTN. ScaleY = ACTDD_BTN.scaleX;
  ACTDD_BTN.x = HISDropD_BTN.x - ACTDD_BTN.width;
  ACTDD_BTN.y = BLKback.y;
  caller.addChild (ACTDD_BTN);
  trace ("added ACTIONS!");
  
  } / / - End public static void addDDButtons().
  
  public void addHistoryDDButton(caller:MovieClip):void
  {
  trace ("addHistoryDDButton. the appellant is: "+ calling);
  -HISTORY button
  HISDropD_BTN.width = AWSplash.resizeAsset(1024,headerScreen.visibleBounds.width,60);
  HISDropD_BTN.scaleY = HISDropD_BTN.scaleX;
  HISDropD_BTN.x = headerScreen.visibleBounds.width/2 - HISDropD_BTN.width/2;
  HISDropD_BTN.y = BLKback.y;
  caller.addChild (HISDropD_BTN);
  trace ("added HISTORY!");
  } / / - End addHistoryDDButton() of the public service.
  
  public void addReportsDDButton(caller:MovieClip):void
  {
  trace ("addReportsDDButton. the appellant is: "+ calling);
  -The REPORTS button
  REPDD_BTN. Width = AWSplash.resizeAsset(1024,headerScreen.visibleBounds.width,60);
  REPDD_BTN. ScaleY = REPDD_BTN.scaleX;
  REPDD_BTN.x = HISDropD_BTN.x + ACTDD_BTN.width;
  REPDD_BTN.y = BLKback.y;
  caller.addChild (REPDD_BTN);
  trace ("added REPORTS!");
  } / / - End addHistoryDDButton() of the public service.
  
  / * function removeButtons(theCaller:MovieClip) public
  {
  If (theCaller.Contains (HISDropD_BTN): theCaller.contains (ACTDD_BTN): theCaller.contains (REPDD_BTN))
  {
  theCaller.removeChild (HISDropD_BTN);
  theCaller.removeChild (ACTDD_BTN);
  theCaller.removeChild (REPDD_BTN);
  }
  } / / - End public static void removeButtons(). * /
  
  public void clickedACTDD_BTN(e:MouseEvent_=_null):void
  {
  trace ("Clicked clickedACTDD_BTN!");
  If (Contains (actionbucket))
  {
  trace (this);
  removeChild (actionbucket);
  trace ("1");
  }
  on the other
  {
  trace (this);
  actionbucket. Width = AWSplash.resizeAsset(1024,headerScreen.visibleBounds.width,161);
  actionbucket.scaleY = actionbucket.scaleX;
  actionbucket.x = ACTDD_BTN.x;
  actionbucket.y = ACTDD_BTN.y + ACTDD_BTN.height;
  actionbucket.y = ACTDD_BTN.y;
  addChild (actionbucket);
  trace ("2");
  }
  } / / - End clickedACTDD_BTN() of the public service.
  
  public void outACTDD_BTN(e:MouseEvent_=_null):void
  {
  If (Contains (actionbucket))
  {
  detectTarget (actionbucket);
  }
  } // ----------------------------------------------------------------------------------------- -------------------------- End public function outACTDD_BTN().
  
  public void detectTarget(target:MovieClip):Boolean
  {
  var mousePoint:Point = target.localToGlobal (new Point (target.mouseX, target.mouseY));
  If (Target.hitTestPoint (mousePoint.x, mousePoint.y))
  {
  trace ("equity bucket!");
  Returns true;
  }
  on the other
  {
  trace ("not on STOCK bucket!");
  Returns false;
  }
  } // ----------------------------------------------------------------------------------------- -------------------------- End public function detectTarget().
  } // ========================================================================================= ======== End public class PAheader{}.
  } // ========================================================================================= =================== End package{}.

  my mistake, this.addChild (this) is not going to work.

  PAheader is a class and a class is not on stage.

  an instance of the class could be on stage, however.

  and another instance might not be on stage.

  just because you see something that is a member of PAheader class, or maybe just looks like a class member, does not mean that all instances, or even none, are on stage.

  to be sure: trace (this.stage) = null, means the instance you are checking is not on stage.

  "(and I don't know where you want to add this instance of the class, but, assuming that your document is a MovieClip and not a Sprite), MovieClip (root) .addChild (this) might work, although it's bad coding."  and stage.addChild (this) of colin will not work because the stage is not defined in this class.

• Can I do a clean install of Windows 7 Pro 64 bit on Vista Ultimate 32-bit upgrade. Installation file will not work. The error is described below.

  The XPS 730 with Intel Q9450 computer yourself running Windows 7 64 bit? The details of performance show that it is capable of 64-bit. When I try to install Windows 7 pro 64-bit upgrade, the installer will not work. I get an error that reads:
  The version of this file is not compatible with the version of Windows that you are running.
  
  I'm currently running Vista Ultimate 32 bit. Everything that I read on Microsoft and elsewhere says that you can go from Vista 32 bit to an operating system Windows 7 64-bit as long as you do the clean install. I'm that far away since I can't even run the installation.
  Maybe nobody knows what could be the problem?

  Hi Hal K,

  Thank you for visiting Microsoft Answers.

  If you are currently running a 32-bit version of Windows, you can only perform an upgrade to another 32-bit version of Windows. Similarly, if you run a 64-bit version of Windows, you can perform an upgrade to another 64-bit Windows version.

  If you want to move from a 32-bit version of Windows to a 64-bit version of Windows, and vice versa, you will need to back up your files and then perform a custom of the version of Windows you want to install installation.

  You can see the following link, installation and reinstallation of windows: http://windows.microsoft.com/en-us/windows7/Installing-and-reinstalling-Windows

  http://Windows.Microsoft.com/en-us/Windows7/32-bit-and-64-bit-Windows-frequently-asked-questions

  Swati K - Microsoft support technician
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Try to load version 9. Currently on 8. MacBookPro. Doesn't install not and symbol of installer of firefox will not install on the list of Applications?

  Don't know if I'm using the right conditions, but...
  -Firefox 8.0.1 is now on my list of Mac Applications.
  -When I tried to upgrade to version 9, it wouldn't hang out in my applications folder.
  -The symbol of the installer is "stuck" on the desktop and will not transfer into the application folder.
  -Whenever I turned on the computer, I now restart firefox and also get a warning that "this has been downloaded on the internet.
  -L' entire system seems to have slowed

  If he has problems with the update or the permissions then simpler is to download the full version and trash the version currently installed to do a clean install of the new version.

  Download a new copy of the Firefox program and save the file on the desktop disk image (dmg)

  • Firefox 9.0.x: http://www.mozilla.org/en-US/firefox/all.html
  • Trash the present application Firefox to do a clean (re-) install
  • Install the new version you downloaded

  Your profile data is stored in the Firefox profile folder, so you will not lose your bookmarks and other personal data if you uninstall and (re) install Firefox.

  • http://KB.mozillazine.org/Profile_folder_-_Firefox
  • https://support.Mozilla.org/KB/installing+Firefox+on+Mac
  • http://KB.mozillazine.org/Installing_Firefox#Mac_os_x

• HP Officejet 6500 a Plus-710n, multi-page document will not feed through the top.

  There is no error messages, just won't get out the paper. I am able to scan from the glass top, individually, but will not feed from the top on several pages.

  Hi Ginny29,

  I see that you are having problems with your printer.  I'll take a look at the document below.

  OfficeJet 6500 has

  Let me know how it goes.

• My officejet 6500 710 a will not be printed "printer e-mail address." Still stuck in the phase of 'connection '.

  My officejet 6500 710 a will not be printed "printer e-mail address." Still stuck in the phase of 'connection '.

  HP Pavilion D7, Windows 7, all parameters are good, network connected, all permit

  Hi ashkin1975,

  Please disconnect the power from the back of the printer for 30 seconds.  Plug in and turn on.

  From the front of the printer: configuration > network > network by default.  Now, in the same network menu, run the Wireless Setup Wizard.

• Creative suite 4 master collection of error installation will not install Premiere Pro, still, indesige, flash, ps4, sequelae.  He was installing everything.  Have tried reinstalling several times.  The firewall turned off and no other programs running. 

  Creative suite 4 master collection of error installation will not install Premiere Pro, indesign, flash, Photoshop and AfterEffects.  He was installing everything.  Have tried reinstalling several times.  The firewall turned off and no other programs running.  Running windows 7 64 bit.  Had no problem with installation on my last computer 64-bit windows 7

  It seems that everything is installed now.  Don't know how, but I think that I opened it as administrator.

  Thank you

  Corey

• Have windows 7 64 bit, andf Intuit quickbooks pro, Amyuni PDF printer will not save to the PDF format. Message from readings of intuit library printers 'could not print to the printer. Check your printer selection. Impression was canced from another progr

  Have windows 7 64 bit, andf Intuit quickbooks pro, Amyuni PDF printer will not save to the PDF format. Message from readings of intuit library printers 'could not print to the printer. Check your printer selection. Impression was canced from another program.

  Hi rkusa1,

  Thank you for using Microsoft Windows forum

  QuickBooks worked very well under Vista? It should also work reliably on Windows 7.

  However, you may want to follow these steps.

  1. right click on your quickbooks start exe file and open properties.

  2. on the Compatibility tab, select the compatibility mode and run this program in compatibility mode for Windows using the following link: http://windows.microsoft.com/en-us/windows7/Make-older-programs-run-in-this-version-of-Windows (only if she worked very well with former Windows operating system)

  3. the control privilege level "Run this program as Administrator". Press apply/OK to close properties.

  4. start - devices and printers - add a printer - add a local printer - create a new port - local port and name it QBD_PDF.

  5. Choose install AMYUNI Technologies - Amyuni Document Converter 300 (click the button update windows if it is not on your list).

  6. If windows detects you already have a driver and then choose to replace the current driver. The printer name Quickbooks PDF Converter - do not share the printer - NOT set as the default printer. Finishing

  7. start right click - devices and printers - printer QB, choose printer - properties and go to the Advanced tab.

  8. remove the checkmarks in the 4 elements with square next to them (lower part of the screen) boxes, and then select "Print directly to the printer" press OK to close the window.

  9 restart you computer and open Quickbooks. Open the file - printer installation and make sure of Quickbooks PDF Converter is selected for any operation PDF printer that you use frequently. (on rare occasions, you will see not of Quickbooks PDF Converter on the list, reboot again and you'll get it).

  You can now perform operations of PDF in Quickbooks (works for 32 and 64-bit Windows 7)

  For a similar question, see: http://social.technet.microsoft.com/Forums/en/w7itproappcompat/thread/2bd30024-0a64-4f6b-a831-8cb7c1e4cce5

  If the steps above do not post your question in this link: http://community.intuit.com/quickbooks

  Kind regards
  Aziz Nadeem - Microsoft Support

• Firefox will not display on the screen even though with Process Explorer, I see active Firefox.exe but no CPU usage

  I use Firefox as default browser v10.0.2 on Dell XPS8300 Intel Core i5 and Windows 7 Ultimate and Compaq Presario CQ57 IO IO Intel Core i3 and Windows 7 Home. More frequently on the (approximately 90% of attempts) that Dell (50% of attempts) Firefox will not display on the screen when I click the icon. Cannot display other programs when it happens. I expressly say display because I believe that Firefox has started. To work around the problem, I installed Process Explorer on both machines and launch this program first, then click on the Firefox icon. When the problem occurs I see process Firefox.exe in the list of processes; some CPU consumed but, then, no CPU activity. If I click on the Firefox icon, yet another process opens in the list of processes, but with the same answer - some consumed CPU and then no CPU activity. If I have 2 processes running and kill the process from the 1st, the 2nd poster and then everything is normal. If I do not open it treat a 2nd, but kill the 1st process then click the Firefox Firefox is displayed and all then is normal. This problem has occurred since the original on the two new machines installation. I have updated the video drivers on both computers.

  OK, let's see if we can solve this problem and make it work for you!

  First of all, if you start Firefox in safe mode (restart your computer first, then when you open Firefox, hold down the SHIFT key) it starts more reliable? This is usually caused by a defective module. If this does not help, then restart Firefox, go to the Firefox, then add-ons button and disable your extensions one by one until you find the troublemaker.

  Also, try to update to Firefox 11, it has several bug fixes that might make life easier here.

  Just as a few troubleshooting steps base to ensure that we have all the bases covered,
  Run all Windows updates, install all required service packs, etc.

  Update all of your plugins (Flash, Java, etc.): http://www.mozilla.org/plugincheck/.

  Download and install MalwareBytes Anti-Malware, run a full scan. http://www.malwarebytes.org/. This check allows that there is no virus on your computer, causing problems. You can uninstall this program after having cleaned the infections.

• Want to F9M09UA #ABA: cursor will not appear on the browser

  My cursor will not appear when the browser window. I tried to restart, stop, update and everything I could find on the internet, but nothing has worked.

  Hello @hcl14,

  Thank you for visiting the Forums from the HP Support! The forums are a great place where you can find solutions for your problems, with the help of the community!

  I stumbled upon your post on the issue of cursor and wanted to help!

  How long have you had this problem?  Did you recently install updates?  This will happen in any internet browser, or just a particular browser?  Have you tried to perform a System Restore, to define the notebook to its previous working state?  Forward to your response.

  Please let me know if this information helps you solve the problem by marking this message as 'accept as Solution', this will help others easily find the information they seek.  In addition, by clicking on the Thumbs up below is a great way to say thank you!

  Have a great day!

• According to the set printer wizard, my new printer software has been installed, but the printer will not appear on the section 'printers and faxes '.

  You have a printer again, with installation CD. According to the set printer wizard, my new printer software has been installed, but the printer will not appear on the "printers and faxes" section in Control Panel. Model of printer - Epson XP-200.  Have a Dell, Windows XP.  Help!  Not even sure who to ask...

  What version of XP (Home, Pro, Media Center) and service pack (none, 1, 2, 3)?

  Printers and faxes is totally blank?

  Open a command prompt window (start > run > cmd > OK)
  Type the following in the black command prompt window and press enter
  spooler request SC

  You should see something like this:
  Service_Name: Spooler
  TYPE: 110 WIN32_OWN_PROCESS (interactive)
  STATE: 4 RUNNING
  (STOPPABLE, NOT_PAUSABLE, IGNORES_SHUTDOWN
  WIN32_EXIT_CODE: 0 (0X0)
  SERVICE_EXIT_CODE: 0 (0X0)
  CHECKPOINT: 0X0
  WAIT_HINT: 0X0

  What is the 'State' displayed for you?

  Open the Services applet (start > run > services.msc > OK) and scroll down to "print spooler".  The status should be started and the Startup Type should be automatic.  What are the parameters of your correspondents?  If your print spooler is stopped, you can try to launch it by clicking on the link, but I suspect that it stops again.  Please report the results of your efforts.

• My dell optiplex 740 will not start. The screen is black, once it displays the Dell logo. It does not say that the computer is in mode 'sleep'.

  My dell optiplex 740 will not start.  The screen is black, once it displays the Dell logo.  It does not say that the computer is in mode 'sleep'.

  1. Did you the latest changes on the computer?
  2. When was the last time it was working fine?
  3. You receive an error message?

  Method 1

  See the articles below and check if it helps.

  Computer stops responding with a black screen when you start Windows XP

  http://support.Microsoft.com/kb/314503

  After the Windows Logo appears or after you log in to Windows, a Windows XP computer cannot display the wallpaper, a black screen or a blue screen

  http://support.Microsoft.com/kb/318027

  Method 2

  I suggest that you start the computer in the last good known Configuration mode and safe mode, post back with the result.

  A description of the options to start in Windows XP Mode

  http://support.Microsoft.com/kb/315222

  How to start your computer by using last good known Windows XP Configuration

  http://support.Microsoft.com/kb/307852

  How to fix a computer that does not start

  http://Windows.Microsoft.com/en-us/Windows-XP/help/Setup/how-to-fix-computer-that-will-not-start

  Method 3

  If the computer can boot in any mode, then I suggest that you perform the clean boot procedure and check if it helps.

  It is possible that some third-party programs installed on the computer is causing the problem.

  To help resolve the error and other messages, you can start Windows XP by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts.

  See section to learn more about how to clean boot.

  How to configure Windows XP to start in a "clean boot" State

  http://support.Microsoft.com/kb/310353

  Reset the computer to start as usual

  When you are finished troubleshooting, follow these steps to reset the computer to start as usual:

  (a) click Start, type msconfig in the search box and press ENTER.

  (b) If you are prompted for an administrator password or for confirmation, type your password or click on continue.

  (c) under the general tab, click the Normal startup option, and then click OK.

  (d) when you are prompted to restart the computer, click on restart.