6600 HP all-in-one: 6600 printer cartridges need to be replaced as often

Similar Questions

• HP psc1350 all-in-one: check printer cartridge error will not clear

  In the middle of printing of the check print cartridge light error came.  The cartridges are faily new and there has been no discoloration.  I tried to remove and reinsert the cartridges, disconnect the printer from the computer, disconnect the printer, press Cancel.  Error will not clear

  Hey @dennisc10,

  Welcome to the Forums of HP Support!

  I understand that you have some problems with an error light on your PSC 1350 all-in-one printer. I can help you with that.

  To start, make sure that the printer is plugged directly into a wall outlet, not a surge protector. Once done, this document explains How to solve the blinking lights on the printer.

  If after following the above you still can not clear the error, the printer needs to be replaced. You can contact the HP Support by clicking on this link and fill out the form below to discuss the options based on your warranty.

  Please let me know the results after following the above. If you are able to solve the problem or reach some resolution, click on accept solution. If you appreciate my help, please click on the thumbs up icon. The two icons are below this post.

• HP Deskjet 2540 all-in-one series printer need all the model compatible ink cartridge

  Need of compatible cartridges for HP Deskjet 2540 all-in-one series printer. Need all the compatible ink cartridge model #' s. hard to find here in Tahiti (Moorea).

  Hello @bubbamoorea,

  Welcome to the HP Forums!

  I understand that you need compatible ink cartridges for the Deskjet 2540. I will do my best to help you. I recommend the continuation of this entire HP document on cartridges. You can go to the website of HP SureSupply here, which shows the compatible ink for your printer cartridge (HP 61 black and tri-color 61).

  You can also buy these cartridges on this Web site. If you have any further questions, please let me know. Have a good night!

• Suddenly, my 4215 all in one HP printer error message reads "remove and check right cartridge".

  My all-in-one 4215 printer suddenly flashes an error message on the screen saying "remove and check right cartridge"... For what I'm checking, it is unclear. I deleted and reinstalled the cartridge and it seems OK to me... It is not empty, and the last thing that he printed was fine... Help!

  I am betting that the printer or the ink cartridge contacts are dirty. This happens over time. The document below will guide you through cleaning the contacts. Let me know what happens.

  http://goo.GL/9oXc9

• F2110 All In One HP: Printer prints blue instead of green

  I have an All In One older printer that worked perfectly for me. I tried to print something last night and every time the green color was susposed to print blue print instead. I replaced the color cartridge and still have blue instead of green. I tried everything I can think but can not get the printer to print in green. The strange thing is that I photocopied a picture with lots of greenery and it printed perfectly green.  Any ideas will be greatly appreciated.

  Hi @andalcam,

  Thanks for joining the Forums of HP Support for a solution to your printing problem.

  I understand that you use a printer all-in-one of HP Deskjet F2110 with computer Windows 10 and green print blue, but the colors are just when you copy. I would like to help with that.

  The fact that it can copy well little indicates that the printer should work. Here is a document of support designed to be used with this problem so you can be sure - colors wrong.

  Then download and run the HP print and Scan Doctor to verify installed software. This tool can diagnose and solve many problems of printing software and printer.

  Please let me know if that solves the problem, or if you need assistance.

• HP Deskjet All in One 3545: printing problems

  1 shows low ink icon. A left less, just half. Thought b & w cartridge is low. Ordered and this has changed. Print an alignment page. During the printing of new document, new alignment message came. Returned and gave the print order. Print a faint fary. Check the ink level. Right and left less. Stop printing. What needs to be done?

  2. when the printer is on, sound of NEEQ move is not smooth, little stumble.

  3. If put more than one paper in the tray, all are drawn in and then deported without no printing. Even place a paper displays the message that says to remove the paper and place it again in the status bar.

  4 visit to a mechanic charges are prohibitive.

  5. help online?

  6 resets useful?

  7 printer is in mode (wi - fi) network

  Hey @Achyut18,

  I understand that you have some problems with the printing of your Deskjet Ink Advantage 3545 e-all-in-one printer. I can help you with that.

  To start, make sure that the printer is plugged directly into a wall outlet , not a surge protector. Once it's done this document describes How to solve print quality problems with your printer. If after completing the document, you still have problems with print quality, then the cartridge will need to be replaced. Please find below the link to contact HP support.

  It seems that you may have had a problem with collection of paper in the printer. This document explains How to solve problems of choice. If after completing this coument you are still experiencing problems with pulling on the paper then the printer will need to be replaced. Please find below the link to contact HP support.

  If you are looking for other support options, from real cartridges not refilled to replace, or if the printer needs to be replaced so you can contact HP support directly by clicking here and filling out the form below.

  I hope this helps with your problems and I hope you have a great week!

  If this solves your problem then please help others to find this post by clicking on accept as Solution on my post.

  If you appreciate my help so please let others know by clicking on the icon below my post thumbs up.

• How can I keep my HP1510 all-in-one to print the test pages as much?

  How can I keep my HP1510 all-in-one to print the test pages as much? My printer is connected to my laptop, and it seems that whenever I disconnect, want the printer print a test page when I reboot. I don't know where the option is to disable this option.

  Pages are likely alignment pages.  When a new cartrdige is installed the printer will print an alignment page which should be placed on the scanner glass and press the button of scan to complete the alignment process.  If the alignment is not complete it will repeat when the printer is powered suite or maybe at the end of print jobs.

  The alignment page will stop printing when the alignment process is complete.  See the page here for more information.

• HP All in One deskjet printer: X HP

  I have my HP all in one Deskjet Printer 3522 programmed to Eprinting from my cell phone wireless. I want to add a second computer to wireless network for Eprinting.  What are the steps to add the second computer.

  I had taken these measures as soon as possible.  As stated earlier I just needed to create the homegroup and get matching password on both computers. Once everything very easy, I determined the steps to follow. Printer works on both computers.

• Dell 964 all in one Photo Printer not Scan

  I have a desktop Dell Dimension 3100/E310 with a Dell 964 All In One Photo Printer.  I have Windows XP on it.

  I had to re - install the printer drives and software.  I can get the documents to print correctly.  I can get the printer to scan by using the controls on the printer.  However, if I try to scan from the Dell 964 all in one Center on the computer, I get an error message that says:

  Scan failed

  Try these solutions:

  * Make sure the all-in-one is powered.  (IT IS).

  * Disconnect and reconnect the USB cable.  (I DID.)

  * Disconnect, then reconnect the power cable from the all-in-one.  (I DID.)

  * Restart the computer. (I DID.)

  Nothing has worked.

  Does anyone have any suggestions?

  Thank you.

  ColemanCreative,

  You should be able to scan from the Dell all-in-one Center.

  Make sure that the application that you want to scan to figure on the list. Try to read...

  Update of the list of applications to send scans to

  If you are trying to scan to a PDF or by fax, you must install the OCR program from the disk of the printer.

  In the digitization, if you have the disc that came with the printer, and then insert the floppy disk to the printer and keep it from running. Go to my computer and double-click it. Locate the drive that contains the disk Dell inside. Right-click on it, left click Explore. Find the folder of the OCR. In the OCR folder, there is a folder of Abbyy. Right click on setup.exe, which is located in the folder Abbyy and left, click Run as administrator. This will install the OCR program.

  Rick

• OfficeJet Pro 8600 N911a: How can I determine which cartridge needs to be replaced?

  I installed an update to Windows Pro 10.  Now, I can't say what ink cartridges need to be replaced.   What happened to the apps that gave me the ink level?

  Hello

  Same software offered fow Windows 10.

  What are the results when you try to launch the HP Officejet Pro 8600 application?

  In addition, you can check the level of ink on the screen of porinter as shown below:

  http://support.HP.com/us-en/product/HP-OfficeJet-Pro-8600-e-all-in-one-printer-series---N9/4322914/model/4323658/document/c02876509/

• What ink cartridge needs to be replaced

  Photosmart HP 5520.  How can I know what ink cartridge needs to be replaced or should all be replaced at the same time please?  I've already replaced the black one.

  Here, the document shows how to check the ink levels of the façade (in two solution).

• HP all in one remote printer with printer deskjet 6600

  I don't have the option more to save my file scanned in pdf format, that it automatically saves it as a jpeg file?

  Yes, I know you are trying to scan. Did you follow my instructions? I was able to record successfully a file scanned to PDF on my updated Samsung Galaxy Tablet. Again, please follow the steps listed below:

  1. open your HP all in one Application

  2. click on the Scan option

  3. analyse the desired file

  4. you will notice it auto saves in jpeg format, click now in the top corner right on the settings option

  5. now, click and save the file in pdf format

  6. now gives you the ability to rename the scan

  Thank you

• Does not work HP C7280 all-in-One re ink cartridge to expire-pressing 'OK' to activate printing

  All-in-One HP C7280: received message that ink cartridge is about to expire. In order to '... continue with this ink' (it has not yet expired), I pressed 'OK', but nothing happened (the message is not 'disappear' from the screen"and I am not able to print. I turned the printer off-and-two times but nothing helped. The "OK" button worked, even if, to lead to the elimination of a message previous concerning a different ink cartridge havingactually has expired.  Suggestions?

  Thanks for the info. I'll try your tactics by chance discovered when the problem recurs. I finally gave in and changed ink cartridges--lost some of the expensive ink HP - as I had to print a document on this printer as the other was not available.

• HP Officejet 6600 printer cartridge jam

  Hi, we have a new x 6600 MODEL CZ155A. The transport of ink is stuck and stuck on the right, where it is inaccessible. We tried to turn the printer, then on; also tried to manually shift as transportation, but you can't get a hild on it because it is hidden behind the frame of the case (the ink cartridge door does not extend across the width of the printer. Youone can help? Thank you very much!

  The best thing you can do because the printer is still fairly recent, is call technical support.  The problem you are having is that the printer needs to be replaced to fix and how best to do, it is a support technique contact directly.  You then access 1-800-474-6836 the Canada and the United States, click on users international here.

• Office Jet 6600: printer cartridge not recognize

  "I get the following message is displayed on my printer" print head seems to be missing, not detected, or incorrectly installed.  I followed all the instructions on how to solve this problem, but nothing works.  I read once that if the problem persists there is no solution and place the printer needs to be replaced.  Can anyone confirm this or yo know a fix?

  If the printer does not clear the error message reset you need a new printer.