663213-001 - USB 3.0

Similar Questions

• USB 3.0 adapter 663213-001.

  As for the web site of hp http://partsurfer.hp.com/ShowPhoto.aspx?partnumber=663213-001

  I would like to know the use of the small adapter (male 9 pin/blue connector as pictured) is there any part number for this card? and you know if I can order this card only?

  Thank you

  Charlzz

  Hi Charlzz,

  Please see this information from HP.  I don't see a separate room for the adapter number.  Newegg must USB 3 adapters USB 2.

• HP USB 3.0 SuperSpeed PCIe x 1 card does not install on HP 8200 Elite SFF

  I buy the HP USB 3.0 Super speed PCIe x 1, QT587AA card.

  I have istalled the card in a HP 8200 Elite SFF, Windows 7, 64 bit. Connected to power auxiliary esata.

  After installing the drivers from the CD, I get a message from ball of Windows indicating the software device driver has not been installed successfully. When I look in Device Manager I see the yellow triangle next to the (USB) Universal Serial Bus controller under other devices, and when I go into the properties of this status is driver not installed (code 28).

  I have the latest BIOS v2.15.

  Info from map:
  P, 3.0(2x2) USB SuperSpeed PCIe x 1 card
  CPL REF: 661320-001
  SPN: 663213-001
  IAW REF: HI343-1
  CT: PCFKCOAAB1S1HL
  Rev A

  Any ideas?

  Simple answer: not compatible with the 8200 series by the HP Web page.

  See: http://h10010.www1.hp.com/wwpc/uk/en/sm/WF06c/A1-329290-332469-3965933-3965933-5153600-5153603.html

• Pavilion HPE-560z: Pavilion Elite Desktop - replacement of the memory card reader

  Hello

  My memory card reader began acting after 5 years of use. It detects the media all right, I can see the list of files, but when you copy them, the LED will market and file transfer is extremely slow. I would like to replace the card reader.

  Anyone know which internal drive is insert in the case of my hpe-560z Fund? Can we all 3.5 "card reader or there are specific requirements to pay attention to the?

  Thank you.

  Hello

  Please ysé part number from the following link:

  http://PartSurfer.HP.com/search.aspx?SearchText=XX094AV

  who is 575842-001 for Memory card reader-15 IN 1, slot 4.

  You can buy through top of store or try at Amazon:

  https://www.Amazon.com/HP-575842-001-USB-15-in/DP/B004A8JIO2

  Kind regards.

• Mounting USB keyboard freezes internal keyboard and trackpad

  Hello world

  Spent an hour looking for a solution to this so I hope this isn't a problem of repetition. I am using a wired USB keyboard (DYNEX model No.: DX-WKBDSL) with my MBP end 2011, but whenever I have set and keyboard Setup Assistant appears my internal trackpad immediately stops responding and my internal keyboard sounds fair to me if I tap on a button. This keeps me from hitting continue setting. If I unplug the USB keyboard, I immediately regain control of my internal input devices. Disks hard USB and flash drives cause no problems. I need to be able to use my usb full keyboard, so I have a 10 key. Can someone help me?

  I noticed the guys like the thing EtreCheck here so I just ran on my machine (obviously without my keyboard usb attached since that would freeze everything). I hope that helps!

  EtreCheck version: 2.9.13 (267)

  Report generated 2016-08-18 10:55:47

  Download EtreCheck from https://etrecheck.com

  Time 04:12

  Performance: good

  Click the [Support] links to help with non-Apple products.

  Click [details] for more information on this line.

  Problem: Another problem

  Hardware Information: ⓘ

  MacBook Pro (13 inch, late 2011)

  [Data sheet] - [User Guide] - [warranty & Service]

  MacBook Pro - model: MacBookPro8, 1

  1 2.8 GHz Intel Core i7 CPU: 2 strands

  4 GB of RAM expandable - [Instructions]

  BANK 0/DIMM0

  OK 2 GB DDR3 1333 MHz

  BANK 1/DIMM0

  OK 2 GB DDR3 1333 MHz

  Bluetooth: Old - transfer/Airdrop2 not supported

  Wireless: en1: 802.11 a/b/g/n

  Battery: Health = Normal - Cycle count = 588

  Video information: ⓘ

  Intel HD Graphics 3000

  Color LCD 1280 x 800

  Software: ⓘ

  OS X El Capitan 10.11.6 15G (31) - time since started: about 31 days

  Disc information: ⓘ

  APPLE HDD HTS547575A9E384 Disk0: (750,16 GB) (rotation)

  EFI (disk0s1) < not mounted >: 210 MB

  Recovery HD (disk0s3) < not mounted > [recovery]: 650 MB

  Macintosh HD (disk 1) /: 748,93 go-go (559,33 free)

  Storage of carrots: disk0s2 749.30 GB Online

  MATSHITADVD-R UJ - 8À8)

  USB information: ⓘ

  Computer, Inc. Apple IR receiver.

  Apple Inc. FaceTime HD camera (built-in)

  Apple Inc. Apple keyboard / Trackpad

  Apple Inc. BRCM2070 hub.

  Apple Inc. Bluetooth USB host controller.

  Lightning information: ⓘ

  Apple Inc. Thunderbolt_bus.

  Guardian: ⓘ

  Mac App Store and identified developers

  Kernel extensions: ⓘ

  / System/Library/Extensions

  com [no charge]. ZTE.driver.ZTEUSBCDCACMData (ZTEDriver_MacV1.3.9 - 2016-07-18) [Support]

  [no charge] com.devguru.driver.PTUMWDrv (1.2.64230.128 - 2016-07-18) [Support]

  [no charge] com.lge.driver.LGEMobilSolutionFamily (1.5.4.0421 - 2016-07-18) [Support]

  [no charge] com.novatelwireless.kext.wwan (v3.0.24 (001)-2016-07-18) [Support]

  [no charge] com.pantech.driver.PTRayUSBFamily (1.1.7.0616 - 2016-07-18) [Support]

  com.sierrawireless.driver.SierraDevSupport [no charge] (2.0.2.0 - 2016-07-18) [Support]

  com.sierrawireless.driver.SierraFSCSupport [no charge] (2.0.2.0 - 2016-07-18) [Support]

  com.sierrawireless.driver.SierraFSRSupport [no charge] (2.0.2.0 - 2016-07-18) [Support]

  com.sierrawireless.driver.SierraHSRSupport [no charge] (2.0.2.0 - 2016-07-18) [Support]

  com.smithmicro.driver.SMSIWirelessModem [no charge] (3.2.7 - 2016-07-18) [Support]

  /System/Library/Extensions/LGEMobileSolutionFamily.kext/contents/plugins

  [no charge] com.lge.driver.LGELTEBus (1.5.4.0421 - 2011-06-21) [Support]

  [no charge] com.lge.driver.LGELTEMdmControl (1.5.4.0421 - 2011-06-21) [Support]

  [no charge] com.lge.driver.LGELTEMdmData (1.5.4.0421 - 2011-06-21) [Support]

  [no charge] com.lge.driver.LGELTENicControl (1.5.4.0421 - 2011-06-21) [Support]

  [no charge] com.lge.driver.LGELTENicData (1.5.4.0421 - 2011-06-21) [Support]

  /System/Library/Extensions/NovatelWirelessWWAN.kext/contents/plugins

  com [no charge]. NovatelWireless.driver.NovatelWirelessUSBCDCECMControl (v3.0.24 (001)-2011-06-21) [Support]

  com [no charge]. NovatelWireless.driver.NovatelWirelessUSBCDCECMData (v3.0.24 (001)-2011-06-21) [Support]

  [no charge] com.novatelwireless.driver.3G (v3.0.24 (001)-2011-06-21) [Support]

  [no charge] com.novatelwireless.driver.3GData (v3.0.24 (001)-2011-06-21) [Support]

  [no charge] com.novatelwireless.driver.DisableAutoInstall (v3.0.24 (001)-2011-06-21) [Support]

  [no charge] com.novatelwireless.driver.NWVBE (v3.0.24 (001)-2011-06-21) [Support]

  /System/Library/Extensions/PTRayUSBFamily.kext/contents/plugins

  [no charge] com.pantech.driver.PantechBus (1.1.7.0616 - 2011-06-21) [Support]

  [no charge] com.pantech.driver.PantechCDFree (1.1.7.0616 - 2011-06-21) [Support]

  [no charge] com.pantech.driver.PantechCm (1.1.7.0616 - 2011-06-21) [Support]

  [no charge] com.pantech.driver.PantechMdmControl (1.1.7.0616 - 2011-06-21) [Support]

  [no charge] com.pantech.driver.PantechMdmData (1.1.7.0616 - 2011-06-21) [Support]

  [no charge] com.pantech.driver.PantechSer (1.1.7.0616 - 2011-06-21) [Support]

  [no charge] com.pantech.driver.QmiDriver (1.1.7.0616 - 2011-06-21) [Support]

  /System/Library/Extensions/PTUMWDrv.kext/contents/plugins

  [no charge] com.devguru.driver.PTUMWCDFree (1.2.64230.128 - 2011-06-21) [Support]

  [no charge] com.devguru.driver.PTUMWCSP (1.2.64230.128 - 2011-06-21) [Support]

  [no charge] com.devguru.driver.PTUMWDIAG (1.2.64230.128 - 2011-06-21) [Support]

  [no charge] com.devguru.driver.PTUMWMdmControl (1.2.64230.128 - 2011-06-21) [Support]

  [no charge] com.devguru.driver.PTUMWMdmData (1.2.64230.128 - 2011-06-21) [Support]

  [no charge] com.devguru.driver.PTUMWUSBMergeNub (1.2.64230.128 - 2011-06-21) [Support]

  /System/Library/Extensions/SMSIWirelessModem.kext/contents/plugins

  com.smithmicro.driver.SMSIWirelessCDC [no charge] (3.2.7 - 2011-06-21) [Support]

  com.smithmicro.driver.SMSIWirelessSerial [no charge] (3.2.7 - 2011-06-21) [Support]

  Launch system officers: ⓘ

  [loaded] 8 tasks Apple

  [loading] 145 tasks Apple

  [operation] 63 tasks Apple

  [killed] 22 tasks Apple

  the 22 killed process lack of RAM

  Launch system demons: ⓘ

  com.Apple.Security.syspolicy.plist [failure]

  [loaded] 48 tasks Apple

  [loading] 150 tasks Apple

  [operation] 80 tasks Apple

  [killed] 12 tasks Apple

  12 killed process lack of RAM

  Launch officers: ⓘ

  [no charge] com.adobe.AAM.Updater - 1.0.plist (2014-02-01) [Support]

  [loading] com.google.keystone.agent.plist (2016-07-11) [Support]

  [no charge] com.oracle.java.Java - Updater.plist [Support]

  [operation] com.rosettastone.rosettastonedaemon.plist (2014-12-26) [Support]

  [loading] org.macosforge.xquartz.startx.plist (2014-08-11) [Support]

  Launch demons: ⓘ

  [loading] com.adobe.SwitchBoard.plist (2012-06-10) [Support]

  [failure] com.adobe.fpsaud.plist (2016-06-13) [Support]

  [loading] com.google.keystone.daemon.plist (2016-07-11) [Support]

  [loading] com.microsoft.office.licensing.helper.plist (2010-08-25) [Support]

  [no charge] com.oracle.java.Helper - Tool.plist [Support]

  [loading] org.macosforge.xquartz.privileged_startx.plist (2014-08-11) [Support]

  User launch officers: ⓘ

  [loading] com.adobe.AAM.Updater - 1.0.plist (2012-06-10) [Support]

  [loading] com.adobe.ARM. [...]. plist (2013-11-11) [Support]

  [loading] com.adobe.ARM. [...]. plist (2015-05-19) [Support]

  com.apple.CSConfigDotMacCert [fail]-[...] @me.com - SharedServices.Agent.plist

  [operation] com.spotify.webhelper.plist (2016-07-05) [Support]

  [loading] com.vladalexa.MagicPrefs.plist (2016-07-18) [Support]

  Items in user login: ⓘ

  smcFanControl Application (/ Applications/smcFanControl.app)

  Workflow application (/ Applications/Flux.app)

  Stickies application (/ Applications/Stickies.app)

  Other applications: ⓘ

  [operation] com.adobe.PDApp.AAMUpdatesNotifier.65632.B69CDC4F-01B7-4A73-8B33-DA81B56745F1

  [ongoing] com.eidac.smcFanControl2.63392

  [ongoing] com.etresoft.EtreCheck.108192

  [ongoing] com.microsoft.Excel.55392

  [ongoing] com.microsoft.Office365Service.60192

  [ongoing] com.microsoft.Word.56032

  [ongoing] com.Microsoft.AutoUpdate.FBA.2912

  [ongoing] org.herf.Flux.88992

  [loading] 435 tasks Apple

  [operation] 177 tasks Apple

  [killed] 39 tasks Apple

  Plug-ins Internet: ⓘ

  AdobeExManDetect: AdobeExManDetect 1.1.0.0 - SDK 10.7 (2014-02-01) [Support]

  FlashPlayer - 10.6: 22.0.0.192 - SDK 10.9 (2016-07-06) [Support]

  QuickTime Plugin: 7.7.3 (2016-07-18)

  AdobePDFViewerNPAPI: 11.0.11 - SDK 10.6 (2015-05-13) [Support]

  AdobePDFViewer: 11.0.11 - SDK 10.6 (2015-05-13) [Support]

  Flash Player: 22.0.0.192 - SDK 10.9 (2016-07-06) obsolete! Update

  Default browser: 601 - SDK 10.11 (2016-07-18)

  SharePointBrowserPlugin: 14.4.5 - SDK 10.6 (2014-10-28) [Support]

  Silverlight: 5.1.40728.0 - SDK 10.6 (2015-09-28) [Support]

  DirectorShockwave: 12.2.0r162 - SDK 10.6 (2015-08-31) [Support]

  JavaAppletPlugin: 15.0.1 - 10.7 (2016-07-20) check the version of the SDK

  Safari extensions: ⓘ

  AdBlock - BetaFish, Inc. - https://getadblock.com (2015-11-22)

  3rd party preference panes: ⓘ

  Flash Player (2016-06-13) [Support]

  MagicPrefs (2012-10-17) [Support]

  Time Machine: ⓘ

  Time Machine not configured!

  Top of page process CPU: ⓘ

  7% com.apple.WebKit.WebContent (4)

  4% safari

  kernel_task 2%

  1% WindowServer

  1% systemstatsd

  Top of page process of memory: ⓘ

  754 MB com.apple.WebKit.WebContent (4)

  523 MB kernel_task

  Safari of 303 MB

  Mdworker (10) 123 MB

  90 MB softwareupdated

  Virtual memory information: ⓘ

  68 MB free RAM

  used 3.93 GB RAM (620 MB cache)

  406 MB used Swap

  Bumping this because I really need an answer.

• ID3 tags to change during the transfer on USB

  When my iMac to transfer on a USB mp3 tracks, the ID3 tags are somehow get reversed. My car stereo then displays the correct track number, but plays and the false name of audio and the railway. In this particular case, I try to transfer an audiobook with 66 chapters. I named the files 001, 002, etc. in order to read in the correct order. ID3 tags are named Chapter 1, Chapter 2, etc. I can't understand why so, when read in my car, it will show track 001, but read the audio Chapter 4 and show Chapter 4. The funny thing is, does it only on my Mac. If I transfer files from my Mac to work they correctly and display all the correct information. I tried to copy from iTunes and from the finder directly and pass the ID3 info in both directions; They even produce different results, but both are mixed up. Any help would be much appreciated. Thank you!

  I don't know how to copy the files on your player could possibly change the iD3 tags.  They are part of the file, and it would be like saying take a book on a shelf and put it in a box caused some pages from the book to the book.  Are you sure that the track numbers you see are the real file names?  I think the most likely is despite the naming convention of the file that you are using your player somehow files out of use.  I imagine that you have provided the correct order in the track number and if there are a number of disk that it conforms to the order you want too.

• Z210 Convertible Minitowers: Z210: a USB 3.0 card 4 ports compatible?

  I have an Z210 convertible minitour, who currently holds the HP 2 port USB3 SuperSpeed card that is based on the older NEC chipset. It sits in the Slot 3, a PCIe2x1 slot.

  I know that the NEC chipset is pretty old now. But the real problem is that I need a few USB3 ports. I saw a thread here that has considered this question, but does not really all specific maps, and it was related to the Z400, another machine.

  I have had a look and it seems that many tech enterprise vendors offer a card, the CP-4PTU USB 3.0 4-Port PCI Express Card (PG0480) anyone know if it will work in the Z210? Other possible cards?

  TIA!

  Map of NEC had two exits USB3.  HP went with a 4 ports TI chipset based '2 + 2' PCIe card for Z400/Z600/Z800 workstations.  The 2 + 2 means two aft and two if you want to forward.  Z620/Z820 integrated this same TI chip on the motherboard.  Thus, drivers for chips Z620 TI of these workstations work very well for the card on motherboard both chipsets on PCIe.

  I use these TI cards based on my workstation xw6400 and xw6600... they work very well, and I plug them into the second port of PCIe x 16 spare for the max bandwidth of PCIe type II location in the xw6600.  The xw6400 has no connectors all PCIe gen II, however.

  The rear bottom of basket of the map has two ports for two accessories USB 3.0, and there is an addition of port Unified on the map (front) which you can plug a double cable end adding two more USB 3.0 ports (front).  I love the face cards Akasa... high quality and more than enough before long.  They have one that fits great in the floppy bay area and also one for the wider Bay optical since many work stations now do not have a floppy bay site.

  These cards must be powered with a good 5V power from a SATA power supply or a power Molex adapter... do not load software until you give it only + 5V power because some parts will be not visible by the installation program until they are turned on with adequate power.  + 5VDC is not upward on the map of the PCIe slot... only of the power cable.  I'm actually using an adapter less amperage from the floppy power plugs in my xw workstations, but for higher use AGP, I would recommend the spare Molex or SATA Adapter approach.  You can find these like a map without adapter via eBay sometimes... the complete kit of HP is about 50,00.  Search with google for QT587AA for the complete kit of HP.

  What you don't want to... version 2 ports of NEC.  It is the + 5V power supply to the back of the map that you see here, and only two USB 3.0 ports are possible.  This is in contrast to the version of TI chipset below this image of the NEC version:

  

  The TI version is below... There the power plug at the top and the front port double its rear end, below these two capacitors:

  

  You will see that the front bay Akasa kits include a single outlet that feeds on the back of the card via two cables on two USB3 ports.  Eventually you throw this little adapter that see you at the bottom of the picture near the Middle, generally.

  Here is the HP part number, you can use to search on eBay... you'll usually only find the card on eBay, not kit.  HP power supply cable can be very useful to have, and I've seen those if you buy the kit from HP directly.  Otherwise, you will have to dink with other adapters.  The latest drivers are easier to find on the site of HP Z620 drivers.  Part of HP for the card number is only 661320-001.

• NEITHER USB 6008 AI acquisition and generation of pulse

  Dear users of LabVIEW,

  Greetings for everyone. I am a beginner of LabVIEW and I have a problem that I solved partially. I would really appreciate your help and suggestions that I searched for days without a bit of luck. The problem is as follows:

  I am the acquisition of tension HAVE (continue) 4 to 8 accelerometers. In the meantime, I send you a digital output signal each time when you click on the sampling frequency (i.e. 1000, 2000, 3000,...) If the sampling rate is 1000). In other words, try to send a signal of output digital (at a frequency n Hz) at intervals of 1 second (depending on the material). To make the digital output signal begins to blink a LED every one second. In addition, I need to write signals (voltage) AI and the LED blink timestamps PC (software) separately. All stages of the above are followed in my .vi program, but the real hardware/software level operations kill my timestamps. In other words each LED flash timestamps are not accurate, when I use LabVIEW measurement file express VI (the difference is not at least to the third decimal). In addition, the timestamp is kinda OK when I disable the file LVM write VI. Onemore thing I've noticed is that physically the LED blinks every second two times, I feel it's because of the shift register and loop delay of a second. Is there a way to control the speed of blinking (i.e. Boolean State must change to every 500ms without delaying the inside while loop).

  Results and comments:

  LabVIEW 2011 .vi, timestamp of files with or without generator of LVM (express VI) files are all attached. Please note that there is a considerable amount of drift in the consecutive timestamps when the file LVM generator is used, on the other hand there are derivative of 0.001 ms when the file LVM generator does not. The reason for horodateurs PC have is about aligning the various measures or observations or events to global time scale.

  Please give me any suggestions or help me do at least accurate to milliseconds in VI of witten. Finally, is there any USB DAQ module relatively inexpensive which allows to send an impulse to directly from channel impulse of output digital channels when the "n" sampling frequency Hz is obtained by level of material which could all be accurate, so that the software timer is completely reduced to a minimum. Although there are very material sophistiated of NOR, but our goal of this project is to build and test the system profitable.

  Thank you and I really appreciate your time and effort inavluable. Have a great weekend!

  Just change the samples to the constant playback at the entrance of the DAQmx Read.vi from 1000 to 500.

  Lynn

• USB 3.0 of ENVY dv6t ports need to be replaced

  My daughter dropped her cell phone that has damaged the USB 3.0 ports (had bluetooth receivers connected to them that were broken).  I need to replace the physically damaged USB ports.

  These ports on the system board or are they on a surfboard USB (part #682087-001)?   I can't determine what parts I need.

  THANKS for any help / clarity

  JoniB wrote:
  

  My daughter dropped her cell phone that has damaged the USB 3.0 ports (had bluetooth receivers connected to them that were broken).  I need to replace the physically damaged USB ports.

  These ports on the system board or are they on a surfboard USB (part #682087-001)?   I can't determine what parts I need.

  THANKS for any help / clarity

  Hello

  USB ports on the right side of the laptop (I'm guessing that the Dv6-7000 series) are on the usb card you mention. However, unfortunately, the left side is a part of the motherboard and the jury must be replaced to make them work.

• HP 15 laptop: USB Ports not working not

  I have 3 USB port of the system, 2 do not work. A job is next to LAN port on the left side.

  So I think that my first impression is confirmed. You have a Board bad usb.

  (7) Council USB (includes cable) 749649-001

  Your repair manuals

  See p. 70. It is a very complex replacement. That's why I asked if you are under warranty.

  http://www.eBay.com/ITM/749649-001-ls-A993P-NBX0001JX00-genuine-HP-USB-Board-W-cable-15-R-15-R263DX-/291504724137?hash=item43df0918a9:g:kooAAOSwMmBVkwpv

  If it's 'the Answer' please click on 'Accept as Solution' to help others find it.

• Problem connecting USB 34410

  Hello

  I'm reading the values of Agilent 34410 A by USB using usbtmc module.
  I have successfully installed the module with output of cat/dev/usbtmc0

  Minor product manufacturer serial number
  Agilent Technologies 34410 001 has digital multimeter MY47027713

  I followed the http://cp.literature.agilent.com/litweb/pdf/5989-8744EN.pdf document
  but for steps 5, 6 and 7, the multimeter will beep and its panel shows a
  message 'ERROR of DISTANCE' and it hangs.

  Can someone tell me what is this problem?

  Thank you

  gokussj9 wrote:

  None of them even echo INT CAL:ZERO:TYPE > usbtmc1/dev / seems to work.

  I feel the same beep error.

  :SYST:PRES DEF>/dev/usbtmc1 says command not found
  

  Orders in the linked file is a U2000 power not to the 34410 counter sensor.

  I suggest that you open the help file for the 34410A and discover what SCPI commands it uses.

• ENVY of HP dv7-7265er - USB ports on the right side does not

  Test of the UEFI BIOS (after update F.10 F.29)

  Check USB port: FAILURE

  FAILURE ID: QWB664-6GX74K-QFPK0K-8D1W03

  PRODUCT ID: C6D03EA #ACB

  Hello

  Please find the link manual below the part number is USB card (includes cable) 681986-001 & check the page numbers 73 component replacement procedures.

  http://h10032.www1.HP.com/CTG/manual/c03591253.PDF

• Linux USB-6218 PWR/ACT LED is off

  Hello world

  I recently bought a multifunction DAQ USB-6218 and installed all the software for it (that is, nidaqmxbase and nation).

  When I connect the device to my computer, I don't see the light / activity blinking as my other hardware DAQ USB-6008.

  tog@home ~ $ lsusb
  Bus 002 Device 003: ID 8086:0189 Intel Corp.
  Bus 002 Device 008: ID 18d1:4ee2 Google Inc. Nexus 4 (debug)
  Bus 002 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub
  Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
  Bus 004 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
  Bus 003 Device 008: ID 3923:7269 National Instruments Corp.
  Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
  Bus 001 Device 005: ID 1bcf:2b81 Sunplus Innovation Technology Inc.
  Bus 001 Device 004: ID 138a:0011 Validity Sensors, Inc. VFS5011 Fingerprint Reader
  Bus 001 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub
  Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
  

  lsdaq

  tog@home ~ $ lsdaq
  --------------------------------
  Detecting National Instruments DAQ Devices
  Found the following DAQ Devices:
  --------------------------------
  

  Run sudo FWUpdate does list all the devices.

  Thanks in advance!

  
  

• USB port on the front

  I have a HP S5 1020; 2 USB 2.0 ports before were damaged and must be replaced. I can't find a looking for a replacement part number. Any help would be greatly appreciated.

  According to PartSurfer from HP , the part number is 644492-001. (Card Reader - 6 1 comb, FIO (2USB + HP) + IR + WLAN Pirate).

  It can be found by Google here   there   somewhere   anywhere

• When downloading music from Media Player on a USB key, how to get music aired in the order I put them on the list of synchronization?

  I find that when I play the USB in my car stereo, all the parts play in the order in which I originally recorded my media player CD.  I drag synchronize them in the order that I want but they play seemingly at random, but I think it might be chronilogical order of their recording in Media Player.

  Hello Warner,

  The best way I found to do this is to create folders on the USB drive and then use a different folder for each album of the music.
  If you want music in a particular order, change the name of the file to include a 001 at the beginning, for example, 001 - songname.mp3 music
  Do this for all the tracks in the order you want and software of the car detects the number and play music in that order.
  I hope this helps.