Qosmio G30 - keyboard shown on display

Similar Questions

• Display and boot on Qosmio G30-117 problems

  Hello

  My Qosmio G30 (117) has problems to start. Basically the Qosmio title displays properly, but as soon as Windows XP appears, it is as a grid of white dots on the screen. He will then drain and take forever to get into windows. The grid of points remains all the time.

  My hypothesis is that sound my display driver, but get an update is a challenge. When I try to download from the page drivers it says that there is none. The search is based on the model of my PC, it should be no wizard

  I can't get into XP in safe mode.

  Real question is, is this my driver or is this a hardware problem?

  Thanks for your help,
  Peter

  Hi guy,

  that looks a little a hardware problem but before we get into it, you should download www.laptopvideo2go.com drivers (Please read the FAQS on this site!) and then, if the problem persists after installing new drivers, you must contact a local authorized toshiba service.

  I give you a link if you really want to contact an ASP (Authorized Service Partner):

  http://EU.computers.Toshiba-Europe.com/cgi-bin/ToshibaCSG/generic_content.jsp?service=EU&ID=ASP_SUPPORT

  Good luck buddy and good weekend

• Qosmio G30 display flickering and cannot connect to Windows

  I have to press F5 to make the visible display each time that I boot. I thought that it was a software related issue and I tried to format the drive with recovery CD original. However, the screen keeps flickering of the stage of the BIOS.
  Now, it's even worse. The screen flashes when the turning on and I cannot Ouvrezunesession Windows MCE after formatted HARD drive.

  After reading the FAQ and related articles, I suspect that it was a problem of graphics (hardware).
  My graphics card is NVidia Go7600. Is this true, and it's a must to change the hardware (graphics card)?

  Appreciate your advice before contacting the local support team.

  Thank you very much!

  Hello!

  That s a strange question. Do you have the same problems on an external monitor?

  If a display is flashing, the screen itself is faulty, the FL tube is the cause of the error. I think that is the best, when an ASP (authorized service provider) checks your Qosmio G30.
  Here you can find one:
  http://EU.computers.Toshiba-Europe.com-online decision-making supported downloads & => find an ASP.

  Good luck

  Good bye

• Qosmio G30-223: keyboard key '2' does not work in console/konsole/xterm in Debian

  Hello

  I installed debian on a qosmio g30-223, it works correctly except the key of a keyboard in console/konsole/xterm.
  Under KDE, all the keys work but when I'm under a console (without xorg), konsole or an xterm, the '2' key (shift + a) does not work.

  It is a french keyboard layout and a card keyboard fr-latin9. Before connecting, the key also works.

  Any ideas?

  Hi face,.

  I have gentoo with 2.6.17 kernel and windowmaker as office. I know this problem. Maybe it s an idea to check the file xorg.conf to map keyboard under X then to change the keymap under console as X replaces the console overview.
  If the worst comes to the worst, try "dpkg - reconfigure console - data ' to choose a new layout for your page layout.
  I think that there are more keymaps under the hull for french available key-layouts, just to play with it. :)

• Re: What is the model of default keyboard in a Qosmio G30?

  Hello
  I have a Qosmio G30-155 which I had arranged with additional partitions. Recently, I did a complete reinstall of Windows Vista, but I have not used the Vista DVD provided with my computer because it would destroy my partitions. So, I used a standard DVD of Vista. Everything works well except two questions: the computer is not responding to shortcut keys, or IR remote. Laptop infiltrates the IR signals, because when one presses a button on the IR remote control, a few lights in the remote and computer. However, nothing else happens.

  I installed several configurations of the packages 'remote control manager', "Added value package" and "Support" button, nothing helps.

  I checked the Device Manager, and my keyboard appears as a "PS/2 Standard keyboard. I guess that this setting is false, because this keyboard would not have access keys. So, this setting could be cause my problems.

  Can someone tell me which type of keyboard G30s were?

  Thank you and best regards

  I agree with Akuma
  There is no special keyboard drivers and those drivers are not needed.,.
  The Windows operating system, no matter if it of Vista or XP, uses the Microsoft keyboard driver.

  To enable the keys FN and Toshiba control buttons the VAP (value added package) must be installed

  You must ensure that you have chosen the correct drivers for the laptop G30.
  The G30-155 seems to belong to the series of PQG32E so chose exactly this model in the form of download number.

• Qosmio G30 - external display problem (HDMI)

  Hello

  I have Dell UltraSharp 2407WFP display with HDMI and DVI (with HDMI DVI converter) entry - I use HDMI as my primary connection. My Qosmio has NVidia 7600 Go card with the latest drivers provided by Toshiba for Vista 32 bit (version 7.15.10.9813).

  My monitor was working fine months ago (same thing with my HDMI TV) I had no problems - but now I have a constant flickering problem (goes black watch my office then becomes black again) computer laptop monitor and no image on external display at all and I get 'balloon' message in the taskbar that my display driver has stopped working and it recovers when I leave my HDMI cable.

  any ideas?

  Thank you
  Bran.

  Hi Brani

  It seems that the error comes from the display driver.
  Why you n t try to remove the old display driver and try to reinstall the graphics driver of the European driver Toshiba page
  You may notice some improvements.

  By the way; It might be useful to know that the Qosmio G30 supports the standard HDMI V1.1 (up to 1080i resolution).

  Good bye

• Qosmio G30 - there a way to display the temperature of the graphics card?

  Hello

  I've got Qosmio G30-10B. Anyone know if it is possible to obtain information on the graphics processor (GPU) temperature, unit? It has nVidia Go 7600 graphics card. Unfortunately, the nTune doesn't display the temperature. Any other application that could do the trick?

  Thank you.

  Hello

  Temperature, GPU monitoring tool? hmm I know on some graphics cards nVidia, you can find this information in the properties of the graphics card. But I m not sure if it of possible to see in the properties of the graphics card for laptops.

  On my desktop PC, I have installed applications RivaTuner. This tool is amazing, and you can control the various GPU parameters. But note!
  This tool is can change many settings of GPU and if anyone has any experience can damage the graphics card. So don t change anything if you don't know what you're doing!

  Concerning

• Update the display drivers for Qosmio G30

  I have a Qosmio G30-240, it will not play a game. I bought halo 2, but says I have to update my drivers, but there is no update I received new drivers of Toshiba but still the same problem. Display driver is NVIDIA g force 760 GB. Any ideas please?

  Hello

  As you know, the game can be played to laptop and desktop PC. Update driver for desktop PC is not so problematic and can be done more often than on laptops. Never force drivers of graphics cards to run with the best performance. For laptops, it can be problematic because greater performance is more heat inside the laptop. because of this laptop manufacturers can't offer display so drivers often but you can visit some u = independent pages like http://www.laptopvideotogo.com/

  You might find something there.

• Qosmio G30 - E10: display resolution changes from 1920 x 1200 to 1024 x 768

  Hello

  Display resolution of Qosmio G30 - E10 passes sometimes 1920 x 1200 (my default) to 1024 x 768 after returning from standby or Hibernation

  I run Vista Ultimate, most recent display of the download area of Toshiba driver.

  This happened at any time, but sometimes.

  Any solution to this situation of bases.

  Kind regards

  Uwe Meyer, Germany

  Hello

  It's really not easy to say why it happens. I think that it of difficult to reproduce this problem, because it happens that sometimes ;(
  You said you are using Vista Ultimate.
  Have you checked if this happens using the Vista OS since the Toshiba Recovery CD?

  It would be very interesting to know if this occurs on laptop with Toshiba to factory settings.

  I found a thread on a similar theme;
  Someone suggested to update the graphics driver.
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=22553&MessageID=82906

  Perhaps a graphic driver of the www.omegadrivers.net or www.laptopvideo2go.com might help.

• Bad resolution of Qosmio G30 - external display via the HDMI connection-

  Hello! This problem makes me crazy, please help if you can...

  I just bought a G30-102 and I am trying to use it with an external display via the HDMI connection. The problem I have is that the native resolution of 1920 x 1200 cut the edges of the screen and the quality looks terrible - its almost as if the entire screen is enlarged. I tried with a BenQ FP241wz initially (1080i is 1920 x 1200) and the Toshiba helpline could not find a solution either - even after painfully reinstall all the drivers, etc..

  Its been going on for so long, I thought I'd try it out with my HDTV instead, just to be sure it wasn't a monitor problem. So I tried with my Toshiba 32WLT66 - and come to find that it has exactly the same problem.

  All the display settings appear to be correct and the G30 is convinced that the result is correct, so I have now it is - don't you think not that this is a problem with my HDMI port?

  Please help, I'm a designer, and it is essential that I use the machine on a large screen. If it is a hardware of the G30 problem, I need to talk to Toshiba immediately replace or fixing.

  Hello

  I tested the Qosmio G30 (HD-DVD) with my LCD TV using a HDMI cable. Everything worked perfectly. As a first step, I put 1080i value in the settings of the BIOS and after following the instructions in the HDDVDGuide document under http://support.toshiba-tro.de/kb0/TSB6A01LH000LR01.htm

• Qosmio G30 - 102 error display

  Hello

  In the space of one morning my LCD screen went from showing slight quirks to unusable as follows: Notebook details on foot.

  -Green mottled on Windows XP desktop background
  -restarted Windows XP OK todesktop, entire screen begins to blink on/off every few seconds, Win XP MCE booted up OK well
  -distortion of the images on the screen
  -now just blocks of color colours: white, green, cyan, flashing text etc.

  This is visible in the BIOS from Setup menu. Secure boot does not end

  Tried to output for external monitor, but not on a signal so not lock external of image at all.

  Enjoyed any insght on the problem. Not sure if chip screen or video. Is either a setting value when approximately 2.5 years.

  The BIOS is the original version 1.60 ACPI cannot see enough screen to try an update.

  I tried reinstalling all components - hard drives, RAM, took out battery ran on sector etc.

  concerning
  David (in the United Kingdom, UK purchase a Qosmio)

  Qosmio G30-102
  PQG32E-01600VEN
  Series X66249xxxG
  Windows XP MCE

  Looks like the GPU has a problem.

  I would like to send the laptop to an ASP (authorized Service Provider) for repair. There is a list of the ASP on the Toshiba site.

• Display driver cannot complete installation on Qosmio G30-137

  I just bought qosmio g30-137 of the Germany. My laptop had a German version of windows and I installed winXP PRO Greek edition. I have a problem with the graphics card driver. I downloaded from the TOSHIBA site. While I do Setup search the driver files that does not exist and I can't complete installation. I would like to know if anyone knows where I can find a driver to complete the procedure or if anyone knows what the problem is and how I resolve?
  Also starting from TOSHIBA site some installation instructions that explain how to do the installation with the appropriate sequence. Also, I would like to know where I can find the chipset driver?

  Hello

  Have you installed the Windows from the original CD of Microsoft?
  Why you suggest that the graphics driver has a malfunction?

  I guess you can not complete the original installation of the Win operating system due to the RAID driver and graphics driver. This unit has been delivered with RAID function and you need to install the RAID driver at the beginning of the installation of the OS.

  In addition there is also an instruction and installation utility chipset on the Toshiba driver page.

• Qosmio G30-140 - cannot adjust the brightness of the screen on Windows 7

  Hello

  I installed Windows 7 on my Qosmio G30-140, but I can't adjust the brightness settings.
  Instead of allowing me to place the cursor on any position, I want that I'm stuck with only 3 steps which elect to.
  The last of them is way to bright and my eyes keep tear having to deal with this crazy amount of white, especially on white background.
  The other two are very, very dark.
  What is going on? I installed the right Nvidia drivers.
  Also, I can't adjust the brightness using the FN keys on my keyboard. They simply produce no result at all.

  Need help appreciated, I can't work like this.

  Thank you!

  Hello

  The brightness of the display can be controlled by the FN + F7 and Fn + F6.
  I think you should install the VAP and buttons of the Support of Flash memory card utility in order to get this to work!

  Check the added value Package and Support Flash Card which are released for Satellite L500 utility or new models of laptops.
  In my case it worked!

• Qosmio G30 - HDD2 not found after replacement

  The lack of HARD drive capacity, I replaced drive HARD n ° 2 (drive D :) on my Qosmio G30 with a bigger (640 GB instead of 200 GB).
  The startup is going well, Windows 7 starts immediately. But the HDD is not shown in the 'Computer' window (the replaced a used for shown).

  There is just the c drive and the DVD drive.
  Do I have to format the D: drive first? How can I check if the HARD disk hardware is OK.?

  thx a lot

  Ulrich

  Hey,.

  > Should I format the D: drive first?
  Yes, all new HDDs must be formatted first, until you can use it. Then go to the tool disk management in Windows, where all drives will be displayed. You should see the second HDD.

  Right-click on it and create all the partitions you want to and him format. After that, they will be displayed in my computer and you can use it. :)

• Qosmio G30-204 - upgrade of the WLAN card

  Hi people.

  I currently have an Intel pro/Wireless 3945ABG Network card in my laptop. If I had to upgrade to a newer version, which we'd be one of the newest and best for my laptop?

  And the new WiMax from Intel would work in the Qosmio G30 - 204?

  Hey Buddy,

  The antenna is placed under the cover of the display and cables are placed under the keyboard or with other words, they are connected to the wireless network card.

  By the way: an upgrade to the draft N standard is not possible. In my view an update of the WLAN card is not logical.