7 Enterprise USB Bootable Windows Setup does not

Similar Questions

• upgrade vista to 7, fails when you try to uninstall programs, windows setup does not

  Install Windows 7, but Windows Installer does not work.

  Recently, I received my upgrade to 7. I have a new Toshiba running Vista 32 bit. When I try to do the upgrade, I can't go past the part where certain software is uninstalled. The Windows Installer does not work. I'm now waiting to upgrade that I can't because of this. I tried every fix I found, but nothing works. I even tried to download and reinstall the installer, but I get an error code indicating that it does not apply to my computer. I would appreciate a response. I can't believe the issues that I'm with a laptop two month old.

  Hi sdslaw,

  Thanks for posting. Try the following.

  Click Start
  In the search box type 'cmd '.
  In the start 'cmd.exe' menu right click and select RunAs administrator.
  Now type: msiexec/regserver

  I hope this helps!
  Shawn - Support Engineer - MCP, MCDST
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think

• Cannot start Windows, Windows Setup does not detect the hard disk, Bootmgr is misiing

  I have a few problems on my laptop [Acer 3810 t]

  -The first problem
  My mobile give me screen "cannot start windows' who have 2 choices: run the Startup Repair tool and boot normally. I chose to fix it, but nothing happens and stuck "starting windows" and gives unmountable boot volume 'blue screen '. the Dungeon of blues screen appear (for laptop is a not restart). So I turned off my phone and turn it back on it. the "could not start" screen again and I chose to start normally. but the result is negative. My portable Dungeon cannot start windows. Because of that I am using the advanced boot option and choose all the boot type such asit cannot load the safemode, last configuration etc, but the result is the same, you cannot start windows. in safe mode, its stuck in loading fileinfo.sys. I do not give up to try again with the advanced boot option. until I have a bad situation. My laptop can only 1 file in safe mode and blues screen do not appear again (my laptop only return at the beginning of start or restart)

  -The second problem
  because it cant solved, I want to reinstall my laptop. My OS is Vista 32 bit (pre-installed). I want to install the new operating system, windows 7. I use Dsik Flash bootable USB to install Windows 7. But in the BIOS, it is detected as a USB HDD. So I set my BIOS to load USB HDD to the first order. the installation can be done, but only until the "start Setup" screen and its deadlock. I have it wait up to an hour, but nothing happens. So I'm going to BIOS, change SATA mode to IDE mode AHCI. Then load the USB and go "installation program start screen. but the new problem is the installation of window does not detect my hard drive. So I can not choose the place to install the operating system. I have to load the driver, but I did not. Again to load the configuration to AHCI and IDE, until I get my HDD can detected in IDE mode. So I think I can move easily, I choose custom installation and choose the hard drive to install the operating system. But unfortunately, at the beginning of the process, after choosing the OS, the Installer gives error if installation location the installation failed. (I forgot the error message)

  -The third problem
  So far, I can't spend 'startup begins' as well in mode IDE and AHCI. Also bootmgr in my hard disk is missing, so I can't go to move the startup repair or the startup option in my HDD as before

  What is the error code that you got with blue screen?

  I think that there is a problem with your drive HARD check that by contacting acer...

• Windows Setup does not load driver Marvell D20

  Hello

  Installation: D20, the Marvell controller are attached: 2xHDDs RAID1 and an Intel SSD in a RAID configuration.

  The machine was initially installed with Windows 8.1 (on RAID1 disks), most later improved to W10.

  After a recent, (unknown to me), Windows problem entered a loop 'ASR Preparation. "

  I tried to use USB to recovery, but he did not see the drives.

  At this stage, downloaded driver from Marvell of the lenovo Web site. Note that there is only the version W7/W8.

  Tried to load the driver in Windows (for Windows 10) recovery, the load was successful, but start DISKPART after that froze the recovery. (Also tried to integrate the driver using NTLite, which resulted in recovery of freezing at startup).

  Has given up trying to recover and created 10 Windows USB installation. When I'm at the stage of selection of drive installation and selected the pilot of the "Load driver" dialog, the installation get stuck and animation of course load just went on and on. Subsequently tried to create Windows 8.1 and same media to install Windows 7. Also, who is stuck on the step "load driver".

  During the tests, I tried using different USB (version 3.0 and 2.0) drives. Also downloaded the driver for the Marvell from another Web site, just in case. Tried resetting the BIOS with the default settings. Nothing helps.

  Any ideas?

  Thank you.

  Thanks for the reply, I thought I posted what the problem was, but apparently I forgot.

  The problem turned out to be the SSD. BIOS and Windows recognized, but as soon as I/o operations were made, the player brought to stall. Even the first test SMART said the player was healthy, but the after run the test again, he has not done, and the drive is completely dead. Remove the SSD brought the machine back to life.

  Thanks again.

• Acer E5 - 572G USB Bootable and CD does not work

  His new laptop, and when I try to install windows 8.1 using bootable USB stick or a CD none of them works. (Even after the change in the BIOS, disable startup, select devices to boot) Help, please!

  do it as I told you.

  UEFI only

• Windows Setup does not properly

  I have a unique problem with Windows® install. V 4.5.6002.18005 on windows vista ultimate sp2, the box that tells you this that orders and other information for the installer just appear if you want to see the box simply type "msiexec/Quiet" in a run dialog box and you'll see what I mean, but I get this box each and every time that an .msi file runs and tries to install. Help, please

  Note that I can't do a restore point because there are not. and I can't format and reinstall vista, I lost a few cds and do not have the money to replace the software that is currently on my system.

  Hi Seree1,

  It seems that your problem is similar, but differs from the original question. Please start your own question and provide the details of your problem so that we can help you.

  http://social.answers.Microsoft.com/forums/en-us/VistaInstall/threads

  Thank you.

  Debra
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think

• iTunes won't uninstall on my XP Professional version 2002. I get an error message that says that the Windows Installer does not work.

  Original title: itunes won't uninstall on my XP Professional version 2002.

  iTunes won't uninstall on my XP Professional version 2002.  I tried to delete all files from apple and it will let me delete the Apple software update.  I get an error MOUSSOKI that says that Windows Setup does not work.  What should I do?

  Hello

  Run the tool fixit in the following article and check:

  Diagnose and solve the program installation and uninstallation problems automatically

• Windows Installer does not properly error Code: 641

  HAVE WINDOWS VISTA HOME PREMIUM WINDOWS SETUP DOES NOT CORRECTLY GIVES 641 ERROR WHEN AUTO UPDATE TRIES TO INSTALL IMPORTANT UPDATES.  DON'T ME LETS NOT UNINSTALL A PROGRAM SAYS CAN'T ACCESS THE WINDOWS INSTALL.

  You have installed system mechanic? This is what it seems possible that a recent analysis could have messed up windows installer, so causing problems similar to what you describe.

  I followed the instructions in this thread:

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-windows_update/Windows-Installer-and-error-codes-641-80070641/24fd9f52-7faa-4f80-8f8e-8c7cd80dd481

  Easy to follow, even for an old man like me.

• Files do not automatically load on USB bootable windows 7.

  Original title: Windows 7 usb problem.

  I prepare the USB bootable windows 7 when I pluged in the usb (press any key to continue) do not come and the files load automatically?

  Hello

  Have you changed the boot order to be able to boot from USB?

  • When ready to install Windows 7 from USB key:
    • Connect the USB.
    • Restart the computer and continue to touch the F button (see screenshot below) Manager to open the screen Menu starting for the brand and the model of your motherboard or your computer until it does.
      • 
    • Select the USB stick to boot from.
    • Start the installation of Windows 7.

  And that's how you did your USB key?

  You download the correct ISO file and make your own drive and use the product key located on the COA sticker. Download the correct ISO file and make your own drive and use the product key located on the COA sticker.

  http://www.w7forums.com/threads/official-Windows-7-SP1-ISO-image-downloads.12325/page-2#post-124821

  Using the method of USB in conjunction with the Windows 7 download preceding:

  http://www.SevenForums.com/tutorials/2432-USB-Windows-7-installation-key-drive-create.html

  "How to get and use the Windows 7 USB/DVD Download Tool"

  http://www.SevenForums.com/tutorials/31541-Windows-7-USB-DVD-download-tool.html

  See you soon.

• Service Pack 3 for Windows XP does not recognize that it is connected to the USB ports. I get a notice that something has been plugged, but Windows fails to recognize regardless of the question.

  Service Pack 3 for Windows XP does not recognize that it is connected to the USB ports. I get a notice that something has been plugged, but Windows fails to recognize regardless of the question.

  Disconnect all USB storage.

  Run this tool by do right click and choose 'run as administrator '.

  Of course, all first extract it:

  http://www.Uwe-Sieber.de/files/drivecleanup.zip

  If your XP is 32 bits, use the Win32 folder.

  Reset.

  If you still can't find the drive, assign it a drive letter in disk management.

• Windows 7 does not detect not USB flash drive

  Hi, any help much appreciated on this. Windows 7 does not detect USB flash drives on my laptop. I know that readers of work on other computers and all the USB ports. He does not play sound when plugged in the first time and does not anywhere on my computer. Any ideas? Thanks in advance

  Assuming that you have several disks that work on other computers...

  If you have tried several USB drives on the same port

  AND

  This port does not recognize the USB device plugged in, while the port is not operational.

  IF

  All ports respond in the same way

  THEN

  You don't have either not installed the correct drivers

  OR they did not physically.

• Windows 7 does not recognize that a Canon canoscan 8000F is as a device when it is connected to the USB port.

  Windows 7 does not recognize that a Canon canoscan 8000F is as a device when it is connected to the USB port.  Tried unplugging, reboot & reconnect, in different orders, but the computer does not recognize there is.  Tried to install a European website for Canon driver: Scangear CS, 8000fvst8120a_xpen.exe, which is advertised as compatible with Windows 7.   But the installer does not work.

  Windows 7 Professional 32 bit.

  Hello Graboots,

  Thank you for your message.  You can plug your printer on another computer, in order to exclude the possibility that the problem lies in the printer?  You can try using a different cable, for this rule as well.  Since it is a question of recognition, we remove the external devices before software troubleshooting.  Do you get anything when you plug the printer (ie. a tinkle of connection)?  Please let us know, we are looking forward to hear back on your part.
  See you soon

  Engineer Jason Microsoft Support answers visit our Microsoft answers feedback Forum and let us know what you think.

• Windows 8 does not support the prolific usb to serial driver

  Windows 8 does not support the prolific usb to serial driver
  What is the solution?
  We want to use windows 8, but because of this driver issue, we do not buy windows 8

  Windows 8 does not support the prolific usb to serial driver
  What is the solution?
  We want to use windows 8, but because of this driver issue, we do not buy windows 8

  Understand when the manufacturer of the hardware device will provide you with the drivers for the hardware you want to use on the operating system you want to use.  If they aren't - so there you go.

• Windows VISTA does not start - shows a green bar horizontal scrolling forever, safe mode stops at crcdisk.sys

  Windows Vista does not start.  It shows the horizontal scrolling green bar with microsoft (c) and then goes to a black screen with the mouse arrow that moves. Start in safe mode loads the drivers to the extent of the crcdisk.sys but meet once again at the black screen with the mouse arrow.   Have not the SATA drives connected.  Impossible to get to the command prompt to delete all files.  No work from safe mode.  Restore computer does not work.  I have looked at other posts regarding the renaming/deleting files, but cannot get to the command prompt to resolve this problem.  The computer is less than 2 years.

  Toshiba Satellite A205-S5831, dual processor running.  Running Windows Vista BASIC.  Hard drive seems to work, lighting, well working properly, no error at startup.  No perifpherals or a mouse, or a USB attached.  Disabling USB does not boot.

  Can someone give a help?

  Download the ISO on the link provided and make a record of repair time it starts.

  Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

  At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu.

  When you have changed that, insert the Bootable disk you did in the drive and reboot.

  http://www.bleepingcomputer.com/tutorials/tutorial148.html

  Link above shows what the process looks like and a manual, it load the repair options.

  NeoSmart containing the content of the Windows Vista DVD 'Recovery Centre', as we refer to him. It cannot be used to install or reinstall Windows Vista, and is just a Windows PE interface to recovering your PC. Technically, we could re-create this installation with downloadable media media freely from Microsoft (namely the Microsoft WAIK, several gigabyte download); but it is pretty darn decent of Microsoft to present Windows users who might not be able to create such a thing on their own.

  Read all the info on the website on how to create and use it.

  http://NeoSmart.net/blog/2008/Windows-Vista-recovery-disc-download/

  ISO Burner: http://www.snapfiles.com/get/active-isoburner.html

  It's a very good Vista startup repair disk.

  You can do a system restart tool, system, etc it restore.

  It is NOT a disc of resettlement.

  And the 32-bit is what normally comes on a computer, unless 64-bit.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  How to get Vista recovery Media and/or to use the Vista recovery Partition on your computer.

  There is no Vista free download legal available.

  http://www.CSD.Toshiba.com/cgi-bin/TAIS/support/JSP/home.jsp

  Contact your computer manufacturer and ask them to send a recovery disk/s Vista set.

  Normally, they do this for a cost of $ small.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  In addition, ask them if you have a recovery Partition on your computer/laptop to restore it to factory settings.

  See if a manual provided with the computer or go to the manufacturer's website, email or you can call for information on how to make a recovery.

  Normally, you have to press F10 or F11 at startup to start the recovery process...

  Another way I've seen on some models is press F8 and go to a list of startup options, and launch a recovery of standards of plant with it, by selecting the repair option.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  Or borrow a good Microsoft Vista DVD (not Dell, HP, etc).
  A good Vista DVD contains all versions of Vista.
  The product key determines which version of Vista is installed.

  There are 2 disks of Vista: one for 32-bit operating system, and one for 64-bit operating system.

  If install a cleaning is required with a good DVD of Vista (not HP, Dell recovery disks):

  Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

  At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu

  http://support.Microsoft.com/default.aspx/KB/918884

  MS advice on the conduct of clean install.

  http://www.theeldergeekvista.com/vista_clean_installation.htm

  A tutorial on the use of a clean install

  http://www.winsupersite.com/showcase/winvista_install_03.asp

  Super Guide Windows Vista Installation

  After installation > go to the website of the manufacturer of your computer/notebook > drivers and downloads Section > key in your model number > find the latest Vista drivers for it > download/install the

  See you soon.

  Mick Murphy - Microsoft partner

• HP Pavilion dv6-7028tx Enterta: Windows Setup could not configure windows to run on this hardware

  As I tried to reinstall win 7 on my laptop HP Pavilion dv6-7028tx, the competition, Enterta I received this message by win7 saying that «windows Setup could not configure windows on this computer hardwear»

  

  I did some research on this issue, it seems to be the lack of SATA drivers on my computer.

  Could you please tell me which intel SATA driver should I install to fix the problem?

  If this method does not work, then please can you me how to change the hard drive in AHCI or IDE BIOS setting?

  Thank you very much

  Hello:

  You cannot change the drive controller setting in the BIOS on any HP laptop consumers made in the last 5-6 years.

  See if it works...

  Download the drivers from this link below (first listed file - 64-bit).

  https://Downloadcenter.Intel.com/Detail_Desc.aspx? AGR = Y & ProdId = 2101 & DwnldID = 23060 & keyword = Intel + Rapi...

  Extract (copy) the files on a USB FlashDrive without all records.

  With the flash player and support installation of W7 in the machine, boot from the installation of W7 media.

  After selecting the install now option, select the training - Advanced menu, Options and select the option load a driver.

  You should now see the storage driver files listed.

  If you check the box, it only includes the compatible driver.

  Follow the prompts and I hope, will install W7.