7260 Intel ac radio off

Similar Questions

• Portege R500 - Novatel Wireless Radio off

  Hello

  I've seen a few posts on here suggesting various downloads and updates to solve problems with 3 G connectivity, but none of these downloads have worked for me.

  Novatel loads OK... but reports still no Service - Radio Off... I can't find a way to get "Radio on" or any info on what might be the issue...

  Any help at all would be great!

  Dave L

  Hello

  Are maybe something stupid but you sure that you have an internal 3G module?

  As far as I know not all models are equipped with this feature to check this first, please!

• IdeaPad Z50-70 wireless - hardware radio off

  Hello

  I have a Lenovo IdeaPad Z50-70, and for almost 2 days, I see that my wireless connections are not work / appear. Until about 2 days ago worked well all.

  It is said "hardware radio off", I looked on google but found nothing yet, I tried to 'Reset PROSet' but still, after the reboot, it is the same problem.

  It is not a big problem, because I use an internet cable and everything works fine, but because it's a laptop, so I want to buy a router there is the problem, I can buy it but will not work... like the wireless.

  How can I fix it? How to turn on radio equipment? Is there a button or a key combination?

  Sorry for the late reply, still does not, but I wonder, my F (1, 2, 3... 12) buttons have other functions such as mute F1, F2 F3 adjust sound, F5 Refresh, etc..
  Could this be the problem because the F5 bind key refresh or... I mean, and it should do something else that refresh?

  Update: it's weird, this evening, I came to the College and opened the laptop seems to be that my wireless connections are visible again and work. Still don't know what to do, but I'm glad it is resolved.

  Thanks again for the support!

• 8530w Win7 Home Premium fresh install - Wifi and bluetooth radio off just not online

  Hi all

  I encountered a strange problem. I did a fresh install of Windows 7 Home Premium 32 bit edition. I installed all the essential drivers; setting network, wifi, quick launch button drivers HP and others. Wired network works fine. However, the wifi button is orange and does not work on contact. All other keys work well, so I guess we can exclude. The driver is loaded OK and the hardware is connected according to the Intel Pro Set diagnostic tools. However, he also pointed out that the radio switch is thrown off, so the orange light right?

  The radio is off, bluetooth driver moved not because of 'not present material' and I can't enable it.

  I've seen other people with the same problem, but a majority of those who appear to have been related to the HP power management. And as this is a clean install, I don't think that power management is the problem. Just to be safe, I disabled the power management capability in the adapter properties.

  So, is there another way to activate the radio via the software without relying on the button of the Panel wifi? Are there other ways to diagnose the problem?

  Thanks for your help!

  Best regards

  / Thomas

  Have you installed extensions Intel Proset for Windows 7?

  http://h20566.www2.hp.com/portal/site/hpsc/template.PAGE/public/psi/swdDetails/?sp4ts.oid=3999719&spf_p.tpst=swdMain&spf_p.prp_swdMain=wsrp-navigationalState%3Didx%253D4%257CswItem%253Dob_83281_1%257CswEnvOID%253D4058%257CitemLocale%253D%257CswLang%253D%257Cmode%253D4%257Caction%253DdriverDocument&javax.portlet.begCacheTok=com.vignette.cachetoken&javax.portlet.endCacheTok=com.vignette.cachetoken

  Have you installed the HP Wireless Assistant?

  http://h20566.www2.hp.com/portal/site/hpsc/template.PAGE/public/psi/swdDetails/?sp4ts.oid=3999719&spf_p.tpst=swdMain&spf_p.prp_swdMain=wsrp-navigationalState%3Didx%253D%257CswItem%253Dob_84194_1%257CswEnvOID%253D4058%257CitemLocale%253D%257CswLang%253D%257Cmode%253D%257Caction%253DdriverDocument&javax.portlet.begCacheTok=com.vignette.cachetoken&javax.portlet.endCacheTok=com.vignette.cachetoken

  You can activate wifi via network connections

  

• Portege A600: 3 G radio off and can depend on the use of Win 7 64 bit

  I have a Portege A600 with 3G (Ericsson F3507g).

  The Wireless Manager says the radio is off and I should activate it via the hardware switch.
  The switch is turned on, but only effects the Wifi and Bluetooth. FN + F8 does nothing.

  All the drivers are installed and I also installed RF 3 G utility.
  There is nothing in the BIOS referring to WWAN. I have Windows 7 64 bit installed.

  I saw a suggestion to install the value Pack, but the two zip files will not extract because they suggest that they are part of a multi zip pack.

  > I saw a suggestion to install the value Pack, but the two zip files will not extract because they suggest that they are part of a multi zip pack.

  [Value added Package | http://www.toshiba.eu/innovation/download_driver_details.jsp?service=EU&selCategory = 2 & selFamily = 4 & selSeries = 243 & selProduct = 821 & selSho rtMod = 797 & language = 13 & selOS = all & selType = all & yearup load = & monthupload = & dayupload = & useDate = null & mode = al lMachines & search = & action = search & macId = & country = all & selectedLanguage = 13 & type = all & page = 10 & ID = 73571 & OSI D = 30 & driverLanguage = 42] must be installed to use the function keys and activated the WiFi / 3G.

  After downloading, you can decompress the package. Then, you will find a file .exe inside the new folder.
  This exe file is also a zipped package. You can extract this right click on the exe file and choosing extract here. Then you will find the setup.exe file, which should launch the installation

  But before doing the [pilot 3 G | http://www.toshiba.eu/innovation/download_driver_details.jsp?service=EU&selCategory = 2 & selFamily = 4 & selSeries = 243 & selProduct = 821 & selSho rtMod = 797 & language = 13 & selOS = all & selType = all & yearup load = & monthupload = & dayupload = & useDate = null & mode = al lMachines & search = & action = search & macId = & country = all & selectedLanguage = 13 & type = all & page = 1 & ID = 71930 & DISO =-1 & driverLanguage = 42] and [3 G RF Power Control Utility | http://www.toshiba.eu/innovation/download_driver_details.jsp?service=EU&selCategory = 2 & selFamily = 4 & selSeries =] [243 & selProduct = 821 & selSho rtMod = 797 & language = 13 & selOS = all & selType = all & yearup load = & monthupload = & dayupload = & useDate = null & mode = al lMachines & search = & action = search & macId = & country = all & selectedLanguage = 13 & type = all & page = 1 & ID = 73658 & DISO =-1 & driverLanguage = 42] must be installed.

• 3160 AC 7260 Intel wireless upgrade - missing bluetooth Satellite z30-b-100

  Hello

  I updated the AC wireless intel 3160 to 7260. The wlan and the WiDi work but, but bluetooth has disappeared from the Device Manager of. I tried to install the updated BOF this combo card. I can't install but the bluetotth does not work. Any ideas?
  I have red, this one sulution is by typing the PIN 51 card (it applies to version HMW). But my map is NGW 7260. I don't know what to do with this card, I can't find any PIN diagram.

  Kind regards
  István

  Dear Gladyshof,
  I can't read your post. Something wrong with the characters
  Concerning
  István

• Portege R500 3G "Radio off".

  Hello
  RELOADED Vista and in Mobilink, he says the Radio is off :(
  How can I go around it, because does not know where?
  Thank you

  Have you installed the utility of RF control and the Toshiba value added Package?
  If this isn't the case, you should install it.

• Defining a 1852nd Aironet AP - Radio Off - Cisco IOS 12.3 (4) JA

  I have a brand new Cisco Aironet 1800 AP series I'm trying to install. Specifically the 1852E. I do not have a controller and try to use the method of deployment of mobility Express. When I received the unit there is a yellow label more precisely declaring outside: "OFF BY DEFAULT note RADIOS: radios are disabled by default for Cisco IOS releases 12.3 (4) JA and later.

  If anyone can please tell me how I am supposed to this access point configuration when the radios are not suite, so the CiscoAirProvision SSID is not broadcast?

  I tried the following:

  1 connect the unit to my PoE switch. Unit Gets power and discovery mode starts (red/orange/green light cycling). He succeeded receives an IP address from my DHCP.

  2. when I try to access the device through my laptop via the local LAN it just times out. Pings meet.

  I apologize if my post seems harsh, I am quite agitated that even after having spent more than 5 hours trying to troubleshoot and get this thing to work, there was nothing else than a nightmare (both for the installation of touted 10 min). I do RTFM. I missed something simple jumps? or am I just to assume that Cisco has really missed the boat the patch appropriate for an assignment in their literature.

  FOR INFO. Thorough searches Google and research on this forum gave me no help.

  Thank you.

  Convert a CAWAP AP an AP express mobility

• BlackBerry Smartphones Blackberry Curve Radio "Off", how to turn around?

  OK, I discovered that when I searched this problem, many people have had the same problem: the battery is too low (something I would NEVER let happen after this gene) and the radio is off.

  The problem is, I followed all the directions to go to the icon 'Manage connections' and check the box "Mobile network".  Even when the box is checked and the circle beside it turns green, it is still saying that my radio is disabled.

  Then when I scroll down to "services status" is said that my blackberry internet service is "not connected". How can I fix it?  Help, please! Thank you very much!

  Try resetting the device.

  Follow these steps:

  When the unit is on, remove the battery, wait a minute and rotate the battery on the device.

• T420 hardware Radio OFF - How can I activate?

  As many times as I press FN + F5, radio equipment will not be enabled. Help, please? Is it possible to turn wireless on?

  There is a very small switch on the right side of the computer.

• Smartphones blackBerry "Radio Off" and cannot be turned on via 'manage connections '.

  Hey all, hoping someone has seen this before on the curve.  I ran downstairs to the power and the radio stops automatically, but now, no matter what I do that worked previously, (make a call/go in manage connections-"Turn on all connections") the radio does not turn on.

  Any ideas or advice before I commit to BlackBerrycide?

  Hi and welcome to the forums!

  Try to remove the battery when the phone is turned on,

  Let it down for a minute, then replace, leave the device completely restarts

  1-3 minutes, see if the problem comes back.

  Thank you

• BlackBerry Smartphones Radio off low battery

  Hi guys,.

  The battery on my Storm now ran low and a message came up saying that the radio was shut down because of the battery is too low. I am currently charging my phone and now responsible for 2/3. The problem I have now is that I can't send texts! I can receive and calls are OK, but I can't send texts of the anyone know how I resolve this issue?

  Thank you

  try to remove your battery for 15 sec and then replace them.

• [Help please] Intel AC radio went with the new driver.

  Someone knows how to solve this problem:

  http://oi59.Tinypic.com/dwqcuh.jpg

  PM sent.

  If someone wants to try the drivers that I use (version 17.01.5, dated dated 12/03/2014) feel free to PM me, as well.

• Radio off Bluetooth check

  Is it possible to determine in 4.1 if the connection Bluetooth has been disabled?  I know that you can check if the Bluetooth is supported, but what happens if the user accesses the connections and disables the Bluetooth connection?  Y at - it a class that takes care of this?

  Thanks for the help.

  I've seen a similar thread with a solution to your answer in this forum. Take a look:

  http://supportforums.BlackBerry.com/Rim/Board/message?board.ID=java_dev&message.ID=1806&query.ID=586...

  Kind regards

  yosoh

• Intel ac 7260, radio, win7 64 bit, compaq 15-a026sg

  An operating system is and must be Win7 Ultimate 64 bit sp1
  Computer: Compaq 15-a026sg, i5 - 3230 m.

  I changed the standard map for intel ac 7260 because it was a lot of problems with the old connections to the card (breaks or sometimes 5 Mbps and sometimes 1 kbit/s) and a lot of people with a similar problem with this model.

  I also have Ubuntu and new card wifi (intel AC 7260) works well with this system on this computer.

  With Windows 7, I see my card in 'device manager' (sorry, but I am from Poland and my OS is in German and I don't remember the English names) but I can not not for this light with an F12 key.

  Parameters:
  Gerät, 2 PCI bus 0, function 0.

  Intel (r) Dual Band Wireless-AC 7260
  PCI\VEN_8086 & DEV_08B1 & SUBSYS_40708086 & REV_BB
  PCI\VEN_8086 & DEV_08B1 & SUBSYS_40708086
  PCI\VEN_8086 & DEV_08B1 & CC_028000
  PCI\VEN_8086 & DEV_08B1 & CC_0280

  It's this map: http://www.amazon.de/dp/B00E7QGHE6/ref=pe_386171_51767411_TE_M3T1_dp_1

  Which driver should I use and what I need to do step by step, please?

  Ok. Now, I have a solution: https://www.youtube.com/watch?v=yzAKcmlaH1M

  Covering 20 PINS with a Ribbon according to the film and a LED in the f12 is still orange, but the card now works under Windows 7 64-bit. I didn't try it with this card, but by another at work (Intel ultimate-n 6300) and is OK.

  http://h30434.www3.HP.com/T5/wireless-Internet-home-networking/Intel-ultimate-n-6300-radio-off-Win7-64bit-Compaq-15-a026sg/m-p/4715378/
  This means that in the BIOS there is a whitelist and it is a problem only on Windows and not on GNU/Linux:-D.