Impossible to have a brand new window "Auto-agrandie".

Similar Questions

• How can I change to use a wep, tells me is not secure personal wpa running? I have a brand new d link 2680 router & used windows xp 3?

  How can I change to use a wep, tells me is not secure personal wpa running? I have a brand new d link 2680 router & used windows xp 3?

  Wireless security is controlled by the router.

  Download the manual of your router on the following link:
      <>FTP://FTP.Dlink.co.UK/diagrams/Misc/DSL-2680_A1_Manual_EU_1.0.PDF >

  To change to the WPA instructions are on page 39.

  After that, you may need to remove all references to your router on your devices without wire, then re-establisg the connection.   Alternatively, you can change your Secure ID (SSID) as you make changes to the configuration of your router and then reconnect the new SSID for all devices.

  HTH,
  JW

• I have a brand new deskjet 3520

  I have a brand new deskjet 3520 I bought yesterday and ink installation cartridges do not work. I just unpacked it the printer and everything was fine until the cartridges. Its not even give an error message, it's just stuck on the screen "Please use the cartridges supplied with the printer CONFIGURATION. What should I do to fix this?

  I'd start by checking to make sure that all packing material is removed from the product.  Here is a document for you printer that takes into account the mistakes of the print cartridge. If you reach the end of this document and still have the error message I would contact HP Total Care. They can solve the problem and have the opportunity to get new cartridges of configuration you if she is seen as the root of the problem.  The number of AMERICAN customers is 800-474-6836.

• Brand new Windows 7 system: battery plugged in, not supported

  I just got a brand new Acer Aspire 5542-1462 with Windows 7 Home Premium pre-installed. I have almost exclusively while plugged operated. Battery in the notification area icon indicates that the battery is at "97% (plugged in, does not support)." How can I get the battery charge? Is there a threshold above which it does not load? Some features of the system if they will help you:

  AMD Athlon II X 2 M300 2.0 GHz
  4 GB OF RAM
  ATI Radeon HD 4200 graphics card
  battery Li-ion 6 cells

  My power profile is balanced with the only change so that everything always remains that plugged while. This is my first Windows 7 machine after years with XP, so I am new to the operating system. I searched around the internet and here and can't find anything.

  Hey,.

  This is how it works:

  1. When you turn on your laptop, if your battery is more than 95%. you will get the message "connected but no charging current.

  2. When you turn on your laptop, if your battery is less than 95%, you will see the message "blocked and charge" until the battery reaches 100% (not 95%). That is why sometimes, even if you see that your battery is at 97% and load, this means before starting your laptop, the battery was less than 95% and reached 97% since then.

  Apart from the above explanation it seems some problems with the mentioned error. So, try the following steps as well.

  1. click on Start and type device in the search for field, and then select Device Manager .
  2 expand the category of batteries .
  3. under the batteries category, right-click in the list of Microsoft ACPI compatible with battery control method and choose Uninstall .
  WARNING : do not remove the Microsoft AC adapter driver or any other compatible ACPI driver.
  4. on the taskbar of the Device Manager, click on Search the hardware changes .
  You can also select Action > search the hardware changes .

  Give that a try!

  $C God will not look you over for medals, but for scars. Each winner has scars; I do this either on the same heart

• Hi I have a brand new HP pavilion dm1 and I get a blue screen: BUGCODE_USB_DRIVER

  Since I started using my new laptop I randomly get a blue screen that says: BUGCODE_USB_DRIVER. The other info I got is the following:

  • OS version: 6.1.7601.0.1.0.768.3
  • Locale ID: 5130
  • Collection BC: fe
  • BCP1: 0000000000000008
  • BCP2: 0000000000000006
  • BCP3: 0000000000000006
  • BCP4: FFFFFA8004860000
  • Service Pack: 1_0
  • Product: 768_1

  I am using Windows 7 64 bit
  I don't know what to do. The only suggestion I got it that allow the system to restore everything as it was by the manufacturer. And I did it, but the problem has not been fixed.
  Can you help me please?

  If it is a brand new computer, you should immediately bring her back to your place of purchase or contact HP for repair or replacement.

• brand new windows 7 Home premium backup problem

  Hello

  I bought the new HP pavilion DM3 [external dvd player] with the new windows 7 Home premium intalled about 4 weeks ago. After the first round and all updates installed, real I tried windows backup on dvd - r media.

  I started windows backup, after whereas it wonder average wiriteable so I put the dvd - r inside, next step was to format dvd - r [little unusual, but I have no choice]... After succesfull formatting it starts to burn. After a few hours, he was still burning mode 54% without errors and progress too. I pull out the cable of the external dvd burner, the writing process has failed and on dvd was written about 1 cm of layer thickness.

  I tried 2 times again with the same result, but the different progress of burning 56% and 25%

  What should I do?

  Best regards...

  Hello D.A.E.Z.,

  Please check the site for problems with CD/DVD problems.
  http://support.Microsoft.com/mats/cd_dvd_drive_problems/en-us

  There is an automatic FIXIT who might help with your problem.

  Sincerely,

  Marilyn
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think

• I have a brand new installation of 13 PS elements. How I have difficulty drag and drop doesn't work is not on my system Windows 7 Pro 64-bit?

  I just installed PS 13 items on my system Windows 7 Pro 64-bit. Mouse clicking works, but how I have difficulty drag and drop works do not? For example, I can't create a selection rectangle or drag the sliders or move the panels of the tool or resize a text box, I tried as an administrator (it does not help). Same "ClickLock" in Windows does not drag. No other program on my machine has problems. Help!

  Reset preferences did not set anything. Even reinstall 13 elements PS has not fixed anything.

  However, late breaking new...

  See other discussions on this topic, which suggests a conflict of startup program that might be the cause, I did some experiments.

  All the functions of the mouse to 13 PS elements worked well if I started my Windows 7 in "safe" mode
  So, back in 'normal' mode, I manually disabled all startup programs. Returned mouse problem.
  Enter the control panel "services", I disabled 'Synergy' (a program that allows me to share my keyboard and mouse between two computers). Fixed a problem.
  The reactivation of all the startup programs while leaving a synergy service is turned off, everything works still fine.
  Start all programs present and re-empowerment synergy, but turned off its 'high privilege check box. Everything is still fine.

  Conclusion: Synergy in high privilege mode service was the only culprit.
  Synergy in non high mode allows my PS 13 items and keyboard/mouse sharing to coexist.

  The strange thing is that only PS elements 13 was affected by synergy. I detect no problems anywhere else. But it doesn't matter; the new arrangement (no high synergy) works fine for everything.

  Al

• I bought the game, family and have installed the new Windows 7, but by the second match, it freezes, and windows says there was a problem and needs to close the game / and or window.problems? __

  I'm having a problem with my new game, family feud.  someone can help me?   How can I solve this problem? and I'm not bad with puters... sorta self-taught.   need help it's step by step in order to follow and apply them correctly.

  • Error messages
  • Recent changes to your computer
  • What you have already tried to solve the problem

  Hi Newgirl11,

  Welcome to the Microsoft Answers site!

  We don't have much information about the compatibility of the game with Windows 7, you can see the link below.

  http://www.Microsoft.com/Windows/compatibility/Windows-7/enus/search.aspx?type=software&s=family%20feud

  To work around the problem, you can try to install the game in compatibility mode and check if it works very well.

  To run the troubleshooting program compatibility Troubleshooter

  1. Open the program compatibility problems by clicking on the Start button, then Control Panel. In the search box, type troubleshooting, and then click Troubleshooting. Under programs, click on run programs for previous versions of Windows.
  2. Follow the instructions contained in the resolution of the problems.

  If you are unable to install a program, insert the installation disc for the program and, using the Troubleshoot utility, navigate to the program setup file, usually called Setup.exe, Install.exe, or something similar. This utility is not designed to work on programs that have an .msi file name extension.

   

  For more details follow the link below.

  Make older programs in this version of Windows

  Hope this information is useful.

  Amrita M

  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Brand new Windows XP Professional SP3 key does not

  I fell right on my old CD-ROM Windows XP Professional SP1 and my new key SP3. I installed XP on my old Compaq ProSignia 165 to make it work again, and when it prompted me to insert the key, I tried my SP3 key. It didn't work as I thought, so I used the key out of my Dell OptiPlex 170 L to install because I still use it a lot. Then I threw SP3 on it and downloaded the Microsoft program change key and tried. It does not accept it, nor any of my other XP Pro key. Everything except my netbook works Pro, so what is happening here? I have to do in the registry or what? I'm starting to get fact TIC TACS in this thing, because it does not appear WHAT I put on it. Please help me, because I'm starting to lose here.

  Try the Activate by phone:

  How to activate Windows XP
  http://support.Microsoft.com/kb/307890/en-us

  If the activation of the Internet does not work, then see the section titled: "how to activate Windows XP by phone.
  Also, make sure that you do not confuse the product key numbers and letters
  (number 8 can be confused with the letter B, etc.).

  ===================================================================

  Blank page to activate Windows in the wizard of Windows Product Activation
  http://support.Microsoft.com/kb/314935

  How to contact a Microsoft Product Activation Center:
  http://support.Microsoft.com/default.aspx/KB/950929/en=us

  Microsoft Activation centers worldwide telephone numbers:
  http://www.Microsoft.com/licensing/existing-customers/activation-centers.aspx
  (This site is for activating Volume License, but if you call, they will help you)

  The phone number is not working:
  Microsoft Wordwide contacts: http://www.microsoft.com/worldwide/default.aspx

  Once Windows activated / Genuine Advantage Notifications:
  http://www.Microsoft.com/downloads/en/details.aspx?displaylang=en&FamilyID=afd45b36-3d77-4259-801c-d31a9a90cdcf
  (This tool will confirm that the copy of Windows installed on your PC is genuine and authorized)

  J W Stuart: http://www.pagestart.com

• I have a brand new installation of cs4.01 still a a computer brand new and it used open

  I just bought a new computer and I install cs4 on this I did installation installed updates, version 4.01, the computer is an alienware 17 running windows 7ultimate he hasProcessor & memory: Intel® Core™ i7-4930MQ processor 3.0 GHz 32 GB Dual Channel DDR3L at 1600 MHz RAM drives: 1 TB Quad Play RAID0 (3 x 256 GB SSD RAID0) + 256 GB (mSATA with partition TSRI) No. Optical Drive internal operating system : Microsoft® Windows 7 ultimate (64 bit) graphics & video: 17.3 "WLED FHD (1920 x 1080) anti-Glare Display Dual-Band, 4352 Broadcom Wireless-AC + Bluetooth 4.0 Communications: 8 GB NVIDIA® GeForce® GTX 880 M graphics Adobe Encore freezes before it opens or locks opening and unresponsive I can do. Thank you.

  Do run as Administrator http://forums.adobe.com/thread/969395 [said again and also to 'All' first versions] will sometimes fix errors "bizarre."

  Video problems Dual - you have two graphics cards?

  Go to the Windows Control Panel and select hardware and sound, and then select Device Manager... In Device Manager, you click on the sign to the left of graphics cards... + and see if the 2 are listed

  IF SO, read below

  -http://helpx.adobe.com/premiere-pro/kb/error---preludevideo-play-modules.html

  -http://forums.adobe.com/thread/1001579

  -Use the BIOS http://forums.adobe.com/thread/1019004?tstart=0

  -Why link http://forums.adobe.com/message/4685328

  -http://www.anandtech.com/show/4839/mobile-gpu-faceoff-amd-dynamic-switchable-graphics-vs-n vidia-optimus-technology/2

• I have a brand new MacBook as a gift, but it's evil!

  just got a new Macbook as a gift for my birthday, but I got the wrong :/ I tried the MacBook Pro 13 ", which is essentially the same price as the one I just got (Silver 12 '' MacBook) I was wondering if I could go to the Apple Store and see if I can trade for the right one. I have the receipt and that you did not open the box or anything. Not quite sure what return policy Apple's since I did not buy, and it was a gift. Help!

  Perhaps. The return policy is 14 days. If it has not been opened, you can trade even after this, however. We are customers and users like you. We cannot talk about Apple. Take it in the store with the receipt (assuming that it was purchased from Apple) and see what they say. If it was purchased from another retailer, you should consider the retailer it was purchased from. Apple may not trade at all if you bought elsewhere, open or not.

• have a brand new photosmart d110 printer/copier/scanner. My Mobile Spartan has xp.won't work :(

  need to know if there is something I can do for my Mobile Spartan w / Windows XP compatible with my HP photosmart D110 printer/copier/scanner. People have told me that I can download a driver to make it compatible with Windows XP by downloading a driver. Others have said that my computer does not have the ability to be compatible because the printer needs Vista to work. I am really confused about this. I am not very computer but I get. If anyone can help me I would really appreciate it. Thank you

  Hello

  Wep passphrase is the security of your wireless network, so I can't tell you what it is. However check bottum of your router/modem, most of the time people do not know their code they use standard code that is supplied with the router, and the code is on the bottum router ussualt.

• Brand new OfficeJet 7000 drivers will not install for the brand new Windows 7 Ultimate 64 bit PC

  Hello

  I downloaded the versions Basic, both full of drivers for printer OfficeJet 7000.  Move cleanly - error code 2203.  When talking about this issue with the Support technical they tried several different things, but nothing has worked.  I have a service ticket number - 80356333671

  After turning off the phone (more than 90 minutes) - I searched on google and all the hits that were displayed were the same steps I saw technician employment, made you ask - is google, the new standard Tech support?

  Currently, I own a nice weight and pretty paper.  Anyone can help - I'd appreciate it.

  With the help of technical support, I ran the "Officejet software and driver Removal Utility" for my particular model (available on HP website - driver download page) and then ran the installation of the driver and it worked perfectly.  Why? I do not know.

• several USB incompatibility! brand new windows 7 64 GB.

  I have a san disk 8 GB that actually works, but the other disk three san 8 GB that I won't.

  I have a 1 TB external hard drive that works however the other external HARD disk I have tried will not work...

  What a waste of my time and money, afraid to buy USB incase they won't work!

  When will it be sorted microsoft?

  This diagnosis you have done to date?

  Please provide details about your current problem.

  We are better able to help you if you help by providing us with as much information as possible...

  Suggestions for asking for help on a site.

  http://support.Microsoft.com/kb/555375

  http://www.CatB.org/~ESR/FAQs/smart-questions.html

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_other-windows_update/what-information-to-post-in-the-Windows-Update/1467f44b-ee27-4F7D-98d7-f1c4b35b3395

• Why is my LAN is disabled after you have reinstalled the new windows 7 on laptop

  I downloaded on my computer to the wireless network drivers, and still does not have my WiFi on laptop?

  I have HP Pavilion 1047ej g6

  It is wireless to all help me pls

  I downloaded Hp Wireless Assistant, and my program says that my LAN is disabled in Device Manager

  where should I go to activate the LAN?

  NVM, I fixed it: D ty for the help anyway ^^

  I downloaded a network driver and I forgot to update xD so now I have an internet connection:DDDDDDDDDDD