7280 fax wireless fax

Similar Questions

• C7280 - cannot print JPEG files - but can print docs

  Fortunately the C7280 will print documents, but if I try to print a jpeg file - nothing happens or rather...

  (a) jpeg opens in windows photo gallery

  (b) press on print

  (c) ensure that only good printer is selected as opposed to 7280 fax

  Then she sits down on a message "Please wait while the printer sends information about Windows' which takes a seriously long time – 10 minutes or in some cases just can't."  :-(

  Dell Windows Vista Business + C7280 - connected wireless PC.  JPEGs are about 2 mb in size.

  Would like some advice if someone - had to leave for a location without two JPEGs Friday because I could simply not the printer to print.  The only way I can get them now is insert into a word doc' happens instantly.

  Oops... try again:

  Solution:

  1. go in Control Panel

  2. Select Printers

  3. Select Add printer in the top bar

  4. Select the "local" option

  5. Select Deskjet 990c of the menu drop down and a default and add this.

  When you go then to print, select 990c rather than 7280 (in my case) and it works!  :-)  I hope this helps.

• OfficeJet 6480 problem w fax setup, will not pass through wireless phone

  OfficeJet 6480.

  I took 20 minutes on the phone to find someone to get me to tell them what the problem is.

  the first speaker gave me a ticket #8018531464

  and passed me on the real tech support (I think).

  Finally, I asked if I could please tell him what my problem.

  He said yes and asked if f I have the black cord that comes with it.

  I said 'yes' and he pulled the plug (1 line) on the 6480.

  He hung up on me!

  hahaha, nope, the wwas cord connecting the cable-modem (TimeWarner) jack to the panasonic cordless phone.

  in any case, I wasn't going to go through the introduction of 20 min. again, only to find out if he could answer the question.

  So here it is.

  When I connect the black cable supplied with (for a single line I think) telephone jack of the cable modem (they provide my dgital phone, internet and Cable only ESA, no data dedicated line because I have to go through a flurry of faxes from time to time at home.)

  then the decision-making ext 2 'lines' on the 6480, another cord goes to the single input based on the receiver of the wireless phone.

  This is the problem, no tone came thru.

  so, in this loop, I inserted the small adapter, single-jac + cord short. the output of the 6480.

  and plugges regular there cord to the cradle of the wireless.

  I had a tone. It seemed to work so far. So I went to bed, feeling successful, to continue to ensure that I had

  useful with my 6480 fax equipment.

  However the next day it did not get a dial tone on the phone.

  I tried different combinations and then abandoned once more imn frustration.

  I tried to get this thing to work for a few months now.

  Once I had the parts of the loop of any kitchen. someone should sent the fax and the 6480 a o ring...

  ringtone and ringtone.

  He hgave been other variants of this scenario which have brought to the point of frustration, I said why bother, I'll do it at work.

  and not being able to devote a lot of time and energy with this easy start home.

  now since I've been laid off, I shortly and more neceessitty to fix this problem.

  I think that the signal gets to the 6480, because I run the test and all passses. There is no test for what I am referrring to and none combined on the 6480.

  I went into the details for several reasons,

  I can omit something: oh, Yes, the router is a lynksys router.

  There is a nearby office using the wireless router and a laptop computer in the other room.

  plus, you get a little history, to learn something on me, as you go through the same routine that I do with technical support. HP is not the only culprit of this approach non-customer ceneterd. But even that does not make this right.

  I suggest, if some listen to those interested. This customer centered woould be to first know of me what is my problem, while you may, or may not, to solve. Then, you can collect the serial number, etc..

  In addition, since you ask the serial number, I would like, as a customer, with that number clearly presented in a convenient place, say in my opinion as I llook at the machine.

  Yes, I know, its probably on the back, probably there insert n close the caps. no doubt.

  but I have to do a flshlight, reading glasses and get the machine our of the arrangement.a clever, bulky, puzzle - like real aesthetic. It's b

  I hope to hear from anyone. Thank you.

  Here is the document on the implementation for different kinds of digital lines (think VOIP is not listed) that could work however, the fax modules used in probably all HP AIO are for analogue telephone lines only (the kind of Ma Bell telephone lines that have nothing to do with computers).  So, you could be just out of luck unless you want to pay for another standard analog line in your home for the fax.  Sorry to be the bearer of bad news, but makes no sense you need to beat your head in frustration on something that is not likely to ever work.  Oh and another thing - make absolutely sure that the telephone line is connected to the fax to send/receive is the one supplied with the printer, they are not your average phone cords that come with phones or you can pick up at the local super store.

• Possible FAX Configuration printer wireless HP7520 using Cordless home phone

  Have a HP 7520 want to configure FAX.

  Home phone is now wireless, any possible connection cable.

  This can be accomplished?

  HP looking and the Web for an answer. Thank you.

  Hi there @MN4help , welcome to the forums!

  You would need to connect to a physical fax line to implement the capabilities of fax on your Photosmart 7520.

  Check out this guide for the ride on how to configure the fax: implementation of the device HP all-in-one to send and receive faxes

  I hope this helps you!

  Happy Monday

• OfficeJet Pro 8600 N911A: fax wireless

  I need to be able to SEND faxes.  Is it possible to configure my Fax on my Wireless HP Officejet Pro 8600 model N911A?

  Welcome to the community of HP @BARBEO,

  I understand that you are looking to set up your HP Officejet Pro 8600 fax functionality. I'll be happy to help you.

  It is possible to configure your HP Officejet Pro 8600 to fax, however, fax can be used through your wireless network, so the printer will be connected with a telephone cord. Below, I've posted a link to a document that has some instructions on how to configure the functionality of your HP Officejet Pro 8600 fax. Please try all the steps in order and get back to me with the results.

  HP Officejet Pro 251dw, 276dw, and printers of the 8600 series - set up the all-in-one to send and receive faxes

  If it helps, will testify of my answer by pressing the 'thumbs up' below, or click on the button "Accept as Solution" if I helped you reach a solution.

  I hope this helps and have a nice day.

• Windows Fax and Scan cannot detect Photosmart C4580 all-in-1 scanner connected to the wireless network

  I have no problem printing or scanning when I connect my C4500 to PC via USB.  When connected via my home wireless router I can print OK but can not scan - it's the same for other users and computers.  Windows Fax and Scan gives me the message 'no scanner found. '  I need to work so that all users on my netwrok home can share the scanner.  I use Windows 7 64-bit.

  Thanks Travis_C (HP).  I actually found the solution just before receiving your answer!  I discovered that, although the Solution Center says it would uninstall the existing files before allowing me to reinstall with the latest version downloaded, it didn't remove all the files.  I only discovered this because the new facility has not taken me through the whole fresh installation procedure, he simply asked me what additional features I wanted to install and asked me if I wanted a local printer or network etc.

  I thought that there must be a mistake or problem with whatever existing files were left and the new facility would not correct it.  So I used the control panel to uninstall the existing files, and I made sure that everything was gone.  I then used the last download to reinstall, this time through the new correct installation procedure, and everything now works perfectly.

  With this method I always had a problem on another PC, giving me the same problem I had before.  I realized that this was due to a USB dongle connected to the PC to a wireless keyboard that seems to affect the installation.  When I removed the dongle installation worked again perfectly, and I now have full printing and scanning ability on all PCs.

  I think the installer for this printer wireless (and perhaps others?) should be updated to solve the problem, and also the center of Solution must be fixed to ensure that if you uninstall the software it should not leave anything.

• 4500:4500 printer can work for faxes wireless

  My 4500 printer is set up the fax function calls to a wall outlet for a local network without wire-line - I don't have a wall outlet

  all my phones have WiFi in the House - 4500 fax can be defined in wireless or not.

  I have checked the web and have not found an answer - all I need to know if the fax works wirless

  N °

  The fax must be connected to an active telephone line with a work phone cable.

  See the instructions below to connect the fax:

  http://support.HP.com/us-en/product/HP-OfficeJet-4500-all-in-one-printer-series---G5/3919445/model/3919446/document/c01968837/

• Faxing from Mac via Officejet 6500 E710n-z wireless

  Mac running 10.9.4 in wireless network Officejet 6500 E710n-z which is plugged into the phone line.

  Print and scan work wirelessly from the computer as expected.

  Manual 6500 Fax works as expected.

  Attempt to fax from the computer said that parts of the software are missing. Computer trying to find updated drivers updated and fails. Software update is any update available. HP.com said that updates are now obtained from software update.

  Installation procedure on hp.com is for printer only. Mac does not see the printer fax and accordingly will not fax.

  I want the printer fax directly from my Mac as it did during the original installation on OS 10.8.x

  Thanks for any help.

  Hi ErichWetzel.

  Welcome to the HP Forums.

  I see that you have a problem with faxing from your Mac.

  I suggest that you firstreset the printing systemon Mac, and once you have finished download and install theprinter HP v.2.16.1 for OS X drivers.

  The following steps should solve the problem.  If you have additional questions, feel free to write me again.

  See you soon,.

• Cannot receive faxes officejet 6500 wireless

  Hello

  I suddenly have problems to receive faxes. Alone was able to cross over early today, and as I understand it, it took 8 minutes to my fax machine to connect. I get error reports saying type is "received" and result in "error 244 *.» I tried instructions support on the HP site, and those who, unfortunately, were not very useful. One thing, I thought may be useful was turning power switch on the ECM - however, it is not all the instructions to do it on my model!

  I have the HP Officejet 6500 Wireless

  model E709n

  Running Mac OS 10.7.4

  My Fax is on a separate phone line: it's a VOIP line I've had for quite some time

  Any help is greatly appreciated! Thank you!

  Take a look at the link below, you will find a resolution hopefully:

  http://support.HP.com/us-en/document/c01661987

  Let me know if you need additional assistance. I'm here to help. Thank you!

• HP 5610: HP 5610 fax wireless

  When I signed up for ATT Uverse, wireless connections are OK for TV, telephone and Internet.  I just noticed I can't FAX with HP 5610 all-in-one. HP 5610 printer can send FAXES wireless or do I need an adapter?

  It does not have wireless Telec. You must connect an analog telephone line to the Jack on the back.

• Faxing via wireless HP OfficeJet Pro Premium 8600 - Win 7 64B

  I'm trying to fax directly from my computer using my P 8600 installed via Wireless.  Printing works fine, faxing from the itsewlf of the printer works fine, just trying to go green.  The driver shows Fax - HP OfficeJet 8600 network, Sami that the printer is configured, but I get the Sendfax error - cannot communicate with printer when faxing. What I'm missing here.

  Hi Brian-DS,

  When you did uninstall it and reinstall, did you use a download from hp.com for the re - install?  Otherwise, you could try doing a complete uninstall and then use a download from hp.com for installing the driver.  Click here

  If this does not help, I recommend you contact HP to Contact HP worldwidesupport.  They should be able to help understand you what is happening.  It would be good if the agent is able to your computer remotely and all check.

  Let me know what happens.

• Photosmart Premium Fax c309 Series all in one printer Wireless Radio does not work

  Some time before, the radio on my Photosmart Premium Fax c309 series wireless all in one printer stops working.

  With a wireless network test:

  Wireless is on (but light indication only is not lit)

  wireless network card has failed

  "The wireless radio does not work.  Contact Hp support.

  Any help would be greatly appreciated!

  Thank you

  Smithb2

  Hi smithb2, welcome to the forums there.

  I saw your post on the wireless radio does not not on your model Photosmart C309.

  I did some research and came across this post in the community that seemed to have worked for others with the same problem.

  Re: Without the printer wireless radio does not

  I hope that helps!

  If troubleshooting doesn't help not solve your problem, then I would say call the HP Technical Support to see all the other possibilities for you. If you call in North America, the number is 1-800-474-6836 and for all other regions: click here.

  Have a great Thursday

• Printer all-in-one HP 6700: fax printer HP6700 can be used on a home wireless phone?

  Can I set up the function of my printer fax all-in-one HP6700 to work on my phone wireless at home?  And if so, how?  I have AT & T phone wireless home service so it is is no longer seen as a land line and taken them murals are not active.

  Hello

  You need an analog line for your printer. Please try eFax:

  http://www2.eFax.com.au/?referral=eFax.com&vid=5

  You should not have your printer at all.

  Kind regards.

• Fax HP Officejet 4500 Wireless will not send fax

  I am able to run the fax configuration and get a result that has passed the test of fax. This test succeeded even with no connection to my phone line. It made me look like a phone line was not necessary, but the answer to another problem related to the fax on a wireless unit posted on this forum very claims all-in-one wireless on doesn't have a phone line.

  At various times I could go to the HP Solution Center and select send a fax and received indications that the machine was trying to do (according to a status window which appeared). I have enen hear fax tones. But in the end, an error message appears.

  Earlier when I go to the center of Solution and select fax nothing happens. The front status screen reads Original charge.

  I tried to use the front panel for iniitiate a fax test fax HP (hp 1 888 faxne) line which tells me a fax sent me with a result no answer. However, the page intended for use as a test page has not been analyzed and transaction report tells me the Fax Send report is set to Off.

  I'll see if I can learn how to change this setting in the setup of the fax machine. I have to deal with multiple problems.

  Hi writchey88,

  I would like to help.  For your printer 'Wireless' means you can send print jobs to the printer wireless.  You will always need a telephone cable connecting the printer to a socket in order to send a fax.  You will not have a problem of fax.  Knowledge is to connect a 2-wire telephone cord to the line 1 of the printer and the other end into a telephone jack.  Run a test fax and if everything goes, try to send a test fax.

  A.m. to run a test fax, press the button 'key', then arrow to the right until you get to Tools, press OK, right arrow until you see Run the Test Fax and press OK.  Click here for more information on the Fax test report.   Let me know how it goes and we can solve the problems from there if necessary.

  Good luck!

• just installed wireless com-cast, printer works well, but now I can not fax.

  just installed wireless com-cast, printer works well, but now I can not fax. When I do a fax of the SEZ of reading test, "no phone" I tried the direct link 'wall of fax' (or printer) I lose my phone connection?

  Tuesday, October 9, 2012 17:30:39 + 0000, Dimas_888 wrote:

  just installed wireless com-cast, printer works well, but now I can not fax. When I do a fax of the SEZ of reading test, "no phone" I tried the direct link 'wall of fax' (or printer) I lose my phone connection?

  You must connect to the terrestrial telephone line - outlet. But
  You can buy cheaply something that fits into the wall
  taking current and made the two simple output Sockets.

  Ken Blake, Microsoft MVP