7680 all in question a clear Fax log.

Similar Questions

• is there a way to clear the fax log?

  Is there a way to delete / remove the fax log?

  Hello

  To my previous quote the second method must have erased the log of faxes do not know why it does not clear.
  Try following these steps to reset.

  Reset partial:

  1. make sure that the unit is ON. Now, unplug the power cable from the device.

  2. press and hold # and 3 while plugging in the power cord

  3 release the buttons when the product control panel indicates "partial Zero".

  Sometimes the printer turns off by itself, you can release the button and use the power button

  Turn the DEVICE, it now reads "Partial reset" and follow the instructions to set up

  Note: To perform this reset the power cable must be unplugged and plugged it back as needed.

  Reset of semi-complete

  1. turn on the printer and then unplug the power cable from the device.

  2. press and hold # and 6 while plugging in the power cord

  3 release the buttons when the product control panel indicates "semi-Full reset". The product is now reset.
  Sometimes the printer turns off by itself, you can release the button and use the power button

  turn ON the device, it now reads "semi-Full reset" and follow the instructions to configure.

  Note: This step erases some of the setting that you have saved are the following:

  -All default menu settings

  -All default phone setting values
  -Learn some country and language of the user interface
  -Clear fax memory
  -Clear fax log information
  -Clear all the speed dials/mailing lists
  -Personal clear header information

  If my post has solved your problem, please mark as, as accepted Solution

  +++ Say thank you by clicking on the star of congratulations in the post.

  Although I am an employee of HP, I speak for myself and not for HP.

• All-in-one Officejet 5610 will not appear fax log

  Just downloaded updated software/driver for Windows 7 64-bit because of this message when you try to view the log of faxes: "C:\Program Files (x 86) \HP\Digital Imaging\bin\hpqmfc11.dll is not designed to run on Windows or it contains an error. Try to install the program by using the original installation media or contact your system administrator or support software provider. ' Error message box is labeled hposfx08.exe - bad Image. Computer will not read the original CD that was installed on the Windows XP computer. Update has not fixed the problem. What should I do? I can't tell whether or not a Fax has been sent.

  Hello, LCSB.

  You can print the scan log from the printer it self.

  Press SETUP > print report > Fax Log.

  If you want to print the Confiramtion then try steps below...

  Press SETUP > print report > Fax of Confirmation : send and receive

  Press SETUP > print report > Fax error report : send and receive

  Kind regards

  Jabzi,

  Help the community by marking this post as a Solution , if it has solved your problem!

  If my post helped you somehow, please click the Blue Star of KUDOS in my name!

  Although I work for HP my messages and responses are mine.

• Security event log getting the message "local computer maybe not the files of the necessary registry information or message DLL to display messages from a remote computer" for all entries. System and application logs do not receive messages

  PC is Windows XP.  The server is Windows 2000.  I have administrative rights on both machines.

  On getting PC security event log do message "local computer, maybe not the files of the necessary registry information or message DLL to display messages from a remote computer" for all entries.  System and application logs do not receive messages

  Hi carmol,.

  Your question of Windows is more complex than what is generally answered in the Microsoft Answers forums. It is better suited to the audience on TechNet forum.

  Please post your question in the Sub forum. Link: http://social.technet.microsoft.com/Forums/en-us/winserverManagement/threads

  With regard to:

  Samhrutha G S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Clear the logs of life cycle

  Hi all

  first sorry for my bad English.

  We have so few r720s Dell. We add a few new components for them and we are ready to give to our customers.
  But before that, we want to clear the logs of life cycle for all old newspapers that are there. I already try: [alertlog, cmdlog, esmlog] = clear command omconfig system and also to reset the idrac. While noting helps.
  Anyone know how I can get rid of them?

  Thank you

  Mitko

  
  

• Event Viewer Windows 7 'Administrative events' can not clear the log? Why and is there a solution?

  Window 7 has many error logs in the "Event Viewer", but all seem to have the ability to "Clear log" except the Administration? Why? I looked at some of the entries, and they you are referencing my "security cameras" this automatic restart after a power/Brown power. Yet I have not found a way to "clear a log this ' under 'Administrative events?' Is there a way to clean this newspaper? It's more than 1100 events, and none are major.

  Thank you

  Hank

  Hank

  Delete all log files, including the journal of the administrator combined, by running this command as an administrator file save it to the desktop and right click to run it. The link is here http://www.sevenforums.com/tutorials/25480-event-viewer-one-click-clear.html?ltr=E

• No there is no way to override the lock 8 hours AFTER you have changed all your questions?

  No there is no way to override the lock 8 hours AFTER you have changed all your questions?

  < object edited by host >

  use the contact for Apple at the bottom of this page and ask them if it is a question about the security of your account.

• How can I get the exact time and date on my FAX LOG

  I have a new HP Officejet 6500 has more on my Dell Inspiron Windows XP computer.  How can I get the exact time and date on my FAX log?

  Hi FrederickFrank7,

  Journal of faxes would just follow the time of your printer. Please set the time and date of your printer.

  I am an employee of HP.
  Please indicate the position that solved your problem as "acceptable Solution".

• BlackBerry smartphones, I can't clear the log of events completely! Bold 9900

  I don't know why, but I just can't clear the log of events completely. I always stayed with two newspapers which cannot be erased. The two newspapers said: error and mistake. It's only affect the phone, but it's pretty disturbing with two newspapers cannot clear. I had tried to pull battery, resets and it can always be removed. Help, please.! My phone is the Bold 9900. Carrier is Singtel. Operating system to 7.1.0. HELP PLEASE! Thank you!

  Nope.

• How to clear the log of events on my hp m1217nfw?

  Hello world!

  Is there a solution to clear the log of events on my hp m1217nfw printer? I do not know how...

  Thanks in advance

  CYANOACRYLATE GLUE

  Hi CYANO.

  Your very welcome.

  Please consider this message Message 2 of 3 marking as "Accept as Solution" so that someone else in the community of HP who can meet the same or similar problem will know what to do.

  Thank you.

• the fax log is not up-to-date.

  I have a HP Officejet 4500 Desktop which I am running with a Windows XP system.  The fax log is not up-to-date.  How can I get the software to update the journal?  Everything seems to work fine, just does not update the log when faxes are sent or received.

  The software does not control the log of faxes.  The printer's firmware.  If not keep along as it should, there is something glitching in the firmware, or the internal connetion of the newspaper's fax modem has been disrupted.  If the internal connection was cut off, there is nothing that can be done, so let's try everything that can be done for the firmware.  There is no updated firmware for this printer, in order to fix this way came out.  The next thing to try is a couple of resets.  A hard reset first and a partial reset if the hard reset does not fix.

  To do a hard reset:

  1. Make sure that the printer is turned on.
  2. Pull out the power cord from the printer.
  3. Pull out the power cord from the wall.
  4. Wait 30 seconds.
  5. Plug back in the printer and turn it on.

  To make a partial reset:

  1. Follow steps 1-4 for a hard reset, but will not go past step 4.
  2. Plug the power cord into the wall, but connect are not in the printer.
  3. Press and hold the # and 3 buttons.
  4. While now the buttons, plug in the printer.
  5. When the lights come on, release the buttons.

  If reset does not solve the problem, then the connection was cut off, and there is nothing more we can do.

• Where is the list of all the questions I ask myself?

  Hello

  I did not use the community forums for a long time and I've noticed that things have changed and so I looked around to familiarize myself with the things again.

  However, I find is no longer the list of questions I have asked over the years and would love to be able to access them again if possible.

  Does anyone know that that they have been removed? Or if there is a way I can find my questions?

  Really appreciate your time and your help.

  Thank you!

  Click on your post: where is the list of all the questions I ask myself?

  Click on your name in blue at the top of your message

  Click on content in your profile under your photo and a little left.

  You should see a list of your messages.

• BlackBerry Smartphones cannot clear call logs

  I hope some can help me. I have a BB 8330, Verizon and I can't understand how to clear (delete) my call log list all at once. The only option I can find is to individually remove the unique entries, but not the whole list. Thanks in advance for any help.

  Mike

  Hello

  Just select one to remove, press the left SHIFT key and scroll to the bottom. You will see them change color

  Once you arrive at the menu low blow button remove.

  Let us know if you need anything that anyone else.

  If this answers your question please solve the problem using the options on the box Kudo.

  Thank you

• Portege M700: Question on the fingerprint log-in

  Hello

  I have my own Portege M700 today and I decided to perform a clean installation to remove the bloatware.

  Now, I installed an OEM Vista Business 32 bit and I installed all the drivers and software to make it work properly, for all, but a function.

  The connection option.

  How to configure application/toshiba fingerprint utilities into letting me have the option to type my password or drag my finger to log on?

  The default value of the factory were the two options available, but now I'm stuck with only 1 choice, and it bothers me a lot.

  Thanks in advance for your help.

  Hi Tristan

  It would be very interesting to know if you have found the answer to your question.
  Feedback would be appreciated ;)

  See you soon

• All-in-one Officejet J6400 Fax receive not always or not at all

  OfficeJet J6400, Vista.  Connected to the laptop via cable and wireless.  It is connected to the same phone number line, with the answering machine.  Settings seem correct and even when I had previous HP printer.  4 rings on the answering machine pickup and 6 rings for fax receive.  The fax does not receive.  Even if auto answer is on.  I am able to fax, manually. (have not tried otherwise)

  I have to figure out how to keep the auto answer on vs switch mode 'sleep' (of another post).  But sometimes it is not in Standby Mode and AutoA is off.   Regardless, machine does not seem to take faxes.  BUT, when you do the test with HPFaxme, it doesn't work. !

  And, when you use the HP Solution Center, all settings are made, and sometimes their fax Test does not work.

  Another question... in Fax configuration, which is PC modem in this question in quotes?  It's same as router? -"Are you using a PC modem (to access online services) on the same phone line as the device HP?   Answer is Yes or no.  Which is mine?

  I don't have DSL, and fax is on the same phone line. I have a DSL filter connected to the wire, of course.  Another wire goes from phone line in the wall (there is a separator) to the router.  This configuration refers to highest question?

  Is the best connection wireless or cable (printer for laptop)?

  Thank you!

  I'm back earlier than expected.  I never ran any patches of the HP link because another action (s) would have helped (which is recommended for another problem I had).

  So-

  I had the printer connected to the laptop via a USB connection and network.  (wire cable between the printer and the laptop and wireless through the printer setup)   Due to many problems to make the light stays on 'Auto response' (I posted on this separately in the recent past), I have the settings Fax arranged in a strange way to make this work.  So I didn't want to change these settings, what would be the recommended link for me to do.  For the problem of the 'auto response', I ended up connecting computer to the printer via the cable. And that probably contributed to this problem.

  I kept the two connections since and chose USB (OfficejetJ6480 copy1) wire as my setting of the printer preference in the settings box of the printer in Control Panel.  I think that even when I did the Wifeless-network connection preferably in the settings area of the printer in the Control Panel, the receiving fax machine or tests do not seem to work (even if it was some time ago and not tried recently).

  I think the duplicate connections was things confused.  The fax Test seemed to spend during a test of the printer settings button.  But he would not pass when the test has been made Fax Tools in the Solutions Center on computer. (And this I tested it today.)

  SO, I deleted the wireless network connection and the "device" (officejetJ6480) in the settings of the printer in the control panel.  I simply removed it.  I have left the "copy1 OfficejetJ6480" intact and continue the preference for the 'peripheral '.

  I have rebooted computer and run Fax Test of the printer and printer Solutions Center on computer configuration tool.  And they both passed Test.  Go figure.

  And also, the test of HPFaxMe works very well.    Thus, 3 tests have passed. !

  I hope this will be useful for someone even if it is confusion.

  But I'm sure that one of the hotfixes in the MissTeri link should help too.

  Thanks MissTeri!