8 always auto newspapers to the end user at the start of Windows

Similar Questions

• Is it possible to lock the start of Windows 8 on a monitor screen while accessing the office on another?

  Running HP EliteBook 8560w using the screen of the laptop and HP 2709 m as second screen; running Windows 8 x 64. I try to add a third monitor if it is possible to lock the start of Windows 8 on one screen.

  Thank you

  No, it is not possible then.

  But, if she were here, it would have been a great feature.

  Concerning

• igfxext module has stopped working message is displayed at the start of Windows 7. What is c?

  igfxext module has stopped working message is displayed at the start of Windows 7.  What is this and how can I fix?

  Hi Bob Bala.

  
  Thanks for asking this question to Microsoft Community!
  
  As I understand it you receive a startup message all to connect to the computer.

  He would be grateful if you can answer these questions to help you further.

  1. have you made changes on the computer before this problem?
  2. What is the brand and model of your computer?
  
  I would suggest trying the following methods and check if it helps.
  
  Method 1:
  
  You can try to check if the problem occurs in safe mode and check if it helps.
  
  Check out the link:
  http://Windows.Microsoft.com/en-us/Windows7/advanced-startup-options-including-safe-mode
  
  Method 2:
  
  If the problem does not exist in Mode without failure, then try to put your computer in a clean boot state.
  
  By setting your boot system minimum state helps determine if third-party applications or startup items are causing the problem.
  
  How to troubleshoot a problem by performing a clean boot in Windows Vista or Windows 7:

  http://support.Microsoft.com/kb/929135

  Note: After the boot minimum troubleshooting step, follow step 7 in the link provided to return the computer to a Normal startup mode.
  
  Thanks for posting the results and let us know if you need help to solve the problem and we will be happy to help you.
   

• Envy 17 Notbeook PC: SimplePass always asking to confirm the password on Windows 10

  Since the upgrade to Windows Pro 10, about a week ago, this happens whenever I try to drag to connect with SimplePass: I get a dialog box asking me to confirm my Windows password. I have to enter twice, and this works for me to open a session, it's boring. Why should I use SimplePass to save time logging if it asks me to enter my password TWICE?

  I've never had happen before moving on to Windows 10 and now it happens every time.

  I solved this problem on my machine.

  I went to the control panel in windows and clicked on element for HP SimplePass. He forced me to drag the fingerprint reader to continue.

  Once on the HP SimplePass screen came, I noticed in the upper-right icon (to the left of the help symbol) that looked like a laptop.

  

  By clicking on this icon checked for an update update was available, and he confirmed that I downloaded and installed. After the restart, I had actually had to go back to HP SimplePass in Panel configuration, and then click settings and change it to add my fingerprint.

  

  It now seems to work for me.

• Using the drive almost always at 100% at the start and sometimes at other times

  Recently, my laptop seemed particularly overwrought, even when executing threads. Whenever I start it (and also sometimes at random so that I use for light work), it is much slower than it has been in the past, and when I check the tast Manager, it says that the disc is in 90 to 100% almost every time. So I watch programs using the floppy and almost all of them use it with a rate of 0 MB/s, and all other use at a fairly slow pace. I know it's normal for notebook computers to slow down over time (mine is a little over a year old), but I wonder if it is an expected behavior. I find it odd that the drive is the treatment so furiously, but it seems to me that no program is really use it. I enclose below, pictures of my complete task manager a few minutes after starting.

  My processor is an Intel i7-4700MQ CPU @ 2.40 GHz and I have 12 GB of RAM.

  @MirandaSnow ,

  Hello and thanks for the display on the HP support forums.  What you have going here is not a hardware problem.  It is a common problem with windows 8.1 and an update.

  Here are some links that I could find that should help you with this problem.

  Use of the disk Windows 8.1 100%

  Windows 8 guard slows to grip and 100% use of the disk.

  How to fix: problem of its use for the drive 100% Windows 8

  Let me know how things are going with this.

  Thanks again for posting and have a great day.

• I have 2 windows 8 start after re-installation. How to remove the Starter defective windows 8

  After the first installation of windows 8, I got the error message. My second installation of windows 8 was Ok.

  Now I 2 windows 8 starts, it is OK and the second is defective. How can I remove defective Windows * boot 8.

  Hi Waldemar,

  Thanks for posting the question in the Microsoft Community. If I understand correctly, you get two options of Windows 8 start while connecting to the computer. I understand that it must be frustrating, but don't worry, we are here to help solve the problem and guide you in the right direction.

  I suggest you follow the steps:

  (a) starting from the DVD of Windows 8.

  (b) click on repair your computer.

  (c) click on troubleshoot.

  (d) click on Advanced options , and then click auto repair.

  (e) follow the on-screen instructions and complete the repair.

  If you still encounter problem, follow these steps and check if that helps:

  a. boot from the DVD of Windows 8.

  b. click on repair your computer.

  c. click Troubleshooting , and then select Advanced Options.

  d. click on command prompt and type the following commands and press enter after each command:

  Bootrec /fixmbr

  Bootrec /fixboot

  Bootrec /rebuildbcd

  e. restart the computer.

  f. check if the problem persists.

  If you are always faced with the question, please respond with more information, and we will be happy to help you.

  Thank you.

• Connection to the wireless network trouble at the start of Windows 7

  I have configured my computer will automatically connect to my home network, but at the start, it aims rather to connect to 'SoftAP-C0', a network with zero signal strength that probably belongs to one of my neighbors. It is impossible to connect and displays "waiting for users ' instead of 'connected' or 'disconnected '. I then have to disconnect this network manually connect to my network home and enter the security key. Because my computer never gets to actually connect to the network SoftAP, I can't access the configuration window to disable the automatic connection (if it is still what makes my computer trying to connect to it in the first place.) Is there another way to access its configuration (otherwise than through the network and sharing Center)?

  Hello

  You can see a list of available wireless networks and then connect to one of those networks, no matter where you are. The wireless networks appear only if your computer has a wireless network adapter and driver installed and the adapter is turned on.

  If you want Windows to ask permission before attempting to connect to a wireless access point, you can Turn off wireless on the laptop.

  You can have a switch on the laptop turns off the same. Turning off Wireless is specific to the model of the laptop.

  You can follow the links below to set up your preferred networks.

  How to prevent my computer from switching between two preferred networks?

  http://Windows.Microsoft.com/en-us/Windows7/how-do-I-prevent-my-computer-from-switching-between-two-preferred-networks

  View your preferred wireless networks

  http://Windows.Microsoft.com/en-us/Windows7/view-your-preferred-wireless-networks

  How to prevent my computer from switching between wireless access points?

  http://Windows.Microsoft.com/en-us/Windows7/how-do-I-prevent-my-computer-from-switching-between-wireless-access-points

  Hope this information is useful. Please let us know if you need further assistance.

  Concerning

  Rehman - Microsoft Support

• Cannot, in the start menu, Windows XP Home on my Satellite P200D edition installation

  I have Satellite P200D-12f and I got from Vista Home Premium with laptop.
  When I try to install Windows XP on another partition empty, and when I try to boot the CD with Windows Xp, laptop turns off after 10 seconds.

  I tried several times, but the same thing happens every time.
  Why is this happening?

  I may be a protection for which I can't install anything except Vista?

  Your problem is that you don't have the drivers for the SATA controller available when you move windows XP vanilla Plains. Without the SATA drivers, windows xp will not be able to see the partition that you created on the SATA drive.

  Good luck, but I suggest that allow you to manage such things as you may turn your laptop a very expensive pouf your place of purchase.

• Disable a program to the start menu Windows 8

  I have a desktop HP Pavilion last month. I have a search engine, searchconduit.com, invading my OS. I ran Windows Defender Quick Scan and full Scan, do not show any threat. I want to check the start menu to see if it's there and turn it off. I went to tools and tried to remove it, but the "Delete" button is not active.

  If she is not there, what everyone would say that I do to get rid of this problem?

  Thanks for sharing your knowledge.

  Hello

  There is a good guide on this withdrawal on the following link.  I would just say using the method 1 related to ccleaner and MBAM - also please note that you must use the versions free of these 2 applications.

  http://botcrawl.com/how-to-remove-conduit-search-malware/

  Best regards

  DP - K

• Icons are white or invisible at the start of windows 7.

  We have just upgraded a laptop Sony Vaio running Vista 32-bit Windows 7 Home Premium. There were not problems by installing the software and Windows loads fine but once it does all the icons on the desktop and in the menu start are either a box white or completely gone. The icon shortcuts seem to work when you double-click. The same problem occurs in windows Explorer. For example, in the pictures folder, none of the thumbnails are viewable. It's the same thing with the white boxes. We have updated the drivers and it doesn't seem to help. I also reset the icon cache and who still doesn't seem to help. The interesting thing is that if I start the computer in safe mode icons ARE visible. Any ideas on what can be causing this and what can we do about it? Let me know if more information on the specifications of the computer is required and I can post it. Thanks in advance.

  You have problems with programs

  • Error messages
  • Recent changes to your computer
  • What you have already tried to solve the problem

  Remember - this is a public forum so never post private information such as numbers of mail or telephone!

  Your post has nothing to do with Windows Update. Please repost in one of the following instead:

  Install, activate & upgrade
  http://social.answers.Microsoft.com/forums/en-us/w7install/threads

  Maintenance & performance
  http://social.answers.Microsoft.com/forums/en-us/w7performance/threads

  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• Lost folder of the Start Menu Windows XP Media Center shortcuts

  My system crashed a few weeks ago and I had to get it fixed.  I lost most of my programs, but reinstalled.  Yesterday I went to run an application in the menu START and the HANDLE has been note there.  Also my Microsoft Help and Support has disappeared.  Can you tell me how recovery these elements?  I have'nt had a chance.  Thanks Dyan

  Original title: Lost shortcuts folder of the Start Menu on Windows XP Media Center VERSION 2002 SERVICE PACK 3

  Control Panel, taskbar and Start Menu, Start Menu, tab customize, advanced.

  Scroll down and select what you would like to have in the Start Menu.

• Computer hangs for 15-20 minutes after the start of Windows - WinXP SP3

  Whenever I start my computer, once Windows has started (all the desktop icons have appeared), my computer treats something for 15-20 minutes, but I don't know what it is.  It freezes my computer for 15-20 minutes.  I don't have a lot of many software installed and there is no popup windows saying that some updates are being installed.  I have Win XP SP 3.  Can you help me?

  Hi KMForward81,

  ·         Have updates you installed?

  ·         You get the error message?

  Follow these methods.

  Method 1: Follow these steps:

  Step 1: Start the computer in safe mode with network and check if the problem persists.

  A description of the options to start in Windows XP Mode

  http://support.Microsoft.com/kb/315222

  Step 2: If the problem does not persist in SafeMode with network, perform a clean boot to see if there is no conflict of software like clean boot helps you eliminate software conflicts.

  How to configure Windows XP to start in a "clean boot" State

  http://support.Microsoft.com/kb/310353

  Note: After completing the steps in the clean boot troubleshooting, follow the section How to configure Windows to use a Normal startup state of the link to return the computer to a Normal startupmode.

  After the clean boot used to resolve the problem, you can follow these steps to configure Windows XP to start normally.

  (a) click Start, run.

  (b) type msconfigand click OK.

  (c) the System Configuration Utility dialog box appears.

  (d) click the general tab, click Normal startup - load all services and device drivers and then click OK.

  (e) when you are prompted, click on restart to restart the computer.

  Method 2: Run the disk check to check for possible errors.

  How to perform disk error checking in Windows XP

  http://support.Microsoft.com/kb/315265

  Note: If bad sectors are found in the hard drive, then it could try to fix this particular sector. If you have any data on that, it can get lost.

  For reference:

  How to make a computer faster: 6 ways to speed up your PC

  Slow PC? Optimize your computer for peak performance

• Computer to stall at the start of windows during the upgrade from XP to Windows 7

  During my update from XP to 7 files appear to load correctly from the disk installation, but when my computer only the first reboot, it crashes to the Windows splash screen.  I tried to boot with the floppy to upgrade without success.  If I bypass the boot CD to the Boot Manager screen helping with the selection of the installation of Windows, it still hold on the Windows start screen.  Can you help me with all the patches to this question?  Thank you!

  Turn off the PC, remove the AC power cord, wait 5 minutes and remove the (2) 256 MB sticks and the sticks of 2GB (2), it should then leave you with only one pole and a total of 2 GB of memory installed.

  Remove all PCI slots (e.g. SoundBlaster) cards. Remove the network adapters and VPN.

  Plug the power cord back, start the computer, and try again.

  J W Stuart: http://www.pagestart.com

• Disable the auto-update to the SYSTEM on windows

  I wrote an AIR application called via a command "exec" of php for my employer. This is part of an automated system where there is no user interaction. The problem is that whenever the application is running, every now and then he will open the update to Adobe AIR, waiting user input to allow the update or cancel.

  I downloaded the soft AIR Settings Manager, and he did a great job of disabling the auto-update feature, but ONLY for the user running the application. Is it possible to disable the auto update system?

  Hey Ozzy,

  The HKEY_LOCAL_MACHINE\SOFTWARE\Policies\Adobe\AIR\UpdateDisabled parameter to 1 will disable TIME updates for all users.  Adding the file%APPDATA%\Adobe\AIR\updateDisabled will disable the updates on a PER-user basis.

  Hope this helps,

  Chris

• app to auto-launch at the start of the device

  I need to run my application at startup of the unit. How to get there. I did a lot of research but doesnot find a good solution. I also tried to implement SystemListener and its different methods, but not the solution as powerUp() and powerOff() method is not called on device turns on or off. I have also tried to change the descriptor and setting auto run on startup but help out me. I ask everyone to please solve my problem as soon as possible because it is very urgent for me. Thanks in advance.

  With the help of which IDE is you you are developing the application... Is - this BlackBerry JDE or using Eclipse...

  If it's BlackBerry JDE then right click on your project and go to properties->, tab Application-click-> and select the check box for system Module & Auto Run on Start Up.