8 maximum audio stream?  WAITING FOR CUSTOMER URGENT

Similar Questions

• Please wait for the customer to political group - stop questions

  Hello

  I have problems with the closing of a machine. When the machine is connected to the corporate network, everything works fine. However, if the computer is connected to the VPN (1 hour or more) it is always suspended when it stops. First step in the shutdown process is:

  Please wait for the system event Notification service.

  This change after 3 minutes exactly. Next step:

  Please wait for Group Policy client windows 7

  is never exceeded (even after a few hours). Machine never off.

  Under newspapers there are always these 4 events when the machine stops in vain:

  1. 6005: the winlogon notification subscriber takes a long time to handle the notification event (Logoff).
  2. 4627: the event COM + a system expired attempt to fire the method of logging on the event {D5978650-5B9F-11D1-8DD2-00AA004ABD5E} class for the Publisher and the Subscriber.  The Subscriber has not responded within 180 seconds. The full name of the subscription is "ISensLogon2". The HRESULT is 80010002
  3. 6006: the winlogon notification subscriber took 180 second (s) to handle the notification event (Logoff).
  4. 6005: the winlogon notification subscriber takes a long time to handle the notification event (Logoff).

  Sense has expired after 3 minutes while there is no event 6006 for GPClient and machine is stuck there for centuries (Please wait for the customer to group policy). I noticed in the system logs that before the machine hangs during the shutdown process there are these errors and warnings:

  • 5783: the session configuration for the Windows NT or Windows 2000 Domain Controller \\server for the domain X is not admissible.  The current CPP of Netlogon call on \\machine to \\server was canceled.
  • 1014: name resolution for the name of the server has expired after none of the configured DNS servers answered.
  • 131: NtpClient could not set a domain peer to use as a source of time due to the DNS resolution error on ". NtpClient will try again in 3473457 minutes and double the reattempt interval thereafter. The error was: the requested name is valid, but no data of the requested type was found. (0x80072AFC).

  There is more than 1014 events for different servers and some 131. 5783 is always alone.

  I did a group policy log, because I thought that I will be able to see where the machine stuck. Below you can see the part of the newspaper GPSVC when the machine stops in vain:

  GPSVC (2d4.1cfc) 21:31:24:327 CGPNotify::UnregisterNotification: incoming with the event 0xe58
  GPSVC (2d4.1cfc) 21:31:24:327 CGPNotify::AbortAsyncRegistration: No asynchronous recording is in progress
  GPSVC (2d4.1cfc) 21:31:24:327 CGPNotify::UnregisterNotification: cancellation pending appeals
  GPSVC (2d4.1cfc) 21:31:24:327 Client_CompleteNotificationCall: failed with 0x71a
  GPSVC (2d4.1cfc) 21:31:24:327 CGPNotify::UnregisterNotification: cancelled waiting for calls
  GPSVC (2d4.1cfc) 21:31:24:327 CGPNotify::UnregisterNotification: dating dwStatus = 0 x 0
  GPSVC (438.1a04) 21:31:24:327 waiting for user group wire political end.
  GPSVC (2d4.1cfc) 21:31:24:327 CGPNotify::UnregisterNotification: incoming with the event 0xe10
  GPSVC (2d4.1cfc) 21:31:24:327 CGPNotify::AbortAsyncRegistration: No asynchronous recording is in progress
  GPSVC (2d4.1cfc) 21:31:24:327 CGPNotify::UnregisterNotification: cancellation pending appeals
  GPSVC (218.C88) 21:31:24:327 Client_CompleteNotificationCall: failed with 0 x 525
  GPSVC (2d4.1cfc) 21:31:24:327 Client_CompleteNotificationCall: failed with 0x71a
  GPSVC (2d4.1cfc) 21:31:24:327 CGPNotify::UnregisterNotification: cancelled waiting for calls
  GPSVC (2d4.9C8) 21:31:24:327 CGPNotify::OnNotificationTriggered: Completenotification failed with 1317
  GPSVC (2d4.1cfc) 21:31:24:327 CGPNotify::UnregisterNotification: incoming with the event 0xdcc
  GPSVC (218.1054) 21:31:24:327 CGPNotify::UnregisterNotification: incoming with the event 0x20cc
  GPSVC (2d4.1cfc) 21:31:24:327 CGPNotify::AbortAsyncRegistration: No asynchronous recording is in progress
  GPSVC (2d4.9C8) 21:31:24:327 CGPNotify::OnNotificationTriggered: Completenotification failed with 1317
  GPSVC (2d4.1cfc) 21:31:24:327 CGPNotify::UnregisterNotification: incoming with the event 0xd90
  GPSVC (218.1054) 21:31:24:327 CGPNotify::AbortAsyncRegistration: No asynchronous recording is in progress
  GPSVC (2d4.1cfc) 21:31:24:327 CGPNotify::AbortAsyncRegistration: No asynchronous recording is in progress
  GPSVC (2d4.1cfc) 21:31:24:342 CGPNotify::UnregisterNotification: dating dwStatus = 0 x 0
  GPSVC (218.D48) 21:31:24:342 Client_CompleteNotificationCall: failed with 0 x 525
  GPSVC (218.D48) 21:31:24:342 CGPNotify::OnNotificationTriggered: Completenotification failed with 1317
  GPSVC (218.1c04) 21:31:24:327 Client_CompleteNotificationCall: failed with 0 x 525
  GPSVC (218.1c04) 21:31:24:342 CGPNotify::OnNotificationTriggered: Completenotification failed with 1317
  GPSVC (218.1054) 21:31:24:342 CGPNotify::AbortAsyncRegistration: No asynchronous recording is in progress
  GPSVC (218.1054) 21:31:24:342 CGPNotify::UnregisterNotification: dating dwStatus = 0 x 0
  GPSVC (218.1054) 21:31:24:342 CGPNotify::UnregisterNotification: entering with the event 0 x 2100
  GPSVC (218.1054) 21:31:24:342 CGPNotify::AbortAsyncRegistration: No asynchronous recording is in progress
  GPSVC (218.1054) 21:31:24:342 CGPNotify::UnregisterNotification: dating dwStatus = 0 x 0
  GPSVC (218.1054) 21:31:24:342 CGPNotify::UnregisterNotification: entering with the event 0 x 1264
  GPSVC (218.1054) 21:31:24:342 CGPNotify::AbortAsyncRegistration: No asynchronous recording is in progress
  GPSVC (218.1054) 21:31:24:342 CGPNotify::UnregisterNotification: dating dwStatus = 0 x 0

  I excluded 1 GP machine and left on the VPN for a few hours, several times. He always stopped correctly.

  However I tried with the VPN disconnection before turning off the machine, I even turned off WiFi but machine still hanging. If I tried to get GP results it takes ages before stopping the machine and he's stuck in the step "to get the user name. Gpupdate/force will never update policy (it stops at policy update...). I tired with the installation of different patches that has not solved the problem.

  I think that there is that DNS issues while the machine is on VPN which led the GP cannot be applied. When the machine tries to close it is always somehow connected. There is no problem with the connection, no GP application script when the user disconnects, not roaming profiles.

  Does anyone have the same problems? All machines are Dell with Juniper NC (VPN).

  Thank you

  Hello

  The question you posted would be better suited in the TechNet Forums. I would recommend posting your query in the TechNet Forums.

  TechNet forum: For Windows 7 

  Hope this information helps.

• ORA-16191: customer main newspaper not connected waiting for shipment

  I'm getting this error after you start to roll forward in real time from standby and connect primary swtich. Using Oracle 10 g on RHEL 5 2 in vmware
  
  Excerpts from shows trace files-
  
  ORA-01017: name of user and password invalid. connection refused
  
  Logging of 1017 errors received on the eve
  ------------------------------------------------------------
  Verify that the primary and standby use a password file
  and remote_login_passwordfile shared or EXCLUSIVE.
  and the SYS password is the same password files.
  error ORA-16191
  It may be necessary to define the DB_ALLOWED_LOGON_VERSION
  the value "10" initialization parameter
  ------------------------------------------------------------
  Error connecting to host 16191 Eve destination LOG_ARCHIVE_DEST_2 "stdg1".
  16191 error attaching to standby host of destination LOG_ARCHIVE_DEST_2 "stdg1".
  ORA-16191: customer main newspaper not connected waiting for shipment
  2010-06-30 10:45:28.885 60679 kcrr.c
  Heartbeat PING [ARCP]: Unable to connect to the day before "stdg1". The error is 16191.
  
  Well the error refers to the password file. I created the file using the orapwd primary and copied standby utility using the scp command.
  
  Even after you rebuild the password file, it continues with the error.
  
  A solution for this much appreciated.
  
  Also need to know if can see the contents of the files of password somehow.

  Please follow the password file name conventions.if is Linux then the password file name should be like:

  For Unix (Shell)
  orapwd file = $$ ORACLE_HOME/dbs/orapw SID password = password_for_sys
  For Windows (command prompt)
  orapwd file=%ORACLE_HOME%\database\PWDsid_name.ora password = password_for_sys

  I think this can help you in... considering that I also encountered the same problem.

  Kind regards
  Shitesh Shukla

• Stuttering bleutooth audio stream spotify on new IOS 9.3.1

  Since a few days I experienced some very annoying problems with streaming audio of Spotify on my bluetooth radio.

  The music guard stuttering and it's even worse when I use my iPhone at the same time, for example, when I'm listening to music and unlock my iPhone the music stutters. also when I do nothing at some point the music begins to stutter.

  before I had no problem at all and that I could do whatever I wanted with my iPhone and always listening to music without stuttering!

  I checked if the problem is on the other music applications like youtube and apple music streaming, but it seems to stutter only on Spotify...

  normally, I'd say it's just the fault of Spotify and I'll wait for a bug fix, but the strange thing is that the problems started when I got the new IOS.

  I tried with my old iphone 4 with IOS 8 and which works very well...

  Help, please

  Edit: I have already searched the forum of spotify and discovered that more users (ios 9) have the same problem...

  Have you ever force reboot the phone by holding down the button sleep and home for 10 seconds, until the Apple logo comes back again?

  You won't lose data, but force the reboot can cure some problems after installing new software or applications.

• Audio stream

  Alrighty, so I dela final version (1.0.1) of waiting for the flash Sound class be properly supported with streaming audio, but still I get no sound, are there other means of audio stream / access raw audio data?

  It works fine on office air, right on the real playbook, because no sound...

  I'm basically just loading a url into a Sound object request.

  That is to say:

  soundChannel = soundObject.play();
  tunerController = soundChannel.soundTransform;
  tunerController.volume = volumeSlider.value;
  soundChannel.soundTransform = tunerController;
  audioIsStreaming = true;
  

  Any help would be greatly appreciated

  Just found things, seems the Sound API is not fully supported, but I managed to use the MediaPlayer... will see if I can hook up the SoundMixer...

• Audio streaming on the entire folio

  We have a customer who is interested in the creation of a 'radio' function, where we would have audio stream through the entire folio. The desired effect would be that audio play continuously and without interruption on each page of each article.

  I know that there is a way to read a local audio file across the entire folio. We have already tested which and it should work perfectly, but the customer would like the audio streaming on the internet because we cannot have the rights to incorporate audio files.

  Do you know if there is a provision to do something like that Adobe DPS? We heard that it might be possible using a set more like managers of browser, but I was unable to find any documentation about it.

  iPad only.

  We do not support creation of audio and video streams using the DPS, creative tools for the moment. There is no way to do it with an overlay of web as the overlay will get deleted from memory once that your player moves to another article.

  Neil

• waiting for device root

  Hello

  I'm getting the "waiting for root device" when trying to boot from a bootable usb key. Is this a problem with my hard drive or usb key. The mbp does not charge beyond that, so I'm not able to use the utility disc or AHT.

  The mbp needs a disc hard work to be able to boot from usb?

  Thank you

  Donny

  a MBP A1150 is a 15 "2006 MBP.  It will support the maximum OSX 10.6.8 is suggesting to your profile is already installed.  If the USB Installer is a more recent OSX, it can not be installed in your MBP.

  Ciao.

• Tecra M3 or get overheated - need to wait for the new motherboard

  My Tecra M3 (serial number X5621357G) fan started working at maximum speed in November.
  Technical support Toshiba in Greece kept for repair of 26 November 2007 to 14 December 2007.

  They changed the motherboard and the fan. After this repair, the fan started working again at maximum speed and immediately after that the computer has been 'frozen getting' (has stopped working - had to pull the power cable to restart).

  Toshiba service asked me to reinstall Windows, but this doesn't solve the problem.
  Took the computer back to ASP on December 24, 2007. Now, they say that it is still a hardware problem and they have to wait for a new motherboard. It will be available on January 7, 2008!
  I don't have a laptop for over a month.

  Post edited by: ADMIN

  Hello

  Really, I can understand your frustration and it s always a stupid situation if any equipment malfunctioning, and if certain parts need to be replaced.

  I guess you have to wait a little bit more because the motherboard seems to be on hand and must be provided of the warehouse of head of Toshiba.
  Extra, you should consider that you sent it to EPA on December 24, 2007 and as I m not wrong most companies and service points are closed for Christmas

  Good luck and please don t lose patience. Happy new year

• range poor when bluetooth audio streaming

  My Macbook 2015 beginning has brought very poor when audio streaming to bluetooth speakers. my laptop should be in 1-2meters for clear sound without interruption. the most and jump in and out sounds like and scratched old CDs. not in any wall or something just to work from one end of my room the other maybe 3 meters... I have a bar of his sony with streaming audio bluetooth and one pill of beats the range is compatible with the two speakers. If I use my iPhone 6 paired with the same speakers the beach is really good 6 + meters... I've already had the laptop replaced from jbhifi for this problem and the replacement is identical. have apple cheeped out on the inner workings of bluetooth on this model?   I was wondering if anyone else has similar problems of bluetooth with these new MacBook?

  No, my bluetooth works fine. I can even run around the House with my bluetooth headset. I could say, mine is 20 meters. Not sure, but I can go very far with it

• WTVConverter problem with multiple audio streams...

  The WTVConverter MSFT includes Windows 7 does not correctly handle multiple audio streams. The WTVConverter in the conversion of the format ".wtv' to '.dvrms' instead of keep the main audio stream retains the other stream audio visually impaired. Usually, he keeps the other stream audio visually impaired. NCIS and NCIS Los Angeles, CBS programs have this problem because they include signals SAP (accessibility for blind and partially sighted options)

  How can I tell WTVConverter to include only the main audio instead of the stream audio visually impaired

  Thank you

  Chandra

  Hello, Chandra

  If you think that there should be an option to select a stream when converting, you can leave your comments on the following link:http://mymfe.microsoft.com/Windows%207/Feedback.aspx?formID=195

  In addition, you can try searching for a free replacement program convert WTV files.

  David
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Still waiting for a response to my response of the extra info about "unable to access xbox live because of parental e-mail account misspelled".

  Because the e-mail account was misspelled, we try to get the reset password sent to the email address is not possible, the address it is not mine. I need to reset the e-mail address of origin to the correct spelling, but, so far have not received a response from (ANN N) after that I have repied to his request for more info on 17 Oct. Please don't leave me hanging, bad customer service.

  Hello

  Thanks for posting in the Microsoft Community Forum, please be assured that we would do our best to help you with this problem.

  You may need to wait for the response of the person concerned or if there is a problem with the Xbox Live account, check out the following link:

  http://support.Xbox.com/en-us/billing-and-subscriptions/account-management/change-Xbox-Live-account-info

  or

  http://www.Xbox.com/en-us/forums

  If the problem is with windows live account you can report the query in the following forum:

  http://answers.Microsoft.com/en-us/windowslive

  Hope this information helps. If you have any questions do not hesitate to answer, we would be happy to help.

• How to transcribe audio streams in real-time text?

  Hello

  Currently, I listen to a live audio stream voice using Communicator Desktop WAVE on Windows XP. I want to use a voice-to-text application to transcribe this audio in Word or Excel in real time. I'm looking to reproduce the same experience as the direct subtitles on TV. I read that Windows is a speech recognition software and there are also 3 application of the part such as Dragon NaturallySpeaking. Is it possible to what I can achieve this?

  Thank you very much

  dambk.

  Hello

  The speech recognition software is not transcribe audio voice to text.

   
  You can search in your favorite search engine for the voice to transcribe text software.
  Note: Using third-party software, including hardware drivers can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the use of third-party software can be solved. Software using third party is at your own risk.

  You can also visit these links to learn more:

  http://Windows.Microsoft.com/en-us/Windows7/set-up-speech-recognition

  http://Windows.Microsoft.com/en-us/Windows7/what-can-I-do-with-speech-recognition

• How to turn RT FIFO on a shared variable for custom control

  I try to get my shared variables behave: update when I tell them of and only update once. It's the sort of 2 separate problems. Update only once should be fixed by activating RT FIFO on the shared variable. However, if you create a shared variable by using a custom control (because your data type is not available on the menu drop-down), allowing RT FIFO is not available. Why is this? Will there be an another GUARANTEED way to do this?

  Description of my goal: after having many problems with a large scale of my real-time program version, I started from scratch. My program is that the bases in order to send a signal to my goal of running on a few D/A channels, then return the data that I read A/D channels to ensure that the waveform has the same appearance. In addition, the program should be able to repeat this process without having to reboot.

  -Host is a state machine with: initialize - reset variable, check that the UI events - start target, target stop and end program, send data - to create 2 waveforms and send it to the target using the variable "data entry" (table 2D-double), data Get shared - read the entire waveform on the different channels after it ran using the shared variable "all data output" (table 2D-double) , Write to the file - (does nothing), stop - program ends.

  -Target is a loop with 2 States inside: false - target does nothing as he waits to be the host to say 'Start', True - target Gets the shared variable input data, runs on 2 D/A channels and reads the equivalent A/D channels to make sure the waveform actually ran as expected. This happens in a deterministic loop with a non-deterministic loop waiting for the command "Stop" on the host. After the written entry, the D/A signals stop and playback of signals/a. are placed in a 2D array and sent to the host via a variable shared, "all the output data".

  -J' tried to put "all the data output" in a while loop which must reiterate if he does not obtain data in the specified time-out period. I also removed the while loop but kept the specified time-out period. In both cases, data are collected twice!

  -Without specifying a time-out, the host never gets data updates "all output data" before he goes into another State.

  Summary: I need update they once when I asked to a my shared variables. I think that my program is about as simple as you can get, so I'm surprised to see why he is currently not completely reliable.

  (I have attached the vi host, target the vi and variable)

  Hi FireIce,

  To answer your questions:

  1 RT FIFOs are supported data types can be pre-allocated space. This is to keep the determinism on the RT system.

  2. reading of the variable in the loop and have the chart outside the while loop will only show the last value of the shared variable, showing actually only a single reading. Then if it works for you, it will give the same result.

  Looks like you have network buffering enabled on your shared variables. Is this true? Shared variables must always have a value, and so it will continue to contain old data to the new data is written to it. If you have buffering enabled network, new data can be added after the former, which actually look like you read the old data twice before getting the new.

• More than 1 month and always waiting for out of stock keyboard SL410 + Win7)

  Hey I'm worried that the SL410 has a manufacturing defect in the keyboard. When I hit h I hu if I typed w I get \w. This question of strike fault is not present while typing on the keyboard. I'm also waiting on a keyboard of stock since 12/04/10 more than a month. I am so disappointed by the performance of this thinkpad. Also disappointed by the s/h in the replacement keyboard. I have to call, in the request, a service representative customer to help me with my case given the length of time that I've been waiting for my replacement keyboard.

  Hi Peter,.

  Thank you for following it upwards.

  The keyboard has finally arrived for a month and a half after the opening of the issue. When I replaced it, however, the problem persisted - which means there is a whole new motherboard. So this is a note for anyone who reads this thread with a similar problem on a SL410 - it's a motherboard problem, not a keyboard.

  Who had another week to arrive and the laptop is finally usable.

  Overall, it was a very disappointing experience with support from Lenovo. I don't know if it's just the SL range or a sign of things with org Lenovo support in general.

  -Leo

• receive unknown audio streams: How can I get rid of an external audio stream through my laptop? It sounds like a radio station.

  How can I get rid of an external audio stream through my laptop? It sounds like a radio station.

  Try this 1:

  Restore point:

  http://www.howtogeek.com/HOWTO/Windows-Vista/using-Windows-Vista-system-restore/

  Do Safe Mode system restore, if it is impossible to do in Normal Mode.

  Try typing F8 at startup and in the list of Boot selections, select Mode safe using ARROW top to go there > and then press ENTER.

  Try a restore of the system once, to choose a Restore Point prior to your problem...

  Click Start > programs > Accessories > system tools > system restore > choose another time > next > etc.

  http://www.windowsvistauserguide.com/system_restore.htm

  Read the above for a very good graph shows how backward more than 5 days in the System Restore Points by checking the correct box.

  See you soon.

  Mick Murphy - Microsoft partner