8500 A909a does not print in "black" when it yellow. It is color of ink required to print everything?

Similar Questions

• 8500 A909g does not print black

  Usually, I keep my scale, black project, gray ink printer settings only.  About a month ago the black became an off color.  It is still dark but not black.  Can someone help me.

  When the HP printed in black, they use actually the color inks, and more black.  When your black runs that it will still print black for a while, until the color begins to fail.  Check the level of ink in your cartridges.

• My printer HP Officejet 8500 A910 does not print form my computer.

  The rest is very good because it can print copies manually and scan, it's just that. It is not only my computer, but my mother and brother also cannot print from their computers. I don't know if my type of computer can help, but it's a Toshiba Satellite L645-S4102. Now, has happened since then that we have fixed our internet, because it did not work. Would be what? Please help, it would be really appreciated. Thank you.

  Hello

  
  1. what operating system is installed on the computer?
  2. do you get an error message when you try to print?
  3. the problem persists with a particular application?
  4. What do you mean by ' the rest is very good because it can print copies manually and scan'?
  
  Method 1: Perform the steps in the article mentioned below and see if the problem occurs.
  http://Windows.Microsoft.com/en-us/Windows7/why-cant-I-print
  
  Method 2: To update the printer drivers and see if the problem persists.
  http://h20000.www2.HP.com/bizsupport/TechSupport/DriverDownload.jsp?prodNameId=4083968&lang=en&cc=us&TaskID=135&prodSeriesId=4083864&prodTypeId=18972
   
  Method 3: check the links below and see if it helps.
  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-network-printer-problems

  http://Windows.Microsoft.com/en-us/Windows/help/printer-problems-in-Windows

  Hope this information helps.

• My HP Officejet pro 8500 Wireless does not print.

  I can copy and print from the printer or from scanning and printing but my HP computer will not send print data to the printer.  I tried to download the software to update drivers or diagnostic tools but the download cancels when it comes down to the end.

  I was able to solve the problem with the help of a technician of HP.  I had to do a system recovery.  It works fine now.  Thanks for responding.

• 8500 a does not print after mode 'sleep'

  My Officejet Pro 8500 has just started having this problem in the last two weeks. Every time the screen goes off I have to power and power on again to use the fax, copy, or scan functions. I can submit a print job, print manually, or receive a fax and the video screen shows it's printing, fax, or scan, but nothing happens. I have to stop working, power works, and it works fine. That is until he's going to return to the "standby" mode.

  I tried, without turning off the power, unplug the system, wait a few minutes, then by plugging it to the top. It made like a reboot. Is there any other suggestions that I can try? Have to do 10 to 15 times a day is getting old.

  Thank you

  It seems that this has solved my problem completely. I lit my saving in last night and was able to receive faxes from one day to the next. Seems to work very well this morning.

• Nothing does not open my tab when I click on it, what can I do?

  Nothing does not open my tab when I click on it, what can I do? Otherwise everything works fine. But I have to open many new sites of browser in order to work in different areas. I've updated my site so it's not the problem.

  The reset Firefox feature can solve a lot of problems in restaurant Firefox to its factory default condition while saving your vital information.
  Note: This will make you lose all the Extensions, open Web sites and preferences.

  To reset Firefox, perform the following steps:

  1. Go to Firefox > help > troubleshooting information.
  2. Click on the button 'Reset Firefox'.
  3. Firefox will close and reset. After Firefox is finished, it will display a window with the imported information. Click Finish.
  4. Firefox opens with all the default settings applied.

  Information can be found in the article Firefox Refresh - reset the settings and Add-ons .

  This solve your problems? Please report to us!

• Printer does not print black

  My HP4620 all-in-one printer does not print in black.  I put in all the new HP ink cartridges.  I used the 'tool' function to clean the printer heads (floors 1 and 2).  I downloaded the HP doctor and ran the diagonistics.  Nothing seems to have worked to get my printer to produce black text.  Once when I was feeling my test page appeared to them as an attempt very, very small printer to print black, but it is unreadable.  Any help would be appreciated.

  loml

  Hi @YvesD_fr,

  Welcome to the HP Forums!

  Now, Yes, you should be able to request a replacement. Will you please just phone technical support team in your area and they will help you better that they can

  Let me know how things are going for you!

• Photosmart 7510 - black ink cartridge does not print

  Recently, I replaced the ink cartridges on my Photosmart 7510 C311A. These are all the "genuine HP cartridges ', full.

  Black ink (with the symbol of the Pentagon) does not print, not at all. I ran through the standard troubleshooting steps:

  Cleaning of printheads

  Cleaning of copper contacts

  * Check for a good evacuation

  My colleague in the corridor as the printer even so I borrowed his black ink cartridge and tried: same problem. The printer does not record that there is a problem, but when I run printing tests, where there should be a black ink, there is absolutely none. All other colors print correctly.

  The printer doesn't lack NOT of the printer "align" test however does not offer a suggestion of what to do from there. I've not seen - in test reports - an indiciation of the misalignment.
  
  Suggestions on what to do now?

  I had the same problem. I had replaced the empty cartridge black and suddenly, no ink. Finally, what has worked is
  (1) I removed all the cartridges and cleaned the copper connectors with wet Publix.
  (2) I got a wet paper towel and he pressed repeatedly on the silver circular vent that would be under the black cartridge. I did until no black came. Let it dry.
  (3) I replaced all the cartridges and on the printer. I went to tools/clean the cartridge. I did it a couple of times and he finally printed black ink! I confirmed by going to tools/align, and align the cartridges successfully. He had kept before crashes when the black ink did not work.

• Photosmart 6510 does not print in black

  My photosmart 6510 does not print in black. I presume that it was the cartridge but I replaced the cartridge and it still does not print. I cleaned the print heads and the cartridge ink levels are full.

  The printhead, cleaning of the screen failed touchscreen printer running.  But when I sat down at my computer and used the program utility printing, he did.  I ran an initial print head cleaning my computer and then clicking the button indicating that the print heads were NOT clean.  He then ran a deep cleansing process.  Then I lined up the printheads of the same print utility program.  Now it works!

• HP Officejet 6500 a Plus: black ink cartridge does not print

  I have a HP Officejet 6500 a and have an operating system of Windows 10 on a Dell Inspiron 15R.  The printer does not print any black ink. I have genuine HP cartridges and the black cartridge is about 75% full. It was working properly until this morning. I downloaded your troubleshooting and everything seems fine. I ran the program cleaning head several times, but I can't always get black ink on a page. The other colors are fine. After the second head cleaning, I got a very small black image, but head cleaning has resulted in no black ink. I made sure that the wind had been reached on the cartridge and this problem occurs with wireless and hard wired connections. Time before, it happened and when I replaced the cartridge, it worked. After reading some of the messages on the map, it seems not to be the solution. I also hesitate to throw a cartridge that is only 25% used. Can you help me?

  Hello @robertj138,

• OfficeJet 6000 E609n: One color (black) does not print

  Background the color black does not print.
  Background page printed from the printer status indicates that there is no black ink. This impression has said that there is sufficient (at least 20%) supply of three coloured inks. Per the comment above, no black printing does appear on the page printed of the status of the printer, even if the black cartridge has been rather recently installed (2015-12-24).
  Background none of the four "low ink" lights on the printer are turned on.
  Background the State indicated by the HP Solution Center utility displays a green check mark, that is to say, that everything is OK.
  Background the "estimated ink levels" in the utility HP Solution Center indicate that the black ink cartridge is about 60% full.
  Background I've done the first of these two cleaning procedures to clean the print head. It produces no change. (In fact twice.)
  Background I removed the power cord to the printer and unplugged the power cord from the source and then wait 10 seconds. Then I reconnected things together. Nothing has changed.
  Background I cleaned the vent for the black cartridge.
  Background I replaced the black cartridge. The level indicated on the "Estimated ink levels" in the HP Solution Center utility now indicate that the black ink cartridge is 100% full.  No change.

  Background now, I think that the problem may be the print head.  I am discouraged.

  Any suggestions?

  Hi @Upper_Left,

  It seems as if the HP product registration service is temporarily unavailable.

  Normally you get invited to register immediately after installation is complete.

  It's a Web page that can help you know if the printer is listed, or as aid re-register once the number of available service - Registration Question Index.

  The term of defective kernel is used which means that the defective part you are replacing is the same part that you send back.

  When you select the option to change the replacement part is usually repaired or refurbished, is why there is such a difference in price between the parties. It seems that if the defective part is not returned within the specified time. 'faulty base tax' is loaded.

  I can't say for sure 100% that the problem will be resolved to the replacement printhead. If the printer was in warranty, it would be the normal order of operations.

  Please click the "accept as Solution" and the "thumbs up" button up on top of my first response above and other similar issues may find the easiest solution.
   
  Thank you!

• Photosmart HP 6520: For HP Photosmart 6520 black print cartridge does not print

  My printer suddenly decided to not print black ink, the indicator showed still had about 30 percent ink left, but when making the diagnosis of quality black ink pring was incomplete printing.  I did an alignment of the printer and cleaned the printheads, still nothing, black does not print clearly.  I bought a new ink cartridge, of the March 2017 expiry date, did the same steps as above and nothing.  The black box is now completely empty.  My previous printer was a 6510 HP which has begun to do this, and after losing a ton of ink clean print head, etc., I ended up buying just the 6520.  It is now out of warranty as of October 2014, but black ink does the same thing as ink color on the 6510.  I watched throughthe for answers forums, tried to soak the cartridge in case it has been clogged, etc..  None of the above helped me, and I am not interested in buying ANOTHER printer.  Any thoughts?

  One of the questions forum indicated that l ' turn off from one day to the next, sometimes worked.  I turned it off last night and just turned on today, and works in ink!  Not sure if it was the rest overnight or clog with water, but today he works.

• Text in black does not print

  HP6510 blocked by elderly neighbour printer: removed from the jam and I tried test print from QUICKEN. Color printed but black would not. I tried text printing of the WORD that does not print. Tried again in color that worked. Ran all controls on the screen including cleaning, align etc and tried to print the report... still no black. Installed new cartridge and checked for bent parts or tightening (found nothing), but got the same results with the same tests (several times).

  Is there something unique about BLACK?   Stock replacement cartridges are more valuable than the printer itself.

  Can someone point me in the direction of correction? Yes, I suppose I asked you to tell me where to go.

  PROBLEM SOLVED!

  Cleaning cycle which has not corrected the problem ran previously. Removed all cartridges and reconnect firmly.

  Although this was the second try on this solution, sounded an audible 'click' when the black cartridge has been reinserted.

  Thanks for the support

• OfficeJet 660: My printer does not print in black only

  I want to print in black and white, but my printer does not print because my yellow ink is empty.  I tried to change the color to black and white, but it still won't print. Seems ridiculous that all would have to have something in it just to print in black and white.

  You have an Officejet 6600?  This printer has a print head permanent and separate ink supplies.  Little ink is required in all colors to print, even if you print in black only and only one of the colors came out.  (When printing in black color print head is always waving around in the air.  There are few available ink to prevent the nozzles from drying out and butcher them.)

  See here for more information on how the ink is used.  In the terminology of this document, the Officejet 6600 is an IIC printer.

  Sorry, you need to replace the ink color depleted.

• HP Photosmart 5520 does not print in black ink.

  Black doesn't print not... except on the print quality diagnostics page where the text and black frames around boxes all print in black.  Inside of the 'Black' box is empty, however.  When I try to print a page of type, it is either totally empty or very indistinct.  How is that possible?

  I saw three other posters with this same problem, everything from 21/01/14 and no answers to the problem.  All the patches of troubleshooting on the Web page do no good.

  My warranty has expired also.  Is this a systemic problem?  How do we get fixed?
  

  Hi RAJP-52,.

  Welcome to the HP Forums, I hope you enjoy your experience!

  I understand that the black is not printing on the computer but prints partially on the diagnostics page.

  I'll be happy to help you.

  I don't know what you have tried so far the fix, but I included a few documents to go through the steps to see if we can solve this problem.

  This printer has a permanent print head. You can always run however of cleanups on the print head.

  This document is intended printer does not print black ink or color ink or prints blank Pages.

  Here is a document to clean the contacts of the cartridge.

  'Cartridge problem,' 'Cartridge missing or damaged', or 'Not compatible ink cartridges' Message is displayed on the control panel.

  Please let me know the results if you are still having problems.

  You use genuine HP cartridges?
  Check the date on the cartridge to make sure that they are still in warranty. (not old stock)
  What are the ink levels?

  If you like you can print a new diagnostic test page, scan it and include it in the post, I can take a look to try to find a way to solve this problem.

  Thanks for posting on the HP Forums.
  Good day!