8710 incoming numbering questions

Similar Questions

• Blade Server 8710 TP license question

  We have several TS 8710 blades with interop licenses, return of the pre-CTS-1 time TP, 74 CTS supported native interop.

  We get more than 8710 blades.

  TS 8710 s still need licenses interop TP to work with 3-screen/TIP to the CTS-3000/TX9000 running units 1.8 +, or this license is required for non-Cisco multiscreen endpoints?

  Hello Nick

  As far as I know, I don't think that you will not need interop multiscreen license for the new 8710 TP as the in charge will POINT by default.

  Everything that you could need is license screen for purchased new blades. Please see the link

  http://www.cisco.com/en/US/prod/collateral/ps7060/ps11305/ps11317/ps11339/data_sheet_c78-626140_ps11340_Products_Data_Sheet.html who said LIC-8710-TPI to the original purchase. If this license can be valid for the purchase of old like the one you already have. However, it is best to confirm with your Point of contact for sales of Cisco.

• Numbering questions

  I am trying to start my numbering at page 3.  So I want to page three to read 1.  Is this possible?  I created my numbering in my master pages and have implemented the first two pages without numbering box.  So I don't have all the numbers on these pages, but the three page still reads 3.

  Right click on page 3 in the pages Panel and choose options for numbering and section, then start a new section and start numbering at 1. ID complain until you change the numbering of the sections.

• Preserve CMYK numbers Question...

  I have a couple of Xerox printers I did color for profiles and trial and error it seems that profiles only work if I uncheck preserve CMYK numbers. Is this correct and should I leave this unchecked? I am very ignorant when it comes to color profiles, but I'm learning.

  The only downside of it leaving unchecked seems to be this black guy and bar codes appear to be an accumulation of color rather than a pure black.

  That is right. The numbers must change to maintain appearance when you convert to a new profile, but there downside is that your black must also put in place a 4-color black to preserve its aspect as well.

  If the final destination is the xerox, why not assign the profile of xerox as a document workspace?

• Page numbering question

  Hello forumers.

  Im having trouble get my numbering as the id of the pages.

  Here, in this simple example, I have 5 pages.and im trying to get the page 2 to be where the numbering begins.

  so that means page 2 say 1. so im going to the > numbering and section options.

  I click on the start page number and type in 2. and then click ok.

  but nothing happens.

  But what im trying to achieve ot's, since im a little document.and 5paper I of the 5 pages.

  the cover which is page 1 should not have a page number.

  

  Right click on the first real Page - go options numbering and Section - together Style to something like Roman numerals - say ok

  Right-click on the Page 2 and go to the numbering and Section Options - set to start on page 1.

  Just to note: is very unusual - normally the odd numbered pages are on the right side. So you'll see pages jump so that 1 is now on the right page.

  If you want 1 on the left side, go to Pages panel and uncheck the box in the menu on the left of the Panel - allow the Pages of the Document to Shuffle, and then manually drag Page 1 to the left of the line.

• Slide numbering - questions about Captivate 3

  I am putting together a new CBT I want to enter my PowerPoint slides.

  However, I plan to do several of the slides is available only when you press a 'button' on a particular slide.

  (for example.  Slide 5 there will be 2 buttons, it will lead to slide 28 then return, it will lead to slide 29 then return)

  I'm looking for is the removal of any slide numbering when I publish this project.

  I don't want the Viewer to see that they went from slide 5 to 28 and then back to 5.

  I understand that most people want their slides were soon, but for this project, I'm heading in the other direction.

  As the title suggests, I am using Captivate 3, which unfortunately that power will not pay for the update to Captivate 4.

  Hello

  If you do not use a playback control, there is never any indication that the user is on different slides. Even if you use a playback control, the only time I am aware that the indication of the number of slide is present is when you place the cursor or drag the progress indicator.

  See slide numbers in another area? If so, can you post a screen shot here? If you do, please insert inline using the camera icon. Do not tie. Attachments must be approved before that everyone can see them.

  See you soon... Rick

  Useful and practical links Captivate wish form/Bug report form Certified Adobe Captivate training SorcerStone blog Captivate eBooks

• Satellite Pro Graphics Driver - OpenGL version low-income L870 question

  Trying to recover a part of my working on my new L870 3D graphics software, he complains that the opengl version is too weak at 1.1. The ATI HD 7670 M supports up to 4.1.

  I downloaded realtech VR OpenGL extensions Viewer, it also reports OpenGL 1.1. He also pointed out under "GDI Generic" rendering, but it should be "ATI Radeon 7670 M" I think that (judging by the post [here | http://forums.steampowered.com/forums/showthread.php?t=2487900]).

  The Catalyst Control Center seems to think that the card works well. So I tried to update the drivers to see if that helped. The latest drivers from Toshiba (8.982.7 - 120808 a 14704), the [zip file | http://support1.toshiba-tro.de/tedd-files2/0/display-20121023172326.zip] is damaged (checksum fails), and he tells me that previous drivers (8.982.10.6 - 120918 a) are already installed.

  Any suggestions to get OpenGL > 1.1 work would be appreciated!

  Thank you

  Hello

  OpenGL is an open standard API, but more often the DirectX designed by Microsoft is included in the graphics card driver for OpenGL enters the market of professional graphics, DirectX, DirectX is used primarily for computer games.

  However, if you need a driver supports OpenGL then you need a driver updated him from some 3rd party sources.

  ATI drivers can be downloaded from the page AMD directly or on sites like omegadrivers.net
  But use at your own risk.

  In addition, to install these drivers, you will need to use a special procedure. I mean by special procedure installation via the Device Manager where you could choose the driver manually.

• Redemption numbers questions

  I renewed my subscription through SCAD and when I tried to put the number of redemption, it said it was already in use. I had just renewed, so why this phenomenon happens?

  Contact adobe during the time pst support by clicking here and, when available, click on "still need help," http://helpx.adobe.com/x-productkb/global/service-ccm.html

• Numbers rounded to a certain extent the price

  3.6.1 numbers question: I need help with a formula of round our price to xx.95 results. Where each product is an avec.95 price. I tried roundup and ceiling and cannot understand it. Thank you very much!

  Bill,

  Here is a simple solution that has a hole (in my opinion):

  

  column A contains the current prices and B contains the values "corrected".  From line 8, you can see that the prices are reduced by this method.  What is your intention?  You can share what you want the rule to the prices of the inputs between x.95 and x.99?

  the formula is:

  = INT (A1) + 0.95

  B1 = INT (A1) + 0.95

  This is the shortcut dethrone select cell B1 and type (tor copy and paste here) the formula:

  = INT (A1) + 0.95

  now select cell B1, copy

  Select cells B1 at the end of column B, paste

• Question about extensions.

  It's the defination of tablesapce I had for my tablespace DBMS_METADATA usng
  
  CREATE TABLESPACE DATAFILE 'ABC_DEFAULT '.
  ' / aspdev/db62ora1/oradata/ICDEV/ABC_default.dbf' 209715200 SIZE
  AUTOEXTEND ON NEXT 131072 MAXSIZE 32767M
  ONLINE REGISTRATION PERMANENT BLOCKSIZE 8192
  EXTENT MANAGEMENT LOCAL SEGMENT SPACE MANAGEMENT AUTO AUTOALLOCATE
  
  (1) how many degrees will be created when creating a tablespace.
  (2) how many degrees will be created at the first table created.
  (3) when the file gets spread extensions how many will be created.
  
  I'll try to find the space used in the tablespace and although I am inserting data in many table always use the storage space does not increase. and also the total number of bytes in the user_extents does not increase.

  user445775 wrote:
  It's the defination of tablesapce I had for my tablespace DBMS_METADATA usng

  CREATE TABLESPACE DATAFILE 'ABC_DEFAULT '.
  ' / aspdev/db62ora1/oradata/ICDEV/ABC_default.dbf' 209715200 SIZE
  AUTOEXTEND ON NEXT 131072 MAXSIZE 32767M
  ONLINE REGISTRATION PERMANENT BLOCKSIZE 8192
  EXTENT MANAGEMENT LOCAL SEGMENT SPACE MANAGEMENT AUTO AUTOALLOCATE

  (1) how many degrees will be created when creating a tablespace.
  (2) how many degrees will be created at the first table created.
  (3) when the file gets spread extensions how many will be created.

  I'll try to find the space used in the tablespace and although I am inserting data in many table always use the storage space does not increase. and also the total number of bytes in the user_extents does not increase.

  Anurag answered your 3 numbered questions. As for the implicit question in your closing statement...

  When you create a table, a point is allocated out of free space of TS. This measure is dedicated/reserved for this table. Let's say the measure was of 1 MB. Until you insert more than 1 MB of data (well, about - not enter into fresh block overhead, etc.) it is not necessary to allocate an extra point. Until you reach the point to assign an additional measure, the use of tablespace will not increase. The only use of the tablespace cares is extended. If a measure is full, half-full or empty, the simple fact is it is attributed is what takes the place of storage.

  So let's say that you create a tablespace nine of 500 MB. You have (approximately) 100 MB of free space. (even once, we will ignore air minor and questions). Now, you create 10 tables, each with an initial measure of 10 MB. Each of the scopes has 10 MB of space and you have consumed 10 ch X 10 MB of storage space. You have not yet inserted all the data, but you have consumed 100 MB of space for your table. leaving you with 400 MB of free space. Now, let's say insert you 9 MB of data in each of the ten tables. Blocks that have received these lines were in the already allocated extents, so no additional scope should be allocated. So use of tablespace has not changed.

• Slate 7 ultra voicetab 3901 phone no. problem recording

  Recently, my slate 3901 ultra 7 phone record missing.  What file/list of incoming calls that were already in my phone, but it showed that the numbers instead of name in documents.  After somewhile to try again, retrieve it from phone name list is displayed again, but more time, it's disappear but only the incoming numbers.

  I had to use ESET antivirus scanner phone my phone deeply and not found any virus & spy!

  Please have everything to solve my problem, thanks a lot!

  Hi there @valentleung

  I understand that your phone is no longer displays call information you expect. I'm happy to help you.

  I suggest that you back up the data to an external, if possible device and then try a reset for your VoiceTab:

  HP tablets - performing a factory reset on your tablet (Android KitKat, Jelly Bean)

  Follow the steps in the topic: reset of the HP Slate VoiceTab 6 or 7 VoiceTab slate

  Let me know if it works for you.

• How to recover a document that has been replaced by another

  I typed up a test last week & had another type until today. I wanted to use the same layout I did for the other so I open previous & edited the info according to the numbered question. By chance I hit save him. NOT save as & the new assignment has replaced the last of them. I desperately need one of last week that it is due tomorrow & I won't have the time to type all upward again. In addition, I threw the draft documents (time of bonde) and have nothing to do now as all other material already submitted PLEEEEEEEAAAAASSEEEEE help me. Its a few pass or fail & if I fail, it will say the last 6 years of study have been for nothing. My teacher is a cold hearted troll who doesn't accept excuses.  Please help me =)

  Hello

  ·         What operating system is installed on your computer?

  Response with above information to better help you.

  I suggest you try the option of previous versions and check if you are able to find the file, follow the steps described in the following link:

  http://Windows.Microsoft.com/en-us/Windows7/previous-versions-of-files-frequently-asked-questions

  If you created the document using Microsoft Word and referring to the Microsoft Word document, I suggest you to send your query to the Microsoft Works community. Please visit the link below to find a community that will support what ask you:

  http://answers.Microsoft.com/en-us/Office

• I CAN'T ACCESS MY HOTMAIL AND NOBODY IS THERE FACT!

  I DESPERATELY NEED SOME HELP HERE, PLEASE SOMEONE!

  I signed up for my account hotmail years ago and God knows what I did for my information. I know I should have been more careful with my personal info, but I was not.
  I tried OVER AND OVER AND OVER for a week, very patiently trying to get help from hotmail and all I am sent is a pathetic Questionnaire that tells me I don't have enough information.
  what I need is an extremely valuable Email and important on my old account my work DEPENDS ON, I lose customers as we speak. I built something for me and I can't lose it because of a complication of e-mail!  my time is running out and this is my last resort, I have no idea what to do next... im out of options
  I got NO response from hotmail so I did not have the numbers question or anything that can be useful in this case.
  I can't express enough how much it is important.
  PLEASE CAN SOMEONE HELP ME NOW!
  I will forever appreciate it and do something that I can
  Cait

  See here...

  http://Windows.Microsoft.com/en-us/Windows/Outlook/hacked-account

  The procedure to recover a lost account is difficult to prove, and the chances of resuming are not good at all.

  In the future, for important emails, use an ID email provided by your ISP, and not a freebie account for which there is no real support

• Smart call connector toolbar Info

  Hello

  I was wondering if someone could clarify some points of confusion that I have on the Toolbar from Smart connector call?

  Is it possible to have it search incoming numbers against Outlook contacts and display the correct name?

  I get the correct names if the number is in the directory, but I can't for the life of me configure it to use Outlook although the documentation seems to allude that it's possible.

  I use the latest version of the CSC independent x 32 client and Outlook 2007 (him button marked 'activate Outlook search' is checked) on Windows XP.

  Also, is the call connector free skilled man for autonomous use or don't each need a license use (we have a UC560)?

  Thanks in advance.

  Kind regards

  Alex

  Hi Alex,

  Smart CallConnector free toolbar has no research supported. The free version does not require allowing and basically can dial and click-to-dial. Other products CSC Adv-customer, operator of the CCS, CCS autonomous operator argued as long we have MAPI enabled and connected the right profile in the menu preference and many other search features.

  Thank you

  Team CallConnector

• How to contact adobe

  Wow, they sure hide tech and selling phone numbers!

  They have Lightroom I want to buy, then it says $9.99 per month, I am now assuming that the average price for the cloud?

  Someone at - it sales batch numbers, questions for them.

  Thank you very much...

  Yes, this is the subscription price for photography on the Cloud Cloud Creative price and plans for membership program | Adobe Creative Cloud

  Buy http://helpx.adobe.com/x-productkb/policy-pricing/adobe-stores-online-order-payment-faq.ht ml