8900 Simulator have no Signal.

Hello everyone,

8900 Simulator have no Signal. It shows OFF instead of signals.

What should do

Hello

Click the 'Manage connections' and select the Mobile network.

Thank you

Kanak

Tags: BlackBerry Developers

Similar Questions

I have a winsock error, so IE won't connect, even though it says I have full signal. If I format the hard drive and reinstall xp it will fix the problem?

Winsock error

Hi I have a winsock error, so IE won't connect, even though it says I have full signal. I got the fix for microsoft programs, nothing has worked, if I format the hard drive and reinstall xp it will fix the problem. Thank you

Hi I have a winsock error, so IE won't connect, even though it says I have full signal. I got the fix for microsoft programs, nothing has worked, if I format the hard drive and reinstall xp it will fix the problem. Thank you

Check that your antivirus (all-in-one suite If you have one) is not turn off your network traffic.

Note the devices installed in the machine. Use this information to download the latest version of the drivers and software for the manufacturer's Web site features (on another machine and store on an external support, I suppose, would be the only way for you to do.)

Uninstall the software/drivers for network devices. Turn it back on. Even if pilots are found/installed automatically, manually update the drivers & software using the files you downloaded earlier.

Download, install, execute, update and perform analyses complete system with the two following applications:
- MalwareBytes (FREE)
- SuperAntiSpyware (FREE)
Remove anything they find. Reboot when necessary. (You can uninstall one or both when finished.)

Search online with eSet Online Scanner.

Open a command prompt and run the commands following one at a time (after each ENTRY) without leaving the part through if somehting started working... Note all errors and post them here.

netsh winsock reset catalog
ipconfig / renew
ipconfig/flushdns
ARP d *.
nbtstat - RR

Im having truoble internet connection, even if I have a signal and everything is connected

Im having truoble internet connection, even if I have a signal and everything is connected. I ran the repairs and doing what he had asked, however I am still unable to connect to the internet?

I have a WiFi router, and even if my desktop pc lacks a coneection wirless, I bought a wireless adapter for it, so I can connect to the internet, but there is a problem with the connection. everything worked fine and then it just stopped and refuses to connect. I run the diagnostic report and followed the instructions but it does not connect truncated. What can I gdo now?

Hello

1. you get any error message?

2. don't you make changes to the computer before the show?

Please follow the steps below.

Method 1:

Follow the steps mentioned in the links below

Windows wireless and wired network connection problems

http://Windows.Microsoft.com/en-us/Windows/help/wired-and-wireless-network-connection-problems-in-Windows

Solve problems, find wireless networks

http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-finding-wireless-networks (Also applies to Windows 7)

Method 2:

Follow the steps mentioned in the link below.

http://Windows.Microsoft.com/en-us/Windows7/how-do-I-fix-network-adapter-problems

Net_rim_bb_phone_app (64) application is unresponsive; process ended the Blackberry Javelin 8900 (Simulator)

Hi all.

I have PhoneListener custom (up to AbstractPhoneListener).

During the disconnected call (callDisconnected), I show animation countdown. It works very well on "BOLD" (Simulator and device), but I am getting error Application net_rim_bb_phone_app (64)... on 8900.

Animation is indicated, but after a few seconds he broke down with the error.

Please take a look of my code and say what I've done wrong, thanks.

  public void callDisconnected( int callId )    {        if( RedirectOptions.getInstance().isInjectingEndCall() )        {            // Reset            RedirectOptions.getInstance().setIsInjectingEndCall( false );

            showCountdownAnimation();        }    } 

private void showCountdownAnimation()    {        final AnimationPopup popup = new AnimationPopup();

        CountdownBoardField countdownBoard = new CountdownBoardField();        countdownBoard.setAnimationListener( new AnimationListener()        {            public void onAnimationStart()            {            }

            public void onAnimationEnd()            {                UiApplication.getUiApplication().invokeLater( new Runnable()                {                    public void run()                    {                        if( popup.isDisplayed() )                        {                            UiApplication.getUiApplication().popScreen( popup );                        }                    };                } );

                if( popup.isIsInterrupted() )                {                    injectRedial();                }                else                {                    runChirp();                }            }        } );

        popup.add( countdownBoard );

        UiApplication.getUiApplication().invokeLater( new Runnable()        {            public void run()            {                UiApplication.getUiApplication().pushGlobalScreen( popup, 0, UiEngine.GLOBAL_MODAL );            }        } );    }

Discussion of animation: (CoundownBoardField)

/**     * Handles the animation.     */    private class AnimatorTimer extends Timer implements IAnimator    {        // #region Fields

        private int mType;

        private boolean mKeepGoing;

        private boolean mEventsAllowed;

        // #endregion

        // #region Constructors

        public AnimatorTimer()        {            super();

            mEventsAllowed = true;        }

        // #endregion

        // #region Implementation

        public synchronized void denyEvents()        {            mEventsAllowed = false;        }

        public synchronized void allowEvents()        {            mEventsAllowed = true;        }

        public synchronized void stopAnimation()        {            mKeepGoing = false;        }

        public synchronized void startAnimation()        {            mKeepGoing = true;

            run();

        }

        public boolean isAlive()        {            return mKeepGoing;        }

        private void fireOnEndEvent()        {            CountdownBoardField.this.mAnimator = new AnimatorTimer();

            if( mListener != null && mEventsAllowed )            {                mListener.onAnimationEnd();            }

        }

        public int getAnimationType()        {            return mType;        }

        public void setAnimationType( int animationType )        {            int type = animationType;

            if( animationType == Constants.ANIMATION_DEFAULT )            {                type = Constants.ANIMATION_PROGRESS;            }

            mType = type;        }

        private void doProgressAnimaion()        {            TimerTask task = new TimerTask()            {

                public void run()                {                    --mAngle;

                    if( mAngle <= 0 )                    {                        mKeepGoing = false;                    }

                    if( !mKeepGoing )                    {                        // stop timer                        cancel();

                        fireOnEndEvent();

                        return;                    }

                    UiApplication.getUiApplication().invokeLater( new Runnable()                    {                        public void run()                        {                            invalidate();                        }                    } );                }            };

            super.scheduleAtFixedRate( task, 0, mTimerInterval );        }

        public void run()        {            switch( mType )            {                case Constants.ANIMATION_PROGRESS:                {                    doProgressAnimaion();                }                    break;

                default:                {                    throw new NotImplementedException( "Animation type: " + mType );                }            }

        }    }

* AnimationPopup lance animation when invoked:

 protected void onUiEngineAttached( boolean attached )    {        super.onUiEngineAttached( attached );

        if( attached )        {            int count = getFieldCount();

            for( int i = 0; i < count; i++ )            {                animate( getField( i ) );            }        }    }

Thanks for help.

I solved the problem by adding some Thread.yield () in the wire of animation loop.

The problem is Simulator suspended for a little time when disconnects the call. I guess, it's simultaor only 8900 problem.

However, I changed my code and treatment events throug global event listener.

8900 comm http hangs after the second connection (do not view with the 83XX devices or 8900 Simulator)?

Hello

I currently have a j2me application that is deployed in production on different devices of BB. The application is pretty simple and mainly collects the data of the user (via text fields, drop-down list boxes etc.) and send these data to our server via an http connection

The application was deployed in production for more than 6 months and work with end users using various BB devices, like the 8310, 8320 and 9000.

Our end users now upgrade to the 8900 and we assumed that our application would work in the same way as the 8320-I even tested my app on the Simulator to 8900 and everything works fine.

However, using the app on a real 8900 device connected to the network Vodafone here in the United Kingdom has cast some weird problems. The app installs fine OTA, communicates initially very well (as we connect via an http post), but then any attempt further communication over http hang everything simply no error thrown?

Closing the application does not have any change, and blocking any attempt at communication. If I restart the device (battery etc) and start the application then I can connect once more, and then the app just crashes again.

I can't find the cause, and the fact that other physical devices and even the Simulator to 8900 work very well is weird!

Any help or pointer to start looking in my code/settings would be appreciated?

Daniel

Please make sure you close your connection. or check if the current connection is close before opening another.

Simulation of sine signals

Hello

I'm trying to simulate sinusoidal signals like speed signals. With amplitudes of Min and Max 5 and 12 V. The beach is 10 Hz to 800 Hz. The output impedance should be 100 ohms and should be rising 800 Hz soft switchable scan @ 7% per second.

I configured the sliders for the amplitudes of the 5 - 12V, as well as for the frequency range. The wave freezes when the frequency is close to 800 Hz. I configured the sample to 8000Hz rate that is 10 times of 800 Hz still no appropriate waveform.

I also hurt in soft switchable scanning configuration and the impedance.

Help, please.

Thank you.

Thank you very much Dan_K.

I love your sinusoidal signal generation method. I would watch the impedance and frequency again sweep. You have been very helpful and informative.

Why windows Media Center makes me think "Service is unavailable" when I have a signal strong?

I just installed a simple diamond ATI TV Wonder HD 750 PCIE hybrid tuner, using the most recent drivers from the Web of AMD/ATI site. WMC recognizes the tuner and the signal, but cannot view the video or audio from them and does not provide any explanation as to why. What is going on? Can someone help me? I appreciate your help.

Win7 64-bit SP1; Radeon 4850 PCIE 512 MB, Catalyst 11.2, stream AV 6.14.10.394
Screenshots:
Hello, czenisek

Unfortunately, the ATI tuners have experienced on Windows 7 compatibility problems and are not supported.

BlackBerry Smartphones have always signal SOS

guys someone can help me here on my phone, don't have signal all the time I was SOS and also insert sim card, can anyone give some advice?

Is this a new sim card? It is damaged in some way?

I want to put a Flight Simulator (have disk) in ms - dos.the program requires it.how do about it.

the program is: 747-400 precision Simulator.

He put in ms - dos, not in windows.it requres should be put through the command.is fast as possible.and where would be the file on the computer.

If it is an earlier MS-DOS program, I doubt that he would run under Windows 7. It could, but I doubt it. You can run DOSBox (http://www.dosbox.com) and run it in an emulator. However, to access the command prompt (DOS prompt), you can open start, then type CMD and press ENTER. That will take you to the DOS command prompt. From there, you need to navigate to where the program is installed or install it from the disc.

No signal after you have unlocked the new iPhone 4S

Just got my brand new (sealed box) Vodafone 4S managed to unlock via iTunes, put my existing (of work) O2 Sim in and waited for 24 hours to see that I have NO signal. 3G (internet) and everything works fine but impossible to send or receive calls, messages, etc. Have tried every conceivable reset and restore anything will do. Were informed by O2 customer service that the issue is now with the phone... So, what the * is happening and how to fix this?

There is no such thing as a 'new' iPhone 4S. He was suspended for years.

If you think This is new, check the warranty here: https://www.apple.com/legal/warranty/?cid=acs:applesearch

If it is defective, have it replaced.

Exceeded the output signal analogue of sbRIO9636?

Hey people so I got my sbRIO9636 of the sbRIO assessment package.

I was wondering if it is possible to transmit a signal from smulated via the analog output of my FPGA.

Basically, I have 2 signals I want to simulate who go to the analog output of the FPGA in a multiplier amplifier (this is a physical IC).

However, whenever I try to transmit the signal simulated in my output analog I get an error because the signal is 2D for the analog output is just a fixed point. Is there a way to get around this?

Hi Butterwaffle,

As noted Nick exit FPGA is point by point - you can write a single AO to both sample.

This is probably a good place to start:

Tutorial: Generation of signals with CompactRIO

http://www.NI.com/white-paper/4783/en

Hope that helps!

generate the signal of decimal number

Hello

I have a program that calculate the heart rate from the ECG signal. I want to show the beats per minute on a graph with 60 s of the plot of the story.

Since the vi who calculate the heartbeat I get output the string with the number, only when the wave of the tip, then I convert it to a number and then I place the offset of a simulated DC signal.

(In the table below the beats per minute are always 60 because I'm simulating a sinusoidal signal with 1 Hz).

------>

It works fine, but I'd like to see not the summits but a continuous line from one point to another, such as interpolation.

in this case, it would have been a horizontal line to 60 BPM.

I thought to store the last value of the chain and keep it frozen until the next update of value.

Do you have suggestions on how to do it?

Concerning

Not clear what you get in the form of numbers, seems that you get too many zeros, and you get a decimal number or another 'dynamic '? value?

You pulse-rate information could be ~ 45 to > 180 values per minute!

You display the exact story of a minute? Maybe (keep the last ~ 300 values with timestamps and use an XY diagram) a graphic story can be configured to display

wait... Here's one way:

I fed a chart (with 256 points in history), with a waveform. the wfrm has only a single value in the array of values and a t0. The chart is configured to display the 60 sec. Seems to work

My simulation will display a min rate of ~ 45 BPM, but you can beat him

FPGA: the internal signals in ModelSim display

I have a piece of code written LabVIEW FPGA in that I am trying to simulate in ModelSim. I followed the instructions in this link, but the example is a simple incrementer with no internal signal (only the input and output).

I created a test bench and started the simulation, but the macro provided .do only adds the entries and exits to the wave window. ModelSIM lists pages and pages of processes and signals that can be added to the waveform window; all have names completely opaque. I found something called 'TheWindow', and then a subdirectory called "Thatcher" and added all these signals to the waveform window. The names are things like ResHolder00000000000001 and provide no information on where they came from.

I tried to assign labels to the sons of my LabVIEW diagram, but that did not help at all in creating useful names. I need to check the progress of States in my VI but can't find anything that seems like the appropriate signal. A lot of available under 'Thatcher' waveforms are waveforms static, uninitialized, or both. How can I assign names to internal signals so that the waveforms are actually intelligible?

On a side note, it is also a problem in the synthesizer. I'm used to using the synthesizer output to 'pre-debug"my code, but LabVIEW seems to ignore the process of inference any macro. I tried to put a SCTL with an incrementer and LabVIEW does not infer a counter. I have never seen one of my machines of State recognized in the synthesizer, even if the code works correctly.

Using ModelSim PE 10.3, I understand is not "officially supported", but the fact that the synthesizer and the Simulator have the same denomination made problem wants me eliminate this as a problem. I do not use one of the PE extensions on the version SE.

Hi Nick,

If it is not the most readable, its not too hard to find signals that you are looking for. Your biggest help will be context-sensitive help in LabVIEW. If you hover over the structures, nodes, or son, in your LabVIEW FPGA design, at the bottom of the help context window, you'll see what we call the 'name of the VHDL Instance".

Once you navigate through the hierarchy down through the window, in the VI, you should start to see some of your top-level objects, such as while loops etc. From there, you can navigate down in whatever the level and find the wire you are looking for.

I did not have the ModelSIM on my machine, but it works for the ISIM. I wish they had a search function, so you can just type in the signal you are looking for.

LabVIEW basics - Cahnging Boolean State question based on the input signal

Hi all

I would like the State to change the Boolean indicator based on a simulated sine wave signal. I have partially managed to do this but need help to develop it.

See the attached vi. At the present time changes Boolean false to true when the value of the signal is greater than 8 or lower than-8.

The focus I need is:

Once the signal passes more than 8 (and the Boolean value becomes true), I hope it becomes false again to a value of 9, but only after the peak value was passed or when the signal is down.

Similarly on the negative side of the graph, I want the Boolean value to become reality at 8-under, stay true until after the peak value was passed and then back to false when the value is greater than-9.

Any suggeastions?

Thank you

While Crossrulz responded, I had a little look.

Don't let me spoil your pleasure with the VI attached. Have a go yourself.

Arbitrary signals output rate

Hello, I'm trying this arbitrary signal by arbitrary simulation of output signals express VI. I want an exit point out analog of the DAQ USB 6281 every second. When I said to output a point by iteration I get error 200609 say the selected buffer size is too small (selected the size of the buffer: 1, minimum buffer size: 2) how can I change the buffer size? attached if my VI, just go under the 1 'arbitrary' case and you'll see my VI Express with points iv series.

But you are passing an array many points so you should have to index this table point by point by putting the DAQ Assistant, in a loop with a delay of 1 sec. You can also spend the whole wave and specify a frequency of 1 Hz in the DAQ Assistant.

8900 Simulator have no Signal.

Similar Questions

Maybe you are looking for