9.3.4 and message about the iOS

Similar Questions

• pixel shader - get an error message about the 2.0 pixel shader

  Why do I get an error message about the 2.0 pixel shader and how can I solve this problem

  This indicates that your video card is not capable of using pixel shader 2.0 technology.
  Check that your video card is compatible with the minimum requirements of the game or software you use.

• Had sent the message about the Blue error screen. Has been asked for more details. I hope this helps.

  Had sent the message about the Blue error screen.

  Has been asked for more details.

  I hope this helps.

  BCCode: 10000050 BCP1: FFFDF6F4 BCP2: 00000001

  BCP3: BF90DB41 BCP4: 00000000

  OSVer: 5_1_2600 SP: 3_0 product: 768_1

  Hi VASANTHFERNANDES,

  ·         You did changes to the computer before the show?

  ·         When exactly you receive the blue screen error?

  ·         What is the full error message?

  Follow these methods.

  Method 1: Disconnect all external devices and check if the problem persists.

  Method 2: Start the computer in last known good configuration and check.

  How to start your computer by using last good known Windows XP Configuration

  http://support.Microsoft.com/kb/307852

  Method 3: Follow these steps:

  Step 1: Start the computer in safe mode and check if the problem persists.

  A description of the options to start in Windows XP Mode

  http://support.Microsoft.com/kb/315222

  Step 2: If the problem does not still in safe mode, perform a clean boot to see if there is a software conflict as the clean boot helps eliminate software conflicts.

  How to configure Windows XP to start in a "clean boot" State

  http://support.Microsoft.com/kb/310353

  Note: After completing the steps in the clean boot troubleshooting, follow the section How to configure Windows to use a Normal startup state of the link to return the computer to a Normal startupmode.

  After the clean boot used to resolve the problem, you can follow these steps to configure Windows XP to start normally.

  (a) click Start, run.

  (b) type msconfigand click OK.

  (c) the System Configuration Utility dialog box appears.

  (d) click the general tab, click Normal startup - load all services and device drivers and then click OK.

  (e) when you are prompted, click on restart to restart the computer.

  Method 4: Follow the steps in the article to check the drive for errors.

  How to perform disk error checking in Windows XP

  http://support.Microsoft.com/kb/315265

  Note: If bad sectors are found in the hard drive, then it could try to fix this particular sector. If you have any data on that, it can get lost.

  For reference:

  Demystifying the 'Blue Screen of Death'

  http://TechNet.Microsoft.com/en-us/library/cc750081.aspx

• Get the error message about the file cCNColms.dll missing at startup.

  I get the missing file from cCNColms to C:\windows\when dll I start and after connection as I administer. Can't find any help on the internet. I did a fixboot and have done several analyses. A fixmbr command showed that corruption but a fix can damage the disk partitions. Anyone have any suggestions? Thank you

  Using a Google search, I do not met that DLL and it has a special name, and is in the c:\windows folder so it sounds suspicious to me.  I would say that your system is perhaps currently or has been infected by malware.

  Because the MS Answers forum asks you to zero information on your system when a new question is asked, we know absolutely nothing about your system - and I would skip trying things.

  Read these instructions carefully and see what you can find:

  It is sometimes easy to get rid of the error message by doing something like disable the startup item in msconfig (if you can still find), but I suggest you fix the problem and difficulty not only the symptom of the problem by simply deleting the startup message.

  I would also not recommend you start digging in the registry to try to find the startup item and remove it unless you have a backup of your system or at least a backup of your registry, because there is no 'Cancel' or 'quit without saving changes' option in regedit.  If you make a mistake, that's all.

  These ideas relieve 'rapid' and sometimes risky of the symptom if they not even work at all, but they can't actually solve the problem.  Also, I'd be suspicious of ideas that begin with the words "try."  You don't need to try things, you need to fix things.  You don't need to try ideas that might work, you must do something that will always work all the time.

  Here are the detailed instructions that protect you and solve your problem in the 'right' way.

  There is very little. DLL files that should be loaded from the C:\WINDOWS folder and is not one of them.
  A "Cannot find...". ', ' Failed to start..., "Could not load..." ». "Might not work... "" Cannot run ""error loading... ". "or"specific module could not be found"message at startup is usually related to the malware that has been configured to run at startup, but the referenced file has been removed after a malware scan, leaving behind him a startup item or the registry entry pointing to a file that does not exist.
  It might be a removal of malicious software or an application not installed.  The entry may have a curious looking name since it was probably generated at random when the malware was installed. If you search your system for the referenced file, you may not find.
  Windows attempts to load this file but cannot locate because the file has been deleted for most probably during an analysis of the malware. However, an orphaned associate of remainders of startup parameter or registry entry and tells Windows to load the file when you start or connection.
  So you should delete the referenced entry Windows stop trying to load or run the file. It may or may not be included in the registry, but you can find it.  Autoruns (see below) you get the elements no matter where it is.
  If you just locate and uncheck the item in msconfig, which disables the element but does not remove the reference to the element of false starting your computer.   The msconfig program is not a Startup Manager, that's a troubleshooting tool.  Disabling things in msconfig to put an end to the messages and think that your problem is solved is short-sighted and leave behind him a sloppy XP configuration.  Just disable the display of a start-up error message should not count as a 'solution' to the problem.
  If you are comfortable editing the registry, you can find and remove the reference directly from there or remove it using a popular third-party tool called Autoruns.  The problem can always be found in the registry well.
  Before making any changes to your registry by hand or with third-party tools, don't forget to first make a backup of the registry. There is no cancellation or exit without saving the option in regedit.
  Here is a link to a popular registry backup tool:
  http://www.SnapFiles.com/get/ERUNT.html
  You can also use the Autoruns to find the element of start remains little matter where he's hiding
  .  Autoruns does not install anything on your computer.  It will display all startup locations where the reference may be then you can turn it off or remove it completely.  Here is the download link for Autoruns:
  http://TechNet.Microsoft.com/en-us/sysinternals/bb963902.aspx
  Run Autoruns.exe and wait that he at the end of the filling of the list of entries.
  When the Autoruns is finished scanning your system, it will say "Ready" in the lower left corner.  Autoruns can be a little intimidating to first if you have never seen it before because it displays a lot of information
  .  You are really interested only a few sections.
  The problem is usually to start the system or the user startup entries, then click the connection tab and see if the startup item is there.
  Scroll through the list and look for a boot entry associated files in the error message.
  If you can't find on the connection tab, look in any tab.
  You can also click file, search to search for logon, or any tab for all or part of the name of the element.
  Right-click on the offending entry and choose Remove.  If you are not sure what it is, you can simply disable, restart and if the problem is resolved and then remove the offending entry.  If you don't see it in Autoruns, you may edit the registry and remove the item from your startup folder it.  Autoruns shall display the same information however.
  Given that you had or have an infection, followed with this:
  Perform scans for malware, and then fix any problems:
  Download, install, update and do a full scan with these free malware detection programs:
  Malwarebytes (MMFA): http://malwarebytes.org/
  SUPERAntiSpyware: (SAS): http://www.superantispyware.com/
  They can be uninstalled later if you wish.
  Restart your computer and solve the outstanding issues.

• Message about the end of the questionnaire according to points scored

  Hello

  I would like to make a simple quiz - say, 0 to 20 points, with questions worth of points 1 and 2 and in the result I would have another message at the end of the quiz. For example, if I have a quiz on reptiles and someone scored 10 points I would like to let him know that he is just good and suggest a few books of snakes and so, and if he scored 18 points or more, I would like to inform him that he is an expert. This can be URL open instead of message, it's about differing from the end of the questionnaire... Could someone give me a tip? Do I have to use variables or so? I'm working on Adobe Captivate 5.0.

  I tried searching here on the forum and on Google but I don't know yet how to ask this question in a more simple way I have made juice

  Thank you in advance.

  Hello and welcome to the forum.

  This is possible by creating a tip action. I post some tutorials on Adobe Community Publishing, that might help you sort, although they are not exactly what you want to do. I'll post the links below.

  If you want to go this way, here's my first idea on the steps to follow:

  • I think you used the Question slides that came with the PC, the resulting partition will be stored in a system variable, marked cpQuizInfoPointsScored
  • Insert a blank slide before the 'official' Score slide where you will display custom feedback, I'll call him FeedbackSlide
  • On this FeedbackSlide create as many text captions with messages of comments that you need, but make it invisible at the start (disable Visible in the Panel properties, high region of the page). I'll call these Excellent, good, sufficient, failure for example TC
  • Create a tip action, you will need a conditional action, label it and create as many conditions as you need (in my example, I could do with 3 conditions). All the conditions will be checked together. I post 2 screenshots of the first and the second condition here (Excellent when > 40, good is is credited with between 30 and 40 points, I had a Quiz on 50pts). Good condition is similar to the Excellent, the State failed to Excellent.
  • Trigger this fast action at the entrance of the FeedbackSlide.

  Here are links to 2 of the most appropriate tutorials:

  Conclusion based on several partitions

  Question with partial scores slides and a return to measure

  

  

• Problem of Bluetooth connectivity with Oticon hearing aids and 10 of the IOS.

  I use the Oticon Streamer Pro 1.3 to connect my hearing aids to my iPhone 6 more via bluetooth.  With the IOS 10 update the streamer keep disconnection, reconnection and disconnect.  I tried forgetting the device and once again pairing with the iPhone.

  Hi, Dick

  I have similar problems with my hearing aids Starkey.  iOS 10 broke the bluetooth.  I've been working with Apple, he's broken, no solution until the next update.  Incidentally 10.0.2 is not the solution

• We need notifications for email and messages on the desktop

  Hello

  I just found out how to see the notifications, but I don't think they are convenient.

  Is it possible to receive notifications on the Destkop? It would be nice to have a counter of unread for example emails and a message counter.

  Thank you all for Firefox OS! I love this OS.

  Best wishes

  Hol

  Hi joseph.vidal.rosset,
  I'm glad to hear you like Firefox OS! I understand that you want to move the desktop notifications. Currently, there is no option to customize notifications.

  I don't know if there's an app on the market that do that, but you can change all notifications to not appear on the home screen of the setting menu by pressing the Notification. In order to change notifications for new e-mail, tap e-mail account on the three bars on the left menu, click on the gear and then click the name of the account. From there on, there will be an option to disable the new e-mail notifications.

  If you have any other questions on how to use Firefox OS, we are happy to help you.

• How can I eliminate frequent Explorer script error notification and message of the Web page advising the same error on the screen?

  I use Explorer XP and I have version 8 of belief. I constantly receive the same opinion on many different sites, thet being in the opinion of the Script Explorer error with a Web page message saying that an error has occurred in this view, error 53, permission denied. I don't know why or what it means, or how to remove it. I click OK and continue what I'm doing.

  Hi jerryschroer,

  Did you do any hardware changes or software on your computer before this problem?

  You can follow this link completely and check if the problem persists:

  How to fix script errors in Internet Explorer on Windows computers?

  Hope the helps of information.

• To remove the error message about the network drive

  I have W7 Home and recently restructured.   I had this problem of reformatting finally a long time ago and it is solved but do not remember how.  Whenever I boot, I get the message "connection impossible network drives.  When I click it, I see the Epson printer has a red X on it and says Epson memory card.  The printer has always shown in my computer, but it works very well.  All I need is to get rid of the error message.  I tried to go into the center of the Action and unclicking on error messages of network firewall but that did not help. I'll print on any solution this time for the next restructuring!  Thanks for any advice.

  Epson support says that since the printer connecting wireless much later that opens Windows, Windows is not see when it starts.  They say that it is a Windows problem, not them.

  To get rid of the error message, I disconnect a right-click on my computer and clicked on the network drive.  I find the error message disappeared and the printer works fine.  I don't know if there's a problem with that.

• Photoshop CC - Error Message about the graphics card

  Hi, I am a user of cloud creative and recently downloaded the new CC in Photoshop. I tried to open an existing file and got the following error message

  "3D features require a minimum of 512 MB of vRAM. Photoshop has detected less than on your system. Update your graphics card driver may solve the problem. »

  While I am fairly proficient in Photoshop, I have to admit that I am a bit lost when it comes to my computer. Can someone help me understand if I really need a new graphics card or maybe my settings are wrong?

  Here is some information on my computer:

  Mac Pro

  Processor 2 x 2.8 GHz Quad - Core Intel Xeon

  Memory 20 GB 667 MHz DDR2 FB-DIMM

  Graphics  ATI Radeon HD 2600 XT 256 MB

  Software  Mac OS X Lion 10.7.5 (11G63b)

  I thank in advance for any advice/help, you can offer.

  According to the technical specifications of Photoshop CC you require 512 MB of vRAM installed graphics driver.

  Tech specification Photoshop CC:

  http://www.Adobe.com/in/products/Photoshop/tech-specs.html

  Graphics ATI Radeon HD 2600 XT 256 MB

  The card installed on the computer have only 256 MB of vRAM.

  Photshop gives you hereby warning to solve.

• Suggestions and Questions about the upgrade my Hardrive Mac and Ram.

  Hi This is my first time asking something in the forums. (At least I think) Well anyway, I got the Macbook Pro Mid 2012 13 "with the retina also runs the OS El captain. I do computer for school and sometimes animation video editing and ive noticed some performance as my projects get bigger and bigger issues. I want to improve my mac, but I'm not very tech savy and don't want to do something useless, so I had a few questions, I wanted to ask you.

  Do I need for my hard drive and my Ram?

  What effect will the upgrade of my Ram and what effect will be upgrading my hard drive with an SSD?

  I saw this SSD online and thought of novice opion that sounds get Id more bang for my buck (link) with her. Is this good? What more to kill? WiIll it still works? Could you suggest some other good affordable options?

  My next question if I decide to upgrade my Ram can provide you with some good affordable links to buy of new RAM sticks, is also 8 GB, the best he can do?

  My next question I watched a few videos online and by installing the updates level looks really easy and fast. But I use bootcamp (to play games sometimes), and I wanted to know if I save my files on my drive as ive seen people do videos, (something to wipe the drive and put it back in after installing updates) will be I lose my windows 7, I lost the disc to reinstall and he check so I really want to buy a new also do not want to lose the things I put in memory.

  From the retina MacBooks you is impossible to pass the ram as it is soldered to the logic board. As with the hard drive, it's just a card ssd and you can't get those anywhere because their hard to find.

• Error7 message about the signature unidentified, the upgrade and installation of iTunes 10.5 for Windows Vista.

  Original title: error upgrading and installation of iTunes 10.5 for Windows 6.

  I tried all kinds of ways to solve this problem, but I can't seem to find a solution. This all started when I tried to update my iTunes to version 10.5. Then came the error message 7 on unidentified signature etc. I could not even run my iTunes more then. I started download iTunes again to repair and it just doesn't work. I don't have problems with the installation of my iTunes for the first time a year ago and upgraded whenever I allow it.

  All other methods I tried to correct the error includes:
  • Uninstall iTunes completely and everything that it supports the programs and files (Quicktime, supporter of Mobile, Hello, Safari etc.)
  • Download Quicktime separately after you have uninstalled it as suggested by other users in some forum.
  • Update the frame Microsot.NET as suggested by the Apple Support site.

  • Manually started the installation of such Windows program suggested by one of the answers on this site:

    a. click the Start button, and then type services.msc in the start search box and press ENTER.
    b. Locate the Windows Installer service.
    c. check that the status is started. If the condition column is empty,
    d. right-click on Windows Installer, and then select start.
    e. If you get error trying to force start the Windows Installer service, then try to change the Startup Type to automatic.
    f. restart the computer.

    I have tried for at least 10 times and I have not yet set and am frustrated. Would be really grateful a solution to this soon.

    Windows Version: Windows Vista Home Premium - Version 6.0 (build 6002: Servie Pack 2).

    Thank you.

  Hi Junetyl,

  What is the complete error message you get?

  Method 1:

  You can see the article next to the Apple support and check if it helps.

  Remove and reinstall iTunes, QuickTime, and other software components for Windows Vista or Windows 7

  You can also consult the following article:

  iTunes for Windows: "Error 7" message when you open iTunes

  You can also try the following steps and check.

  Method 2:

  You can run scanning of the file system [SFC] checker on the computer that will replace missing or corrupt files & check if the problem persists.

  For more information, you can consult the following link.

  How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7

  Method 3:

  You can also perform a clean boot and check if you can install iTunes.

  A clean boot to check if startup item or services to third-party application is causing this issue.

  You can read the following article to put the computer in a clean boot:

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  After the troubleshooting steps, please refer to clean the boot link to put the computer to normal startup mode.

  You can also get in touch with Apple using Arthur support.

  Apple iTunes Support

  Hope this information is useful.

• Why would I get a message about the file to be encrypted, and you want to copy this folder without encryption? I am sewing embroidery, and most of the files are zipped.

  When you receive a design on the web they are usually compressed so you must check out the drawings. I just took this message to a site that offers a free drawing package. I can't extract. what I need to change the folder options > I had problems with this computer using my embroidery machine. My husband has a dell also and did the same thing on his... Windows 7 would be the problem? Never had any problems using my embroidery machine, until I'm a Chantal with windows 7...

  Hi KayGoodrow,

  Thanks for the reply.

  We can refer to this article and check if that helps.

  Compress and uncompress files (zip files): http://windows.microsoft.com/en-US/windows7/Compress-and-uncompress-files-zip-files

  Thank you.

• Error message about the folder drafts ("mailbox does not exist")

  Hi, after having added a third account to my office of Thunderbird, I receive the Error Message after 30 seconds or more:
  "the current operation on the drafts did not. "the e-mail server for account [email protected] replied: there is no mailbox.
  Can anyone help solve this? Sending and receiving mail seem to work perfectly.
  Thank you very much
  Eli

  The current path to store such projects as configured in Thunderbird may not correspond to your IMAP server folders.

  Check first if you subscribe or if the folder exists on the server, then check if it is correctly configured in your account settings, as shown in the attached two screenshots.

• Satellite C660-21Z - System Message about the error with cooling system

  I've had my laptop for 11 months now, and in the last days a system message was appearing on my screen saying there is a problem with the cooling system and that I should turn off the laptop and return it for service. I'm not sure if it a message genuine system or if it is in fact spam.

  The answers would be grateful to you

  Hello

  I have read on this message and looks like it s a software bug
  Have you noticed any problems with the cooling system? I mean something like a higher temperature or unexpected shutdown from the bottom?
  If not then it's a bad alarm
  You can ignore this message and I read that after new system recovery the message did not appear again.