a bad impression

Similar Questions

• HP deskjet f4180: hp deskjet f4180 windows 10 problem - bad impression

  Hi, my f4180 pritner works well with win 8.1. But I could not find win10 driver for my printer. And with windows 10 very bad impression.

  Earn 8.1

  http://i.imgur.com/Nsy2Bfv.jpg

  

  win 10

  http://i.imgur.com/K0bNIhH.jpg

  

  Because of this I went back to win 8.1. When win10 pilot going out for my printer.

  Edit: I think that the image does not appear. I've added the link direct imgur.

  I solved the problem for now. I installed virtual windows 7 with virtualbox on windows 10. I use virtual win7 when I use pritner. Thanks for your help. Kind regards.

• PS and LR produce bad impressions, but other programs are not...

  It's a little long, because I did a bit of investigation, but I can't solve my problem and I need help:

  I had a nice workflow that I have used for years.  I'm sure that many of you would find a bit tedious and I will not go into the details of it, but the important part is that I always printed on Photoshop (Extended CS6 - now at 13.0.3 - Yes, I have the window trial stupid bug, but that's another matter).  My monitors are profiled (no printer profile custom, but I have downloaded profiles suitable PixelGenius for times where I need them, and with my management of colors, my impressions were quite specific.)  I use and Epson Stylus Photo R2880 and I was very happy with it.  I work mainly on an iMac 24 "(millésime 2009)."  Recently, I decided to change my work flow based entirely on some of the tutorial videos that I bought of LL.  I decided that I was ready to integrate much more LR in the workflow, especially now that he understands the proofing.  Due to the new workflow I was really looking forward to printing off LR.  Who should you get more or less current.

  So far, I haven't printed with my new workflow and I would say that I haven't printed anything since 13.0.1 on PS and LR 4.1 (not that I was printing from LR at the time).  Having not printed in a while, I knew that I needed a head cleaning (of course I did) and, as is my habit, once the head was clean, I printed (from LR) a 4 x 6 image I had planned on printing to a larger size.  It collects all persistent grime after a cleaning.  Printing doesn't look just right for me (too dark and the colors were a bit wide).  I met with wrong colors prints once before, and it turned to be a driver problem.  In the process, I found a large image that is indicative of a certain type of problem and I keep the good and bad prints of hand... just in case.  I decided to print this picture, and of course, it came out looking like the standard version craptastic I was getting into with the bad long time driver.  Just to check that it had to do with my new process, I printed the picture of the PS (which worked fine the last time I printed this image). Also, it came out all wrong (the same as LR all wrong).  Since the bad impressions looked like the old 'bad driver' impressions, I thought I knew what was going on and worked with Epson to reset my printing pipeline and reinstall my printers (I also have a workforce of 845 for printing "throw" and for my wife to use).

  With new installs for my printers in place I went ahead and printed again... and once again, it came to pass badly.  I was, to say the least, discouraged.  As a last test of consistency, I loaded the image up in Nikon Capture NX2 (version 2.3.1) and did a print using the same color profile.  All of a sudden feel perfect.  It is my 'good' old prints and, equally important, was a Dead Ringer for the image on the screen. At this point, I guess that for some reason any LR and PS not correctly color managed.  I thought they were ignoring my selection of color profile and let the printer manage printing from the native color space (ProPhoto RGB) or.  To test this, I set up printing in PS (same image), but took a very strange color profile (Nikon DBase for v3.0.0.3002 of the NAVE).  It's odd how radically a color profile that I could find (the colors are mapped to completely different areas).  I was hoping that printing would be unchanged, but unfortunately he is out with the weird mapping that provides this profile.  It is so drastic a change, I have a hard time assessing whether it is 'off', as the other impressions are.  What is apparent is that PS at least (I have not tried in LR), it's actually reproducing along the pipeline of printing color information.  This does not explain why LR and PS of 'bad' impressions but not Nikon Capture.  This is where I am.  Apparently the color management is broken in my Adobe products, but works very well in my Nikon software.  I'm a bit of a loss. I'm sure I'm printing off LR and especially PS, correctly to 99.999999999%.  Anyone have any ideas?  I'd like to be able to print again. Impression of Capture NX2 is really not a good option.

  Thanks in advance,

  David

  Just to close it entirely, I just got the phone with Epson and they confirmed that if you have PS or LR color management, EVERYTHING must disengage in the printer including the option of 16-bit driver.  You will always get 16-bit printing via the PS color management.  Apparently the option "Off (no correction color)" and the 16-bit box operate independently of the driver and if one is on there as a conflict with a managed utility printing color.  I just wanted that along.

  Thanks again for all the help,

  Dave

• Bad impression on P2055dn

  Hello. Use a Laserjet P2055dn for about 3 years. Recently, there was a sense of 'dirty', ghosts of impressions on the sides (more so on the right side than on the left). If it's just plain text, printing is not as bad. To make sure, we introduced a new toner cartridge and it does not help. We also run the cleanup utility. The book comes after several tests. But at the time wherever we print a real job, he's back to sale on the sides. Other part, which is not replaced with the cartridge, would affect the print? Thank you for your tip or help.

  Hi bernie_at_H,

  I'm sorry, but to get your question more exposure, I suggest posting in the trade forums, since it is a commercial product. You can do so at http://h30499.www3.hp.com/hpeb/

  I hope this helps.

• bad impressions

  My photos look great in lightroom and on the screen after the export. But they look bad when printed. They get shadows and shades of red. I changed to sgrb and always the same. Any suggestions ? The left photo is a scan of the print (scan seems a bit worse than the actual print), the picture on the right is the original edition. If printing analysis seems worse on my computer that the real impression looks like in person, maybe it's my monitor? It's a new backlit hp one and I tried calibration it but it's all in my head...

  I do not use target, Walgreens, etc..  So, I can't be sure. I read where Costco users are including on the deactivation of the Costco color management if they made their own color management in Lightroom.

  Maybe you can post your workflow steps?  What exactly are your export and send to the target?  Do you work with to start?  RAW?  JPEG?

• HP 1022: the bad impression Hp 1022

  Hi my print have some problems, I see a white line and I don't know if the toner is fine or just dirty.

  How can I clean my impression?

  Can Hon I know what is the problem?

  Add an image of boredom.

  

  Hi @nikned ,

  I read your post and see that you have found a white line on the right side of the page. Thank you very much to the point of attachment. I'd love to help you.

  The toner may be low, causing this problem. Remove the toner and swinging gently back and forth, toner about five times to redistribute the toner. Be sure not to do any toner on yourself.

  Please, try the procedure described in this document to see if it will solve this problem. If you have the full software feature installed for the printer, you should have the options for cleaning running and control of the toner level.

  Solving print quality problems.

  You use Genuine HP Toner?
  What are the levels of toner?

  If there is anything else I can help you, let me know.

  Good day!
  Thank you.

• OfficeJet 7610 large Format: The bad impression

  My printer only prints part of the page.  Always cut the lower part of the PDF it is printing even if she shows in the preview window.

  If you are still having the same problem trying to print the Microsoft Edge program.

• 3050 j610a all in a bad impression, cannot find & quot; own & quot; menu

  Hello

  My 3050 j610a but often prints smudge or leaving negative horizontal lines (IE not totally printing letters). Before I try new ink carts, I want to 'clean up' carts. The manual line gives the foloowing tips, but I can't find the way to 'Actions of printer' or later.  I tried to uninstall and reinstall the program, but still no maintenance option.

  Any other here fell on this kind of problem and has an answer?

  See you soon,.

  Sparx

  You can try to use the print and scan of doctor utility to run the routine cleaning of cartridge. Download the utility by following the steps in the document below:

  http://support.HP.com/us-en/document/c03286146

  1. After downloading the utility, double-click the file to run it. In the product in the utility column, select your printer. Click Next.

  2. now click on the "Printer" menu option on the upper left side of the window. Select printer Services.
  3. now click the 'clean ink cartridges.

  I hope this helps.

• Bad impression of colors with Officejet 6700 Premium (networking)

  My OS is Windows 7 with all updates in place.  The printer is about 2 years old and, so far, gave good served the printer comes to download an update, but I don't know if my problem is due to this update or something.  I had recently installed a new cyan cartridge.

  I printed a picture which contained a lot of blue sky, clouds and a few dark green landscape.  Printing which gave me a very pink sky without the slightest trace of blue.  The landscape was very dark and could include some green but I can't say for sure.  A picture of a yellow yellow finch missed and the blue sky was swept away.  The printer indicates that the blue and yellow cartridges were low so I replaced to ensure that there is wrescie of ink to create my sky.  I printed the pages to test several times.  Four color "chips" appeared as follows: (1) bluish-purple, (2) rose, (3) orange and (4) completely black, but the lighter shades of black were more purple than the gray.  In summary, it seems that I do very little green or yellow to make ink.

  I worked my way through the help desk services, aligned and cleaned the heads a couple of times and checked for updates of pilot with no significant improvement.  Convenience stores to say there is no problem and I am running out of ideas.

  Bob

  With apologies to all, I have solved my problem.  Looking at another forum I found out that the 'heads' are not part of the cartridge (I think they were once).  After you put new cartridges in I assumed that a standard cleaning pass would be the point.  Another reading (or smarter reading) manual convinced me to try to clean again.  This time, the first "chip" color is much bluer than previously and the fourth "chip" was brownish instead of purple.  I ran the second head cleaning level and first bullet showed shades of blue and shades showed fourth green.  A test print of a landscape photo came out with a beautiful blue sky and greenery in the foreground.  So all is well with the universe once more.

• Bad impression on HP Deskjet F300 series

  Hello
  Can someone there help me solve my problem?
  When I run a Portrait print no problem but as soon as it's in landscape, there are parts where it printed shifted/duplicate see plu... Suddenly, it becomes bold. Comment do pour solve this concern for printing?
  In addition, Lle seeing orange for my printer keeps flashing even though I refilled my ink cartridges.
  Thank you pour your advice!

  MANALINTSOA

  Please select your language from the drop-down menu at the bottom of the page to post your question in the language of your choice.
  The Forum in which you've posted is for English only.
  If you can't find the desired language, support for additional international sites options are by following the link below:
  

  Hello

  Please get your language in the drop-down list above pour post your question in the language of your choice. The forum you posted is in English only. If you can't find the language of your choice above, options of fees to pay to other international destinations can be found by following the link below:

  Thank you
  
  http://support.Microsoft.com/common/international.aspx

• Equium A100-306 have bluetooth and how do I get the mic to work?

  Hi there, please forgive stupidity but I'm new in the world of technology. Have tried to activate bluetooth for accept my mobile, but nothing helps... begins to think he had a bad impression on the box! Please help, this model has and how to operate... 2nd question...

  I need an external microphone? In-House said we could work when calls however, no one can hear me and I tried to change the settings, to be honest have no idea what I'm doing? Help me please someone... Thank you Eva *.

  I can confirm that. The laptop does not support the BT module and does not support the internal mic. If you want to use the microphone, you should use an external one. You can connect it to the external microphone jack. All that s.

  But what exactly do you do? You want to transfer images from mobile phone to laptop?
  In this case, you can use a USB cable which has been specifically designed for mobile phones to connect to the laptop or desktop PC

• OfficeJet 6815 e All in One: 6815 Officejet print low quality on pc and high quality on devices

  Purchased a new HP Officejet 8615 e All in One and finally got it working after hours of shyte with unistalls and reinstalls. Now it works, but it prints documents with best quality of my laptop, iphone, ipad, and acer. From the pc, it prints out horribly. Downloaded a software/driver full features and always bad impressions from the pc.

  He is currently connected wireless. The printer test pages are all of good quality, all in colour. Scan doc says it all is green and works correctly.

  Obviously, there is something missing on my pc...

  Any ideas would be useful.

  THX

  Thanks for providing this information @MikeG7.

  Yes, it sounds like a driver problem. You should have a lot more options at your disposal.

  I checked online and the only available drivers are the base drivers. I suggest you update this driver to see if you have additional features that are available for the Windows XP computer.

  In the windows printers and faxes, right-click the printer and then click printer properties.

  Click the Advanced tab.

  Click new driver.

  Next.

  Select the HP Deskjet 990c printer, then continue the wizard.

  Apply the settings.

  Check the print settings and try them and print them out to see if the quality is improved.

  Keep me posted! Thank you!

• All-in-one HP Deskjet 2542: 2542 all-in-one - large Print - low ink

  Hello

  So I have a large print job (25 pages all black color) and the estimator of ink indicates 1/4 of the remaining black ink and ink color 1/3 remaining.

  I want to AVOID pages that are stained, streaked or faded.

  Should I go get a black cartridge HP-61 and install it for this work (, I anticipate printer will be want to print a test page and others and confused when I put the full cartridge 1/4 in),

  or,

  should I just give it a try.

  Kind regards

  RunningWolf

  Hi @RunningWolf,

  I see that you would like to know if you have enough ink to print a 25 page work. I would like to help you today.

  I suggest to print 5 pages at a time, the application when you go to print you can select pages to print at the same time. Then make the next set of 5 and so on. In this way, you don't end up with a bad impression. You can try the full 25-page document and if the pages are faded, then you can always go back and simply print these specific pages.

  

  Hope that helps. If you appreciate my efforts, please click on the "Thumbs up" button below. Thank you.

• Is alcohol the best solution for the cleaning of the product

  Sometimes you print quality problems. You cannot print the colors, bad impression or bad imagingin during the scan images.

  You go through all the troubleshooting steps away as cartrides, glass, rollers of the printer cleaning and replacement of cartridges.

  Ask yourself what you should used during the cleaning of the unit?

  WATER and a LINT cloth, would be the best solution for cleaning. You can absorb the water on the cloth and clean the printhead, cartridges, the scanner glass, rolls and any other area that needs to be specific to the unit.

  ALCOHOL IS NOT AN OPTION. This can damage the strips and the contacts on the cartridges and the print head. The next time you need to clean your product, water is the best option.

  Hope this helps everyone.

• Cannot print on photo paper

  I have a HP 7510 all-in-one printer running Windows 7 64 bit.  I ran all the diagnostic tests offered by HP.  Recently, when I try to print photos or graphics and then select Photo paper or paper of presentation I get a very bad impression - color is faded and is not clear.  If I select plain paper it works fine however I don't think I get a picture quality which is what I use the printer for most.  In other words I can't print in the 'better' quality.   I updated the driver, clean the heads, etc.  All of the suggestions.  I bought the printer last summer so its not yet old.

  Hi 11lady,

  Be sure and check the ink levels and replace any weak inks.  It is also important to select photo paper on your computer which is as close as possible to your real photo paper. The quality of the printed photo can also be strongly affected by the quality of photo paper.  Differences in paper can make a big difference.   You could experiment with different settings and verify their results.

  I'm linking you to a document to print quality troubleshooting.  Take a peek and try the steps you see that you did not.  Let me know how it goes.  Click here

  Good luck!