A connection VPN Question

Dear,

I have configured anyconnect on my asa and it works fine, but I can't manage the ASA it free VPN, all ideas session

Hazem

It is possible with the help of the command "access management". Please refer to the following documentation: -.

http://www.Cisco.com/c/en/us/TD/docs/security/ASA/asa82/configuration/guide/config/access_management.html#wp1064497

Make sure you have good split tunnel and free of nat-access list for traffic destined for the interface of the ASA.

Kind regards
Dinesh Moudgil

PS Please rate helpful messages.

Tags: Cisco Security

Similar Questions

A connection VPN (PPTP), who worked previously no longer works.

original title: VPN works not

PROBLEM:

I'm running Vista 64 Ultimate SP2, with all Microsoft Updates applied. My original CD is pre - SP1.
A connection VPN (PPTP), who worked previously no longer works.
I think that the problem is related to an installation of Virtual PC or iTunes, but I can't confirm either way.
Unfortuantely, I do not have a restore point dated to before the problem.

DETAILS OF THE PROBLEM:

When I'm viewing the network drivers in Device Manager, the following drivers displayed an error:

Miniport Wan (IP)
Miniport Wan WAN (IPv6)
Miniport Wan (Network Monitor)
Miniport WAN (PPPOE)
Miniport Wan WAN (PPTP)

The error for each text is: "Windows cannot load the driver for this hardware device. The driver may be corrupted or missing. (Code 39) »

The following drivers do NOT display an error:

Miniport Wan WAN (L2TP)
Miniport WAN (SSTP)

SOLUTIONS ALREADY ATTEMPTED:

Uninstalling Virtual PC has not solved the problem.
Uninstall device drivers and re - install it as described in the following web pages did not help the problem:

http://www.chicagotech.NET/NetForums/viewtopic.php?p=988&SID=39aeb8e5e43c459
http://www.howtonetworking.com/Vista/rebuildminiport.htm
http://www.experts-exchange.com/software/System_Utilities/Remote_Access/VPN/Q_24291900.html

In general, I am able to uninstall device drivers, but re-plant fails (sometimes reported as successful, sometimes not).

I have presented a problem report on the failure of resettlement of Microsoft (including the following in the log files), but have received no solution:

DMIC8E.tmp.log.XML
LOGC9F.tmp
netrasa.inf
Setupapi.app.log
Setupapi.dev.log

I noticed that the device (loser) of WAN Miniport (PPTP) lists two files: 'ndistapi.sys' and "raspptp.sys", of which the first is NOT digitally signed, but the second is. However, the peripheral Miniport WAN (L2TP) (work) lists only one file: "rasl2tp.sys" which is signed digitally. This brings me to the question if my netrasa.inf installation file is currupted. (?)

Any help would be greatly appreciated. I am technically competent and can deal with editing the registry, etc, but need a plan of attack.

Thank you!

-Tad Richard

Hi Tadrichard,

Thanks for choosing Microsoft answers Forum.

Is there an error when they try to establish the connection, if so, what is the error?

Are there errors in the event logs?

Forward for you help.
Kind regards
Support of yama - Microsoft.

Any concerns of connection VPN security issue.

Hi guys,.

I set up a VPN on Cisco ASA & our mobility users are able to connect VPN successfully and access my LAN environment but our senior management says there provide less security & any hacker can hack easily.

Someone can help me on this point, how can provide more security in Anyconnect VPN, I think on the Anyconnect host control features, but I think it works only with the secure desktop.

Kind regards

Nafis Ashique

In short, you have just a few steps:
1. enroll the certificate root of your PKI to customers and to the ASA (if not already done).
2. enroll certificates from the client to the customers. It will be easier if they are in the user store. As far as I know, you cannot use the certificates stored in the IPsec VPN client store.
3. reconfigure the ASA to use certificate authentication
In a little more detail found in this document.

[Issue] The connected VPN SX20, that I need more?

Hello. I'm number one special facfing which I have never seen elsewhere.

Please, see this photo belowed.

We use the H323 Protocol with mode of ISDN G/W 3241 interal Gatekeeper to call leave SX20 to other SX20.

You may feel weired because we do not use VCS, but instead of him, we use the internal ISDN G/W Gatekeeper.

ISDN to IP and IP to ISDN call works well. but on the connected VPN SX20(Building D) has some problem.

He has no problem on H323 mode "live". but, once it changed to H323 mode "keeper."

It seems to see on ISDN G/w registed.

but when we begin to call, building D SX20 is keeping just "Composition" State and never step of 'connection '.

The only one I hear is unlimited ringtone SX20 building D, and the opposite of SX20 stopovers to

Building D SX20 call also gives the same result. "the composition of demonstration" but no signal has not reached side opponent.

This problem appeared on the VPN connection, so I need to check what I most when the value on the VPN connection for telepresence.

Dose anyone know about this issue?

If you want to use the feature GK, you use the gk mode.

The VPN has very probably some treatment of layer 3 for h323 or some ports are not open.

Behind the VPN endpoint and the rest of your ip based video systems must have

direct ip connectivity without NAT and required ports must be open.

And for h323, it's a whole lot of ports.

Especially if the public ip and uri dial connectivity is on the future roadmap I would inquire

using a vcs or cucm setup.

Cisco RV042 VPN hub and spokes, connecting spokes question

Hello

I have a few Cisco RV042 router and VPN links them with a hub and spoke topology.

Each speaks VPN works, they manage to connect to the platform.

The hub can see each VPN active rays.

A computer under the hub can connect to a computer in any talks.

A computer under any talks can connect to a computer running the hub.

Which works very well.

Now, what I really need, is to connect computers under a RADIUS to connect to computers under another spoke.

It don't work.

Current configuration of LAN:

HUB IP / mask: 192.168.0.1 / 255.255.255.0

Spoke1 IP / mask: 192.168.1.1 / 255.255.255.0

Spoke2 IP / mask: 192.168.2.1 / 255.255.255.0

I was wondering if the Cisco RV042 can be configured to allow that and HOW?

If we can not do, should what other router I use as a hub? Should I change the rays as well?

Thank you and have a nice day

Hope that this document can point you the right direction.

https://supportforums.Cisco.com/docs/doc-12534

VPN question, can connect, but can, t go anywhere

Hello

I have my house 2621xm router and I have configured my router as a vpn server and I can connect using vpn client, but that's all I can do. I can't ping or go anywhere. I can't find all the documents on cisco or google that can help me here, so here I am.

Basically, I give the client vpn ip 192.168.6.X then I want the customer to be able to go anywhere in the 192.168.1.X range 5.X and 10.X.

any help would be appreciated to greately!

Try,

crypto dynamic-map VTELDYNAMAP 10

market arriere-route

Kind regards

Prem

VPN question

Hi, I use the windows Server 2003 and. When I access my server at home I connect the VPN but I not have access to the shared private folder when I try to open the system crashes but the other file I can open without blocking. Please help me solve this problem...

Hi Patchamuthu,

Your question of Windows is more complex than what is generally answered in the Microsoft Answers forums. It is better suited for support on Windows server. Please post your question in the below link:http://social.technet.microsoft.com/Forums/en/itproxpsp/threads

With regard to:

Samhrutha G S - Microsoft technical support.

Visit our Microsoft answers feedback Forum and let us know what you think.

Connected VPN, no internet.

Hi, I'm a fan of cisco that manages a network using ASA 5505. We changeed IP addresses from our main location yesterday (changing ISP) & I have reset all VPN connections. All but 2 came & worked. I have tried to solve all day & impossible. VPN connections, both in question are there, but the ordinary internet traffic does not. I can get the traffic through the VPN also, but not the internet traffic that is supposed to go out directly. I need help as soon as POSSIBLE. (I need another set of eyes that know a lot about IPSec Cisco ASA VPN connections). Thank you. I enclose the config from the main location & one of the locations that works on the vpn. I ended up spending an ASA of version 8.2 to 8.4. I'll upgrade it more shortly, but I really need to get traffic in these workplaces. I can you connected to my machine also to check if necessary. The ASA have multiple VPN connections on them & they VPN most work as they were before the IP address change. Thanks for any response.

I understand you want to internet - bound traffic from a remote site (for example piedmontrow) to exit directly from this location?

If so, the line:
```
nat (inside,any) source static obj-10.2.0.0 obj-10.2.0.0 no-proxy-arp
```
.. .will be a problem because it replaces the less specific global nat rule:
```
object network obj_any
 nat (inside,outside) dynamic interface
```
I think you want that one to be in place (you can need to create an object for corp vs using the old 'name'):
```
nat (inside,any) source static obj-10.2.0.0 obj-10.2.0.0 destination corp corp no-proxy-arp
```

Cisco AnyConnect VPN question

I am ASA 5505 that I am of is running correctly by using the AnyConnect client. The question is, can I connect to the fine external interface, but cannot ping or attach them to any host on the inside. When I connect, it accepts the user name and password, and I can run the ASDM or SSH to the firewall very well, but not further. In the control, after I log in, I get an IP address inside, of the order of 10.7.30.x as expected.

Following configuration:

: Saved
:
ASA Version 8.2 (5)
!
asa5505 hostname
domain BLA
activate the password * encrypted
passwd * encrypted
no names

!
interface Ethernet0/0
switchport access vlan 2
!
interface Ethernet0/1
!
interface Ethernet0/2
!
interface Ethernet0/3
switchport access vlan 150
!
interface Ethernet0/4
!
interface Ethernet0/5
!
interface Ethernet0/6
!
interface Ethernet0/7
!
interface Vlan1
nameif inside
security-level 100
IP 10.7.30.1 255.255.255.0
!
interface Vlan2
nameif outside
security-level 0
IP EXTERNAL IP 255.255.255.128
!
interface Vlan150
nameif WLAN_GUESTS
security-level 50
IP 10.7.150.1 255.255.255.0
!
boot system Disk0: / asa825 - k8.bin
config to boot Disk0: / running-config
passive FTP mode
clock timezone STD - 7
DNS server-group DefaultDNS
domain BLA
permit same-security-traffic intra-interface
object-group service tcp Webaccess
port-object eq www
EQ object of the https port
object-group network McAfee
network-object 208.65.144.0 255.255.248.0
network-object 208.81.64.0 255.255.248.0
access extensive list ip 10.7.30.0 outside_1_cryptomap allow 255.255.255.0 192.168.24.0 255.255.252.0
access extensive list ip 10.7.30.0 inside_nat0_outbound allow 255.255.255.0 192.168.24.0 255.255.252.0
access extensive list ip 10.7.30.0 inside_nat0_outbound allow 255.255.255.0 172.16.10.0 255.255.255.0
outside_access_in list extended access permit tcp any host 159.87.30.252 eq smtp
outside_access_in list extended access permit tcp any host 159.87.30.136 Webaccess object-group
outside_access_in list extended access permit tcp any host 159.87.30.243 Webaccess object-group
access-list extended outside_access_in permit tcp host 159.87.70.66 host 159.87.30.251 eq lpd
outside_access_in list extended access permit tcp any host 159.87.30.252 Webaccess object-group
outside_access_in list extended access permit tcp any host 159.87.30.245 Webaccess object-group
outside_access_in list extended access permitted tcp object-group McAfee any eq smtp
permit access list extended ip 172.16.10.0 outside_access_in 255.255.255.0 10.7.30.0 255.255.255.0
outside_access_in list extended access permit ip host 159.87.64.30 all
standard access list vpn_users_splitTunnelAcl allow 10.7.30.0 255.255.255.0
IPS_TRAFFIC of access allowed any ip an extended list
access extensive list ip 10.7.30.0 outside_nat0_outbound allow 255.255.255.0 any
inside_access_in list extended access permit udp 10.7.30.0 255.255.255.0 any eq snmp
access extensive list ip 10.7.30.0 outside_cryptomap allow 255.255.255.0 172.16.10.0 255.255.255.0
pager lines 24
Enable logging
asdm of logging of information
host of logging inside the 10.7.30.37
Debugging trace record
Within 1500 MTU
Outside 1500 MTU
MTU 1500 WLAN_GUESTS
local pool VPN_POOL 10.7.30.190 - 10.7.30.200 255.255.255.0 IP mask
no failover
ICMP unreachable rate-limit 1 burst-size 1
ASDM image disk0: / asdm-645 - 206.bin
don't allow no asdm history
ARP timeout 14400
Global 1 interface (outside)
NAT (inside) 0-list of access inside_nat0_outbound
NAT (inside) 1 0.0.0.0 0.0.0.0
NAT (outside) 0-list of access outside_nat0_outbound
NAT (WLAN_GUESTS) 1 0.0.0.0 0.0.0.0
public static 159.87.30.251 (Interior, exterior) 10.7.30.50 netmask 255.255.255.255
public static 159.87.30.245 (Interior, exterior) 10.7.30.53 netmask 255.255.255.255
public static 159.87.30.252 (Interior, exterior) 10.7.30.30 netmask 255.255.255.255
public static 159.87.30.243 (Interior, exterior) 10.7.30.19 netmask 255.255.255.255
public static 159.87.30.136 (Interior, exterior) 10.7.30.43 netmask 255.255.255.255
Access-group inside_access_in in interface inside the control plan
Access-group outside_access_in in interface outside
Route outside 0.0.0.0 0.0.0.0 159.87.30.254 1
Route inside 172.16.1.0 255.255.255.0 10.7.30.1 1
Timeout xlate 03:00
Timeout conn 01:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02
Sunrpc timeout 0:10:00 h323 0:05:00 h225 mgcp from 01:00 0:05:00 mgcp-pat 0:05:00
Sip timeout 0:30:00 sip_media 0:02:00 prompt Protocol sip-0: 03:00 sip - disconnect 0:02:00
Timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute
timeout tcp-proxy-reassembly 0:01:00
Floating conn timeout 0:00:00
dynamic-access-policy-registration DfltAccessPolicy
AAA-server ADWM-FPS-02 nt Protocol
AAA-server ADWM-FPS-02 (inside) host 10.7.30.32
Timeout 5
auth-domain NT ADWM-FPS-02 controller
AAA-server ADWM-FPS-02 (inside) host 10.7.30.49
auth-DC NT ADWM-DC02
AAA authentication http LOCAL console
AAA authentication LOCAL telnet console
the ssh LOCAL console AAA authentication
Enable http server
http 206.169.55.66 255.255.255.255 outside
http 206.169.50.171 255.255.255.255 outside
http 10.7.30.0 255.255.255.0 inside
http 206.169.51.32 255.255.255.240 outside
http 159.87.35.84 255.255.255.255 outside
SNMP-server host within the 10.7.30.37 community * version 2 c
location of the SNMP server *.
contact SNMP Server
Community SNMP-server
Server enable SNMP traps snmp authentication linkup, linkdown cold start
Crypto ipsec transform-set ESP-3DES-MD5-esp-3des esp-md5-hmac
Crypto ipsec transform-set esp-SHA-ESP-3DES-3des esp-sha-hmac
Crypto ipsec transform-set ESP-AES-128-SHA aes - esp esp-sha-hmac
Crypto ipsec transform-set ESP-AES-128-MD5-esp - aes esp-md5-hmac
Crypto ipsec transform-set ESP-AES-192-SHA esp-aes-192 esp-sha-hmac
Crypto ipsec transform-set ESP-AES-192-MD5 esp-aes-192 esp-md5-hmac
Crypto ipsec transform-set ESP-AES-256-SHA 256 - aes - esp esp-sha-hmac
Crypto ipsec transform-set ESP-AES-256-MD5 esp-aes-256 esp-md5-hmac
Crypto ipsec transform-set ESP-DES-SHA esp - esp-sha-hmac
Crypto ipsec transform-set ESP-DES-MD5 esp - esp-md5-hmac
life crypto ipsec security association seconds 28800
Crypto ipsec kilobytes of life - safety 4608000 association
Crypto-map dynamic outside_dyn_map pfs set 20 Group1
card crypto outside_map 1 match address outside_1_cryptomap
peer set card crypto outside_map 1 206.169.55.66
map outside_map 1 set of transformation-ESP-3DES-MD5 crypto
card crypto outside_map 2 match address outside_cryptomap
peer set card crypto outside_map 2 159.87.64.30
card crypto outside_map 2 game of transformation-ESP-AES-192-SHA
map outside_map 65535-isakmp ipsec crypto dynamic outside_dyn_map
outside_map interface card crypto outside
Crypto ca trustpoint *.
Terminal registration
full domain name *.
name of the object *.
MYKEY keypairs
Configure CRL
Crypto ca trustpoint A1
Terminal registration
fqdn ***************
name of the object *.
MYKEY keypairs
Configure CRL
Crypto ca trustpoint INTERMEDIARY
Terminal registration
no client-type
Configure CRL
Crypto ca trustpoint _SmartCallHome_ServerCA
Configure CRL
Crypto ca trustpoint ASDM_TrustPoint0
Configure CRL
Crypto ca trustpoint ASDM_TrustPoint1
Configure CRL
ca encryption certificate chain *.
certificate ca 0301
BUNCH OF STUFF
quit smoking
A1 crypto ca certificate chain
OTHER LOTS of certificate
quit smoking
encryption ca INTERMEDIATE certificate chain
YET ANOTHER certificate
quit smoking
Crypto ca certificate chain _SmartCallHome_ServerCA
certificate ca LAST BOUQUET
quit smoking
crypto ISAKMP allow outside
crypto ISAKMP policy 10
preshared authentication
3des encryption
sha hash
Group 2
life 86400
No encryption isakmp nat-traversal
Telnet 10.7.30.0 255.255.255.0 inside
Telnet timeout 30
SSH 206.169.55.66 255.255.255.255 outside

SSH timeout 5
Console timeout 0
management-access inside
dhcpd 4.2.2.2 dns 8.8.8.8
!
dhcpd address 10.7.150.10 - 10.7.150.30 WLAN_GUESTS
enable WLAN_GUESTS dhcpd
!

a basic threat threat detection
Statistics-list of access threat detection
no statistical threat detection tcp-interception
SSL encryption rc4 - md5 of sha1
SSL-trust A1 out point
WebVPN
allow outside
AnyConnect essentials
SVC disk0:/anyconnect-dart-win-2.5.2019-k9.pkg 1 image
enable SVC
attributes of Group Policy DfltGrpPolicy
Protocol-tunnel-VPN IPSec l2tp ipsec svc webvpn
internal VPNUsers group strategy
Group Policy VPNUsers attributes
value of server DNS 10.7.30.20
Protocol-tunnel-VPN IPSec l2tp ipsec svc webvpn
Split-tunnel-policy tunnelspecified
value of Split-tunnel-network-list vpn_users_splitTunnelAcl
dwm2000.WM.State.AZ.us value by default-field
Split-dns value dwm2000.wm.state.az.us
username HCadmin password * encrypted privilege 15
attributes global-tunnel-group DefaultWEBVPNGroup
address VPN_POOL pool
authentication-server-group ADWM-FPS-02
strategy - by default-VPNUsers group
tunnel-group 206.169.55.66 type ipsec-l2l
IPSec-attributes tunnel-group 206.169.55.66
pre-shared key *.
tunnel-group 159.87.64.30 type ipsec-l2l
IPSec-attributes tunnel-group 159.87.64.30
pre-shared key *.
!
class-map IPS_TRAFFIC
corresponds to the IPS_TRAFFIC access list
class-map inspection_default
match default-inspection-traffic
!
!
type of policy-card inspect dns preset_dns_map
parameters
message-length maximum 512
Policy-map global_policy
class inspection_default
inspect the preset_dns_map dns
inspect the ftp
inspect h323 h225
inspect the h323 ras
inspect the rsh
inspect the rtsp
inspect esmtp
inspect sqlnet
inspect the skinny
inspect sunrpc
inspect xdmcp
inspect the sip
inspect the netbios
inspect the tftp
inspect the icmp
Review the ip options
class IPS_TRAFFIC
IPS inline help
!
global service-policy global_policy
field of context fast hostname
anonymous reporting remote call
call-home
Profile of CiscoTAC-1
no active account
http https://tools.cisco.com/its/service/oddce/services/DDCEService destination address
email address of destination [email protected] / * /
destination-mode http transport
Subscribe to alert-group diagnosis
Subscribe to alert-group environment
Subscribe to alert-group monthly periodic inventory
monthly periodicals to subscribe to alert-group configuration
daily periodic subscribe to alert-group telemetry
Cryptochecksum:e70de424cf976e0a62b5668dc2284587
: end
ASDM image disk0: / asdm-645 - 206.bin
ASDM location 159.87.70.66 255.255.255.255 inside
ASDM location 208.65.144.0 255.255.248.0 inside
ASDM location 208.81.64.0 255.255.248.0 inside
ASDM location 172.16.10.0 255.255.255.0 inside
ASDM location 159.87.64.30 255.255.255.255 inside
don't allow no asdm history

Anyone have any ideas?

Hello

Please, add this line in your configuration and let me know if it works:

access extensive list ip 10.7.30.0 inside_nat0_outbound allow 255.255.255.0 10.7.30.0 255.255.255.0

I ask you to add that it is because you have not specified any exceptions for the return shipping. Once you add to it, will allow you to go through the tunnel VPN, packets back. When this command is not there, you will be able to access everything on the SAA but nothing behind it.

Let me know if it helps.

Thank you

Vishnu

VPN question: ISP assigned a private ip address

Hi all

Internet-online-online headquarters VPN 3015 concentrator

Users remote VPN Client connected to the internet using a private ip address provided by the ISP (cable) is to establish a VPN tunnel, but they can not ping our private network.

The only way to get the VPN works is when remote users use a public ip.

It is a question of Cisco VPN Client? Or it has a solution...

Thanks in advance,

Kind regards

Carlos Welhous

Network engineer

Hi Carlos,

If your ISP gave you a private address, they must use NAT - in which case you will have to enable NAT - T on the VPN concentrator.

To configure the NAT - T in the world, go to Configuration | System | Tunnelling protocols. IPSec | Screen of transparent NAT and check on NAT - T IPSec case.

VPN - question of General design for a ut of a router tunnel more

Hello

We have a router that has VPN connections with different partners of our company. VPN remote access were used on computers that are connecting to the different partners of our company.

There has been problems of this kind, that is to say put on both a watchdog and a customer vpn cisco router led to blue-screens on the PC.

The current idea is to put different tunnels from site to site on the router (default gateway of PC clients that connect to the partners). My question is... How our PC to get DHCP addresses on networks of visitors, once the tunnels are up? I guess I'm alittle confused about the address for the PC on our side how will work.

Thanks for your help.

Divide the pool of ip from the internal network, you're going to visit. for example the document below will be exaplain the same configuration in user mode.

http://www.Cisco.com/en/us/products/HW/vpndevc/ps2030/products_configuration_example09186a00806ab788.shtml

Unable to connect VPN client anyconnect

Hello

We have ASA5510 with version 7.x and asdm 5.X, I upgraded to 8.3 and asdm 6.2, and I peer vpn 2 and 250 ssl.

When I try to connect via the client software, I see in newspapers port UDP 500 is created as shown below.

some other things are ongoing, and I get error as shown below.

Connection terminated locally by the client secure VPN

Reason 412: Remote peer is no longer meet

Complete connection the.

I suspect that this is the key question of enabling VPN-3DES-AES.

When I go to remote access VPN - advanced - SSL Seetings - left panel of encryption available Algorithems I DES-SHA1 when trying to slide right tto algorithems Panel active, it gives me error * below

[ERROR] sl encryption rc4-des-sha1 sha1

3DES/AES algorithms require an activation key for VPN-3DES-AES

and currently in the right algorithms Panel Active, I have only RC4-SHA1,

kindly somebody suggest me what is the problem or is it related to any issue of license/activation key.

March 31, 2011 23:54:40 302015 94.97.180.0 57013 x.x.x.x 500 built connection UDP incoming 56694 for outside:94.97.180.0/57013 (94.97.180.0/57013) at identity:x.x.x.x/500 (x.x.x.x/500)

Cool... Please rate and mark as answer...

Thank you

TJM

Access remote VPN question - hairpin

Hello, I did a search before posting this question but I have not found anything specific to my situation.

We have our ASA5520 configured in our main office to allow remote access Cisco VPN client users to access our network. We have a (network 192.168.1.0/24) remote desktop we have a configured on the same ASA5520 VPN IPSec tunnel that allows the use of internal users (in the main office) to access resources on the network remote (192.168.1.0) and vice versa. The problem is that when users connect to the remote VPN access, they are not able to access the resources of the remote office network. We created the nat0 ACL and labour, and split tunnel routing is implemented for users VPN remote network access (if I make a copy of the route on my laptop after connecting to the VPN, I see the road to 192.168.0.0/24 in my routing table). Routing everything is in place to do this, since the IPSec VPN tunnel is up and working. My suspicion is that the question has something to do with the consolidation of these VPN clients.

What else needs to be configured to work? Thank you.

Hi Scott,.

I have a client with a PIX 515E which allows connections to remote VPN and VPN LAN2LAN multiple connections.

We had this problem too... so what I made in my pix was:

TEST (config) # same-security-traffic intra-interface permits (its off by default)

If you use ASDM go to:

Configuration > Interfaces >

at the bottom of this page, there is an option that says: 'enable traffic between two or more host computers connected to the same interface '.

Check and it should work... I hope

I await your comments...

Kind regards.

Joao Tendeiro

I have a problem connecting vpn reason 412

I can find a sollution to my problem:

I can't connect to VPN through ADSL, the message that appears is the following; secirusee VPN connection cut off locally by the client. reason 412: the remote computer responds more connection over the period sep18:40:03 days 0 00:00:00

Please find me the sollution

I'm in Morocco

Hello

See this page to select your language:

http://support.Microsoft.com/common/international.aspx

====================================

Or sorry that it is area English.

On the top of this page of answers (English) v -click and set your language.

I hope this helps.

Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

Unable to connect VPN Lenovo a800

Dear friends

I will try to connect to my server with VPN, but still unsuccessful said.
but not on any other device still attached.

My lenovo a800 model

buidl number a800_row_s107_121216

Android version 4.0.4

someone at - it gives me the solution?

Thank you

1. install VpnRoot and BusyBox.
2. in VpnRoot click - binary update PPPD in options
3 standard VPN or VpnRoot connect

=)

A connection VPN Question

Similar Questions

Maybe you are looking for