a constant reminder to use HP connect to determine the use of ink

Similar Questions

• I have five Airport extreme with their network of people names different location home.  I have a brighthouse router that I use to connect to all the extremes of the airport.  I experienced the problem of connection to the internet.

  I have five airport extreme, with their network of people of names in a different location in the House.  I have a brighthouse router that I use to connect to all the extremes of the airport.  I experienced the problem of connection to the internet.

  Are all connected to the Brighthouse router by Ethernet extremes? Are all of the extremes configured as bridges?

• I can't access my hotmail account or book a hotel since the upgrade to 3.6.8. I get the following message: "the proxy server refuses connections. Firefox is configured to use a proxy server refusing connections. Check the proxy settings for

  I can't access my hotmail account among some other sites since the upgrade to 3.6.8 on my macbook. I get the following message: "the proxy server refuses connections. Firefox is configured to use a proxy server refusing connections. Check the proxy settings to make sure they are correct. Contact your network administrator to make sure that the proxy server is running. "I can not even find the proxy settings more.

  Windows: Tools > Options > advanced > network > settings
  OSX: Firefox > Preferences > advanced > network > settings
  Linux: edition > Preferences > advanced > network > settings
  Set your settings to connect to the 'No proxy', if you are not using a proxy.

  Firefox 3.6.6 added a new preference for connection settings, use proxy Panel"system settings", and the default value is the point. " This new preference does not affect most users, because they probably do not have a proxy set in place in their operating system. Therefore, most users should use the setting "no proxy".

• Whenever I use my iPhone attaches to internet connection, in the window 'Connections available to the general public', my iPhone is presented as "iPhone 1" the next time that I used it, «iPhone 2 "then 3 then 4 etc.»»

  attaches to the iPhone

  Whenever I use my iPhone attaches to internet connection, in the window 'Connections available to the general public', my iPhone is presented as "iPhone 1" the next time that I used it, «iPhone 2 "then 3 then 4 etc.»»  Currently up to 9. How can I stop this from happening? Or is it still important?

  Hello StevenHuurman

  Try this.

  1. turn on WiFi tethering via the iPhone.

  2 connect the system to the iPhone tethered via the wireless connection.

  3. without closing the iPhone tethering, disconnect the straps of the iPhone system.

  4. now reconnect the system to the loin and Note If the wireless connect denominator increases.

  For the above steps, if you have access to other computers, then try the same steps and allow to know the results of these institutions.

  If the denominator goes up so we know it is a problem with the system and if not then whenever you turn off modem, then again on the iPhone are considered as a new network connection and something has changed in the phone.

  Another thing, you have selected the option for the system to connect automatically when this network is in range?

  Unfortunately I do not know what version of the OS you have here are the steps for Windows Vista and Windows 7. During the installation process for Windows Vista and Windows 7, you will see the option "connect automatically when this network is in range. Make sure that you click this box when you configure the connection to the loin.

  Let me know the results. Thank you.

• Can I use MSTSC to connect remotely on the internet?

  Can I use MSTSC to connect remotely on the internet (local computer is Vista Ultimate SP2 to a distance Win 2003 Server)? I used MSTSC on my local network and it works well.

  Hi Ibaltsae!

  Thanks for posting. Yes, you can use MSTSC to connect remotely to a computer or server on the internet, the same as if you were using your local network. To connect to the remote computer, use the DNS or public IP that are associated with name.

  I hope this helps! Shawn - Support Engineer - MCP, MCDST
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think

• I added a router and a connection high speed using windows vistawhen pc is connected to the router her there is no internet connection. When the pc connected to the Internet by modem cable is available

  I added a router and a connection high speed using windows vistawhen pc is connected to the router her there is no internet connection. When the pc connected to the Internet by modem cable is available

  Hello

  I suggest you to follow the steps in this link and check if it helps:

  http://Windows.Microsoft.com/en-us/Windows/help/wired-and-wireless-network-connection-problems-in-Windows

  It will be useful.

• The connection attempt failed because the modem (or other connecting device) on the remote computer is out of use. Error 777

  I've always used my blackberry to tether my phone but I get the following error message and I can't solve this problem, any help would be appreciated, thanks!

  The connection attempt failed because the modem (or other connecting device) on the remote computer is out of use. Error 777

  Hello

  It seems that the blackberry is not more.

  Pass the installation attaches on the blackberry and make sure that it is configured properly and work.

• Is there a way to change the connection string to the database by using the command line on the virtual machine?

  Hi, I use 1.5 space Horizon

  can someone help me by telling me where I can change the connection string for the database on the virtual machine itself.

  I was away, and our stuff has been migrated databases to another server. Now my horizon does not connect because it can not find the database. I can either on the hwconfigurator.xxx.com.

  Thank you

  What do you see when you go to https://hwconfigurator.xxx.com?

  You can try to change this property in /usr/local/horizon/conf/runtime-config.properties on your service - will (s) and the server restart of tc by using the command "/etc/init.d/horizon-frontend restart".

  datastore. JDBC. URL = jdbc:PostgreSQL: / //saas? = stringtype unspecified

• Is it possible to use Adobe Connect trial with the Moodle Test Server offer?

  When I did the Test of Connection, I got the following message. Any suggestion will be thankful.

  A series of tests were run to determine if the Adobe Connect Pro Server has been properly configured for this integration to work and also determine if the user credentials provided in the global settings activity has the appropriate permissions to perform the necessary tasks required by the activity module.  If none of the tests below have failed, this activity module will not work correctly.

  To get help and documentation in how to configure your Adobe Connect Pro Server, please see the help page of MoodleDocs for this activity help page module

  Sending call common-info:

  has managed to get the session key: em1breezh9zsy9oet3zotmo8

  connected as user admin

  Test retrevial of shared content, registration, and records of the meeting:

  Error getting the shared content folder

  XML request:
  <? XML version = "1.0" encoding = "UTF-8"? > < params > < param name = 'action' > sco-shortcuts < / param > < / params >

  XML response:
  <? XML version = "1.0" encoding = "utf-8"? > < results > < status code = "lack of access" subcode = "no-login" / > < / results >

  getting error forced archives folder (meeting records)

  XML request:
  <? XML version = "1.0" encoding = "UTF-8"? > < params > < param name = 'action' > sco-shortcuts < / param > < / params >

  XML response:
  <? XML version = "1.0" encoding = "utf-8"? > < results > < status code = "lack of access" subcode = "no-login" / > < / results >

  record of meetings to get error

  XML request:
  <? XML version = "1.0" encoding = "UTF-8"? > < params > < param name = 'action' > sco-shortcuts < / param > < / params >

  XML response:
  <? XML version = "1.0" encoding = "utf-8"? > < results > < status code = "lack of access" subcode = "no-login" / > < / results >

  Error creating meeting testmeetingtest folder

  XML request:
  <? XML version = "1.0" = "UTF-8 encoding"? > < params > < param name = 'action' > sco-update < / param > < param name = ' type' > meeting < / param > < param name = "name" > testmeetingtest < / param > < param name = 'folder-id' > < / param > < param name = "date-begin" > 2013-05-10T 15: 04:44.000 + 01:00 < / param > < param name = 'date-end' > 2013-05-10 T 16: 04:44.000 + 01:00 < / param > < / params >

  XML response:
  <? XML version = "1.0" encoding = "utf-8"? > < results > < = "invalid" status code > < invalid field = 'folder-id' type = subcode 'id' = 'format' / > < / status > < / results >

  Error creating the user testusertest

  XML request:
  <? xml version = "1.0" = 'UTF-8' encoding? > < params > < param name = 'action' > principal-update < / param > < param name = "name" > testusertest < / param > < param name = "name" > testusertest < / param > < param name = "login" > [email protected] < / param > < param name = "password" > 96105C5415A5D79FA9EA073F7C5DD501 < / param > < param name = "extlogin" > [email protected] < / param > < param name = ' type' > user < / param > < param name = "send email" > false < / param > < param name = "a-kids" > 0 < / param > < param name = "email" > [email protected] < / param > < / params >

  XML response:
  <? XML version = "1.0" encoding = "utf-8"? > < results > < status code = "lack of access" subcode = "no-login" / > < / results >

  HTTP header authentication is explained here: http://help.adobe.com/en_US/connect/9.0/webservices/WS5b3ccc516d4fbf351e63e3d11a171ddf77-7 ff5_SP1.html #WS5b3ccc516d4fbf351e63e3d11a171ddf77-7fe4_SP1

• Router WRT54G3G-ST - no internet connection - cannot reset the router

  Hello.  Some longer story certainly not short (I apologize for the length of hiking...  I don't know what is and isn't important, will scan, please...  I'm sorry...) : recently my computer (Dell XPS 400, Windows XP Service Pack 3, Internet Explorer 7 with phishing filter and pop-up blocker on, SiteAdvisor, up-to-date McAfee Anti-virus and Firewall and a router Wireless-G Linksys WRT54G3G-ST with its AC adapter plugged into the wall power outlet and a network cable directly connected to my computer.) received a drive-by generic.DX!12536d125737 Trojan horse without me download whatever it is one of the few sites I visit every day.  My internet connection has crawled, and I have now no connection at all.

  I've been making McAfee good volunteers forums help quick and very helpful...  They recommended Malwarebytes Anti-Malware for me, I downloaded my own second computer (a laptop) on my flash drive, then on my infected computer.  I ran, tried adapting so recommended, and only then discovered the Trojan horse killed my broadband entirely.  I scanned with it anyway and he quickly found and deleted / quarantine 11 Adware.MyWebSearch related files, but nothing else.  Then, they gave me a link to a patch off updater file and tells me scan in SafeMode until nothing else has been found and check if it has fixed my lack of broadband access.  I did, Malwarebytes found nothing else, but unfortunately I still had no broadband.

  Then, they recommended WinsockXPFix.  Which I ran and he did all his OK registry changes, I restarted if necessary but still no broadband unfortunately.  WinsockXPFix using make things worse for me with the registry changes, did he?  I used the backup of the registry to save the registry before changed files before running.  Should I come back since I don't always have a broadband connection?  McAfee volunteers kindly then told me that I had to hard reset the router, but I tried many times with no fortune.  I'm at a loss as to what, if anything, do we hope to get my broadband, please...

  It is very confusing with many different variants for resetting routers, and what should I do to my router model (Variations: unplug this cable/adapter exactly where; pressed the reset button between 5 and 30 seconds, the computer restarts, or no, 1 or 2 minutes between different steps, waiting or not - and for all these exactly when in the restart procedure.).

  I have reset once before with the reset button, page of routers to http://192.168.1.1default admin password, then it changed to security, etc. but this time I can't make it work.  I'm happy as possible to try once again to get an appointment by perhaps, something please...  When I go to http://192.168.1.1 now, or to any other address, Internet Explorer gripes at me that I am offline, which is annoyingly correct.  I do not have and never had Zone Alarm, but disable my McAfee Firewall does not help.  IPCONFIG at the command prompt gives me an address of 169.254.X.X assigned Windows

  I was going to use the routers Wizard installation CD to try to reset the router, and if that didn't try to get its firmware version number to perhaps upgrade.  But I was going to ask here first of all for expert advice because I read a lot of things that can go wrong during the upgrade of the firmware.  However, analysis the CD (without launching the CD). McAfee found the virus W32/HLLP. Philis.ini in the file "D:\_desktop.ini" on the CD.  McAfee didn't delete the file, I don't know why.
  I scanned my computer together several times and no infections have been reported.  I downloaded the file several times, both www.virustotal.com (39 online antivirus) and virusscan.jotti.org (20 online virus scanners) and every time each virus scanner didn't report any possible infection.  My updated virus scanner McAfee reported a false positive and still Jotti and VirusTotal 2 scanners from McAfee report the file as own probable?  Is "_desktop.ini" a file legitimate Linksys?  I have not found any information on Linksys forums about this.  My problems just keep multiplying... mentioning problems more...

  Find this suspicious file on the CD I decided to download instead the Linksys Setup Wizard
  (Router product page: http://www.linksysbycisco.com/US/en/support/WRT54G3G-ST/download )
  File: http://downloads.linksysbycisco.com/downloads/WRT54G3G-ST_SetupWizard_4_2_06042008.zip)
  my flash drive, then on my infected computer that is connected to the router.  I ran it (downloaded the version of the file: 4.2.0.007 - original version CD Setup Wizard: 4.0 print on CD front) and immediately gave it 1 of the 3 options: Mobile broad band only, high flow only WAN, or WAN high throughput and high speed Mobile.  I don't know what damage, if any, I caused by continuing.
  It seemed that he was trying to go in the entire router configuration process.  I thought it would take me to some options to reset the router, as I read in the user's Guide, and besides - it is my understanding.  The installation process stopped at only 30% done "router not found, make sure that the router is connected correctly and try again."  How many Overwrite original router configuration files I did continue?  I'm quite confused.  The wizard does not check if the router has previously been set up before setting up again?  Unlike version caused my router to not be detected by the Setup Wizard?  Is the horse of Troy generic.DX!12536d125737 who killed my trash to wide band my computer settings so badly that my router is undetectable/essentially not configured?

  Update of sorts: I tried one last time to reset the router, and I unplugged/plugged the network cable.  The fact that I had still no broadband on my Dell XPS main use computer that is connected to the Linksys router.  However, my laptop, with map data in the router, was for the first time able to find network - constant connection and speed is great, it's what she allways has been on the laptop (the Trojan/router problems, my laptop only for broadband with the data in the laptop card.).  Perhaps the cable network was simply not re-connected properly/entirely for 1 of the many attempts of resetting, indeed, it could also explain the downloading, installation wizard is not able to find the router/only get 30% done.

  Laptop prompt IPCONFIG/all with data card Sprint inserted into the slot of your laptop:
  IP = 174.158.XX.XXX (Sprint)
  Subnet mask = 255.255.255.255
  68.28.90.91 = DNS servers
  68.28.82.91

  Laptop prompt IPCONFIG/all with Sprint data card inserted in the router:
  192.168.1.1XX = IP address
  Subnet mask = 255.255.255.0
  Default gateway = 192.168.1.1
  = 192.168.1.1 DHCP server
  Servers DNS = 192.168.1.1

  Since my laptop started to work with the data card into the router, I have not tried again to reset the router and I tried the downloaded installation wizard.  I don't want to spoil anything about it any further as I have (?) / the Trojan has, and I need expert advice, please, about which of the 2 if not more, I do (first?).  On my laptop, typing http://192.168.1.1 in Internet Explorer Gets the ToolTip for the user name and password, but I did not.  I read that you should not reset the router or (?) Is it just 1 or two please?) upgrade the firmware unless the computer is connected directly to the router - that is not my laptop.  On my other computer that still has no broadband, Internet Explorer still says I am offline when you type http://192.168.1.1 in.  My IP address on it is still a 169.254.X.X assigned Windows and a command PING 192.168.1.1 prompt returns with 'Destination host unreachable.', as it has been always and even with all the other addresses (with the exception of 169.254.X.X).

  Boring 2nd "update" of all kinds, my apologies for the length, as always: I've been so focused on the horse of Trojan/broadband killing that cluelessly largely forgot I switched with AOL.  Try AOL dial-up does not work, madness thickens...  Software AOL tells me to check my connection, but all the phone cords are connected as should be.  I plugged a phone directly into the wall jack and I get the tone, I can call OK and the phone rings and receives calls OK.  State of the devices-Modems-Properties-Device Manager says that the modem is not working properly, and "resources" tab shows no conflicts.  Query Modem on the diagnosis tab seems OK to me, as does the journal, but I'm certainly not an expert like allways.  I change all the settings from anywhere.
  I noticed and that check IPCONFIG it says that my IP address is 192.168.1.100 it lasts maybe that someday (then goes back to 169.254.X.X), maybe more, I don't know - I don't check that often to define (should I?).  Meanwhile my broadband, or my works switched.  I can PING 192.168.1.100, but nothing else.  I am convinced the wrong killed Trojan horse my broadband and dial-up - I've never had a problem with my prior V.9x DFVc Modem 56 K Conexant D850.  In addition, I am not convinced the Trojan horse is not still lurk everywhere on my computer, I think that it's...

  Any help with the restoration of my high speed/dial-up is greatly appreciated, please...  Thank you!

  Hello.  There has been entirely too long since I answered, I'm sorry.  There is no excuse, and it is terribly rude to me...  You took the time to read and answer me, and I appreciate very much that in effect.  I apologize for being late, I'm sorry...

  After that I left my message, I downloaded several virus/spyware scanners, etc from my laptop on my USB key, then my other computer for some in-depth analysis necessary.  Was one I downloaded Network Magic that somehow, some way fixed both my high speed/dial-up internet on my main computer is connected to the router WRT54G3G-ST.  I don't know what/how he fixed my connection, but the connection high speed flow works brilliantly since...  Network Magic has worked for me, and I highly recommend it to all those who have stubborn lack of internet problems (caused by Trojans to this) that I did.  There is no guarantee this will work, but it did for me in my amazement.

  Network Magic, as is the Linksys is owned by the parent company Cisco.  Respectfully to all the knowledgeable experts here (which clearly I'm not), I don't want to venture out of the limits.  I'm trying to simply hope to be useful and save a few headaches for both you volunteers and users... buy a new router or the computer was in my mind, with all due respect, I recommend suggesting to try Network Magic users if the reset of the router/all other fails, please.  I used WinsockXPFix/WinsockFix utility before using Network Magic, I don't know if it matters.

  I also upgraded my package of McAfee, I installed on my old software rather than uninstall the first, which caused errors in all things virus scanner a critical need.  I install right now, but it caused some delay to refocus my time.  Some virus scans found many Trojan horses, some were same / in the same folders that killed my broadband - which stopped me in my tracks to ensure a clean uninfected.

  Certainly, it doesn't fully explain the long time, and I'm sorry, once again.  It's just that I'm being cautious and slow in all this.  To answer the first very good idea, you did: Unfortunately, there is no room on my other computer to connect the router in to, which even so caused frustration (at the time).  I forgot to include this in my post new length of countless things to see / do not forget...  It was a brilliant idea, however, I thank you...

  Thank you for your time and your help, I appreciate it sincerely...  Thank you...  I think and hope that this matter is resolved.  It seems to be, the router works perfectly as it always has, and I am positively happy as can be in this regard.  Thank you...  Peace...

• connection / disconnection of the oracle database

  Hello
  I looked upwards and downwards in the documentation of oracle for a good reason why we should not connect to the oracle database, delivery time of 4 or 5 Oracle sql disconnect, reconnect 4-5 sql statements and disconnect again(using sqlplus).
  What I currently have is an application that has this kind of behavior that would be as connect/disconnect to the database over 300 times in 25 minutes.
  I know that this is not scalable, but would like to show the programmer in the oracle documentation that is not a recommended bestpractes.
  Any help will be appreciated.

  What you can explain the developer that is whathappens when a connection is given and terminated, the concept of the PGA and server allocation and dealloction process. You can include more use of server resources when all that happens. Once this part is well to him, you can tell him that hisapplication this constant opening and closing of session, it don't let not the server works optimally as morethan optimize work of its apps, server would be busy giving him the connection later by removing its connetion.

  Just take a look at the documentation and found this guide, PT
  http://download.Oracle.com/docs/CD/B19306_01/server.102/b14211/design.htm#CJHFIHFC

  >
  Factors that may prevent a linear scaling include:

  Configuration, implementation and poor application design

  The application has the greatest impact on scalability. For example:

  The poor schema design can cause expensive SQL that do not evolve.

  Poor transaction design can cause problems of locking and serialization.

  Bad connection management can cause periods of poor response and reliable systems
  >

  Would that help?
  HTH
  Aman...

  Published by: Aman... April 26, 2009 15:29
  Adding link guide PT

• That means "bad connections" warning to the average of the Mail account setup?

  The Mail account setup dialog box, the works of autodetect IMAP, but after clicking "Done", a warning is displayed (see image), declaring "Thunderbird may allow you to get your mail using the supplied configurations." However, you must contact your administrator or your e-mail provider about these incorrect connections. See the Thunderbird FAQ for more information. ».
  I checked the Thunderbird FAQ (or what is the information that I found) but there is no explanation of this warning.

  On the connection used:

  -C' is a working IMAP with STARTTLS on port 143

  -the server is using a self-signed certificate (not expired), which Thunderbird complains not in the warning

  -with the help of a Setup from another existing SMTP account (no control in the Mail account setup dialog box)

  So I ask myself, what this warning is really all.
  Best regards

  Watch dialog box seems to occur only if:

  • There is an e-mail account, SMTP outgoing self-signed certificate
  • The new e-mail account uses the only existing outgoing SMTP Protocol

  This could be a default in Thunderbird 31.7.0, because there is only one such warning dialog to the configuration of the e-mail account that is used for reporting several different problems. The code (source Thunderbird: mailnews/base/prefs/content/accountcreation/emailWizard.js) power switches of the incoming and outgoing messages, but in this particular case, it seems to turn off all messages - which leaves just the text displayed in the screenshot - compare to https://support.mozilla.org/en-US/kb/server-doesn ' t-use-encryption

  When you use a new profile without all accounts in Thunderbird 31.7.0, new account creation work without such a warning.

• Publish to Webdav still fails to connect, probably because the connection information is never requested.

  Try to publish the Thunderbird calendar to the Webdav server by following the instructions Help article https://support.mozilla.org/en-US/kb/exporting-and-sharing-a-calendar but I have never asked for the connection information. The publication fails with the error "the calendar has no publication. Status code: 405: method not allowed. "I can use other Webdav software enabled on this server ok. Can anyone suggest what the problem?

  Bonoky,
  As I mentioned in my last reply, I think the key is that you must have a calendar on your server program, if the publication function can communicate with it.
  I recommend to ask you this question 'high' to the next level if you want additional help.

  - duggabe
  

• How can I configure Mozilla to accept connections on port "The World Wide Web (HTTP) service"?

  When you try to embed a video in PowerPoint 2013, the "Sorry we are having some problems of temporary service" message.

  In research on the problem to Microsoft. com, the following message is received: Mozilla is not configured to accept connections on port "The World Wide Web (HTTP) service."

  Hmm... PowerPoint must use Windows to connect to the internet and not Firefox.

  What method do you use?

  (1) insert > video > video online

  Apparently, there was an update this month that allows this, as described in this message of support (see the top of page answer right after the question): embedding video in powerpoint 2013 - Microsoft YouTube community online

  Here's how it should work after the update: Insert or link to a video on YouTube - PowerPoint

  (2) developer > control > Shockwave Flash Object

  As documented on other sites, such as: https://www2.palomar.edu/pages/atrc/2013/09/17/how-to-embed-youtube-video-in-powerpoint-2013/

• My new airport does not detect my existing WiFi network, I can connect only via the LAN.

  Bought a new airport 1 TB TimeCapsule and I wanted to add to my existing via a WLAN network. It does not detect it and I can connect only via the LAN. What I am doing wrong?

  Unfortunately, unable to connect to a 3rd time Capsule part wireless using a Wi - Fi.

  You need to connect to the time Capsule to your existing modem/router using a wired Ethernet cable connection, permanent... like the Time Capsule Setup Guide illustrates.

  

  If you really don't want the time Capsule to connect using the wireless... she can do... If it gets a signal to another Apple wireless router. So if you were ready to add another Apple... as an AirPort Extreme router... and connect it to your existing Ethernet cable router/modem and configure AirPort Extreme to broadcast a wireless signal... .then.. .the Time Capsule would be able to connect in this way, assuming that he is where he can receive a good quality of AirPort Extreme wireless signal.