A guest is saying there was an unauthorized change is for windows and impossible to verify windows.

Similar Questions

• Help :-(I can't on my laptop whenever I connect it say there was a unaurtherized change for windows, how to fix?

  I did a search of validation for windows and it could not find anything. I can't reinstal windows because my laptop is in perfect and I don't have a disc. is there a way that this problem could be solved without paying a fortune for windows 7?

  Hello

  ·          What version of the operating system is installed on the computer?

  You will need to make arrangements for a disc of Windows solve the problem. If this is not the case, contact homes perfect for better support.

  See also: http://support.microsoft.com/kb/931699

• My MacBook froze during the installation of the update at El Capitan and now I am unable to connect to any except the screen of the guest user. There was a message of panic, and somewhere in there, he said no set of OS. I tried to start without danger, it

  My MacBook froze during the installation of the update at El Capitan and now I am unable to connect to any except the screen of the guest user. There was a message of panic, and somewhere in there, he said no set of OS. I tried to start without danger, it does not work either.

  This general situation may be similar to what is mentioned in this sequel to thread of the CSA

  and if the remedy is to use instructions; detailed and I hope they are correct...

  Re: Restart fails after installation of El Capitan help!

  Or you can try and see on the repair of the system and then if your disk utility can

  See the Macintosh HD, as a boot volume, you could restart from OS X Recovery to

  the Mac system, to see if this solves the problem. There may be more than one cause.

  You could try and boot into OS X Recovery, utilities out there, and other options are available.

  • OS X: on OS X Recovery - Apple Support

  This example uses a special partition on the hard drive of recovery which is not in the

  same disc that the Mac OS X section; However if your hard drive is missing, these other

  items may also be at risk. You must have and maintain backups of your duplicate content

  on the external storage drives closed; In addition, a Time Machine backup helps to restore.

  • Apple OS X and Time Machine tips:

  http://pondini.org/OSX/home.html

  • Tips for OS X - using HD recovery:

  http://pondini.org/OSX/RecoveryHD.html

  {Using the utility disc and other tools can be done from the boot OS X Recovery volume

  Beware of the fact these tools can also delete or reformat your content; wiping.}

  Don't know what to say; you could see visiting an Apple store with genius if

  There is an official store. Usually for best time planning you would contact them for an appointment.

  • Make an appointment at an Apple Retail Store Genius Bar
  • Find an Apple authorized service provider
  • https://locate.Apple.com/country - Apple - find places - selector of country (if outside the U.S.)

  Or if there is no official retail Apple Store with genius, the following suggestion would be to contact

  a service provider authorized Apple, an independent specialist who is qualified in the repair of Apple.

  In any case...

  Good luck & happy computing!

• I rented a movie on google play. He will not play. I get a message that says: "there was a problem playing the video on this browser. Help!

  I rented the movie and proceeded to go to google play to see. It acts like it is loading, but the screen goes black and a message says: "there was a problem playing the video on this browser. Try the movies play & TV Chrome App. Learn how to install Chrome and chromium app here. problem: I tried to download Chrome (which I don't like), but it seems not to take. I even rebooted. Google opens upward in Chrome. I really want to watch this movie! Help!

  Try:

  • https://support.Mozilla.org/KB/fix-common-audio-and-video-issues

• How can I know if Migration Wizard works... I have the gray wheel on the new mac and it is after a msg error saying there was an error with iCloud (in red)

  How can I know if Migration Wizard works... I have the gray wheel on the new mac and it's after a msg error saying there was an error with iCloud (in red). What is happening with a MacBook Pro refurbished, I just got today. Thanks for any help.

  The guarantee gives the right to the free phone support for the first 90 days of ownership.

• Manager Update says "there was an error downloading this update. Exit and try again later. "for every application in CS5 Design Premium

  Poster 8 Update Manager updates available. I chose the update, enter my password of the computer and the progress bar indicates the download. When the download is complete, a list of all applications is up to each of them saying: "there was an error downloading this update. Quit and try again later. "Later, I tried several times for several days, always the same result. How can I update my CS5? I reinstalled it recently just of my Installer on my drive from there, so I know that there were many updates for a few years then. And the update manager says there are 8 available.

  

  

  

  updated directly, updates

• Is there an Add on XP Mode for Windows 7 Home Premium?

  Is there an Add on XP Mode for Windows 7 Home Premium?

  I'm sorry, but there isn't.  Microsoft don't think individuals have this feature.

  You can use Sun's VirtualBox to install a licensed copy of Windows XP in a virtual machine.

• Is there a version of Photoshop elements for windows 10 14? My version for windows 7 & 8

  Is there a version of Photoshop elements for Windows 10 13? My copy is for Windows 7 & 8 and does not work on Windows 10.

  Have you tried to reinstall items, if it ran on the 7 and 8, it should work very well. If that doesn't help, you could do a right click on the file .exe and if he thinks it is running about 7 or 8.

• Money is debited from my account each month however creative cloud it says trial expired? I'm paying for Photoshop and Lightroom but cannot use them? Help!

  Money is debited from my account each month however creative cloud it says trial expired? I'm paying for Photoshop and Lightroom but cannot use them? Help!

  Your subscription to cloud shows correctly on your account page?

  If you have more than one email, you will be sure that you use the right Adobe ID?

  https://www.adobe.com/account.html for subscriptions on your page from Adobe

  .

  If Yes

  Some general information for a subscription of cloud

  Cloud programs don't use serial... numbers you, connect you to your cloud account paying to download & install & activate... you may need to sign out of the cloud and restart your computer and log into the cloud for things to work

  Sign out of your account of cloud... Restart your computer... Connect to your paid account of cloud

  -Connect using http://helpx.adobe.com/x-productkb/policy-pricing/account-password-sign-faq.html

  -http://helpx.adobe.com/creative-cloud/kb/sign-in-out-creative-cloud-desktop-app.html

  -http://helpx.adobe.com/x-productkb/policy-pricing/activation-network-issues.html

  -http://helpx.adobe.com/creative-suite/kb/trial--1-launch.html

  -ID help https://helpx.adobe.com/contact.html?step=ZNA_id-signing_stillNeedHelp

  -http://helpx.adobe.com/creative-cloud/kb/license-this-software.html

  .

  If no

  This is an open forum, Adobe support... you need Adobe personnel to help

  Adobe contact information - http://helpx.adobe.com/contact.html

  Chat/phone: Mon - Fri 05:00-19:00 (US Pacific Time)<=== note="" days="" and="">

  -Select your product and what you need help with

  -Click on the blue box "still need help? Contact us. "

• I have photoshop elements 2.0 for xp.  Is there a chance to use it for windows 8?

  I photoshop elements 2.0 for xp.  Is there a chance to use it for windows 8?

  Hi jerryoops,

  Photoshop Elements 2.0 has not been tested and is not compatible for Windows 8.

  Please consider buying the latest version 11.0 of Photoshop elements that is compatible with Windows 8.

• Why do I get the message saying: "there was a problem with windows, which caused it stop working properly.."?

  When I close the ms word document I have thi above message. -.

  Download updates for There was a problem with that caused it to stop working correctly. Your computer may run out of updates that can help improve its stability and security. Go online to search for and install the Important updates and recommended. Click here to access the Windows Update Web site online In the left pane, click check for updates. If updates are found, click view available updates. Select all important updates and then click install. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation. Note If you have activated the automatic update, you can not see important updates listed. If this is the case, the updates have already been downloaded to your computer. More information Please explain and help understand and solve the problem. To learn more about updating your computer, go to the Microsoft site and read the following article: Windows Update frequently asked Questions

  Hi nandiniatmasiddha,

  1. did you of recent changes on the computer?

  2. you only receive the error message when closing Word document?

  3. do you have security software installed on the computer?

  I suggest that you check and install the updates that are available on the computer, including Microsoft office updates and check if it helps.

  How will I know if my computer is up to date?

  http://Windows.Microsoft.com/en-us/Windows-Vista/how-can-I-tell-if-my-computer-is-up-to-date

  Updates: frequently asked questions

  http://Windows.Microsoft.com/en-us/Windows-Vista/updates-frequently-asked-questions

  If you still get the error message when the Word document is closed then I would suggest that you post your question in the forums of Microsoft office by using the link below.

  http://answers.Microsoft.com/en-us/Office/Forum/Word

• I installed CA secruity suite yesterday and evertime I try to open it, I get a pop up of microsft windows saying there was a problem and the program closes

  Yesterday I installed Security Suite CA.  It installs and everything indicates that it works correctly, but when I try to open a pop-up appears microsoft Windows telling me a pproblem occurred and the program stops, and then another pop up appears saying program closed and they send me a solution if there is

  Here are the codes I found impossible to repair... files should I copy the whole report or is it enough to make me help with this question?
  POQ 76 ends.
  2011-04-03 07:55:23, Info CSI 0000018e [SR] full Verify
  2011-04-03 07:55:23, CSI 0000018f [SR] components Info check 100 (0 x 00000064)
  2011-04-03 07:55:23, transaction Info CSI 00000190 [SR] beginning verify and repair
  2011-04-03 07:55:35, Info CSI 00000191 hashes of file Member \SystemRoot\WinSxS\x86_microsoft-windows

  -sidebar_31bf3856ad364e35_6.0.6002.18005_none_d0c824c923c9e622\settings.ini are not real file [l:24

  "{12}]" Settings.ini ":
  Found: {l:32 b:ntPb8a3owMmbzl2TXFHogrOTUqnXgzASIdBVmJptaGE =} expected: {l:32

  b:v6OQf2AJO5FVbRBJuIwXxkdkCoOaSk3y0ol6uTH491o =}
  2011-04-03 07:55:35, Info CSI 00000192 [SR] cannot repair the military record [l:24 {12}] "settings.ini" of "

  Microsoft-Windows-Sidebar, Version = 6.0.6002.18005, pA = PROCESSOR_ARCHITECTURE_INTEL (0), Culture neutral, VersionScope =

  1 nonSxS, PublicKeyToken = {l:8 b:31bf3856ad364e35}, type neutral, TypeName neutral, PublicKey neutral in the store, hash

  incompatibility of
  2011-04-03 07:55:39, info CSI 00000193 hashes of file Member \SystemRoot\WinSxS\x86_microsoft-windows

  -sidebar_31bf3856ad364e35_6.0.6002.18005_none_d0c824c923c9e622\settings.ini are not real file [l:24

  "{12}]" Settings.ini ":
  Found: {l:32 b:ntPb8a3owMmbzl2TXFHogrOTUqnXgzASIdBVmJptaGE =} expected: {l:32

  b:v6OQf2AJO5FVbRBJuIwXxkdkCoOaSk3y0ol6uTH491o =}
  2011-04-03 07:55:39, info CSI 00000194 [SR] cannot repair the military record [l:24 {12}] "settings.ini" of "

  Microsoft-Windows-Sidebar, Version = 6.0.6002.18005, pA = PROCESSOR_ARCHITECTURE_INTEL (0), Culture neutral, VersionScope =

  1 nonSxS, PublicKeyToken = {l:8 b:31bf3856ad364e35}, type neutral, TypeName neutral, PublicKey neutral in the store, hash

  incompatibility of
  2011-04-03 07:55:39, Info CSI 00000195 [SR] this element is referenced by [l:158

  "{79]" Package_16_for_KB948465 ~ 31bf3856ad364e35 ~ x 86 ~ ~ 6.0.1.18005.948465 - 49_neutral_GDR.

  Hello

  ·         This software provided by the ISP (Internet Service Provider)?

   

  Method 1:

  I suggest you to refer to the link provided below to uninstall and reinstall CA security.

  Step 1:

  To uninstall a program in Windows Vista see the link below.

  http://Windows.Microsoft.com/en-in/Windows-Vista/uninstall-or-change-a-program

   

  Step 2:

  Once you uninstall the program reinstall to install a program under Windows Vista refer to the link below:

  http://Windows.Microsoft.com/en-us/Windows-Vista/install-a-program

  Method 2:

  You can also contact the CA Technologies team for available updates or patches to fix the problem.

  http://shop.ca.com/ca/support/freeis.asp

• "Oops, there was a problem"-this copy of Windows 7 is not genuine

  I have a legitimate Windows 7 Professional OEM from HP. All of a sudden, out of nowhere, my computer had a message saying that Windows is not genuine, had a counterfeit Windows.

  I followed the link online to check: I am me page "Oops, there was a problem. The provided site solutions has been to buy a license of Windows 7 "authentic."

  I called Microsoft Windows Genuine Advantage number 1-866-530-6599 and said to my problem. I was transferred to another number: 1-800-936-5700. The line has been hung up. I had to call 1-866-xxx number again and explained my case.

  To cut a long story (more than 4 hours) short, he had something to do with corrupted data files. Windows tries to protect his 'real' - ness by running a few services to check it out. If it found that it was not the same as expected, windows you are running a counterfeit.

  I dug more myself. I found that the %windir%\ServiceProfiles\NetworkService\AppData\Roaming\Microsoft\SoftwareLicensing\tokens.dat was corrupted.

  In my opinion, the software developer wrote a sloppy code that does not cover the corruptions of situations caused by the loss of power. If something was wrong with the 'real' - ness, it be a forger accuse.

  Came in here, I did to fix my system:

  (1) open Internet Explorer

  (2) a browser will open, type:%windir%\system32into the address field

  (3) find the cmd.exe file

  (4) make a right click on the cmd.exe and select run as administrator

  (5) type: net stop sppsvc

  (6) type: cd %windir%\ServiceProfiles\NetworkService\AppData\Roaming\Microsoft\SoftwareLicensing

  (7) type: Rename tokens.dat tokens.bar

  (8) type: cd %windir%\system32

  (9) Move7B296FB0-376B-497e-B012-9C450E1B7327-5P-0.C7483456-A289-439d-8115-601632D005A0and

  7B296FB0-376B-497e-B012-9C450E1B7327-5P-0. C7483456-A289-439 d-8115-601632D005A0 on the desktop

  (10) type net start sppsvc

  (11) right click computer-> properties and activate

  (12) Windows 7 may ask you to enter a product key (use the COA SLP located on the sticker on the side or the bottom of your computer) and activate it. Use activation by phone method
  After reactivation, my Windows 7 shows "authentic."

  Had the same problem on my asus laptop after about 10 months of use. I can confirm that the validation works after re - enter the serial number and activation. Thanks for that.

• Problem open attachments in Windows Live Mail "there was a problem with the service Windows Live Hotmail (a matter of temporary network conectivity has nothing to do with your computer)".

  Hello

  In the last few weeks Im facing a problem when I try to open an attachment on my Windows Live Mail Im getting the following message: "there was a problem with the Windows Live Hotmail service (a matter of temporary network conectivity has nothing to do with your computer). Please try again. »

  Please let me know if I have a problem with my email account.

  Hello

  You will need to create a post on www.windowslivehelp.com for questions and assistance in connection with the Windows Live programs and services.

  In addition, take note of the error message that you are referencing, "...". "a network temporary conectivity issue has nothing to do with your computer.

• Guest account, that it was automatically added his self as administrator and my account has been defined as a standard user, now I can't delete the guest account and I can't change mine to the administrator

  When I added the account. It was automatically added his self as administrator and my account was created as a standard user, now I can't delete the guest account and I can't change mine to the administrator, what do I do?

  Hello

   

  1. How did you try to disable the guest account?

  2. What do you mean by "when I added the account was automatically added his autonomy as an administrator and my account has been opened as a standard user?

  3. who are you referring?

  4. what happens when you turn off guest account and change the standard user to administrator account?

  5. have you logged as administrator?

  6. you get any error message?

  Please follow the methods.

   

  Method 1:

  Follow the steps in the link.

  Enable or disable the guest account the

  http://Windows.Microsoft.com/is-is/Windows7/turn-the-guest-account-on-or-off

   

  Method 2:

  Activate the account administrator build-in, log on to the administrator account, and then create a new user account with administrator privileges and also try disabling the guest account from the administrator account.

  Check out the links.

  Activate the build-in the administrator account in Windows Vista

  http://support.Microsoft.com/kb/555910 (also applies to Windows 7)

  Try to create a new administrator account and check.

  Difficulty of a corrupted user profile

  http://Windows.Microsoft.com/en-us/Windows7/fix-a-corrupted-user-profile