a program of the disc loading is turned off

Similar Questions

• Computer froze cannot open any programs or even to use the Start button to turn off.

  Original title: the computer froze.

  Original title: my computer (Windows XP) has frozen. -Big problem -)

  Hello

  Last night, I used my computer to open a load of bunch of programs of MS Access (probably asked to run a marathon when he can only walk!)

  Now, I can't open any programs or even to use the Start button to turn off. How can I fix this problem or you have lost everything :-(

  Thank you

  Thanks - all of a sudden he started working again! Maybe this was a vacation - but I tried F8 and safe option is not come to the top.

  Very old computer - but it is useful to use to return to historical documents that I don't want on my new computer.

  Tnanks for the long and dedicated response :-)

• The new App Store for El Capitan update has locked up my macbook pro.  Reboot got about 3/4 fact and the machine stops. Turned off the power and turn it on again for nothing doesn't.  How in my machine to begin troubleshooting?

  The new App Store for El Capitan update has locked up my macbook pro.  Reboot got about 3/4 fact and the machine stops. Turned off the power and turn it on again for nothing doesn't.  How in my machine to begin troubleshooting?

  The problem is most likely an attempt to update a system malfunction prior it is probably a problem with your computer, not the El Capitan.

  Start by:

  Reset the PRAM and NVRAM on your Mac.

  MacIntel: Reset of the controller (SMC) system management

  Start in Safe Mode , and then re - start normally. It's slower that a normal start, so be patient.

  If you are unable to start;

  Reinstall El Capitan without erasing the drive

  Please make sure that you back up.

  1. Restart the computer. Immediately after that the chime hold down the command and R until the Utility Menu appears.
  2. Select disk utility, then click on the continue button.
  3. Select the withdrawal (usually Macintosh HD) entry of the volume in the list aside.
  4. Click first aid icon in the toolbar. Wait until the button is active, then click it.
  5. Quit disk utility and re-enter the Utility Menu.
  6. Select Reinstall OS X and click on the continue button.

  Also, see this tip for user: basic steps for the OS X upgrade.

  If this doesn't get you;

  Install Yosemite or El Capitan, from scratch

  Backup if possible before proceeding.

  Restart the computer. Immediately after the chime hold down the command and R buttons until the Apple logo appears. When the Utility Menu appears:

  Select utility disc in the Menu Utility, then click the continue button.

  When loading disk utility, select the volume (entered into withdrawal, usually Macintosh HD) from the list of devices.

  Click Delete in the main window of disk utility. A panel will fall.

  Define the type of Format Mac OS extended (journaled).

  Click on the apply button, then wait for the done button to activate and click on it.

  Quit disk utility and re-enter the Utility Menu.

  Select reinstall OS X and click on the continue button.

• license on the old PC to turn off and turn on the new PC, or unlock.

  In June 2016, I installed 6 Lightroom on my old PC to get. After about 1 1/2 months, adopted throughout the system and I had to get a new PC.
  
  All the programs have been installed on the new PC also Adobe Lightroom 6. When you start the program, the message this program or this serial number is still active on another PC.
  
  Like the old PC cannot be brought back to lifeI ask you the license on the old PC to turn off and turn on the new PC, or unlock.

  You must contact Adobe.  This is a user to user forum.

  Use the chat here:

  Contact the customer service

• Had cracked screen but the phone works still. Today screen is become white, and the phone rang again.  Did hard reset and now the phone is completely turned off and will not be exposed - not even the Red of the battery is displayed

  Had cracked screen but the phone works still. Today screen is become white, and the phone rang again.  Did hard reset and now the phone is completely turned off and will not be exposed - not even the Red of the battery is displayed

  He broke. Make an appointment at the genius bar and get it fixed / replaced. There is no magic words that will do well.

• just installed thinkpoint... now, the computer does not turn off

  Hello

  Downloaded thinkpoint... now the computer does not turn off

  never had this problem before.

  Hello

  Downloaded thinkpoint... now the computer does not turn off

  never had this problem before.

  ThinkPoint can be a virus, google for info also run superantispyware and av prog.

• I'll go the Mac of the victory, I can turn off my Adobe products in Win and turn them in Mac?

  I'll go the Mac of the victory, I can turn off my Adobe products in Win and turn them in Mac?

  Lars-Olof

  It depends on what products are - can tell you which?  If they are products of creative cloud then Yes, you can use either platform (or both) for a subscription to creative cloud.  If they are produced Creative Suite, so it becomes less likely.  If they are produced CS6, you can request a one time platform swap.

• Hi I was doing a tutorial on spllcing images and am confused. He told me go to the windows tab and turn off the application framework. I can't find the application framework on the windows tab? I need to change a setting, or something

  Hi I did a tutorial on the splicing of images and I'm confused. He told me go to the windows tab and turn off the application framework. I can't find the application framework on the windows tab? I need to change a setting, or something

  Hi, Yona,.

  The application is available for Mac machine and not a windows machine.

  Concerning

  Rohit

• What programs from Task Manager windows peux turn off to improve performance?

  I would try to speed up the newspaper at the time, seems a bit slow, it seems that something is running in the background at startup, do not know how to find out what it is.

  Also can I turn off all windows task manager of programs to increase performance?

  Windows key + R--> type:
  Msconfig
  See the Startup tab for everything that loads the startup/logon.  Then determine which ones that you don't need and learn how to permanently change their settings through their own configuration and/or manual change.

  Everything in the Task Manager is what you see when you look through the Startup tab - as well as everything you ran manually or startup items for you.  It's just to show you what is running.

  What are the characteristics of your machine in general?  Processor (brand, speed, number of cores), amount of system memory, amount of video memory (and if it is shared) and what your specific operating system?

• NB550D boots in black of the screen and cannot turn off even

  I had my NB550D for only less than a month. I've updated the memory to 2 GB and the Op to Home Premium system, but nothing else. It's on auto update on security issues, and I remained with the McAfee protection which was pre-installed (and paid for a year).

  All is well until a few days ago when you turn on, I just got black screen. Could hear the fan and disc well. Finally pressed the power button, nothing changed, has waited a bit, pressed again and it is off. When I pressed once again he came as usual. Used several times in the last two days and has been very well. Now today I get black screen again and can hear the fan. When subsequently, I pressed switch, I heard snoring disk but still black screen. Since then, tried pressing on/off switch from time to time but no change at all - can't turn off!

  Anyone has any suggestions please?

  Flingel

  I read in another forum that the answer must take the battery (having already taken the sector) so it will die and then press on and press and hold power for 30 to 60 seconds. I had nothing urgent to do let him die naturally when the battery is missed rather than take out the battery when it was on. Then, I held the power button for 60 seconds, plugged in and turned on. It starts very well now, but of course I don't know a) the question of whether it is because I held the power button in 60 seconds and b) on the question of if same thing will happen again, so if anyone has experience of this behavior, I would be grateful for comment.

  Thank you

  Flingel

• 23 Pallvion all-in-one: the Logo screen then turns off 10 Windows

  I have upgraded to Windows 10 awhile ogo and so far my computer was working fine. Then, I came across a virus if sort so I decided to simply reset my computer. When I tried to reset it, it would be stuck on 1%. So, I then turned my computer off and when I turned it on the logo appeared for about 15 seconds and then turns off. I almost tried everything. I t doesn't let me not reset again without a disc I don't have. And it says there is an error when I try to refresh the pc. I'm stuck and need help fast!

  I didn't say it was the only way, but the most logical.  There are other choices.  You can use the set of diskettes of recovery that you made when the computer was new.  You can use a borrowed from Windows 8 or 8.1 Windows installation disk, but it would be necessary to match the windows that came from HP that was installed.  You could buy or borrow a disc 10 Windows installation to run.  On this day and the social environment, it is rare that you do not find a friend to do the free Windows 10 disc for you, however.

  If these choices do not meet your approval, then I guess there is a problem.

• Error: ' Service Pack has not been installed. Restoration of the changes. Not turn off not computer. "unable to install Windows Service Pack 2."

  Original title: cannot install Windows Service Pack 2.

  I tried to install Windows Service Pack 2 and you know how when you lock your laptop, it's how he like to appear. Service pack filed to install, so now have him, he said, 'Service Pack was not installed. Restoration of the changes. Do not turn off computer. "I'm not going to let me at all to connect to my computer... Alls for this is restarts by itself and when it turns on, it says the same thing. I already tried to remove the battery and leaving out the laptop for a little while and then when I put the battery in and re - turn on the laptop, it says the same thing and continues to do exactly the same thing and I'm getting really aggravated and crazy. Is there anyway that I can fix it without going through a computer technician?

  Hello

  Have you been able to successfully install the other updates?

  If you have the Windows Vista installation disc, follow this link and check if the problem persists:

  Error: Failed to setup of the Windows updates. Restoration of the changes. Do not turn off your computer when you try to install Windows updates

  See: How to troubleshoot Windows Vista and Windows Server 2008 service pack installation problems?

  Learn how to install Windows Vista Service Pack 2

  Hope the helps of information.

• How to remove run as administrator when the box is already turned off?

  Hello

  For complicated reasons, I put a program runs as an administrator, by checking the box in the properties.
  Solved the initial problem, but then the program has had an update and now I need to run normally to solve the problem. This is why I don't want the program run with elevated privileges.
  I went back to the properties and unchecked the box, but in fact nothing has changed: the shield appears always in the corner of the icon of the program, I always wonder confirmation whenever I run the program.
  When I return in the box properties is displayed unchecked so I can't UN check new.

  I tried:

  Box uncheck 'run as administrator' in the tab 'change settings for all users.

  Restart

  Deleting the files local and re - install

  I am running Windows 7 family Premium-64 bit, with a single user (admin).

  What is going on?

  For reference, the reason I want to remove admin privileges is that this program is supposed to run at startup, but high blocks UAC with privelidges startup programs.

  Thank you

  Andreas

  Then, they are different versions of the same program.  If it's the shield, it is programmed by the developer to require administrative rights.  You can enable each time with the UAC dialog box (or you can turn off UAC to keep everything running as an administrator all the time, obviously not recommend).  In otherwise, know if you install a hotfix or update the program, because only the person or the developer who built it can change the programming.

• Windows stops but the laptop will not turn off or to sleep.

  Hello

  I have Hp Pavilion dv6-6120us and recently I noticed that windows 7 is off but my computer stays, the hard drive fan and lighting too, if I put my computer to sleep it won't wake up I have to hold the power button / 10 seconds, and then restart the computer. I uninstalled all the programs that are not needed and also uninstalled my virus protection, I have run the disk cleaner, fix the registry and ran a virus check and malware and no problem, I also ran a check air that comes with my Hp system and found no problem. I already turned off all controllers usb, video card, sound card, network card and still no luck, also on the safe mode, the custom of the computer turns off. I also ran msconfig and disabled all the startup programs, services, and still no luck. I uninstalled all updates of windows too and still have the same problem, any help, I'll take thank you.

  Hi Yemel,

  This question could be either software or hardware partners. Start safe mode and check if you can close properly.

  Method 1:

  Step 1:

  Safe mode is an option of troubleshooting for Windows that starts your computer in a limited State. Only basic files and drivers needed to run Windows are started. Mode safe mode appears in the corners of your monitor to identify which Windows mode you are using.

  Start your computer in safe mode

  http://Windows.Microsoft.com/en-us/Windows7/start-your-computer-in-safe-mode

  Step 2:

  If the problem does not persist in Mode safe then the problem may be due to a third-party program/application. To determine which program or application is causing the problem, try to place the computer in a clean boot state, and check.

  Place the computer in a clean boot state, then check if it helps. You can start Windows by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts.

  How to perform a clean boot for a problem in Windows Vista, Windows 7 or Windows 8

  http://support.Microsoft.com/kb/929135

  Note: Follow the section 'More information' to reset the computer to start as usual after a clean boot troubleshooting.

  Please refer to:

  Solve problems with sleep and the night before extended Modes (Windows 7)

  The problems of wake the computer from sleep mode

  Note: changing the BIOS settings can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the configuration of the BIOS settings can be solved. Changes to settings are at your own risk.

  Please post with the State of the question so that we can help you.

• Dell PC randomly freezes and now require the power button to turn off

  original title: PC freezing

  My old DellPC of 11 months has started to freeze. Use the power button / stop to turn off. Once it will not re-start twice it turned off my Mcafee security.

  1. Uninstall Mcafee. Install something else like program AV from Microsoft.

  2. start in safe mode / networking. Install the Microsoft AV program, update, then scan the entire hard drive