A set of keys on multiple Machines?

Similar Questions

• SRM (5.5) Test failover fail to power on multiple machines

  SRM (5.5) Test failover fail to turn on several machines withSRM failed to Test failover to power on multiple machines with the error - the timeout of waiting for VMware Tools after 300 seconds operation: 900 seconds timeout of waiting for VMware Tools after 300 seconds operation has expired: 1200 seconds operation exceeded: 1 200 seconds.

  Note: the virtual machines have updated the VMware ESXi host (protected site and recovery) tools running on the same build version.

  Here since the vmware tools are the heartbeat of VM (guest OS must load and send a heartbeat) to avoid this overall, you can also uncheck under option, so the vmwaretools would not wait and loads successfully.

  Right-click the virtual machine in the stimulus package and select Configure.

  Go to the Start Action > Power On > wait for VMware tools.

  Or as the only option to get out of this recommendation is to increase the timeout value, however it has been confirmed that this behavior is that during the test above fail and real failure during work very well even if does not meet any specific setting.

  Steps to change the time-out value:

  Right-click the virtual machine in the stimulus package and select Configure.

  Go to the Start Action > Power On > wait for VMware tools.

  Change the default value of 5 minutes to 15 minutes.

  .

• How to configure the print server on multiple machines?

  Hello
  
  Can you get it someone please let me know the installation process of print server on multiple machines?
  That's what I thought.
  1. install Ghostscript on all machines.
  2 configure the print server on all machines.
  3. I guess I should point the IP address somewhere as a final step?
  
  Thanks in advance
  PM

  The steps you mentioned is correct.

  When you configure the print service, you can set the URL of the web application server financial information in .properties and this file will get stored in the HSS registry (this is the step where you run the FRprintserversetup.cmd). So when you run Setup of each print server there will be created for this purpose in the HSS registry entries. Then, there will be an internal logic that will work on what server should take what process.

  THX

• How can I find setting up key for player blue ray Toshiba as an Extender

  Just bought a blue ray Toshiba BDX5300KB player. When I try to add extender for windows media Center, it asks the figure 8 set up key shown on the TV screen - my TV screen shows nothing! Where can I find this key?

  depends on your TV, if it supports play at, you have a few options. But
  without an Xbox 360, which is the only Extender, you will not be able to stream
  live. some recorded tv CAN run using play.
   
   
  Barb
   
  MVP - Windows/entertainment and connected home
   
  http://digitalmediaphile.com/
   
  Please mark as answer if that answers your question
   
   
   
   

• How to set the key numb to activate at startup

  How to set the key numb to activate at startup on computer laptop gateway running windows 7?

  Original title: numb locking button

  Hello Wan,

  Thanks for the quick response. We appreciate your time and your efforts.

  By default the NUM LOCK status is the same as it was before you shut down the computer properly. If it is on when you shut it down it will be on when you turn on the computer again.

  A few users have solved this problem by disabling fast boot option in the BIOS (Basic Input Output System). I would ask disable youFast Boot to the BIOS and check if that helps.

  For more information about how to disable Fast Boot in the BIOS, I would ask you to contact the manufacturer of the system.

  Note:

  BIOS change / semiconductor (CMOS) to complementary metal oxide settings can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the configuration of the BIOS/CMOS settings can be solved. Changes to settings are at your own risk.

  Hope the helps of information provided. Let us know the results and do not hesitate to post on the Microsoft Community, in case you have problems when you are working on Windows.

• "No devices found, startup click on any key to restart Machine." & "audit of the media [impossible]. & ":( Your PC of Ran into a problem & needs to restart. "Error messages occur every hour.

  Hello

  I was browsing the web when suddenly an error message came up saying ": () your PC of Ran into a problem and must restart." We are only collecting the error information, and then we'll restart for you (0% complete). If you want to learn more, you can search online later to this error. KERNEL_DATA_INPAGE_ERROR"then he gave a black screen and says"Checking Media [Failed] ". Then he showed the logo Dell my computer, (the usual start screen), and then the screen disappeared. About 5 seconds later, another black screen (just like the "[Failed] Media Control" screen came saying "No Boot Device Found, Click Any Key To Reboot Machine".) I follow on the orientation of the screen for about 5 minutes and it kept giving me the same screens over and over again, no change there view. So I turned off my laptop, waited 30 seconds, back running the computer and he gave "[Failed] Media Control" Message twice, he disappeared and the Dell splash screen came again, he let me not log my computer as usual. This happened to me twice now, and it's extremely frustrating, because now I can't be on my computer for more than a half hour at a time without him doing this again. Also I can't scan the computer for viruses, it's 15 minutes to finish scanning and I get the message 'PC Ran into A Problem'. Can someone please help me understand why this is happening? Very much appreciated.

  -Austin screw

  Hello

  I apologize for the late response.

  What is the current status of the issue?

  Unplug all external devices connected to the computer except the mouse and keyboard and check for the issue.

  I also suggest you to start the computer in safe mode and check.

  Start settings for Windows (including safe mode)

  http://Windows.Microsoft.com/en-us/Windows-8/Windows-startup-settings-including-safe-mode

  KERNEL_DATA_INPAGE_ERROR error code indicates that the data page of the kernel of the required paging file cannot be read into memory. It could have happened due to graphics card drivers.

  Bug CRITICAL_PROCESS_DIED control has a value of 0x000000EF. This indicates that a critical system process died.

  See also:

  Bug Check 0x19: BAD_POOL_HEADER
  http://msdn.Microsoft.com/en-us/library/Windows/hardware/ff557389 (v = vs. 85) .aspx

  If you are able to start the computer in safe mode, we need to collect some newspapers of the dump files created to analyze.

  Hope this information helps. Response with status so that we can help you.

• Set a key to refer to an element

  Hello

  As far as I know, in a map, you can set a key to refer to a topic:

  < keydef href = "Concepts/c_access_control_policies.xml.

  keys = 'access control policies' type = 'concept' > < topicmeta >

  political access control < navtitle > < / navtitle > < / topicmeta > < / keydef >

  For all subjects, that's fine: I can then use they key "access control policies" whenever I need to refer to this subject.

  However, I would like to be able to reference an element within a section. For example, to have a section that lists all the clauses and phrases; each of these elements would have unique ID etc. In the plan, I would then create keydefs to refer to these elements. So far, I was unable to do so.

  I can easily create references to these terms and phrases through conrefs, but whenever I want to create a conref, I have to go through the process of localization of the file etc. I would have thought that the keys would be easier.

  Any help gratefully received.

  Peter

  Hello

  For references to themes, cards and non-DITA resources, the value of the @keyref attribute is simply a key name: = keyref 'key topic'. However, for references to the elements non-sujet in the subjects and non-topicref in cards, the value of the @keyref attribute is a key name, a forward slash ("/") and the ID of the target element: keyref = "topic-key/some-element-id"

  For example, consider the matter in the document 'file.dita ':

  Some content.

  And this key definition:

  href = "file. DITA "/ >"

  A form 'myexample/para-01' keyref decides of the

  element in the section. Let me know if I understood your question.

  Kind regards

  Ajit

• The current license is outdated, please make it easier for users to have multiple machines.

  MUG SHOT *.

  I do not know the suites old (installation DVD) used to allow install on 3 machines?

  the limit of 2 machines just isn't more practical.

  I don't know that I'm not the minority with a studio Mac a Mac home for these 2 changes in the morning and a laptop computer for the concerts at a distance?

  I love CC and don't expect unlimited access, it would be more logical if we could install on multiple machines, and the all-seeing cloud kept tabs where it was running (as in the good old days)

  «You can't run this because its already open on ip 123.11.12.» bla. »

  And yes I know I can turn off, but it is currently a solution very clumsy.

  RANT OVER *.

  Hi,

  CC Adobe license can be activated on 2 machines using the same Adobe ID using only 1 at a time.

  Reference: licenses and terms of use | Adobe

  Kind regards

  Sheena

• Setting permissions on a virtual machine

  We run a VM hosting service. I wrote scripts to create, delete, and update virtual machines. The problem I have is setting permissions on a virtual machine. We have groups Active Directory (AD) for the management of the permissions on the virtual machines. I am able to manually add these ad groups tab permissions on a virtual machine using the vCenter console, but I could not describe the process. We run 5.0 vCenter. Any help would be greatly appreciated!

  Hi B

  Assuming that you do not have many ads with replication issues Sites / ore something latency... maybe this could be a problem:

  In my script I user QAD Cmdlets... as I wrote this powershell script was without value 'default' - module

  It might be the QAD Cmdlets to return the other default strings them from Microsoft.

  I suggest you play with this line in order to get a response... I'm not able to test this now... excuse... :

  $perm.principal = $mrdgrp

  # Does 'primary' eventualy implies PrincipalName? Something like:

  $perm.principal = ' VMCA_group_name@C***. EDU'

  # Or second try...

  "$perm.principal = ' C * \VMCA_group_name.

• Installation of the code on multiple machines registration keys

  Hey guys,.

  Am a newbie in this forum. I had generated code signing keys on a single machine, but this computer is broken now. Is there a way I can use the same .csi files to generate keys on another computer?

  I get an error message when I try to save files .csi from another computer.

  Thanks in advance.

  your jde bin directory

• Firefox 4.0 than flash menus as a key on the keyboard is pressed. Can not access even with all the plugins turned off. Same issue on multiple machines with different versions of Windows. How this can be solved?

  FF 4.0. Flash menus such as a key is maintain pressed making it inaccessible. The problem persists with all the plugin disabled. Firefox box top left appears. The old logo FF show instead.

  Fact to uncheck use hardware acceleration helps in the Firefox menu > options then in the window of Options - Advanced tab > uncheck the box 'use hardware acceleration when available' stop the problem does not happen.

  Advanced panel - accessibility, navigation, network, updates, and other advanced settings in Firefox

• How do I set up and add multiple computers to a HD post I will use time machine?

  Hello, I'm about to upgrade an external drive 1 TB WD to 4 WD to My Cloud drive that has a USB 3 and an eternal Gigabit port. Also, I use a 6 yr old airport extreme router to connect to. I have two MacBook in the House, I want to connect to it for backups. I'll have to just about 1 to for one of them one 2 TB for each other, leaving free 1 TB so I need to partition the drive.

  It doesn't seem to be on that statement with WD, can someone advise where to look for the answer to give me a solution?

  See you soon

  Chris

  Partition the hard drive in 4, connect to each computer in turn.

• Vocals and guitars/keys using multiple output

  Hello

  I intend to play a CONCERT with MainStage 3 this weekend, and I'm trying to find a way to make it work. I sing and play on the keys or on guitars. I add a few effects on channel strips in the. I know I could put just outputs of the channels output material, but this will not cause me not to hear anything.

  If question 1.
  Is it possible to send a string to two independent outputs? for example 1-2 (as my monitor) output and 3-4 for the console?

  If not, question 2
  The other way, I'd do is just send it to THE then set out ancillary differently. Then the question would be - how to send it to the pre fader? So change me the volume will not affect what I'm doing on front

  If you like my so that you got through questions, there is another question asking why my voice sounds like the choir in my ears (as if there are two entrances with a latency, when there is one) I posted it yesterday, but nobody answered yet

  Hello

  "I know I could put just outputs of the channels output material, but this will not cause me not to hear anything."

  Why you say that? Who should produce sound...

  But let´s okay focus on your question.

  Use option 2 - create a channel at concert level and name such as keyboard and output than your 1/2 material on and do as well send you want.

  To choose the post pan, fader pre or post fader, just wait click in the shipment, and the options displayed.

  

  Hope this has helped you.

• I have my time capsule for base station; How do I set up just for Time Machine?

  For several years, I have used Time Capsule as a wireless base station more backup Time Machine. I back up a Macbook Air (single user) and iMac with 2 users (two computers running on OS X 11.5). With Comcast Xfinity I need is more like a base station. In fact, I reset my router Xfinity name and password to replicate what was the name and the password to my Time Capsule network. But, now that it's done I can't understand of set up time capsule without set it up as a base station. The installation guide seems to suggest that I could do so by plugging the ethernet cable from the modem to an ethernet port which is not the WAN port. But this configuration did not work. The installation wizard only took me the steps to set up a wireless network. How can I simply we it with Time Machine as an external hard drive?

  The installation wizard only took me the steps to set up a wireless network. How can I simply we it with Time Machine as an external hard drive?

  Simply turn off the time Capsule wireless.

  To do... Open AirPort Utility, click on the Time Capsule, then click on modify in the window that appears

  Click on the Wireless tab at the top of the next window

  Change the setting for the Mode of network on 'Off '.

  Click Update to save the changes

  

  But... and this is a big BUT... This work of pourrait ... and maybe not. Even if the backup on the Comcast network seems to be working, there will be no help from Apple in case of questions or problems of backup.

  The reason is that, so that your Time Machine backups be supported officially by Apple, users must save on the Time Capsule wireless, or connect their Mac (s) directly to one of the three ports LAN <>- on the Time Capsule using a wired Ethernet cable connection.

  If you decide to try the method of failure to load, please let us know how things work after a few days.

• I would like to add a folder of photos on a USB key for time machine backups

  I have a new time capsule, and I am attaching a USB hard drive that previously held some my time machine backups and all my photos. I would now add the photo of backups auto time folder machine on the time capsule. But in time machine preferences I don't see the folder or the USB key. Although I can see the USB in the finder as well as the time capsule window. I can copy and paste the photo time capsule file it's just I wanted to time machine for backup for me. Any help much appreciated.

  The time Capsule is what we call a 'network' of the road, so when the USB is connected to the time Capsule, which would make it a "network" drive as well.

  Unfortunately, Time Machine is unable to back up a 'network' of the time Capsule drive.

  If you want to save the data or the USB disk using Time Machine drive, you will need to connect the drive directly to your Mac and then it will be saved with your Mac... assuming that the drive has been formatted for Mac to Mac OS extended (journaled) format. Then, the player will become a "local" drive

  If you need to keep the USB connected to the time Capsule, the only way to back up data automatically on a schedule would be to use a commercial program like Carbon Copy Cloner or ChronoSync.