A straight vertical line appears on my painting when I try drawing

Similar Questions

• Blue vertical line appear on the screen of the series M Satellite

  I had a blue vertical line appear on my screen its about inch thick and is at - it start, can someone tell me if I can get rid of him? Thank you.

  Hello

  If this blue line is present from the first second after turning on the laptop that I presume it's because of the faulty graphics card. To be sure try to connect an external display to see the same thing will happen. If Yes, it is the evidence that this line occurs due to faulty hardware.

• Satellite P30 - three vertical lines appeared on the screen

  I have a problem with the display on my p30 110 three vertical lines appeared on the screen, the pc has been scanned with three different antivirus programs and seems to be clean any suggestions would be helpful

  Hello

  These problems usually occur due to a malfunction of the equipment.
  But have you tried to update the graphics driver. If this isn't the case, so I recommend to do.
  The update may solve some problems.

  However, if vertical lines persists then you should ask Toshiba service for assistance.
  He must check the laptop.

• Yellow vertical line appears on Satellite Pro

  My machine is 18 months old. Last week a thin yellow vertical line appears on the monitor approximately one third of the left side. Tonight a thin purple line appeared about 1 cm to the right of the yellow.

  Any ideas what causes this and how can I get rid of him?

  Hello

  You you connected the laptop external monitor to check if the lines appear also on an external display? If this is not the case, check it.
  If the lines appear on the second screen, so I suspect it s a malfunction of the motherboard (graphics card).

  In this case, you do not have many ways to solve. For the most part a replacement is necessary.
  According to your message, sure the laptop is 18 months, so usually the guarantee should be valid if you have registered on the page of Toshiba notebook.
  The standard warranty covers the laptop for 12 months and after registration, you have a 24 months warranty coverage.

• My phone has a gray spot and he goes but he always comes back and my phone is bulging commandeLorsque I try to push to vertical lines appear so I can't push

  My phone has a gray spot and he goes but he always comes back and my phone is bulging commandeLorsque I try to push to vertical lines appear so I can't push

  Is that an iPhone 5? If so, you may have a battery of swelling which pushes the screen and that may have caused damage to the screen.

• a pink vertical line appeared on my screen

  A thin pink vertical line appeared on my screen. How can I get rid of him. I tried the obvious bases.

  You probably have a line of dead or stuck pixels on your LCD screen. There are programs that carry out the display of this bike through various display models and some people recommend massaging where the pixel stuck watch manually.

  Video exercise programs show some real promise, but I'm not sure a lot of the other supposed fixed. Personally, I think that many of these patches are as a cure for sneezing that they are no longer for the laugh of the person who provided the remedy in the interest of the person in arrears by sneezing. In addition, if the pixel has become unstuck, you can always ask success.

  Use Bing or Google to find dead pixel and you will get a multitude of solutions thrown your way. Exercise video display may be worth trying.

• My normal short clip in the timeline panel. When I hit the break, vertical lines appear. The lines are also exported. Why?

  My normal short clip in the timeline panel. When I hit the break, vertical lines appear. The lines are also exported. Why?

  Found an answer online. Here it is:

  I also want to mention that if you disable your GPU acceleration and use the software only mode the question should stop. It seems to affect only when the GPU acceleration is turned on.

  Go to file > project settings > General and only software switch.

• Volume control does not appear on the screen when I try to activate it. This has never been a problem until now. How can I get this working again?

  The volume control is located at the bottom right of my sidebar it me has not given any problems so far. Now, he just will not appear on the screen when I try to call. This has never been a problem before. I really did something to screw things up (again!) today. This is the first time I had this problem.

  Next time please indicate what opersting system you first use before describe you your problem.

  You can start by doing a system restore. Choose a date on which your Volume icon in the taskbar.
  http://www.howtogeek.com/HOWTO/Windows-Vista/using-Windows-Vista-system-restore/

  If for some reason it does not restore the Volume icon, then...

  For Vista, use this tutorial:

  http://www.Vistax64.com/tutorials/106787-notification-area-system-icons.html

  You can try a method first. If the Volume box is grayed out (is usually), go to method 3.

  2. for the Volume icon

  To activate the Volume - icon Enable_Volume.reg< click="" to="">
  Then, follow the instructions from #5 to #9.
  Make sure that you restart the computer to complete the process.

  For Windows 7, use this tutorial:
  http://www.SevenForums.com/tutorials/19085-system-icons-enable-disable.html

  Go directly to the Option two

  9. to activate the Volume icon

  (A) click on the download button below to download the file below.

  Enable_Volume_Notification_Icon.reg

  then follow the instructions from #11 to #15.

  Make sure that you restart the computer to complete the process.

• The gray vertical lines appear on the bottom screen shots

  Hello

  Vertucal gray lines appear on the few photos that I took to be painted. They appear not in the Photos, but only when they are displayed as background pictures. It happens on every image but some a few, I can't work on any model! Any help would be appreciated!

  Photo for example is attached.

  See you soon

  

  You see the same problem, if you export the photo (file > export > export original) and then set the photo as the desktop to a folder in the Finder and not directly from your photo library?

  Preview shows also the photo with band objects?

  If you can see objects only when display as an image of the desktop, try the same from another user account - sign in the guest user account and set the image of the Office here.

  If the guest user account shows the same objects, restart your Mac in safe mode.  What is going on?

  See this link: Mac OS x: Safe Mode boot

• HP envy smart-touch j 15: display vertical line appeared in the Middle

  How can I solve vertical line has appeared in the middle and color of windows seems also dimmed

  Dear customer,

  Welcome and thanks for posting your question on the Forum of Support HP

  It seems that you are having problems with your laptop display. We will surely help you with this problem

  1. Please check if the display screen / laptop showing lines even in BIOS or not

  Note: Turn on the computer laptop and typing on the F10 key to access the BIOS

  2. Please tilt the laptop display slowly to the back and the front, check and check

  If the lines are visible to all the corners of the screen

  3 Please connect an external monitor to your laptop and check if the lines appear even on the

  external monitor

  Hope this helps, for other queries in response to the post and feel free to join us again

  * Click on Thumbs Up white on the left to say thank you *.

  Make it easier for others to find solutions by checking a response "Accept as Solution" if it solves your problem.

  Thank you

  GBL84

  I'm not an employee of HP

• White vertical line appeared on the screen.

  A vertical white line appeared about 3 inches from the left hand side on my Dell Studio 1749.  It started about 1 mm wide, but increases in width and is now about 4 mm wide.  There is no problem on an external monitor when connected.

  Is this likely to be a problem with the Panel or a chip problem?

  Thank you.

  Yes, probably would have worked, but I just replaced the screen in the end.

  Thank you

  Ian

• Tecra M2: Vertical lines appeared and cannot go beyond the Toshiba screen

  I was watching a movie on DVD WIN and froze my TECRA M2 I restarted, I noticed blue vertical lines on the windows on the screen, then the loading screen went white, I restarted the pc and it Gauthier go beyond screen black screen of toshiba. Some people told me that it is the other HDD VGA. What do you think?

  Hello

  For me, it certainly looks like the graphics card failure!
  It's really bad, because for the most part to the whole motherboard must be replaced! :(
  But to be 100% sure the diagnostic test is necessary.

  I think you should contact the ASP in your country. Guys to explain the situation and ask for clarification.

  Maybe your warranty is valid? In this case all replacements would be FRO free!
  Usually the guarantee must be valid for 24 months if you have saved this notebook on the Toshiba page.

  concerning

• WINDOWS XP STARTS TO LOAD. STOPS LOADING AND VERTICAL LINES APPEAR ON THE MONITOR. LAST DAYS ONLY. CAN NOT USE COMPUTER.

  WHEN STARTING MESSAGE BED WINDOWS HAS STOPPED UNEXPECTEDLY. GIVES A LIST OF POSSIBLE CAUSES AND IF APPLICATION WINDOWS TO START NORMALLY. THEN IT STARTS AND LINES APPEAR ON THE SCREEN. HELP PLEASE... ALSO WORKS WITH SP2

  WHEN STARTING MESSAGE BED WINDOWS HAS STOPPED UNEXPECTEDLY. GIVES A LIST OF POSSIBLE CAUSES AND IF APPLICATION WINDOWS TO START NORMALLY. THEN IT STARTS AND LINES APPEAR ON THE SCREEN. HELP PLEASE... ALSO WORKS WITH SP2

  =================================
  Looks like you may have a type of material
  failure, but the following article may be worth a visit:

  (307852) how to start your computer using the
  the last known good Configuration feature
  Windows XP
  http://support.Microsoft.com/kb/307852/en-us

  Volunteer - MS - MVP - Digital Media Experience J - Notice_This is not tech support_I'm volunteer - Solutions that work for me may not work for you - * proceed at your own risk *.

• Wavy vertical lines distort up and down when I use the scale to the size of the frame in CS6

  In recent days, while I import images HD to SD comp and use the scale to the size of the image now I have these wavy vertical lines at the bottom and the top (instead of black). I have a problem when images are suspended, when I play it's ok, and also the problem appears when I export images. I have to reduce my images manually in some 62% and then it's just the way it should be.

  See the image below (to LEFT - when I read my clip, RIGHT - when it is paused)

  

  This bug should be fixed in the next version of NVIDIA. Try to restore the previous version of the driver.

  Peter Garaway

  Adobe

  Premiere Pro

• Z5200 PS: white vertical stripes appear of some graphs when printing posters - Z5200PS

  When you generate posters in MS Publisher or MS PowerPoint sometimes a graphic placed on the page will create a white band of non-printing the image width from the top to the bottom of the page.  The only printing in this range is the image.  Not all images have this problem.  The white band does not appear in the image or preview before printing in the program.  The white stripe appears only in the preview before printing HP and on the printed poster.

  This has happened with several posters, but not all.  The images associated with the banding have been removed and the white band is deleted.  The images will be edited, resized and otherwise modified but still liaising with the band.

  A poster done with MS Publisher that produces the white vertical stripes with a few images when printing to the HP Z5200 PS is saved in Adobe Acrobat.  The Acrobat screen image is OK.  In Acrobat print preview is fine.  But when generating the preview before HP Print or print, the white vertical stripes in the graphics display.

  I tried everything I can think of.  Posters of MS Publisher look OK on the screen.  The problem occurs only when printing or using the preview feature before printing HP for the HP5200.  The files printed without this problem on our old printer large format of 500 HP.

  Any suggestions on the cause or solution?

  Thank you.  Your suggestion has provided a fruitful work around.

  The PDF file was the same problem that the Presenter MS leader had.  Due to the size of the MS Presenter file, error messages have been generated when trying to convert it to a JPG file.

  But, I went back to the PDF of the MS Presenter file and used Acrobat Professional to convert it to several image formats and attempted to print the PDF file of the file MS Presenter image format.  It worked.  It's a very winding road, but it has provided acceptable results.

  Thanks again.