a1720n cannot start after the installation of the DVD from LG GGC-H20L drive

Similar Questions

• Cannot start after the blue screen "page in the nonpaged area failure."

  My sons laptop has got to me.  There the error page blue to come with "failure page in the nonpaged area." There is a chain of technical info of numbers, but this changes a little at each attempt.

  I tried all F8 options, without success.  I did a restore disk from the laptop of my other son (which is the same) and that has not worked and I also downloaded a file of system restore on the internet who do not.  I ran diagnostics memory on the scope option and who found nothing.

  No matter what I try, always the fails to start after the first screen with Microsoft Corporation at the bottom and the small lights of scrolling!

  I would be grateful for any suggestions that anyone can have.  I wondered if I should try to borrow a disc of Windows Vista from someone and try from there?

  Read the messages and follow the procedures established by the MVP of the spirit in the following thread on the Blue Screen of Death.  They should help you solve your problem. http://social.answers.microsoft.com/Forums/en-US/vistahardware/thread/8cd8362e-7d06-46fb-afd7-84d54b6a8ea7.

  I hope this helps.

  Good luck! Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Cannot start after the formatted NTFS partition

  Option to boot OS X suddenly absent after that I formatted the partition NTFS (bootcamp) of Windows installation.

  

  I read many previous question in many Web site and

  I tried to fix it in disk utility, but it cannot go up more.

  user mode single launch I tried, but it does not start.

  already reset NVRAM and SMC.

  Is there not any solution to start again or access my files in the partition mac to back up?

  Thank you.

  Somehow, you managed to format your OS X with making it unusable NTFS volume. I recommend you do the following:

  Clean Install of El Capitan

  Restart the computer. Immediately after the chime, press Command + Option + R until a globe appears.

  The Utility Menu appears in 5 to 20 minutes. Be patient.

  Select disk utility, then click on the continue button.

  When loading disk utility, select the drive (generally, the entry Out-bumpy) in the list aside.

  Click the Partition tab in the main window of disk utility. A panel will fall.

  Set the GUID partition scheme.

  Define the type of Format Mac OS extended (journaled).

  Click on the apply button, then click the fact when it is active.

  Quit disk utility and re-enter the Utility Menu.

  Select reinstall OS X and click on the continue button.

  This should install it the version of Mac OS X that has been previously installed when the computer was new.

• HP Pavilion DV4-1125nr cannot start after the update/update BIOS version F.12 to d.55

  System: HP Pavilion DV4-1125nr PC Notebook

  Product #: FR922UAR #AB

  The system board ID: 30F7

  Version of the BIOS (before the update): F.12

  OS: Windows 7
  

  I tried to update the BIOS to d.55 which was provided by HP. After the successful installation the closure of new windows BIOS correctly. I restart the PC, HP Logo appears and then nothing happens. The operating system do not load or start at all.

  I also tried to boot using the Windows 98 Second edition CD (to charge BACK), but it did not work.

  Please help me...

  Fortunately I found a Solution to this problem.

  Here are the summaries (and modified according to my needs) the steps that I've taken of the following thread:

  http://h30434.www3.HP.com/T5/notebook-hardware/dv4-1140GO-won-t-boot-after-flashing-latest-BIOS/m-p/19698#M2730

  1. go to the hp site and download the correct version of your BIOS. In my case it had to F.12. Why not the latest version? Because there is no guarantee that the last one will work for you, know after measures.

  2. go where you downloaded the file and using 7 - Zip (or tool of your choice of course) unzip the contents to a folder of your choice. We'll get to that later, so keep this file open.

  3. use 128 MB or no matter what key-USB USB key (the smallest, you might find, because they said the smaller the better ) and reformatted to FAT or FAT32 click with the right button on the drive by clicking on "format".

  4. now that my USB is ready, go back to the folder where you extracted the file to update the BIOS (always open to the right of the folder?)

  "5. If you have the graphics card Intel integrated like me, copy the ' 30F7F12U. FD"of the key USB and RENAME the file '30F7F12U. FD' at '30F7. BIN ". Remember that this name calling to order "DV4-1125nr. If you have a different motherboard, the system or the BIOS, the name must be determined according to the.

  The next steps are exact 0.0 as follows (the link of a full detailed discussion is provided below), I simply numbered:

  6 unplug the adapter from the laptop.

  7 remove the battery from the laptop.

  8 insert the USB key into one of the USB ports on the laptop.
  Does not seem to matter which.

  9. press the 'Windows' key and the 'B' key

  10. connected to the power adapter.

  11 press the 'Power' button on the laptop.

  12. when the LED is entered, letting go of the power button / stop and the two keys down earlier.

  13. After about 10 seconds the notebook started to read the USB key. While searching for the file, the laptop beeps every seconds.
  The number of beeps varied, depending on what size of the key USB has been and
  the number of files on the USB key, a single beep for many.
  If the file was not found, the laptop will restart and try again.

  14. If the file is found then it took about 12 seconds for the laptop to load. No beeps sound not heard during the loading time.

  15. when it is responsible for the laptop has started flashing, indicated by beeps every 2 seconds. It took about 32 seconds.

  16. about 5 seconds after the ringtone had stopped off the laptop computer.

  First I update my pc with the last BIOS (F.66), but did not work for me (operating system not loaded after HP Logo ). So I decided to go back to the old F.12 (the version that has been shipped when the laptop was purchased) according to the procedure described above. But the problem is where to find version F.12 as HP currently provides links only for the version of the BIOS F.66 to d.55 (in the drivers from the hp support site section)

  Fortunately, I found a direct link to this version F.12 in the next thread.

  http://Forum.NotebookReview.com/HP-Compaq/304332-C700-CQ40-CQ45-dv4-dv5-DV6-hdx18t-Insyde-BIOS-recovery-using-USB-thumbdrive-2.html

  F.12 version:

  FTP://ftp.HP.com/pub/SoftPaq/sp40501-41000/sp40749.exe

  This was F.12 and worked for me. Thank God Almighty I return my PC.

  Thanks to all who contributed in the discussions above.

  Kind regards

  -gmuhammad.

  If you think that this post has helped you, then please give KUDOS *.

  Close the thread (Accept as Solution), if your problem is solved *.

• vCenter does not start after the upgrade from 5.1 5.1 U1b (UNIQUE authentication failed)

  Hello

  We have upgrade to vCenter Server (build 880146) 5.1.0a to vCenter Server 5.1. U1b and now vcenter service does not start

  This is the log:

  2013 10-21 T 10: 58:40.221 + 02:00 [02800 info '[OSP]'] [UserDirectorySso] GetUserInfo (Administrators, true)

  2013 10-21 T 10: 58:40.221 + 02:00 [02800 info "[OSP] [SsoAdminFacadeImpl]"] [GetDomains]

  2013 10-21 T 10: 58:40.252 + 02:00 [02800 info "[OSP] [SsoAdminFacadeImpl]"] [LazyInitAdmin] initialization

  2013 10-21 T 10: 58:40.252 + 02:00 [02800 info "[OSP] [SsoAdminFacadeImpl]"] [InitSsoAdminServices]

  2013 10-21 T 10: 58:40.252 + 02:00 [02800 info "[OSP] [SsoAdminFacadeImpl]"] [CreateAdminSsoServiceContent] try to connect to the administration of the SSO server.

  2013 10-21 T 10: 58:40.330 + 02:00 [02800 info "[OSP] [SsoAdminFacadeImpl]"] [InitSsoAdminServices] successfully.

  2013 10-21 T 10: 58:40.330 + 02:00 [02800 info "[OSP] [SsoAdminFacadeImpl]"] [LoginToAdmin]

  2013 10-21 T 10: 58:40.330 + 02:00 [02800 info "[OSP] [SsoAdminFacadeImpl]"] [CheckTokenValidity]

  2013 10-21 T 10: 58:40.330 + 02:00 [02800 info "[OSP] [SsoAdminFacadeImpl]"] [CheckTokenValidity] refreshing SSO token...

  2013 10-21 T 10: 58:40.330 + 02:00 [02800 info "[OSP] [SsoAdminFacadeImpl]"] [RefreshSsoToken]

  2013 10-21 T 10: 58:40.408 + 02:00 [02800 error "[OSP] [SsoAdminFacadeImpl]"] AcquireToken [RefreshSsoToken] exception: failed authentication: authentication failed

  2013 10-21 T 10: 58:40.408 + 02:00 [02800 info '[OSP]'] [UserDirectorySso] GetUserInfo NormalizationException: RemoteGetDomainNames RuntimeServiceFault exception: sso.fault.RuntimeServiceFault

  2013 10-21 T 10: 58:40.408 + 02:00 [02800 error '[OSP]'] [UserDirectorySso] NormalizeUserName AuthException: allow exceptions

  2013 10-21 T 10: 58:40.408 + 02:00 [02800 error '[OSP]'] [UserDirectorySso] GetDefaultPrincipal AuthException: allow exceptions

  2013 10-21 T 10: 58:40.408 + 02:00 [02800 info '[OSP]'] GetDefaultPrincipal(, true) [UserDirectorySso]

  2013 10-21 T 10: 58:40.408 + 02:00 [02800 info '[OSP]'] GetUserInfo(, true) [UserDirectorySso]

  2013 10-21 T 10: 58:40.408 + 02:00 [02800 info "[OSP] [SsoAdminFacadeImpl]"] [GetDomains]

  2013 10-21 T 10: 58:40.408 + 02:00 [02800 info "[OSP] [SsoAdminFacadeImpl]"] [LazyInitAdmin] initialization

  2013 10-21 T 10: 58:40.408 + 02:00 [02800 info "[OSP] [SsoAdminFacadeImpl]"] [InitSsoAdminServices]

  2013 10-21 T 10: 58:40.408 + 02:00 [02800 info "[OSP] [SsoAdminFacadeImpl]"] [CreateAdminSsoServiceContent] try to connect to the administration of the SSO server.

  2013 10-21 T 10: 58:40.439 + 02:00 [02800 info "[OSP] [SsoAdminFacadeImpl]"] [InitSsoAdminServices] successfully.

  2013 10-21 T 10: 58:40.439 + 02:00 [02800 info "[OSP] [SsoAdminFacadeImpl]"] [LoginToAdmin]

  2013 10-21 T 10: 58:40.439 + 02:00 [02800 info "[OSP] [SsoAdminFacadeImpl]"] [CheckTokenValidity]

  2013 10-21 T 10: 58:40.439 + 02:00 [02800 info "[OSP] [SsoAdminFacadeImpl]"] [CheckTokenValidity] refreshing SSO token...

  2013 10-21 T 10: 58:40.439 + 02:00 [02800 info "[OSP] [SsoAdminFacadeImpl]"] [RefreshSsoToken]

  2013 10-21 T 10: 58:40.502 + 02:00 [02800 error "[OSP] [SsoAdminFacadeImpl]"] AcquireToken [RefreshSsoToken] exception: failed authentication: authentication failed

  2013 10-21 T 10: 58:40.502 + 02:00 [02800 info '[OSP]'] [UserDirectorySso] GetUserInfo NormalizationException: RemoteGetDomainNames RuntimeServiceFault exception: sso.fault.RuntimeServiceFault

  2013 10-21 T 10: 58:40.502 + 02:00 [02800 error '[OSP]'] [UserDirectorySso] NormalizeUserName AuthException: allow exceptions

  2013 10-21 T 10: 58:40.502 + 02:00 [02800 info '[OSP]'] GetUserInfo(, true) [UserDirectorySso]

  2013 10-21 T 10: 58:40.502 + 02:00 [02800 info "[OSP] [SsoAdminFacadeImpl]"] [GetDomains]

  2013 10-21 T 10: 58:40.502 + 02:00 [02800 info "[OSP] [SsoAdminFacadeImpl]"] [LazyInitAdmin] initialization

  2013 10-21 T 10: 58:40.502 + 02:00 [02800 info "[OSP] [SsoAdminFacadeImpl]"] [InitSsoAdminServices]

  2013 10-21 T 10: 58:40.502 + 02:00 [02800 info "[OSP] [SsoAdminFacadeImpl]"] [CreateAdminSsoServiceContent] try to connect to the administration of the SSO server.

  2013 10-21 T 10: 58:40.533 + 02:00 [02800 info "[OSP] [SsoAdminFacadeImpl]"] [InitSsoAdminServices] successfully.

  2013 10-21 T 10: 58:40.533 + 02:00 [02800 info "[OSP] [SsoAdminFacadeImpl]"] [LoginToAdmin]

  2013 10-21 T 10: 58:40.533 + 02:00 [02800 info "[OSP] [SsoAdminFacadeImpl]"] [CheckTokenValidity]

  2013 10-21 T 10: 58:40.533 + 02:00 [02800 info "[OSP] [SsoAdminFacadeImpl]"] [CheckTokenValidity] refreshing SSO token...

  2013 10-21 T 10: 58:40.533 + 02:00 [02800 info "[OSP] [SsoAdminFacadeImpl]"] [RefreshSsoToken]

  2013 10-21 T 10: 58:40.595 + 02:00 [02800 error "[OSP] [SsoAdminFacadeImpl]"] AcquireToken [RefreshSsoToken] exception: failed authentication: authentication failed

  2013 10-21 T 10: 58:40.595 + 02:00 [02800 info '[OSP]'] [UserDirectorySso] GetUserInfo NormalizationException: RemoteGetDomainNames RuntimeServiceFault exception: sso.fault.RuntimeServiceFault

  2013 10-21 T 10: 58:40.595 + 02:00 [error 02800 "Default"] cannot add the default permission: user not found

  2013 10-21 T 10: 58:40.595 + 02:00 [error 02800 "Default"] cannot start allow - system has no access rule

  2013 10-21 T 10: 58:40.595 + 02:00 [error 02800 'Default'] [Auth] initialization failed: < class Vmacore::Authorize:AuthException(Authorize_Exception) >

  2013 10-21 T 10: 58:40.595 + 02:00 [02800 error 'authvpxdAuthorize'] could not initialize security

  2013 10-21 T 10: 58:40.595 + 02:00 [02800 WARNING "VpxProfiler"] ServerApp::Start [TotalTime] took ms 27456

  2013 10-21 T 10: 58:40.595 + 02:00 [02800 info 'Default'] judgment of VMware VirtualCenter.

  Hello

  VMware support solve my problem:

  We have seen two issues after the update.

  First of all, there is no user of the solution for the virtual center when I checked the application users with SSO to the webclient service administration page.

  Solve us this problem of repointing Virtual Centre to the next according to the kb SSO instance;

  http://KB.VMware.com/kb/2033620

  1. repoint.cmd configure vc - search server https://vcenter.com:7444/lookupservice/sdk - password "laquesea" - openssl-path of the user "admin@System-Domain"-"C:\Program Files\VMware\Infrastructure\Inventory Service\bin."

  After that, the modules in the vpxd.cfg solution was not properly updated and an operation manual.

  C:\ProgramData\VMware\VMware VirtualCenter\SSL\sso.crt

  vCenterServer_251703

  C:\ProgramData\VMware\VMware VirtualCenter\SSL\sso.key

  Above is the corrected version having replaced "null" with the correct path to the files of certificate and key.

  This allowed vcenter service start successfully.

• Windows 2003 fails to start after the conversion from a virtual hard disk with vSphere Standalone Converter 4.0.1

  Hello

  I've recently updated my host to vSphere 4. I've also upgraded to vSphere Converter 4.0.1. However, when I convert a Microsoft Windows 2003 virtual hard drive in vSphere, the resulting virtual machine does not start. He gets just after the BIOS screen, then turns black with only a white line in the upper left corner of the console.

  I tried the hot and cold conversions. I tried changing the different settings of default conversion. I tried to remove the source machine and recreate.

  It worked well under ESX3.5, so I wonder what I'm doing wrong on vSphere.

  Any help appreciated.

  Thank you.

  In v4 disk are in SCSI format only.

  Probably also the source was in the SCSI format... so v7 to the IDE format give you not configured in the bootloader of the disks.

  André

• Cannot start after the running virus scan

  I have anti-virus protection McAfee suite through our cable company.  I got a message from windows, my computer has virus.  I did a scan of McAfee and he said everything was fine.  After rebooting my computer, the monitor is just a white screen.  What can I do?

  Hi kahw,

  ·         Did you try to start in safe mode?

  ·         You receive a message during startup?

  You can check if the following is useful.

  Method 1: Use the last good known Configuration in the Advanced Start menu and check if it helps.

  Method 2: Try to start in safe mode and check the number.

  Just reply with the results.

• Cannot start after the administrator or power on password screen

  When I try to start to get to where I can fix the computer I start on a back screen which asks for administrator password or power. Don't remember what I put it in the bios. 3 strikes you're out, and you see the message screen 56631584 "prevent the system." hP laptop DV 4 2140US pavillion entertainment notebook running win 7 premium home edition. How can I make this page? Will try to find the used bios and try the a passwords bios generic. Any other suggestions. Feel pretty stupid as I did for myself one night later, change the password. I always
  Tell people to stay out of the bios and does not. Take my own advice. Have a backup in the secondary drive and restore files on the partition on the computer. Any help make me it past this screen would be most appreciated!

  Try > 49799500

• Dell Dimension 8200 windows xp cannot start after the replacement of old CD drive by mounting drive DVD LG GDR-H30N

  Hello guys please help!

  I tried to mount the new drive & replacing the old CD player... the new player can work, but windows xp does not start... It's just a black screen...

  Please advice, thank you!

  Message edited by Don86 on 07/21/2008 04:41
  
  

• U400 cannot start after the initial start of lenovo screen

  Hello
  I got my 400 U since May and it was great before that. I close the lid of my computers to sleep, but I accidentally moved.my wireless mouse. I opened it to put it to sleep again when I was greeted with a screen that I recognize not so I restarted the computer. Now, he can't move before the initial startup screen Lenovo. It says to press fn + f2 to set up or fn + f12 for.multiboot. No command works. The recover button, which brings me to the screen as well. What should I do? PS I have Windows 8 if it's important.

  Worse, he seems to have resolved itself.

• ITunes does not start after the installation of Windows 10

  ITunes does not start after the installation of Windows 10, 1511 version (OS Build 10586.164). ITunes version 12.3.2.35, 6 GB RAM, Intel i3 @3.3 GHz. Itunes and Ipodserver module will run by Manager jobs, but Itunes does not open. iTunes starts in SafeMode as explained in the link below (hold SHIFT and control on your keyboard while you open iTunes).

  Fix unexpectedly closes or problems of launch in iTunes for Windows - Apple Support

  Solution, according to this link, is:

  If the problem does not occur in Mode safe, remove any third party plug-ins iTunes: solving problems with third party plug-ins - Support Apple iTunes but the link has been archived, and I can't find any plug-ins installed iTunes. Any other ideas?

  For general advice, see troubleshooting problems with iTunes for Windows updates.

  The steps described in the second case are a guide to remove everything related to iTunes and then rebuild what is often a good starting point, unless the symptoms indicate a more specific approach.

  Review the other boxes and other support documents list to the bottom of the page, in case one of them applies.

  More information area has direct links with the current and recent buildings if you have problems to download, must revert to an older version or want to try the version of iTunes for Windows (64-bit-for old video cards) as a workaround for problems with installation or operation, or compatibility with QuickTime software or a third party.

  Backups of your library and device should be affected by these measures but there are links to backup and recovery advice there.

  TT2

• Z600: computer does not start after the installation of the 5 TB SATA drive

  My z600 refurbished does not start after the installation of a SATA of Toshiba 5 to disk.  After removing the drive, the computer starts.  I have my computer too old to handle a 5 TB drive, I something wrong or is the DOA drive?

  Thanks for the info.  I added the GPT to my search and discovered what had to be done in disk management.  Here is a page with step by step instructions and photos.  http://www.howtogeek.com/193669/whats-the-difference-between-GPT-and-MBR-when-partitioning-a-drive/

• XP does not start after the installation of avira. Blue screen: STOP: 0 x 00000024 (0 x 00190203, 0 x 87174270, 0xc0000102, 0x00000000)

  Original title: xp does not start after the installation of avira

  I have a HP Slimline s7410
  XP Home Edition SP3
  I had Norton free with Comcast, but since I have no more Comcast became Norton expired. So I uninstalled Norton and installed the free version of Avira, he scanned the computer and it was clean. I went to reboot and now it does not start.
  I have a cd/dvd drive of work.
  I don't have an XP bootable installation CD

  My system worked well until: I installed the free version of Avira

  Whenever I select one on the XP advanced options options menu start, it goes into a boot loop.
  I turn off the auto reboot system failure although it seems only work once, as the next time he's trying to start up it goes into the boot loop.

  Here's what my BSOD looks like:

  Disable or uninstall any anti-virus, disk defragmentation or backup utilities. Check the configuration of your hard drive and check the updated drivers. Run CHKDSK /F to check for hard drive corruption, and then restart your computer.

  Technical information:
  STOP: 0 X 00000024 (0 X 00190203, 0 X 87174270, 0XC0000102, 0X00000000)

  Any help is greatly appreciated! :)

  My first suggestion is to do a system restore at this time point.

  second suggestion is to keep your external drive connected to the pc at all times.  only detach when necessary.   of course, it would be better to install a second hard drive in the computer instead.   in any case, keep your personal files out of the system disk is a wise thing to do.   You can also download and store files for free on the Microsoft Skydrive site.

  third suggestion is to keep your system set upward through executing a check disk and Defrag at least once a month.   Basically, you can open the Explorer and right-click on the drive letter.  then select Properties, and on the Tools tab, you will have the opportunity to run the disk check.  then reboot and do a Defrag.   where this disk check fails, then you will need to run it to the drive via a bootable cd prompt.

  Interestingly, I don't know if the bootable cd that you made you allows to run the disk check.

  so my suggestion is to do a series of tests using your cd bootable your computer works.  see if you can actually run a chkdsk/r at the moment with them.    If Yes, then if your constant worries are having bad sectors on the hard disk, chkdsk/r will identify and mark so windows will jump on them.    in any case, see if your boot at the moment media can run a check disk at all, and let me know.

  fifth proposal is to install "microsoft security essentials" like your anti virus program.  even if you have run ubantu, it is not likely to have been an infected copy.   anti - are most critical virus for windows and not not so much for ubantu or linux is because windows is a system of world class operations.    the people who make the virus deliberately their engineer for the windows operating system.   If, however, ubantu and linux have been just as popular as Windows, virus engineers would make infections for the o.s. too.     Although they no doubt, attacks are more frequent for the windows os.

• I have a compaq presario cq60 with vista which was able to start after the installation of windows updates. HP recovery failed with error code 100a and bios self-test gave error fail #1-07. What can I do?

  I have a compaq presario cq60 with vista. Could not start after the installation of windows updates. HP recovery failed with error code 100a and bios self-test gave error fail #1-07. I took the hard drive and installed in my office. Windows Explorer displays the main and recovery partitions.

  The primary partition has the following folders (including hidden & system)

  The recovery partition has the following (including the language files more)

  Someone at - it ideas why my laptop does not work?

  Thank you

  Greg

  Hello

  You press F11 on startup with a HP Compaq to start the recovery process.

  For problems with the recovery process, you will need to contact HP.

  BIOS problems:

  There are messages for the HP Forums for posters with similar errors:

  http://h30499.www3.HP.com/T5/notebook-HP-ProBook-EliteBook/notebook-HDD-problems-TEst-status-1-07-fail/TD-p/658902

  http://h30499.www3.HP.com/T5/notebook-PCs-pavilions-Presario/HP-Pavilion-dv8000-getting-1-07-fail-error/TD-p/883284

  http://h30499.www3.HP.com/T5/notebook-PCs-pavilions-Presario/HP-Pavilion-notebook-dv6000-1-07-fail/TD-p/1069457

  All the answers it point to a drive about to fail

  See you soon.

• computer does not start after the installation of vista updates.

  computer does not start after the installation of vista updates. Startup Repair is also not working. event name: Startup Repair v2, prob GIS. 1: automatic failover, prob GIS 2: 6.0.6000.16386.6.0.6001.1800, prob 3:6, prob prob 5 and 6 GIS GIS sig, 4:720907: corrupt file, prob GIS 7: 3221226021, 8:3, prob GIS GIS prob 9: repair wrp, prob GIS 10; 2, 0 s version: 6.0.6000.2.0.0.256.1. In addition, none of these advanced recovery options seem to work.

  Hello

  Try the steps suggested by David Y post dated November 2, 2010 in the link given below and check if that helps.

  http://social.answers.Microsoft.com/forums/en-us/w7repair/thread/a6071159-db22-4076-b5d8-31f446dbdf32

  Hope that information was useful