A60-302: problems with Win XP SP2 update

Similar Questions

• Problems with a lot of updates to install. Message: I have no admin auth.

  Original title: Windows Win 7 update

  I have problems with a lot of updates install.  Reason code indicates that I don't have Admin Auth.  Trying to install every time I have re-boot

  I have finally figured out how to see if I were administrator or not... and I AM administrator.

• Hi, I just upgraded my 4s to 9.3.2 and now it is completely dead and will not start. Had no problem with any other previous updates.

  Hi, I just upgraded my 4s to 9.3.2 and now it is completely dead and will not start. Had no problem with any other previous updates.

  Sorted now

• problem with win 7 and 8 of 32-bit

  Mr President, I have a PC with win 8 running. It has 4 GB of ram and processor Intel dg41cn. I installed win 8 after watching win 7 ultimate crash suddenly and lose the whole unsaved data. I thought it was a problem with win 7. but the same problem occurs with win 8 pro 32-bit. now a new problem 8 victory also blocks the same way and when we start it shows 'no operating system found... "but when we shake the cables attached to cpu it starts... now what conclusion do this? What can I do to fix this

  Hardware problems, shorts and/or bad connectors...

  Solution is to repair/replace the material once the short exact question / connector is located.

• Anyone having problems with guides since the update?

  Anyone having problems with guides since the update?

  My guides are everywhere, since I updated my Illustrator last week. The guides are solid lines while they should be dotted (as defined in my preferences) when I'm zoomed out... and then disappear or become dotted but moved when I Zoom.

  It's so frustrating! I can't work like this!

  All the solutions out there?

  Thank you

  lyncylox,

  You can try to disable the GPU performance by clicking on the icon of the rocket in the bar of the App, or on the top of the menu bar, deselect the box Performance GPU; You may also uncheck performance GPU in your preferences.

  I think that the issue should be fixed with the 19.0.1 patch.

  Link to 19.0.1 release notes: https://helpx.adobe.com/illustrator/kb/illustrator-cc-2015-crash-bug-fixes-19-0-1.html

• What is the problem with Creative Cloud connection update

  What is the problem with Creative Cloud connection update?  I tried 25 times to update, but it does not work? Can you please help?

  Double-click on the creative process of cloud.  which opens another window that contains a button exit.

  or, click the process (to select) > click on view > click process to quit.  This method brings up a window that contains the two resignation and force them to leave (in the case of quit smoking does not work).

• Satellite A60 - 743 problem with Bios version 1.90 - WIN update.

  Hello.

  One of my friends give me this toshiba laptop to fix a few problems.
  I decided to update the bios that was 1.6 to 1.9.
  I ran the .exe program and everything was good except when the laptop attempted to restart: I heard 3 long beep and 3 LEDs (from remnants of Caplock, F10 and F11 lit) and the laptop turns off. I tried many things but without results.

  So, what can I do now?

  Thank you to answer me, I'm in a bad situation in front of my friend who rely on me: S.

  And what happens now when you press the button walk / stop and try to turn on?

• Problems with Vista OS SP2 after automatic updates: using OneCare; application of integrated keylogger HP CPU "HP SDP" made by IBM in Durham, North Carolina (?); corrupted Samsung print driver downloaded from the website of the company

  Entered possible hacker:

  1. techie OneCare WINS access - probably not unauthorized and do not believe it causes always provided a quality service, but they have had access in the past.

  2 HP technicians - have had access to my computer once - did a good job with computer crash (not sure cause), but tried to sell me more HP products when I have no money...

  3. after the technicians HP did good job with crash, started to have pop-ups keep HP application that appeared as an add-on that works without permissions on my computer. Google the name of the HP SDP application > recovered information said program is IBM in North Carolina. Called them. Nobody gives any information on the program until I got ahold of a person who gave me the phone to techie Dept. It took all day. Not have not yet contacted technology because they have closed before I could call.

  4. called HP to inquire about the search info from HP SDP. on his goal? HP said he works as a keylogger you sell stuff. But what was weird is after the system crashed and repaired, there was one day that he has opened three times in ten minutes! The behavior of the application has changed after my OS has been repaired. Then after that I indicated HP where I found information on this program, the program disappear from the list of "run without permissions" in internet options explore > manage add-ons > run without the permissions list

  5. one day, I'm working on a word document, and the printer stops abruptly, impression. No amount of turn, or by clicking 'Cancel' will get doc from the printer queue. MS literature said this could be a security issue. The printer says "printing of documents", but no printing at my end.

  This problem is compounded when I delete browsing history and try to refresh the internet Explorer. That activity seems to take pieces of the program Samsung printer with it, even if I had excellent results in the past with Samsung printers and their downloads, and I never had the damaged printer driver to exercise this activity in the past.

  If I didn't have a short term in the Court of appeal in a week, I would say it's a question of OS, or program problem, but it's as if something falls down as soon as another issue is fixed and the unusual behavior of the computer, more timing and the purpose of the brief to me 90% sure that this is a pirate or a virus the surplus of the Samsung driver deleted pieces being left on my machine after uninstall.

  Dear Karena R,.

  Thanks a lot for your excellent advice. The Techies MS OneCare fixed the popup of HP before I read your message. (I was remiss to check my email...). I'll follow the instructions you sent me and am running the OneCare security right now, online scanner that I already know an excellent and effective tool because it has repaired my MS operating system and programs after that I accidentally deleted parts of the operating system by removing a .dll file, I need or such a thing! I also wanted to thank you for the information about the object of the HP SDP pop-up window. I saved your instructions on how to remove this case, the pop up appears again. One thing I noticed is that, after removal, some keys on my keyboard don't work, and I've read that other HP users encounter the same problem with the keys on the keyboard. The keys that seem to be affected are the keys that automatically open and close the door of the CD burner. Not a problem, because it is another way to open and close the drawer. It's one that HP must improve. In regards to your advice on the printer driver you have been 'right on' new! I reinstalled the driver using my own CD (not the latest driver, but one that works!) I think that the problem with the update of the Samsung driver that I downloaded from the Web site doesn't have some kind of problem. It is very unusual for a driver to Samsung, because I got excellent results with printers Samsung and free updates downloaded from their Web site. The first Samsung printer I had worked so well, for so long as the small rubber roller that takes the paper and it feeds through the printer wore out until the printer is, literally in a 100,000 pages printed after that I bought for about $80.00 dollars! So, I went out and bought another one, and that's what I use now. The printer works fine now, except for some reason, the icon in my taskbar notification area, allow to check the printer the status of jobs, cancel or repeat printing as before. Once. from time to time, a job stuck in the queue for the printer and will not erase unless I unplug the printer from the central unit. Nor will it print. But since I reinstalled the driver, this has happened only once. With the downloaded update, it happened all the time. It is possible that my OS is misconfigured, but I started to run the routine tune ups and analyses using OneCare and unless I used to defragment. I learned that the defragmentation of the hard disk too can cause problems also. The last thing is, I think that sometimes, tiny files needed to run my OS and files other programs can be sent to my temporary folder by accident. MS still once, All_Knowing computer, somehow recognizes the files I need and pushes me to ignore them, but perhaps it does not work for non-Microsoft like Adobe programs. I will use the link in your message to run the fix with the printer driver just to see if it works. If it is not the case, I can always reinstall the driver with my CD that came with the printer. Thanks for the excellent and informative tips and forgive me if I do not respond sooner!

  Sincerely,

  E-mail address is removed from the privacy *.

• Problems with Win 7 updates

  Hello everyone,

  For weeks I can't update my Win 7 Home Basic on an ACER PC of detail.

  I get the usual Windows Update screen, it shows the download of updates, but then it shows (0 total KB, 0% complete), while 0% does not change.

  I chose the only feature in the file of 1 MB to see if changes as the download progresses but 0% 0% does not change in 10% or more not even after 40 minutes.

  It seems that something stops the download.

  Please tell us how to make the change from 0% being downloaded.  Thank you.

  Merry Christmas!

  Hi John,.

  Thank you for visiting Microsoft Community and we provide a detailed description of the issue.

  According to the description, I understand that you have a problem with the Windows updates not working only not on the system.

  Certainly, I understand your concern and will try my best to help you.

  There could be a possibility that this issue would have intervened if the updates were not installed correctly on the system.

  I can really imagine the disadvantages suffered by you during the installation of Windows updates. Sometimes it is really frustrating when things do not work correctly with the machine that we are planning and wait. So, we need find the root cause of the problem and I would definitely you help solve the problems in the right direction in order to get this fixed number.

  The question arises if the Windows Update package is not configured properly, or because of incomplete installation. I would say so, you remove any external media connected to the computer and try to crash restart your computer 2 or 3 times and check if you get through this error message.

  In addition to this, I suggest you try the following methods if you are able to boot to the desktop and check if the problem persists.

  Method 1:

  I suggest you run the Windows Update Troubleshooter to check if it works. Please follow the link given below.

  Open the Windows Update troubleshooting tool

  http://Windows.Microsoft.com/en-in/Windows7/open-the-Windows-Update-Troubleshooter

  Note: The troubleshooter above checks if the network card and Windows Update services work properly.

  If the problem persists, follow method 2

  Method 2:

  I suggest you to reset manually the update of Windows components. Please follow the steps outlined in the article below and check if it works.

  How to reset the Windows Update components?

  http://support.Microsoft.com/kb/971058

  Note: This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

  How to back up and restore the registry in Windows

  Now, you can try to run the Windows updates and check if the steps above to solve the problem.

  I hope this information is useful.

  Please let us know if you need more help, we will be happy to help you.

  Thank you.

   

• Problems with Win 7: lost internet connection and downloads

  Hello

  I'm not sure that the two problems are related... I don't know what topic to choose.

  I have a custom, with Win 7 machine, and I install all required updates. But for a while (months? I turn it off every night) it says 15 updates are available every time that I reboot, and I see no updates installed (I search for installed updates today).

  Anyway, let them go all the way, and when I restart, I have no connection. It's happened several times (everytime I reboot). Maybe that I had the chance to solve the problem by restarting (and reinstalling :)) 15 updates, but today I can't. I am connected by wire to a modem. Our all other computers work.

  I have a job in the process and need my internet connection (easier to work on a desktop computer with large screen of a laptop) and I can't.

  In network and sharing Center, there is a cross between 'Several networks' and the internet. I have the message if I 'connect or disconnect' "no Internet access.

  I did ipconfig, and I get media disconnected. I did not unplug anything!

  I would be very grateful for your help.

  Thank you very much

  Hi Allwyna,

  Thanks for the reply.

  As you said, there are 16 updates that never completed the installation. There could be opportunities updates are at the origin of the problem. So before solve us the connection problem. We should go ahead and first to solve the problem of updates.

  I would like to know you have installed any Security Antivirus software on your computer, if so I first suggest you temporarily disable the Antivirus software install on your computer and check if that helps.

  Warning: Antivirus software helps protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you have to temporarily disable it to install other software and/or any relevant issue, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks by malicious software.

  Try the methods.

  Method 1:

  I suggest following the steps listed in the article and check if it works.

  Problems with installing updates

  http://Windows.Microsoft.com/en-us/Windows/troubleshoot-problems-installing-updates#1TC=Windows-7

  Method 2:

  I suggest you to manually reset windows update components.

  http://support.Microsoft.com/en-us/KB/971058

  NOTE: This section, method, or task contains steps that tells you how to change the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

  322756 (http://support.microsoft.com/kb/322756/ )

  How to back up and restore the registry in Windows

  I hope this helps. Please let us know the results. We will be happy to help you further.

   

• Problems with Lightroom 3.6 update

  After update to install 3.6 LR, LR will recognize is no longer Photoshop CS5 64-bit as an external editor. After adding it again manually, it still doesn't let me use various features of Photoshop plugin. No "merge to a panorama' or 'merge to HDR' or 'open as smart object' or 'open as layer '. I was able to add manually the Photoshop C5 return as long as editor-in-Chief, but the options are still grayed out and pictures will not be re - import in Lightroon after editing. I am running Windows 7 64 bit. Absolutely no problem before installing 3.6 LR.  Any suggestions? I do not want to reinstall Photoshop CS5 and I can't uninstall LR 3.6 will fix the problem...

  Anyonwe else has this problem?

  I had the same problem with my desktop i7 Win 7 CS5 manually added but things just weren't right then reinstalled Photoshop CS5 and now everything is fine. Problem list that I had with an update of Lightroom came to 2.4. A side note ran that same update on my Win 7 i5 laptop no matter what so ever.

• Still having problems with Itunes after music updated to iOS 9.3.2

  How can I solve the problems created by the software update Apple iOS 9.3.2 lost all my music will not restore using itunes etc

  What questions are you talking? Music of Apple, it's where you posted what you use? What music has been lost? It's all in your Apple's music. The rest should be in your iTunes library on your computer. I have almost 2K songs in my iTunes library and they have all been there since the very beginning, across all iOS and iTunes updates.

  What happens when you try to restore your phone to iTunes? What it the music has to do with whatever settings you have for music and once again, depends on your participation with music Apple or any other service.

  Try it please take a moment to build a question, describing what occurred, what device you use, what computer OS you use, and what troubleshooting steps you tried to correct. In addition, you use the services of Apple, and have you backed up your phone and your computer.

• I have problems with my games after update my iPad 2 to 9.3.2,and can anyone help?

  IS that what someone has problem with updated their 9.3.2 at ipad2?

  Yes.

• Satellite Pro C850 - problems with WiFi after Windows update 8.1

  Hello

  I was wondering if someone could give some advice on a problem I have.

  Had an adjustable C850 Pro for a few months and worked well on Windows 8.
  I myself am then harassed and intimidated by Microsoft Update in order to install Windows 8.1 and in a moment of weakness, I succumbed (got sick of the nagging).

  Since that time, my wifi is very intermittent; either I'm on another computer write this and the laptop is essentially not connected to the internet.

  For some reason any (although I didn't try it before), I can not connect via ethernet either, so I think it's probably the driver problems. (I also tried to connect the public wifi but fails).

  I tried to install the driver WiFi Toshiba 8.1 but that has not solved the problem.
  Then I noticed that I'm supposed to install a bunch of drivers in the order.

  Maximum setting to do it, but the first package (associated with bluetooth) said I have to remove the current driver... I try by "turning off", then "Uninstall" but 8.1 seems to re - install automatically and I don't know how to disable this option (I can try to delete the driver file, I guess, but I'm sure 8.1 covered too and will probably launch a drone to try me out ", if I do). *

  Any kind soul there suggestions on a way forward? Pls.

  I see in the instructions of Toshiba Windows Update 8.1 should I have uninstalled the drivers before the update, but there is not much I can do about it now. :(

  Hello

  > I don't see in the instructions of Toshiba Windows Update 8.1 should I have uninstalled the drivers before the update, but there is not much I can do about it now
  All your problems with the Windows 8.1 update related to the fact that you have not upgraded the Windows 8.1 system as recommended by Toshiba.

  Details:
  http://www.Toshiba.EU/innovation/generic/windows8_1-message/

  Solution?
  Back to Windows 8 (reset the system back to factory settings)
  Then, install all updates and patches for Windows 8 and follow along with the upgrade of system as described on the Toshiba Windows 8.1 upgrade page

  On the page of the Toshiba UE driver, you will find all the instruments that must be installed in the correct order and Windows 8.1 driver!

• Serious problems with the 6.16 update: reboot page & chat

  First of all, I want to mention before, if there is no problem with Skype, it would make my computer all freeze where I by force to restart my system. If she didn't answer I could not force the program to close and would be forced to stop and start again.

  An hour or two there is something like it happened and so I restart my computer. Restart Skype updated during this time. When he came I went to my main group chat and it froze my computer, forcing me to do a hard cock down. For the next couple hours, it's the same thing. Even when I tried to disable my internet so I couldn't even open Skype. It is only now, 4 hours later that I am able to access Skype and the rest of the features on my computer, something I wasn't able to do.

  With this update, the display for the bubbles of text is not something I like. Timestamps are gone even if I still have the box checked to have these timestamps. I can't scroll to see previous messages and certain user setting have been forgotten or reset. I'm not happy about all of this change suddenly that I'm already rather on the fence with how much I love Skype.

  I'd like a way to return to the old interfaces without suffering a decline in quality with calls and video.

  The cat new UI is provided with the 6.16.64.105 version only. You can uninstall this 'special' version and install the 6.16.0.105 version with the old chat UI window.

  http://download.Skype.com/MSI/SkypeSetup_6.16.0.105.msi