A60 w/Vista64 and loss of network connection 4 GB... (unsolveable)

Similar Questions

• Pavilion dv6-7135nr: loss of network connectivity and wireless after upgrade to Windows 10 cable

  After the upgrade to Windows 10, I lose network connectivity after a restart of the computer.

  The operating system fails to load drivers Broadcom 4313 n. The driver date is May 8 202. The reason code is 31 on failure to load the drivers.

  I returned to Windows 7 and migrated to Windows 10 several times with the same result. I tried to upgrade on the Broadcom drivers, but Windows says they are up-to-date.

  I also see that the Realtek PCIe GBE Family Controller is having the same problem.

  I think it's a driver problem, but cannot find the correct set of drivers.

  Any help would be very useful. I have just re-upgrade to Windows 10 and have network connectivity.

  Hi @karbacdb,

  Thank you for visiting the HP Forums! A place where you can find solutions for your problems with the help of the community!

  I stumbled upon your post on the laptop and wanted to help you! I looked in your question about your HP Pavilion dv6-7135nr Entertainment Notebook and problems with connectivity Wireless Windows 10. You can try to use the Windows Update Troubleshooter to fix updates that do not come through Windows 10.  Please restart the laptop twice to make sure that all updates are completed!

  Here is a document that shows how update the drivers that do not work correctly with Windows 10.

  Here is a tool of Broadcom for Windows 10 drivers that could help.

  Windows 10 drivers are available through Windows Update. Please be aware that HP does not Windows 10 drivers will be available from Windows Update.

  Please let me know how it goes.

  Thank you.

• 2012 R2 VM server traffic causes a loss of network connectivity

  I'm having a problem.  Currently, I pay for a hosted dedicated server.  There are 2012 installed r2 server.  It has a single network adapter.  I created a virtual internal switch and am currently using NAT routing to assign DHCP addresses and share the internet connection of the NIC to the virtual switch.  Any time there is network traffic on the VMS, it causes the Intel adapter disconnect.  If I download something on the virtual machine it almost forces me to go to the control panel for the host and restart the machine.  The error is less and I am happy to provide any other information that may be useful.  It is not a card Broadcom QMV is not the issue.  However, I checked to make sure that the Intel card is not activated QMV and it does not have this option.  Any assistance that could be provided would be appreciated.

  Server issues are better managed to the:

  http://social.technet.Microsoft.com/forums/en-us/home

  So please post your request there.

• Printer all in one, loss of network connection

  I have a Photosmart HP 5510.  This is only about a year, but is now always lose the network connection.  I configured correctly (it actually worked!) to the wireless router.  Most of the time now when I need to print, it tells me that the printer will not communicate with the computer.  I took it out of the network, put it back on, and he said: it is connected.  I have not printed the network status page, everything is OK, no problems found.  So I'm still not able to print? It's very frustrating.

  I set it up to my Macbook Pro and my iPad.  He has worked on both devices, but I can't seem to get it back in shape now.

  I have looked on the forum here and have seen many many people with the same problem, but most seem to be using a Windows operating system.  Any ideas on what to do?  I really need to print!

  I did reset the router that worked. It happens every few weeks for some unknown reason. I'm in. fiber.

• loss of network connection driver problem?

  After years of service without problem pc to my son (wired) suddenly does not connect to my home network (ARRIS TG862). Others - both wired and wifi still work. Windows 7 gives messages: "Intel Management Engine Interface has a driver problem" and "Intel Acteive Management Technology-SOL (COM3) does not work properly...". Error code 43... Windows has stopped this device because it has reported problems... Router software no longer sees his pc, either.  Can I download the updated driver for usb on my machine and install on its fix? How? Also: tried to download a copy of his BONE and got response to contact you...

  Hi Ron.

  I see what is happening with the network connection of your computer. Please click on this link to fix the problem: ECS. Please follow the post of Geethu B.

  Keep us informed of the results.

  Thank you
  Richard tie

• no internet until I disable and then enable network connection

  From time to time when I start the pc I have no access to the internet, I don't have on any other pc will work fine. I have to disable and then enable the network connection, but sometimes this does not work either, so I check and uncheck Protocol internet version 6 then it works. How can I solve this?
  I am running windows 7 ultimate

  Hello

  Check the support site for the manufacturer of the computer and make sure that you use the latest drivers.

  If the support site has a newer version of the drivers and installed current ask drivers the most up-to-date drivers use this method.

  Download the drivers and extract them to a folder of your choice.

  In Device Manager, right-click on the adapter.

  Click Update drivers and choose her browse my computer for drivers.

  Choose let me a list of choices, click on disk and point to the folder with the drivers.

• Implementation of the LACP Protocol in vDS without loss of network connectivity

  Hello

  Situation: a 2 node Cluster esx with a vDS with 4 physical uplinks. VDS has 4 trade (management, 2 for vmotion
  (and a PG for the vm network).

  What are best practices to implement LACP without interruption to network connectivity?

  I read about some problems remove some uplinks to an existing vDS. If someone does this?

  Best

  Alex

  Here is a video I created using LACP with the VDS 5.1.

  Configuration of LACP on a vSphere 5.1 Distributed Switch - YouTube

  Like I said before, any time delete you an uplink it there is a risk of disruption of the network. You then create new distributed port groups that are needed.

  High level:

  1. Create new VDS
  2. Remove 2 uplinks from the former VDS (chance to drop ping)
  3. Add 2 uplinks to the new VDS
  4. Configure LACP on the new physical ports and VDS
  5. Create groups of port required on the new VDS
  6. Migrate virtual machines (chance to drop ping)

• Updated IE7 to IE8 and lost my network connection, get the error "network cable is unplugged" which is not

  After upgrade, network display icon with a red X through it indicating "network cable is unplugged" - which is not.  System Restore gave me back IE7, but without two of the toolbars (I've since found the fix for this - but too late).  Tried a system restore and now completely lost internet connection - IE will not launch.  Always get the message "network cable is unplugged".   I have reset the modem, but nothing works... should I ask Microsoft, HP, or my service provider (Rogers)?

  Thank you

  Christine

  Hello MsC_99

  Check the modem on the back of the system where the cable ether net branch. Think you that shed light on this subject? If this is not the case then you may have a problem with the NIC or ether net cable may have problems. If you do this then try uninstalling and reinstaling the NIC in Device Manager. If you don't see the network adapter in Device Manager then try booing the system BIOS and make sure that he is seen here. Let me know what you find. Thank you.

• NETGEAR 7550 & printer HP Photosmart 5520, loss of network connection

  Connect a new printer HP Photosmart 5520 using Netgear 7550 DSL Modem and router with AT & T Wireless.  Software installed without any error, but after 5 min or so nothing is able to connect to the printer.  Restarted the printer and ping started the ip address of the printer.  Once the printer is connected to the network, I was able to ping it, but after 5 minutes the ping failed.

  Other deviceses wireless have no problem connecting to resources (internet, file shares, etc.).

  I also took the printer at home to see if the problem exists.  Printer had no problem and was able to ping from one day to the next.

  The problem seems to be a combination of the Netgear router and this printer HP (firmware?).

  Any suggestions in addition to the uninstall of the printer/scanner software?

  Well Yes. I would say replace the router - and not to buy an another Belkin.  Stick with brands like Linksys or Netgear.

• Microsoft NLB and after vMotion network connections

  We have several hosts ESXi (4.0) one of them containing a virtual member of a NETWORK 8 Server Load Balancing cluster.

  When I migrate all servers to host containing the Member of NLB cluster virtual that I can no longer connect to one of the other 7 members. But the strange thing is I can reach any other machine on this host as well as not been transferred there recently (I don't know what triggers it)

  The migrated machine can reach any other machine not in the NLB cluster.

  The cluster is located in multicast. and is in the same subnet as the other servers.

  http://KB.VMware.com/selfservice/microsites/search.do?language=en_US&cmd=displayKC&externalID=1006525

• I have problems connecting to Business Catalyst Muse.  When I try to publish, I get a message saying his time trying to connect with my Adobe ID - and check the network connections.  All of my connections are very good... Muse is connected to my Adobe

  I was able to publish my Muse Business Catalyst site two days ago, but yesterday and today there is a delay when you try to connect to Business Catalyst.  What should I do?

  Hello

  Please log out of Muse and sign again. Make sure you also apply creative cloud is updated (to check that disconnect from the creative cloud and login again if its not up to date you will be asked to install the update)

  To sign out of muse click help > Sign Out

  
  

  If the problem is still not fixed then please rename the folder "OOBE" to "OOBE.old" starting from the following locations

  MAC: (This file can be found at Finder > go > go to folder > enter ~/library/application support/Adobe > press return)

  Widows: (This file can be found at C:\Users\\AppData\Local\Adobe )

  
  

  Please let me know in case the problem persists

  
  

  Concerning

  Vivek

• Updates 2478658 KB and KB2518864 could not install and cause a loss of internet connectivity

  Hello

  Updates KB2478658 and KB2518864 cannot be installed in my SBS 2003 and caused a loss of internet connectivity.

  A while ago, I had a similar problem, i.e. do not install and loss of internet connectivity after you apply Windows Server 2003 SP2 on SBS. In this case, we have solved the problem with the support of a Customer Support person Microsoft, a service through which we paid.

  According to the suggestions that I found in the Microsoft Web sites, I managed to remove everything that was installed by the KB2478658 and KB2518864 updates and the reinstalled successfully. I did these manually because I don't have an internet connection.

  After you have reinstalled the above mentioned security updates, I repeated all the steps that led to the problem of the previous time. Among the steps taken, have been indicated in:

  Common problems of networking after you apply Windows Server 2003 SP2 on SBS

  http://blogs.technet.com/b/SBS/archive/2007/04/24/common-networking-issues-after-applying-Windows-Server-2003-SP2-on-SBS.aspx

  2. 948496 an update to turn off default SNP features is available for Windows Server 2003 and Small Business Server 2003-based computers

  http://support.Microsoft.com/default.aspx?scid=KB; EN-US; 948496

  Unfortunately, I was unable to restore connectivity to the internet this time.

  There is connection between the NETWORK card and router. I could ping the NIC IP address, but not that of the router (I get an "unreachable" message).

  I look forward to suggestions and recommendations to solve this problem. I have already paid once resolved a problem that was not directly caused by me and do not wish to do it again.

  Thanks in advance.

  JL

  Hi JL,.
   

  Your question of Windows is more complex than what is generally answered in the Microsoft Answers forums as it is related to a problem with small business server. It should be better in the Windows Server Forums of business.

  Please post your question in the Windows Small Business Server Forums.

• Once a day, I lose all network connectivity on my Windows XP SP3 laptop. When I try to ping something I get this error: "PING failed, error 1450' code"

  Hello, those in about 3 days, I lose network connectivity on my laptop with Windows XP SP3. When I ping no matter what page of the console I get the following error message: show PING failed, error code 1450. I tried to use the option of repair in my area, but it did not help. Computer restart resolves the problem, but I'd like to avoid doing. What should I do to solve the problem?

  original title: loss of network connectivity

  Since this happen in two different ISP, try to reset your modem or router and also contact your ISP support. Some ISPS will set a rule and limitation of their user, but in your case, discuss it with your ISP, or contact technical support for your PC manufacturer.

• try to buy the game for the new Flight Simulator addon and it wants to connect to xbox

  Connect to Windows Live Market place and there a network connection issue, or I'm sent to xbox.com for account number that I have not ownbut my grandson's.

  Hello

  ·         What version of Windows are you using?

  Try the following article and see if it helps.

  http://support.Microsoft.com/kb/977709

  If the problem persists please ask your question in the Xbox forums using the link below.

  http://support.Xbox.com/en-us/Games/PC-games/game-support

• Said connections wireless network connection are available, but the networks to connect to are no longer visible in the connection

  I got a new laptop from work and have connected a couple of times on our network.  Now, he does not connect through the wireless network connection.  He said that the connections are available, but there is no connection available more in the list.  If you have to manage wireless networks, it is in the list... but you can not log in via this page.  Any help would be grateful.

  Thank you!

  Hello

  1. what operating system you are using?

  2. how many computers is connected to the network?

  3 - is a domain network?

  4. What is the exact error code or error message you received?

  5 have have there been recent changes made on the computer before the show?

  Follow the steps mentioned below and check if that helps.

  Method 1: Troubleshooting run Network.

   

  http://Windows.Microsoft.com/en-us/Windows7/using-the-network-troubleshooter-in-Windows-7

   

  Method 2: Wi - Fi and in Windows network connection issues.

  http://Windows.Microsoft.com/en-us/Windows/help/wired-and-wireless-network-connection-problems-in-Windows

  If you cannot connect to a network, it could be a problem with your network adapter. You can try to use the network adapter troubleshooting utility to automatically find and fix some common problems.

  How can I troubleshoot network card?

  http://Windows.Microsoft.com/en-us/Windows7/how-do-I-fix-network-adapter-problems

  Method 3: Disable the security software and check.

   

  You can also temporarily disable the security software and check if the problem persists. Be sure to enable this security software on the computer after checking.

  http://Windows.Microsoft.com/en-us/Windows7/turn-Windows-Firewall-on-or-off

  http://Windows.Microsoft.com/en-us/Windows7/disable-antivirus-software

  If disabling the security software solves the problem, then contact the manufacturer of the specific security software to fix the problem.

  Important note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks.

   

  For more information, please see the following links:

  http://Windows.Microsoft.com/en-us/Windows7/why-can-t-I-connect-to-a-network

  http://Windows.Microsoft.com/en-us/Windows7/set-up-a-wireless-router

  http://Windows.Microsoft.com/en-us/Windows7/add-a-device-or-computer-to-a-network

  http://Windows.Microsoft.com/en-us/Windows7/wireless-networking-frequently-asked-questions

  I hope that helps!