NETGEAR 7550 & printer HP Photosmart 5520, loss of network connection

Similar Questions

• Printer all in one, loss of network connection

  I have a Photosmart HP 5510.  This is only about a year, but is now always lose the network connection.  I configured correctly (it actually worked!) to the wireless router.  Most of the time now when I need to print, it tells me that the printer will not communicate with the computer.  I took it out of the network, put it back on, and he said: it is connected.  I have not printed the network status page, everything is OK, no problems found.  So I'm still not able to print? It's very frustrating.

  I set it up to my Macbook Pro and my iPad.  He has worked on both devices, but I can't seem to get it back in shape now.

  I have looked on the forum here and have seen many many people with the same problem, but most seem to be using a Windows operating system.  Any ideas on what to do?  I really need to print!

  I did reset the router that worked. It happens every few weeks for some unknown reason. I'm in. fiber.

• Printer HP Photosmart 5520: Unable to connect to the computer

  I recently set up my HP Photosmart 5520, including with web connected HP services. My laptop immediately after the passage of the printer, I am able to print correctly. However, after some time, the connection between the printer and the laptop is lost and when I try to print, I get an error message:

  However, if I send a mail with an attachment to the printer the printer still prints the document. This suggests that it is connected to the internet, but anyway not via WiFi for my laptop. Any suggestions would be welcome.

  Hey @mb218,

  Thanks for posting in the Forum from HP Support.

  I understand that you are experiencing connectivity problems when you use your HP Photosmart e-all-in-one 5520, printer in combination with your Windows laptop.  I want to help you with this.

  The first thing I recommend you try running HP and Scan Doctor for Windows printing.  Click here to install.  Ideally, this utility automatically detect and correct problems with the configuration of your software.

  If this basic approach is short, I recommend that you click here to access a HP article that provides more details and more intense network troubleshooting steps.  In particular, you may find that Solutions 2 and 3 are useful for strengthening your wireless connection.

  Please let me know the result of your troubleshooting by responding to this post.  If I helped you to solve the problem, feel free to give me a virtual h.o.t. by clicking on the 'Thumbs Up' icon below.

  Thanks again for your post and have a great day!

• Photosmart 5520: Computer does not connect to Photosmart 5520 more

  Hello

  I have a printer HP Photosmart 5520 which, until recently, worked absolutely fine! I even upgraded my laptop to Windows 8 to 10 and the printer continued to work perfectly.

  However, a few weeks ago the printer no longer. In other words: when I try to send a print job to the printer from my laptop (wireless), the computer says it can't find the printer. The printer is on, certainly on the same network as the laptop's wireless and nothing has changed in this network. But I keep getting errors.

  I tried to solve the problem by deleting the printer in my computer and re-install the drivers, but when trying to run the driver installation program, it cannot locate my printer either. I can't locate even by manually typing the IP address of the printer (as Setup request)... Yet I don't know still certainly both devices are in the same network and I also double, triple checked the typed IP address.

  I really don't know what else to do. I also do not understand the problem at all, because I have absolutely nothing changed in my computer or network... the printer became simply "inaccessible".

  I'm now work around the problem by using e-print (send documents to print my eprint address), but I don't like this option because one) it's unnecessarily complicated. and (b) whenever you post a document, the printer prints an extra page with the e-mail address and it is a waste of paper and ink.

  So if someone could help me with my driver/connection problem, I would be very grateful!

  Thank you

  Lenny

  Running the diagnostics to http://www.hp.com/go/tools can help solve the problem.  Download and run printing HP and doctor Scan.

  You mention that you have checked the IP address.  You can open embedded Web Server (EWS printer) by entering the IP address if the printer in your browser?

• Unable to connect any wireless for printer HP Photosmart 5520 laptop

  I've been troubleshooting for hours, but I can't connect wirelessly to my computer to my new HP Photosmart 5520.

  All are connected with excellent resistance to the home network, but none of the laptops will complete the HP printer installation process.

  One is a Windows 7 Dell and the other is a Macbook Air with Mac OS10.  The Mac will recognize the printer when I go to add the printer in preferences, but it cannot print to the printer.  He repeats to me there are problems connecting with the printer.  No computer cannot find the printer using the HP device connection software.

  I was able to print using the email address of the printer from my iPhone with HP ePrint, but otherwise I can't.

  Help, please!

  Hi Spencer,

  Thanks for the advice, but it is not really relevant, there is no wifi comm errors.  My wireless access point is not part of the router and the network wifi, as well as my home ethernet network is inside the firewall.  The printer receives an IP address very well, I have a reserved for her on my dhcp server address (same as I do for my sky box, tv etc.). It works fine for everything except customers also wifi. So direct print jobs internet, wifi works from iDevices, printing from a working client wired network, but a client who, also on wifi, falls down. It is a single subnet lan with some addresses reserved and others from a pool.  I made a little chart - the DHCP server is actually in the firewall, which is a computer card. In this case, the laptop also has a reseved for lan and wifi addresses. I have disabled the firewall windows on the home network.

• E-all-in-one printer, HP Photosmart 5520 connected to the network but not detected by computers

  Hello!

  My printer HP 5520 indicates that it is connected to my network, but the wireless printing does not work correctly.

  In the implementation of the process of the driver software the printer displayed after resetting my router, a Huawei HG655d. I get a "no connection" error when I try to send a print job to the printer. Function AirPrint doen and the printer is not visible on the iDevices. I have the latest version of my OS (OS X 10.8.3) installed, I also tried to reset and reinstall my router and my printer several times but nothing works.

  Is there a way to make printing wireless correctly?

  Access my printer directly via its IP address works, so the network connection should work. I've added details of the network below:

  Your router may not support Hello, who need your Mac to find the printer.  Enter the configuration of the router and see if there is a way to activate it.  It is sometimes called mDNS.

  Additionally, make sure that the multicast is enabled.

• HP Photosmart 5520: HP Photosmart 5520 not shall be connected to the network or print.

  Our printer working fine until a couple of days. Now, when we print dialogue print open but constantly says "the printer is not connected. I tried to connect to the router using the screen of the printer, but get a message saying "cannot connect". I rebooted everything what it many times.

  At some point during those two days, I have managed to get so our imac had found the printer and actually thought it was printing, but nothing only happened at the end of the printer. Now I'm back to "the printer is not connected. I don't know what caused that change or change it back.

  Someone had mentioned to a static ip address in the printer, so I tried this (assuming I did it correctly) passing through the settings - without wire-advanced settings-ip settings-manual where it says ip address no connection, then put an address ip, but this was not accepted and always says 000.000.000.000.

  The Test report suggested allowing MAC wireless network could be the problem, but somehow, I spent (don't know how) and the latest report ' NECK until low but above indicates a problem IP address by saying that our ' HP printer is currently configured with an IP address of auto. On most of the networks that it will prevent your printer to communicate on the network... run the next solution." The solution suggested to restart then print a new test report and then says "check that the printer has received a DHCP IP from your network router address, check the configuration source in the current configuration of the report section - it should show DHCP. But after I restarted again the ip address shows 0.0.0.0 and the configuration source said no "specified." The test report gives no solution to change the ip address to view DHCP so I'm stuck. My Advanced settings still say IP settings - automatic. Help appreciated. Thank you. P.S I'm not good with all this talk about techy but I am surprised that, in my opinion, I understand what I wrote!

  I removed the ssid password and managed to print. I put the password, it is lacking in WPA WPA2 & (I have not WPA2-AES) and again the printer cannot connect. The printed report again now says FAIL to no filtering and implies that there is something to do with active mac filtering which I don't understand. Thanks for your help so far. We are called to take the kids to the movies can be on so not for awhile.

• HP Photosmart 5520 - problems with the connection to the web service

  Hi, I'm trying to run the web service on Hp Photosmart 5520, but it does not work. Wireless printing works well, but he says that it cannot connect to the server and sometimes requires adding a proxy.

  I've set up a fixed IP and I used it in the IP (manual ip) configuration, I've implemented manula and gateway subnet mask (using the address of my router). I used the same primary DNS preferred (but also tried 8.8.8.8 and others)

  No question.

  Currently, I removed all of the proxy page. The error I get says that it cannot communicate with the server.

  Thanks in advance

  .. don't ask me what happened... while I was writing this worked
  Thanks anyway

• Window printing preferences Photosmart 5520

  The Properties window of the printer for my D5160 late used to look something like this:

  

  By comparing the Properties window of the printer (for example, the inside Word on my Vista PC) for my new 5520 new seems very basic:

  

  This brings me to wonder if I had installed the complete driver.  I installed from the CD.  It seems a lot more hostile user driver D5160 who introduced many shortcuts with icons to quickly access the print speed, better printing, photo, etc. with the drop down menus to further customize the settings and the ability to save settings customized on a screen.  I'm sure all the same options are there in the new driver but not too easily accessible, certainly for others less users lean back on my computer and there seems to be no way to save the custom settings.

  Can anyone say if this is the best I can expect, or I missed something out somewhere during the installation and there is a more user-friendly version?

  There has been some changes in how drivers are designed for the for the 5520 Photosmart D5160.

  Some of these changes have taken place for many different reasons, but one of them is that many of these options are integrated into the software normally used for printing. Many of these custom settings are in programs such as Microsoft Word and photo printing software. Instead of doubling these services and leading to conflicts of drivers, these options were left more to the software providing information for the print driver on is made on the rear part.

  It is the correct printing preferences screen for Photosmart HP 5520. I hope this helps.

• Printing of A4 e-all-in-one printer, HP Photosmart 5520

  Hello

  I try to print in A4 format, but my 5520 does not have this facility.

  Any help would be welcome.

  I don't see what I'm doing wrong, I have changed to plain paper but still do not see an option A4.

  Thank you

  Hello

  Have you installed full driver and software on your computer? What is the operating system on your computer?

  Kind regards.

• Printer HP Photosmart 5520

  Can I connect my printer to my desktop cable and at the same time to use the wifi with my laptop

  Yes you can.

• Can I use my OSX 10.4 with my new printer HP Photosmart 5520

  Help, I'm completely to the top of the Creek with my new wireless printer. Two problems. I can't download the software because my system is. Mac 10.4.11 and cannot be updated (I have no intention to replace at the time of the sand). I was able to print, but are unable to recognize the other to scan. It is important for me, so new purchase is useless if I can't do that.
  The other option could e-mail to my ipad stuff and can print wireless. Hah! If only. My ipad I.O.S. 7.0.4 cannot find any printer, even when it is turned on and connected to the same router etc. Argh. Please someone suggest something to get out me of this ever decreasing circles.
  Thank you

  Thank you, Lisa.
  I solved this problem of digitization by scanning my email from the printer, then download PDF or redirect on.
  However because I cannot use the hp printer installation software in my old system and can not find the PF OSX10.4 and only have the headdress of scanning for previous printer I don't think that any other option is open for me.

• Printer HP Photosmart 5520 range.

  Bought yesterday over printer and put into place for wifi.   It was working fine.   Turned it off last night and today he won '; t even turn on!

  Suppose that you have unplugged the unit and plugged in.  If it's still working now, return it for a replacement.

• Problem of printer c310a with minimac on my network connection home

  I spent all last night trying to get the new hp photosmart printers to print from the

  tray of the printer. It is installed and it printed a sample image that came on the front windows

  the printer photosmart c310a that my husband is connected to its minimac (10.5.8).

  However, while it will print on regular 8 1/2 x 11 paper, it not an image print on

  the mac mini with phototray paper. We tried affecting all types of and paper size

  paper photo 4 x 6,

  My network printer is down and is a c309g and for a while this morning, it wouldn't

  print online, but I cut the router (linksys e1200) and printer, cut that both turn it back on and it

  has worked well.

  I still don't know what to do with the new printer (photosmart c310a) on the floor with my husband

  MiniMAC and he does not either. (See paragraph 1 above) Night before last we spent hours

  Configuration printer until I found the password on linksys e1200 (Cisco page). Then printer worked, but

  Displays only the samples of images that appear on the window on the printer using phototray paper.

  Need free help!

  Sing Dixie

  OK, you didn't say what software you use to print.  On your Mac Mini, I will assume that it is iPhoto.

  Make sure that when you start to print, select the paper size AND photo size in the drop down menus.  If you select a photo 4 x 6 just, but do not specify the size of the paper, it will use the default value (8.5 x 11).

• A60 w/Vista64 and loss of network connection 4 GB... (unsolveable)

  Hello

  Don't know if someone else have stumbled upon this problem, or know any quick fix for it. One of my desktop at work, an A60 - 8991 - 36G, is used as a testbed Vista64 and to get the most out of this system, we wanted to up the memory and got chips of memory 2 GB and installed... When running with the chips of memory 2 x 2 GB Gigabit network card stops working, run it with 1 x 2 GB or 1 x 2 + 1 x 1 GB and it will work perfectly.

  When running with 4 GB the BIOS of the system of reports / Vista64bit reports 4 GB and 3 GB. Installing the latest version of the bios (2NKT31A), and Vista works with the latest version of windows update fixes and all the drivers have been udpated.

  Lenovo/IBM has forgotten to upgrade their BIOS to support 64-bit addressing and memory allocations? Or the system simply is not 100% compatible with Vista 64-bit or 4 GB memory inserted?

  -Arnvid-

  Just talked to Lenovo/IBM Global Services and their response was... «Buy a new motherboard, this model supports only 3.2 GB of memory»

  So end of line... no point running with Vista64bit on this computer amd64