A7A84UA 2000 #ABA: help!

Similar Questions

• VS800UT #ABA: help! What external ac adapter is compatible with the HP Compaq 8000 Elite computer PC VS800UT #ABA

  I have searched for days and have not found much information on the AC adapter that that uses this model

  PC product no. VS800UT #ABA

  [Personal information]

  HP ELITE 8000 PC-ULTRA-SLIM

  I know that this PC uses a power adapter with an intelligent pin and will not work if the model is incorrect, even if the Volt amps and power are correct.

  It did not work. 4 PC beeps 2 second break times 5 average (incompatible) or defective or both.

  

  

  model: 647982-001

  Replace with hp spare: 648964-001

   

  ==

  Based on the selector hp model: 592491-001 is the only listed compatible with my PC model

  the back of my PC just above taken power said 19.5 volts

  [Personal information]

  ==

  It would work?

  I do not have it, it seems to have 592491-001 on it, but as a replacement with model number does that mean a cross between these models compatibility is one thing?

   

  

   

  Thanks in advance.

  G31, welcome to the forum.

  Here is information on HP Partsurfer parts to the United States.  It shows the power adapter.  Thus, it may be that it is still available.  Also, here is the illustrated parts and Service card and hardware reference Guide or the computer.

  Please click on the button + Thumbs up if I helped you and click on accept as Solution If your problem is resolved.

• Error installing LifeCam VX-2000. Help?

  Installed Microsoft LifeCam VX-2000 on my computer emachines laptop and it worked fine the first night, he has used to perhaps five minutes and that's it. Home from work and he has been absent from my Start menu/desktop. Okay, so I installed it again.

  He has not worked since.
  I can't find any virus.
  I used the software to remove the lifecam completely and all of the remaining files before restarting my computer and software to try again, but with no luck.

  I get this error:
  "LifeCam.exe has stopped working. A problem caused the blocking of the program works correctly. Windows will close the program and notify you if a solution is available. »
  
  Sometimes followed by this error message:
  "The application could not initialize properly (0xc0000006). Click OK to close the application. »

  It gives me troubleshooting information, but nothing seems to help. I didn't bother with the advanced material because I'm not 100% sure about what I do and don't want anything else.

  Someone, anyone, tell me what I'm doing wrong here?

  Hi KrisHodder,

  First of all I suggest you to install the drivers for the webcam using the DVD provided with the web camera or by visiting the link below.
  Download Webcam & headset software
  http://www.Microsoft.com/hardware/download/DownloadResult.aspx?category=ice&type=LifeCam&name=YFC-00001&OS=WVista_3264&lang=en

  You can also visit the following links and try the steps:
  Problems that may occur when you use a LifeCam on a computer that is running some known background programs
  http://support.Microsoft.com/kb/953692

  You receive message error "there is no camera connected" or "Initialization error", and that the video preview is empty when you start the LifeCam software
  http://support.Microsoft.com/kb/933311

  Hope this information is useful.

  Jeremy K

  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• 2000 - 2b1GNR: help disabled system

  My computer laptop 2000-2b1GNR screen is stuck on a black with blue box system is off screen of reading [70531730] please can someone replace it?

  Thank you, took me to recovery blue screen with error code: 0-xC0000001

• Model e9300z #AZ217AV-ABA: help! All files and images are missing. Empty programs

  My PC for 3 1/2 year, has been very slow for a few days. He actually hung online last night and I had to physically stop. I turned everything on time and the screen says welcome to HP as if it were a brand new computer. The homepage is not the usual.  I clicked on the Chrome and the display shows Bienvenuechez Chrome and how to put in place. Ditto for Mozilla Firefox.  Then I go to files and they are empty. Documents and photos. went. Family tree maker is there, but it also gives me the Welcome screen. I went to the original Image and it says that it has been changed in 2013 - day and the year of purchase. It seems empty. It's as if my computer has been deleted.  I backed up a month or two ago and I was actually going to save last night, but when he hung up, I turned it off. I thought that the original Image was a return to the top.  I have Norton AntiVirus.

  What can I do to recover my files? Any suggestions? Can I have a virus? or what happened? Can I fix it myself? A computer store can recover files? I'm typing this on my work laptop. Because I don't know about the use of the computer.

  Thank you all very much.

  Lindsey

  I unplugged the computer because I was worried that if the hard drive was not, that its use could write on previous data. In addition, the power in the House going on and off for a reason any. Since I'm not tech savy, I decided to hire a computer programmer rather than trying to back up my hard drive by using the adapter by myself. When the computer was reconnected overnight by the computer guy, he came as usual. All my files and pictures were back. The screen looked normal.  Yay! The computer guy said my hard drive was fine, but the computer probably had a virus 'Lotus '. I have Norton Anti virus. He ran a few malware research programs and found some viruses. It works fine now. Hope it stays like that. Thanks for the help.

• Laptop HP 2000: Please help with code

  I have a hp and asked power on password or password administartion. The disabled system code is 55614723

  Try entering the following unlock code:

  40772305

• HP 2000: NEED HELP Admin password

  Im getting code 80159127

  See your other thread:
  http://h30434.www3.HP.com/T5/notebook-recovery/HP2000-admin-password/m-p/4900028

• 2000 - 2d27CL: downgraded to win 8 to Win 7 on 2000-2d27CL help to find drivers?

  I need a driver for each one please

  PCI\VEN_10EC & DEV_5229 & SUBSYS_2128103C & REV_01

  PCI\VEN_10EC & DEV_8136 & SUBSYS_188B103C & REV_05

  Thank you

  Hello:

  You need these drivers in the order you posted the ID.

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-127099-1&cc=us&DLC=en&LC=en&OS=4063&productOid=5275371&sw_lang=

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-104622-1&cc=us&DLC=en&LC=en&OS=4063&productOid=5275371&sw_lang=

• e0m17ua #aba: help with power on password

  Stuck on the administrator password / power on the password error screen. Deactivation of the system 52284613. Phone hp customer support is terrible, one hour two run around the says that I get transferred to a supervisor until finally the contractor, Lakshmi N. with the shipping of hardware team, who lied to me, transferred me to her supervisor assumed by technical support. That women did not give me his name and hung up. Terrible service.

  Try > 43182235

• HP 2000: Hey. Deactivation of the System Code 66082030 someone can help me?

  Code 66082030 system off. It's a hp 2000. Help! Please

  @Duty17

  Enter 79980016

• Display satellite P30 with Windows 2000 issues

  I can't find a driver for Satellite P30 I'm running on Windows 2000. Windows 2000 is the only operating system, I am able to turn it on now. If someone was able to get a P30 works with Windows 2000? Help, please.

  Hello

  This laptop model has been tested only with the Windows XP operating system and it is not supported with Windows 2000. Sorry, but you won't find any display driver for this device on the Toshiba site. The only way is to try to find a driver on the site of the producer graphic CAD.

  I'm not sure but I think that your unit has "ATI MOBILITY RADEON 9700" graphics card.

• Administrators password hp 2000

  The error code is 98770720 windows 8 CV 2000 please help

  Hello

  Enter: 27658306

  Kind regards

  DP - K

• Using Windows 2000, resetting the system.

  Original title: Microsoft WINDOWS 2000 PROFESSIONAL HELP

  MY MOTHER BLESS HER SOUL HAD A FRIEND TRY TO RESET HIS SYSTEM BY CLICKING THE START KEY F8 KEY AND IT MESSED UP THE COMPUTER SO THAT IT CAN NOT GET ANY TEXT WHEN YOU GO TO PROGRAMS OR THE PANELOR OF CONTROL ANYWHERE. EVERYTHING THAT SHE GETS IS BOXES OR SPACES SO YOU CAN'T TELL WHERE YOU ARE. CAN RESET US THE SYSTEM

  Hi James Steege,.

  Support for Windows 2000 has been completed from Microsoft. For more information, you can check the mentioned link.

  Center end solutions Support Windows 2000

  http://support.Microsoft.com/ph/1131

  Hope this information helps.

• I'm running an old Dell with Windows 2000 Professional 3800 but am finding less & less compatible software.

  I'm running an old Dell 3800 on 2000 Pro but am finding less & less compatible software.

  Suggestions.

  original title: 2000 pro help

  It's time to retire and recycle that old computer and buy a new one with Windows 7 preinstalled.  Here are a few examples.

• Office 2000 envelopes

  My HP Deskjet 3520 new prints everything perfectly except the envelopes. I followed the instructions in the video and the envelpoe gets caught in the printer and eliminated again in the right direction. Looks like it's printing, but no address is printed. I use MS Word for Office 2000. Help, please.

  Joe

  This is now solved. I went to the post titled

  DeskJet 3520 (envelopes)

  and found the solution here.

  Joe