A7r2 Setup Custom White Balance

Similar Questions

• Bridge CS5 applies wrong white balance during extraction of thumbnails (only for raw files)

  Hello to all the assistants of Adobe,

  Photographer welder here. I use a Canon T2i and I've been shooting raw with automatic white balance.

  After I downloaded the CR2 files to the bridge, bridge starts thumbnail extraction. It is then that the problem begins: I watch bridge thumbnail extraction photo after photo, turning them into white balance bad one by one. After the bridge is done, I open one of these photos in Camera Raw, it shows the picture in the "custom white balance". I could go back to "As Shot". But now, each Bridge photo has custom white balance and is difficult to bridge. This screenshot shows what looks like my bridge after thumbnail extraction...

  Yesterday, just out of curiosity, I took a few photos with the settings of the different on the camera white balance. I downloaded their bridge and bridge too wrote all the white balance settings. Then I imported the same pictures (from the same files) to iPhoto, they appear with writing correct balance. Please see the second screenshot.

  The third screenshot shows a unique photo that I opened the bridge to Camera Raw and the same photo, as it appears in iPhoto, the original two.

  

  Again, this only happens to CR2 files. All TIF, jpeg files are fine.

  Any ideas?

  Thank you!

  -Wolfie

  Any ideas?

  First of all, taken of view Raw has the advantage of the evolution of the color temperature (balance of Pentecost) to what ever you like everything you shot in camera.

  It seems once you have registered a custom default setting white balance and it is applied to each new file because you said bridge to do. The best way out of this is to open a raw file in ACR and the basic right tab you see a small icon (next to the base word) submenu. Click on it and the line select "Reset Camera Raw defaults" downstairs.

  Also decide if you want to stay in 16-bit mode (you're now as shown in the blue line under the preview). If you want the chance it to 8 bits, just click on this blue line and choose your options in this menu. Just do it once for that same camera files, ACR remembers the settings for you.

  Using 16-bit mode has advantages when the color corrections using critical (but you should also replace the ProPhoto color mode in my opinion). The downside is that the 16 bit doubles compared to 8-bit file size

  Having put default ACR should immediately make your thumbs by building of new inches and previews, but if not, you must choose purge the cache for the file from the menu Tools / cache / purge the cache for the file. Now the new settings will apply.

  It may take a while so let bridge do its job properly before starting other jobs in bridge (see the activity bar downstairs left to check if the bridge is still cached).

• SOS... I don't know what is happening, but when I import the photos to LR5, looks like I have a "Preset" which I did not and the white balance becomes 'custom '... You have an answer that I can solve this problem? Thank you.

  SOS... I don't know what is happening, but when I import the photos to LR5, looks like I have a "Preset" which I did not and the white balance becomes 'custom '... You have an answer that I can solve this problem? Thank you.

  Possibly, you have made changes to your 'by default develop settings'. The default WB in Lightroom should be "under the shot" to view this selection has recently imported a file raw in the develop Module, click history in the left panel, click on the first import. (see screen capture) and then see what settings have been applied to import for the white balance it must be 'in the know '.

• Lightroom automatically changing the white balance of the "as shot".

  Suddenly, my lightroom is changing "as shot" white balance to "custom" on the set of my RAW files.

  often, there is no real change in the balance of whites, etiquette only. but in about 10% of cases the white balance itself changes.

  clues? Thank you

  Trash the LR preferences file. It will be rebuilt the next time you open LR.

  Preferences and other locations of the file file | Lightroom CC and 6

• lightroom cc white balance options missing

  Hello

  Lightroom cc (2015.4) on my Mac pro - develop module, white balance - retina it is now missing the cloudy, tungsten, etc (which I got recently) and options only concerts - shooting, auto, custom. Same is true in the library module, quickly develop

  Everyone has noticed this?

  Any suggestions to get it back?

  Thank you

  Chris

  As a result, automatic and custom are the only option, you get if you shoot JPG.  Other options are available for RAW files.

• Please advise: I have a problem displaying RAW files correctly on Lightroom. The thumbnails look good before the import, but once that Camera Raw is applied when importing they turn green and are cropped. I'm shooting to the CR2 format using custom white

  

  

  HannahMahassen wrote:

  Open the images in iPhoto gave correctly colored final images.

  iPhoto is only to display and to use the preview JPEG embedded within the raw file.

  https://support.Apple.com/en-us/HT202428

  HannahMahassen wrote:

  Unfortunately, the toolset is not so advanced that LR would prefer being able to edit my photos out there. Any suggestions as to why it cannot interpret the correct values in files? Camera Canon G15 btw.

  If you use the auto white balance setting in the camera it is remove the Green tint in the embedded preview raw file (JPEG files). LR White Balance tool is more limited in range compared to the correction of the White Balance in the camera. On your screenshot posted the tint WB slider is set to 150 (Magenta), but clearly it is not sufficient to correct the under cast of green water. You can create a custom profile of DNG to extend LR Temp WB and range of hue as shown here:

  Lightroom: Setting the white balance for underwater photography

  One of the Green images issued by export to the DNG format and open it in Adobe DNG Profile Editor. The corrections described above and then name and save the new DNG profile in below the location of the folder. Restart LR to load the new profile of the camera.

  Lightroom 4, 5, 6 and CC

  Windows Vista through 10

  C:------users------[your user name]-AppData-Roaming------Adobe------CameraRaw------CameraProfiles------.

  Mac

  Macintosh HD / users / [username] / Library / Application Support / Adobe / CameraRaw / CameraProfiles /

  Lightroom 1, 2, 3

  Windows XP

  C: \ Documents and Settings------all users------Local Settings------Application Data------Adobe------CameraRaw------CameraProfiles------.

  Windows Vista or 7

  C:------ProgramData------Adobe------CameraRaw------CameraProfiles------.

  Mac

  Macintosh HD / Library / Application Support / Adobe / CameraRaw / CameraPro! them.

• White balance presets

  Whenever I open a raw image in Camera Raw in PES 12, the drop-down list of the white balance contains only 3 choices, As Shot, automatic and custom.  I remember a time before you see a longer list of presets. What I am doing wrong?

  Mac OS X 10.9.5

  Canon T3i

  You open iPhoto? Try directly

  Launch the Finder and go to your images folder

  Control + click on a CR2 file and choose:

  Open with Photoshop elements editor 12

• How to define the details of the White Balance metadata Bridge Cs6 shot with 5 d MarkIII?

  Is it possible to get detailed information of the White Balance setting in the bridge metadata?  I get only "custom"; My instructor at the College needs more detail in my contacts boards.

  Thanks for any imput

  Is it possible to get detailed information of the White Balance setting in the bridge metadata?  I get only "custom"; My instructor at the College needs more detail in my contacts boards.

  Thanks for any imput

  You can't get this info in a Board-contact, nor is it easy to get other then look at the setting of the device you used to shoot files. Maybe it's somewhere hidden deep in the exif data, but I can't find it with the exact number.

  Shooting Raw these WB figures do not apply because you can adjust the color temperature and tint to what you want. Taken jpeg, your options are limited due to the fact that the raw data is already processed and the evolution of the effects of temperature and color of the entire image.

  Try to shoot a Raw and jpeg together from the same scene. The one with the light of day and the other with artificial light conditions. (personally, I put my WB set closed at 5,500 but with the auto settings, you can also see the difference) Try to fix the jpeg and Raw file in ACR and see what I mean.

  And to be honest, if your instructor at the College would like to have what he should tell you also why he wants to and how you can put it back...

• Adding photos to change the white balance

  When I add photos in Lightroom 3.2 from my hard drive, thumbnails have the original white balance, but imported and all images have a yellow tint.  My develop settings are set to None.

  It is difficult to understand the details that you have given to date, what is the problem. From my experience, there are three possible reasons:

  1. corrupt monitor profile. The fact that the photos seem to 'well in Windows' does not mean that this reason may be excluded. Most of the applications in Windows are not color management and cannot be overturned by a screen maybe corrupt profile. And even if they are, they might not behave in the same way as Lightroom with some of the ICC v4 profiles.

  To prove that this is not a matter of profile, make sure you remove the monitor profile form display properties or replace it with along with the sRGB profile. Or, after a shot of creen tinted yellow to image in the development with the visible histogram module. If the historgram has the yellow tint also, then - it's profile.

  2. develop predefined import or custom default to develop. Check if you do not apply a develop preset import, or if you have applied a default of custom development. Select an affected image that has not been adjusten in Deleop somehow (the + / badge is missing on the thumbnail) and check each slider on each Panel is equal to ZERO or to the default position. Check if wihte balance is set to "As shot" rather than "Custom".

  3 Lightroom rendering is very different from your camera. Yet one thing that's confusing beginners is how Lightroom rendering is very different from what they see on the LCD screen of the camera or camera previews incorporated which appear briefly after importation, before Lightroom manages to make its own version of the RAW file. I guess that is not the case here, since you say you are having the same problems of JPEG files. But, just in case where, thanks to upload a file raw for us to consider here.

• New to RAW, the question of the white balance

  I have been using Lightroom for years, but with my camera, display JPG images only. I started now work with my D90 RAW (NEF) files recently and has difficulty from beginner.

  LR 2.6, Mac OSX 10.5.8, iMac 24 "2.8 GHz

  The problem which brings me here is that I just did a shoot without setting a white balance. Shot JPG & NAVE and I see that Lightroom is extrapolating values AWB, that the camera is brought on the NEF files "As Shot". For a series of similar images, I found a white balance that seems to work. I set on my picture selected, shift-select the rest and try to SYNCHRONIZE the balance of whites for the other images.

  Do not. World Bank of rest "As Shot" for the other images, and in every sense, following the camera. Does not help items synchronized to integrate "treatment (color).

  How can you "synchronize" the white balance with NEF files, please?

  Thanks in advance.

  When using the sync function and you select an image that the WB is under the gun and copy this to other images it will copy 'under the gun' for the other images not the real parameters of Kelvin of the first image. It is as expected. You make a slight modification to the image that you copy so that it is now a custom setting, and then synchronize with the other image that you want to apply the new settings.

• DSC-HX200V color white balance off

  I sent this service. I remembered the message board here, so I thought I would post it.

  I just bought a new DSC-HX200V 20/06/13. He spent the day 14 back. The colors are far from many times. White will look BRIGHT yellow, yellow will be white or green. It's little like he thinks it is in one of the modes of effect as vives/pop colors I've tried setting the WB '+' and it will help a little. I tried different modes of settings for the White Balance, i.e. the Sun, clouds, etc., but most of the time, it only gets worse. I tried "SET white balance," where you set it to something like the white paper. Which works fine until I turn it off and I have to re - set again once I turn it back on. (I'm NOT talking to different conditions, but just turn it off and on again in the same conditions.) Shouldn't it be adjusted to these conditions?

  BTW, I'm in Cape Coral, Fl 33990. Is it all local can I take it that it is verified?

  LeapingGnome

  Yes, it remains on the "One Push" when it turns back on... or whoever it is on when it is off.

  ("it could mean that you might have to re - calibrate the WB custom everywhere.")

  That wouldn't work too well asking time to stop so I can re - calibrate whenever it turns on.

  Check out my other post on ISO stuck and have to do a reset.

  About how long is the u-turn on sending in? Who pays for the shipping? I do not think go threw it on a device that is only 3 weeks. Being then without it.

  Thank you

  Leaping GNOME

• iPhone 7 problem of camera Auto White Balance

  Hi guys, got my new iPhone 7 and had been shooting a lot of pictures with it. I noticed that all my whites in my photos appear yellowish and sometimes yellow in my photos may appear to be white / or with deep shades of yellow. I had attached 2 photos I took of a white wall in my office. 1 was captured by immediate shot in the camera application, while the other was shot after the camera go off focus. Not sure if it is a problem of software with the White Balance automatic camera or a hardware fault. I hope to hear advice from the community!

  

  

  I have iPhone 7 more on her white balance seems also more hot (more yellow) than the iPhone 6 s more.

  Friends with iPhone 7 also reported the same problem. Photos of the iPhone 7 more looks unnecessarily hot and yellow tinted.

• white balance and other options change

  Hi, I've been away from taking pictures for awhile (focusing on FCP - X & videos). I've noticed recently that Apple has moved things from iPhoto to Photos. Whatever... My biggest concern is how I color balance and make the picture white balance? I've lived everywhere I thought it would be, but not luck. Can someone advise me on how to make these pictures? If this isn't the case, I can do them in iPhoto and continue to use it, or I don't expect too much from Apple?

  I always iPhoto V 9.6.1 addition Photos V 1.3

  If there are tutorials or somewhere you can direct me to know how to deal with this change, I would be very happy.

  see you soon,

  Jack

  Photos done editing capability than iPhoto.  However, you must go in the adjustment mode in the edit window and click on the button Add blue.  Then check all the items in the list:

  

  and click on Save as default down.  Now, you will have the following in the setting mode:

  

  The function address is in the mode of culture.

  

• Satellite Pro L650 series - the error screen white balance

  Hi all
  I use a Satellite Pro L650 series. When I use the laptop for several hours, my screen becomes bad white balance. In detail, the screen clears so dazzling with the strange white color. If I open a Web site, the pictures on the website becomes blurry images.
  If I put the screen in blue, she can't make easy the dazzling color, but if I put the screen in white or green and yellow, then it becomes abnormal colors and fuzzy.

  I have to restart my computer, and this problem can be solved.

  Is there anyone encounter this problem like me?
  Could you share to me what is the problem? and what is the solution for this problem?

  Thank you very much

  Hello

  Have you noticed this screen problem laptop with mains running or simply using the battery?

  I read about the problem of similar laptop screen which was related to the Intel display power saving technology.

  In this case, you could solve this disabling this feature. Go to Intel display panel - conservation power source/battery - power tab function - saving technology display and uncheck this option.

• Can anyone recommend an app for white balance?

  I would like white balance to the photos of items for my online store. Can anyone recommend an app that can make white balance?

  On Photos white balance is not sufficient to your needs?

  You can set it to balance the color using neutral gray as a sample or a skin tone.