about 1400 and 1500 outdoor, cisco access to the no doubt

Similar Questions

• How can I download the drivers for a processor that crashed and does not have access to the internet

  How can I download the drivers for a processor that crashed and does not have access to the internet.  The drivers seem to be the problem.

  How can I download the drivers for a processor that crashed and does not have access to the internet.  The drivers seem to be the problem.

  First of all, please note that you mean a computer, not a cpu.  "CPU" means "Central processing unit". In modern personal computers, the CPU is a relatively small chip, an integrated circuit. It is located on the motherboard inside the computer case. It is not the case itself, nor is it the total computer, which includes the case and what it contains.

  Download drivers on another computer and put them on CD or thumb. Bring them to the computer in question, and then copy them there.

• Acrobat Reader DC will not install. It goes about 85% and stops with a message that the file I am trying to achieve is on a network and not available.  Totally frustrated that many files need this program to open.

  Acrobat Reader DC will not install. It goes about 85% and stops with a message that the file I am trying to achieve is on a network and not available.  Totally frustrated that many files need this program to open.

  I got this program for years.  Update Windows 10 and after nothing more than headaches with he returned to Windows 7 and it is then Acrobat has stopped working.

  Hi lindat7439924,

  There is no uninstall for Mac Reader program. You can directly delete the application from the Applications folder, which is just trash/Applications/Adobe Reader.app.

  Then you can download Adobe reader from here: http://get.adobe.com/reader/enterprise/

  Kind regards

  Meenakshi

• Hello. I bought creative suite and it downloaded on my computer, however, a few days my computer crashed and I got of him having wiped, and so I lost access to the creative suite. I was wondering if there is a way I can re - download the NICU programs

  Hello. I bought creative suite and it downloaded on my computer, however, a few days my computer crashed and I got of him having wiped, and so I lost access to the creative suite. I was wondering if there is a way I can re - download programs using my serial number?

  Other downloads

• Have been locked my apple account and do not have access to the email recovery. Someone knows what to do?

  I recently bought a new iPad Air. When I went to buy a game, that he told me that I have to put in my answer to security question I tried to do, but I got them wrong because I did not in so long. He ends by me locked my account and asked me to send an e-mail to the e-mail address of recovery that I could not access because my step mother had set up the account for me and it looks like she has put in her e-mail. I do not see my father and my step MOM more, so there is no way to get access to the email account. Any help is greatly appreciated.

  You must contact the Support of your country to get reset questions: Contact Apple for the Apple ID account security support

  If your country is not on this page, then try this form to contact Support: https://www.apple.com/emea/support/itunes/contact.html

  When they have been reset you can then update your email address of relief for possible future use: on your Apple ID - Apple Support email addresses

  Or you might be able to change to 2-step verification: frequently asked questions about two-step for Apple ID verification

• Win 7 Pro - make a name of user and password request when accessing to the server computer in the workgroup. Credentials, then considered non valid.

  Recently bought a Dell Dimension 3847 with Windows 7 Pro to replace a workstation that is connected to a network that uses Windows Server 2003. I already set up two other PC's (not same model) with Win 7 Pro, for existing users and had no problems whatsoever. The user of this workstation is an existing one (implemented as an administrator).  I've set up his account and she joined the working group. The other computers in the workgroup are listed under network location. However, when I tried to access the server computer in the Working Group, I got a pop-up window asking for a username and password. This would not have taken place. However, I entered the username and password for that particular user and received a message that the user name and password were not valid. I set up my user account (it has administrative privileges too), on this computer, joined the Working Group, Windows recognizes the other computers in the workgroup, but when I tried to access the server computer I got the same pop-up and had the same problem with my credentials not being recognized. While remaining under my user name, I tried and then access the server computer again but when I arrived at the prompt for the user name and password, I used the 'Administrator' user name with the appropriate password (the credentials used to connect to the server computer) and it worked. I registered to the account of the other user and used the same method to access the server and it worked as well. Any ideas why the user credentials, other than the administrator account, are not recognized?

  Hello

  Sorry for the late reply.

  This problem is better suited in the TechNet forum where we have experts working on the same topic.

  Please post your request in the below link:

  https://social.technet.Microsoft.com/forums/en-us/home

  I hope this information helps, get back to us if you need help with Windows.

  Thank you.

• home network problem: I am running Windows 7 and you want to allow a PS2 and XBox 360 to access on the pc programs

  I am running Windows 7 and you want to allow a PS2 and XBox 360 access programs on the pc. Is this possible? How can I make my pc a media for a network server home?

  Hello

  Thank you for writing to Microsoft Communities.

  I suggest to check the following links and check if it helps.

  Connect to Bluetooth and other wireless or network devices: http://windows.microsoft.com/en-US/windows7/Connect-to-Bluetooth-and-other-wireless-or-network-devices

  Add a device or computer to a network: http://windows.microsoft.com/en-US/windows7/Add-a-Bluetooth-or-other-wireless-or-network-device-frequently-asked-questions

  Establishment of a network domestic: http://windows.microsoft.com/en-US/windows7/Setting-up-a-home-network

  You can also keep in touch with the Play station 2 and the Xbox 360 support.

  Please follow these recommended steps and post if you still experience the problem.

• Best way to extend the network of Apple using Cat5 and wireless, but with access to the same network

  Appreciate any help here.

  I need to extend my network coverage for the part out of my house where the current signal does not cover.

  I have a Time capsule in the office connected to my Modem and then created a wireless (XXXX) network that connects to the extreme in my front room... .well when I'm in my room before the signal does not increase when I go near the extreme... and maybe it's that I'm still picking up XXX to my Time Capsule wireless network.

  I'm just a Cat5 cable around the House and I was wondering if I can connect the TC to the extreme via CAT5 and therefore the extreme would be able to stream my network wireless XXXX?

  If I then want to connect to another airport (explicit / extreme or even TC) in the part of my house which currently gets no signal... then do cela via Cat5 to the EXTREME at the 3rd device... or must it come directly from the TC?   (and again... the 3rd device will also be able to broadcast the network XXXX?

  Ideally, I want the network to be possible STB and flavours around the House, and I think that the connections between Ethernet devices would accomplish that... but I also need the i-devices, streaming boxes etc. around my house to then access the XXXX wifi network I have printers, VPN, etc all together towards the top on.

  Oh... and 1 other point, I have a cisco 8port 10/100POE switch managed... which I would also like to include in the network to connect to the servers and devices IP etc... is - it possible... and that has to be directly connected to the time Capsule and could I still use it to take place between the TC and the 3rd Apple Airport device... as above?

  Hope that makes sense... but please let me know if you need more details.

  I'm just a Cat5 cable around the House and I was wondering if I can connect the TC to the extreme via CAT5

  Yes. Hate to be picky here, but I hope you'll use CAT5, CAT5e cabling being quite a bit obsolete.

  wireless network and if so the extreme would be able to stream my XXXX?

  Yes

  If I then want to connect to another airport (explicit / extreme or even TC) in the part of my house which gets currently no signal... then do cela via Cat5 to the EXTREME at the 3rd device

  Yes, but it would be preferable to cables to connect the 3rd to the main TC, if that's an option.

  or does have to come directly from the TC?

  No, but it would be better if she could, if this is an option.

  and once again... the 3rd device will also be able to broadcast the network XXXX?

  Yes

  and I think that the connections between Ethernet devices would achieve this

  That is right. Ethernet is always the best choice in terms of performance.

  but I also need the i-devices, streaming boxes etc. around my house to then access the XXXX same wifi network I printer, VPN, etc all together towards the top on.

  That should work well.  However, you may not aware that most of the PC and iOS devices not 'automatically' between different wireless access points as they move from one place to the other.  For example, you have your iPhone near the time Capsule, so he'll be looking for a strong signal from the time Capsule. If you move the close AirPort Extreme iPhone or any other device 3rd... the iPhone usually will stay connected to wireless Time Capsule... even if a stronger signal may be available in another wireless access point. Nature of the beast with IOS devices.

  Thus, with most of the PC and iOS devices, you will have to get used to temporarily turn off the WiFi on the iOS device when you move from one place to the other, then re - turn on WiFi once the device is close to the other wireless access point. The iOS device then generally will pick up the strongest signal from the nearest access point.

  Portable Mac computers will generally do a good job of automatically 'switching' to pick up the best signal of different access points in you walking the laptop around the House.

  I have a cisco 8port 10/100POE switch managed... which I would also like to include in the network to connect to the servers and devices IP etc... It is possible.

  Yes, but the Time Capsule and AirPort Extreme Gigabit Ethernet ports or 10/100/1000, then the switch is going to limit the maximum speed on the network at 100 Mbps when the devices are capable of much higher speed.  If you plan to invest in the installation of Ethernet wiring around the House, then you also want to invent a new Gigatibit Ethernet 10/100/1000 switch, because it will allow up to 10 times faster compared to a 10/100 switch network connections.

  can do this via Cat5 to the EXTREME at the 3rd device... or need to come directly from the TC?

  Yes, but it would be best to connect the switch to the time Capsule if it is an option.

  and could I still use it to take place between the TC and the 3rd Apple Airport device... as above?

  Yes

• GPO: CD and DVD: deny write access prevents the user to use their USB Pen drive, but other users or ok

  My users have secure readers Pen who throw a CDROM partition with a secure logon application that decrypts the key to mass storage USB the USB on successful logon. The problem I have is that users who install the USB cannot initialize then the app launcher CDROM to enter their password to access the element of the rendering it useless USB mass storage.

  However, any user who has the same type of USB key that plugs in to the endpoint that has already installed the drivers is able to access their own USB or the other users of USB stick (knowledge by providing the password).

  So I've isolated the problem being down to the presence of the GPO setting shown above on the removable storage access policy and by not having not this policy in place when a user installs the USB key, they have no problems, but I can't find a way to clean a user that is already broken, even if I delete the GPO from this user , remove their local profile so that they start as a new user (no roaming or other data) and use a variety of utilities such as USBOblivion to clear the registry and the file system of the USB and installation. When the original user logs back and then installs the USB again, they have the same problem, but no one else does. I have the same problem if I try with another user or administrator as the first user after "clean it up". Everyone can use the pen drive except the user who originally installed when the GPO was in place.

  If I move the user to a new endpoint or rebuild their end point, then they have no problem being the USB setup and then use it because the GPO has been deleted, so what I need to know, that's what he's talking about installing USB and the GPO which is tattooed somewhere in Windows and how can I remove it?

  Hello

  Welcome to the Microsoft community.

  I suggest you post this query on the TechNet forums.

  You can refer a link below to send this request.

  https://social.technet.Microsoft.com/forums/en-us/home?category=w7itpro&filter=AllTypes&sort=lastpostdesc

  Let us know if you have a Windows problem, we will be happy to help you.

• Prevention and management of concurrent access to the same port VISA

  Hello

  I currently have a VI with three parallel loop: a loop for the UI with a structure of the event; a loop for the collection of data; and a loop for data tracing.

  The loop of data written to the serial port to put the camera to send a probe reading update. The device sends the sensor updated playback and loop bed devices response data collection.

  I have a situation where the user interface loop must also 1. write to the same device (via the same port), 2. read the answer, then 3. write using the response data and user input. My problem is that the user interface loop is reading the response of devices in the loop of data collection rather than the response to the user interface loop.

  So the problem looks like:

  loop data collection: how hot is?

  device: 30 degrees Celsius

  loop data collection: how hot is?

  device: 30 degrees Celsius

  loop data collection: how hot is?

  loop UI: what color is the sky?

  device: 30 degrees Celsius

  user interface loop: Ok! the color of the sky is 30 degrees Celsius.

  device: Blue

  I'm tempted to look for a solution where the user interface loop interrupts somehow the other two loops while it is writing and reading on VISA port, but I doubt that it is the appropriate solution. My code is big enough, but I can try to view if necessary. I remember seeing messages from people with similar problems, but it seems impossible to find today. Thanks in advance for the help!

  Famous engine Action Nugget of Ben is always a good read. http://forums.NI.com/T5/LabVIEW/Community-Nugget-4-08-2007-action-engines/m-p/503801

  Now that you've been through that we will develop a specific EI style that I call a Module on resources.  A RM exposes only the functions required by a given application to using an external resource while protecting sections of code of "criticism".  In your example even if the VISA operations block several appellants to write simultaineously, you did not protect the operation "Request" critical so readings were responses to the caller of evil.  The 'query' is essential and must block access to other operations until the query is complete.

  Look at this "Very basic" RM implementation that does not protect the critical query operation:

  

• My computer is broken and I only have access to the records and am unable to open any program. Is anyway I can recover my favorites - because I'm unable to open 4 Firefix for export. Thank you

  My computer was originally with Windows Vista, however I am a linux called Ubuntu OS in order to recover my files and folders. In Ubuntu, I am unable to open the Vista of Firefox version and there for cannot export.

  http://support.Mozilla.com/en-us/KB/recovering+important+data+from+an+old+profile

  Your old profile is located here in Windows Vista and Win7:
  
  drive: \Users\Windows login user name\AppData\Roaming\Mozilla\Firefox\Profiles\profile_name

• Open the file 'C:\Windows\system32\ctl3d32.dll' could not be please check your disk is not full and that you have access to the destination directory. Access is denied.

  I am running Windows 7 Ultimate x 86 version and tries to install exPressit (by Memorex) is a very simple program and I just reinstalled Windows 7 just before so I have a new facility, 230gig of free space and 3 GB of ram so it could just be no proplem. Ive tried running as administrator and also replacing compatibility down to xp and Vista. I currently have 3 other computers using this program with Xp Proffesional, Windows Vista Ultimate, and Windows Vista Home Edition with no problems at all, so any ideas would be great cause if I don't find a solution quickly, that I have to downgrade to Vista.

  You should contact the support of exPressit on the compatibility of Windows 7.

  Messages rating helps other users

  Mark L. Ferguson MS - MVP

• Two questions about ASM and GR 11, 2 installation of the grid

  DB version: 11 GR 2
  Operating system: Sun Solaris
  
  1. in GR 11, 2, after the installation of network infrastructure, succesfull ASM instances starts automatically in all the nodes. Right?
  
  2. just after the end of the grid infrastructure installation, I tried to connect to the DSO. But I was invited for ORACLE_HOME rather than GRID_HOME. Why is this? ORACLE_HOME is the location of the client software of RDBMS. I started not to install some RDBMS again.

  $ ORACLE_SID=+ASM1
  $ export ORACLE_SID
  $ sqlplus / as sysasm
  sqlplus: not found
  $ /u03/grid/bin/sqlplus / as sysasm
  Error 6 initializing SQL*Plus
  SP2-0667: Message file sp1<lang>.msb not found
  SP2-0750: You may need to set ORACLE_HOME to your Oracle software directory 
  
  
  
  $ ORACLE_HOME=/u03/grid/
  $ export ORACLE_HOME
  $ /u03/grid/bin/sqlplus / as sysasm
  
  SQL*Plus: Release 11.2.0.2.0 Production on Thu Nov 11 15:20:16 2010
  
  Copyright (c) 1982, 2010, Oracle.  All rights reserved.
  
  Connected to an idle instance.

  Hi Garry,

  1. Yes, it should start automatically. You have defined all variables before you start the installation?

  2. the variable ORACLE_HOME must be set to the location of GRID_HOME for the user environment of GRID and the location of ORACLE_HOME for the oracle user.

  Kind regards.

• Very simple question about Mac and find out which version of the player

  Hi, really quick here for Mac or Mac users familiar question: How can I find which version of Reader is installed on a Mac? It should be of Mac OSX. I'm just so incompatible Mac (and the guy using it is not fine with it) and I don't know where to look?

  Thanks a bundle

  Mac does not come with Adobe Reader, they come with a program called Preview. The best way to know which version is on a given computer is to ask the owner! If the owner does not know that they can select the file and then on the file menu or by typing the command - I they can activate the command read information that will produce a window with the version information and much more.

• Termination of the client PIX VPN and Internet access from the same interface

  Hello

  VPN remote users connect to PIX (7.2) outside interface, but need to have these clients to access the Internet through the PIX outside interface as well. Need this because PIX IPs is registered and allowed access to some electronic libraries. One way would be to set up a proxy within the network and vpn users have access to the Internet through the proxy, but can it be done without proxy?

  Yes, public internet on a stick

  http://www.Cisco.com/en/us/products/HW/vpndevc/ps2030/products_configuration_example09186a00805734ae.shtml