About a minute after I turned on my computer it flashes then goes dark

Similar Questions

• Remote works for about 5 minutes after I turned on my Qosmio F60

  Hi there all the

  My Qosmio F60 remote works for about 5 minutes after I turned on my pc...
  How can I make it works normally?

  all Ty<>

  Hey,.

  And after these 5 minutes, you get an error message or what happens?

  Either the remote or not so did you start some applications after 5 minutes they could affect this function?

• Two minutes after I turned on the laptop Vista freezes

  My Vista freezes about 2 minutes after I turned on the laptop. Then it does not allow me to do something, so I have to cut the current, do not use the close option. I don't know if it is a common problem in Vista or if it's just my laptop.

  Download or leave the laptop on for a very long time will help this problem?

  Thank you.

  Hello

  Usually, the OS should no freezes but sometimes if the temperature of the laptop is high it can happen that the laptop will not answer. Sometimes some installed 3rd party applications could have a bad influence and can cause freezing.

  I recommend reinstall the Vista from the Toshiba restore CD.
  If the laptop freezes still after the new installation you must contact the technician of the laptop of the ASP in your country.

  Good bye

• Computer laptop freezing one minute after I turn it on.

  Original title: the laptop freeze

  my computer freezing guard about a minute after I turn it on, ive tried a bunch of different controls and analyses and even removed several things that were recently installed on my computer, I don't see anything else to do to try to fix it, it works fine in safe mode but freezes even with a clean boot in normal mode

  Start the computer in safe mode with network and download and install Malwarebytes (free version for individuals only), updated definitions and run in safe mode. Disable other security software while you do the analyses.
  http://www.precisesecurity.com/how-to/HT-smodewnet.htm
  http://www.Malwarebytes.org/products/malwarebytes_free
  Download and run SuperAntiSpyware (Free Edition)
  http://www.SUPERAntiSpyware.com/download.html

  Are registry cleaners or optimizers system on the computer?

• I have a TouchSmart 300-1007 that performs a hard block after about 30 minutes to be turned.

  I have a TouchSmart 300-1007 that performs a hard block after about 30 minutes to be turned.

  Windows 7 Home Edition, the stock machine, even if it does even if I start in diagnostics (F9 at the start of the BIOS), so I doubt it has nothing to do with the operating system.

  By "hard block", I mean the screen goes black, the wireless keyboard is not flashing blue light on the USB FOB and the power button only turns off although it by hand for 30 seconds. I have to pull the power cord to turn it off.

  It started shortly after the application of the 5.12 version 2A8E update motherboard BIOS published 2011-03-24. Never should have done that; experience shows that I have more problems than improving when updatng BIOS' are.

  No heat problem (air vents are clean as a whistle). I suppose the best thing would be to restore the BIOS but I don't know if it is possible, or how to do it.

  This is my daily workstation and is now effectively a boat anchor / deadline / brick.

  Any ideas?

  Yay for me. My dose of GENIUS has had this problem for THREE DAYS running machine now without any problem whatsoever.

  It it CERTAINLY evil genius of this machine, no doubt.

  Other victims of the Touchsmart series should regroup and get some kind of compensation. I know that I had to buy a new computer to replace this one when it stopped working, and I spent a TON of time to solve the problem (it would be an easy solution to the factory; not so easy at home)

• I get the message "iPhone is disabled try again in 24,145,404 minutes after having turned it on."

  I get the message "iPhone is disabled try again in 24,145,404 minutes after having turned it on."

  Anyone know what this means?

  Which sometimes occurs after successfully entering the access code to many times. See this support article for help. -AJ

• Computer has a blue screen crash about 5 minutes after each start up successful

  Computer has a blue screen crash about 5 minutes after the start of successful with the error msg: Stop 0x0000008E (0xc0000005, 0xb7e4571d, 0xb1440748, 0x00000000) Atapi.sys-address b7e4571d base at b7e3b000 datestamp 48025396. Any help is appreciated.

  Hi jason12685,

  1. Did you the latest changes on the computer?
  2. When was the last time it was working fine?

  Method 1

  Possible causes of this error include the following:

  • Drive hard damage
  • Problems of material General configuration with the BIOS, memory, hard drive, or with other devices
  • Incompatible device driver
  • Incompatible software

  Check out the articles below and try the steps mentioned, check if it helps.

  You receive a random "0x0000008E" error message on a blue screen in Windows XP

  http://support.Microsoft.com/kb/827663

  General troubleshooting for an error message that you receive randomly in Windows XP: "Stop 0x0000008E"

  http://support.Microsoft.com/kb/945658

  Method 2

  I would also say that you update all the drivers for hardware devices on the computer by visiting the manufacturer of the computer or the device manufacturer's Web site.

  How to manage devices in Windows XP

  http://support.Microsoft.com/kb/283658

• System freeze about 5 minutes after startup. Can move the mouse, but can't do anything else.

  Computer Compaq laptop turned on updates of Windows, firewall Windows, AVG anti-virus, etc.
  He has suddenly frozen 8 months ago - would not respond other than to be able to move the mouse.
  Does not "left/right mouse click" or "Ctrl + Alt + Del" or "power button."
  After a long waiting, pulled out the battery/power supply.

  Restarted in safe mode, was able to run AVG, but froze again.
  Has helped me select the AVG window and move it autour, but nothing else.
  Was not able to click with the right button on the taskbar to make appear the Task Manager.
  Only way to reboot was to remove the battery/power supply.

  Same thing, it is is happening whenever I start.
  System access for about 5 minutes and then freezes.

  I am able to get into the system at the start restore.
  Have a lot of personal photos on the laptop.
  Please provide a solution so that I can extract the photos and then restore the phone to factory settings.

  Thank you.

  Data recovery:

  1. slave of your hard drive in another computer and read/save your data out there.

  2. put your Hard drive in a USB hard drive case, plug it into another computer and read/save from there.

  3 Alternatively, use Knoppix Live CD to recover data:

  http://www.Knopper.NET/Knoppix/index-en.html

  Download/save the file Knoppix Live CD ISO above.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  http://isorecorder.alexfeinman.com/isorecorder.htm

  Download the Vista software from the link above.

  After installing above ISO burning software, right click on the Knoppix ISO file > copy the Image to a CD.

  Knoppix is not installed on your PC; use only the resources of your PC, RAM, graphics etc.

  Change the boot order in YOUR computer/laptop to the CD/DVD Drive 1 in the boot order.

  Plug a Flash Drive/Memory Stick, BOOT with the Live CD, and you should be able to read the hard drive.

  When the desktop loads, you will see at least two drive hard icons on the desktop (one for your hard drive) and one for the USB key.

  Click on the icons of hard drive to open and to understand which drive is which.

  Click the icon for the USB drive and click on "Actions > Change the read/write mode" so you can write to disk (it is read-only by default for security reasons).

  Now to find the files you want to back up, just drag and drop them on the USB. When you're done, shut down the system and remove the USB key.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  How to get Vista recovery Media and/or to use the Vista recovery Partition on your computer.

  There is no Vista free download legal available.

  http://www.Compaq.com/country/cpq_support.html

  Contact your computer manufacturer and ask them to send a recovery disk/s Vista set.

  Normally, they do this for a cost of $ small.

  In addition, ask them if you have a recovery Partition on your computer/laptop to restore it to factory settings.

  See if a manual provided with the computer or go to the manufacturer's website, email or you can call for information on how to make a recovery.

  Normally, you have to press F10 or F11 at startup to start the recovery process...

  Another way I've seen on some models is press F8 and go to a list of startup options, and launch a recovery of standards of plant with it, by selecting the repair option.

  You can also make recovery disk/s for the recovery Partition in case of a system Crash or hard drive failure.

  They will tell you how to do this.

  Every computer manufacturer has their way of doing recovery disk/s.

  Or borrow a good Microsoft Vista DVD (not Dell, HP, etc).
  A good Vista DVD contains all versions of Vista.
  The product key determines which version of Vista is installed.

  There are 2 disks of Vista: one for 32-bit operating system, and one for 64-bit operating system.

  If install a cleaning is required with a good DVD of Vista (not HP, Dell recovery disks):

  Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

  At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu

  http://support.Microsoft.com/default.aspx/KB/918884

  MS advice on the conduct of clean install.

  http://www.theeldergeekvista.com/vista_clean_installation.htm

  A tutorial on the use of a clean install

  http://www.winsupersite.com/showcase/winvista_install_03.asp

  Super Guide Windows Vista Installation

  After installation > go to the website of the manufacturer of your computer/notebook > drivers and downloads Section > key in your model number > get latest Vista drivers for it > download/install them.

  See you soon.

  Mick Murphy - Microsoft partner

• FF 8 freezes regularly for about 5 minutes about 1 minute after start

  I'm on a HP Pavilion DV7, running windows 7 Home Premium SP1, 64-bit, 4 GB of ram. It was also on this laptop with 7 FF. This also happens when I run in safe mode. I tried just start and not let my homepage (Google), and it still happens. Is not only FF that freezes, the grind of the whole machine to stop, and then after about 5 minutes of that Norton 360 tells me FF made a significant amount of read activity. I tried to run with disabled Norton, same result.

  After the shot, everything returns to normal and ff works normally, until the next time I got close and restart ff, or the next time that I reboot and start to ff.

  The problem persists if start you Firefox in Mode safe? http://support.Mozilla.com/en-us/KB/safe+mode

  What is with an empty profile? http://support.Mozilla.com/en-us/KB/basic%20Troubleshooting#w_8-make-a-new-profile

• Why after I turned off the computer num chance works also

  Please can you help me fix my computer

  Could you try that again once please, no information is here so I can't help you.

  'Why once I turned off the computer... also numlock works' looks that separate the 2 points, so could you please develop and provide more information.

  How to ask a question:

  http://support.Microsoft.com/kb/555375

• My Studio laptop freezes after 10-15 minutes after I turn it on. What could be the problem?

  I turn on my laptop and everything works, but it freezes.
  What can I do if it does not freeze?

  Hello

  What antivirus/antispyware/security products do you have on the machine? Be one you have NEVER
  on this machine, including those you have uninstalled (they leave leftovers behind which can cause
  strange problems).

  ----------------------------------------------------

  Follow these steps:

  Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN

  Enter this at the command prompt - sfc/scannow

  How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
  generates in Windows Vista cbs.log
  http://support.Microsoft.com/kb/928228

  Also run CheckDisk, so we cannot exclude as much as possible of the corruption.

  How to run the check disk at startup in Vista
  http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

  ==========================================

  After the foregoing:

  How to troubleshoot a problem by performing a clean boot in Windows Vista
  http://support.Microsoft.com/kb/929135
  How to troubleshoot performance issues in Windows Vista
  http://support.Microsoft.com/kb/950685

  Optimize the performance of Microsoft Windows Vista
  http://support.Microsoft.com/kb/959062
  To see everything that is in charge of startup - wait a few minutes with nothing to do - then right-click
  Taskbar - the Task Manager process - take a look at stored by - Services - this is a quick way
  reference (if you have a small box at the bottom left - show for all users, then check that).

  How to check and change Vista startup programs
  http://www.Vistax64.com/tutorials/79612-startup-programs-enable-disable.html

  A quick check to see that load method 2 is - using MSCONFIG then put a list of
  those here.
  --------------------------------------------------------------------

  Tools that should help you:

  Process Explorer - free - find out which files, key of registry and other objects processes have opened.
  What DLLs they have loaded and more. This exceptionally effective utility will show you even who has
  each process.
  http://TechNet.Microsoft.com/en-us/Sysinternals/bb896653.aspx

  Autoruns - free - see what programs are configured to start automatically when you start your system
  and you log in. Autoruns also shows you the full list of registry and file locations where applications can
  Configure auto-start settings.
  http://TechNet.Microsoft.com/en-us/sysinternals/bb963902.aspx
  Process Monitor - Free - monitor the system files, registry, process, thread and DLL real-time activity.
  http://TechNet.Microsoft.com/en-us/Sysinternals/bb896645.aspx

  There are many excellent free tools from Sysinternals
  http://TechNet.Microsoft.com/en-us/Sysinternals/default.aspx

  -Free - WhatsInStartUP this utility displays the list of all applications that are loaded automatically
  When Windows starts. For each request, the following information is displayed: Type of startup (registry/Startup folder), Command - Line String, the product name, Version of the file, the name of the company;
  Location in the registry or the file system and more. It allows you to easily disable or remove unwanted
  a program that runs in your Windows startup.
  http://www.NirSoft.NET/utils/what_run_in_startup.html

  There are many excellent free tools to NirSoft
  http://www.NirSoft.NET/utils/index.html

  Window Watcher - free - do you know what is running on your computer? Maybe not. The window
  Watcher says it all, reporting of any window created by running programs, if the window
  is visible or not.
  http://www.KarenWare.com/PowerTools/ptwinwatch.asp

  Many excellent free tools and an excellent newsletter at Karenware
  http://www.KarenWare.com/

  ===========================================

  Vista and Windows 7 updated drivers love then here's how update the most important.

  This is my generic how updates of appropriate driver:

  This utility, it is easy see which versions are loaded:

  -Free - DriverView utility displays the list of all device drivers currently loaded on your system.
  For each driver in the list, additional useful information is displayed: load address of the driver,
  Description, version, product name, company that created the driver and more.
  http://www.NirSoft.NET/utils/DriverView.html

  For drivers, visit manufacturer of emergency system and of the manufacturer of the device that are the most common.
  Control Panel - device - Graphics Manager - note the brand and complete model
  your video card - double - tab of the driver - write version information. Now, click on update
  Driver (this can do nothing as MS is far behind the certification of drivers) - then right-click.
  Uninstall - REBOOT it will refresh the driver stack.

  Repeat this for network - card (NIC), Wifi network, sound, mouse, and keyboard if 3rd party
  with their own software and drivers and all other main drivers that you have.

  Now in the system manufacturer (Dell, HP, Toshiba as examples) site (in a restaurant), peripheral
  Site of the manufacturer (Realtek, Intel, Nvidia, ATI, for example) and get their latest versions. (Look for
  BIOS, Chipset and software updates on the site of the manufacturer of the system here.)

  Download - SAVE - go to where you put them - right click - RUN AD ADMIN - REBOOT after
  each installation.

  Always check in the Device Manager - drivers tab to be sure the version you actually install
  presents itself. This is because some restore drivers before the most recent is installed (sound card drivers
  in particular that) so to install a driver - reboot - check that it is installed and repeat as
  necessary.

  Repeat to the manufacturers - BTW in the DO NOT RUN THEIR SCANNER device - check
  manually by model.

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  How to install a device driver in Vista Device Manager
  http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.html

  If you update the drivers manually, then it's a good idea to disable the facilities of driver under Windows
  Updates, that leaves about Windows updates but it will not install the drivers that will be generally
  older and cause problems. If updates offers a new driver and then HIDE it (right click on it), then
  get new manually if you wish.

  How to disable automatic driver Installation in Windows Vista - drivers
  http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
  http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx

  ===========================================

  Refer to these discussions because many more excellent advice however don't forget to check your antivirus
  programs, the main drivers and BIOS update and also solve the problems with the cleanboot method
  first.

  Problems with the overall speed of the system and performance
  http://support.Microsoft.com/GP/slow_windows_performance/en-us

  Performance and Maintenance Tips
  http://social.answers.Microsoft.com/forums/en-us/w7performance/thread/19e5d6c3-BF07-49ac-a2fa-6718c988f125

  Explorer Windows stopped working
  http://social.answers.Microsoft.com/forums/en-us/w7performance/thread/6ab02526-5071-4DCC-895F-d90202bad8b3

  Hope these helps.

• Satellite L450D-128 stops responding after about 2 minutes in Normal Mode

  Hello

  I just got a new Satellite L450D-128 running Windows 7.
  Whenever I run Windows in normal mode, all and stops responding for about 2 minutes after that the office and I have to manually turn off the laptop.

  When I run Windows in safe mode, it seems to work ok, but I prefer not having to use safe mode indefinitely.

  Anyone know how I might be able to solve this problem?

  Thanks in advance.

  Hello

  First try to retrieve the device.
  It's not difficult, and the whole process won't take long.

  Turn the unit on and press F8
  Then choose fix my computer-> Toshiba HDD recovery

  This will start the installation of the new.

  I think that this is necessary in order to check if this problem is not related to software compatibility issues

  If the question will always be present while we should follow the investigation
  I mean, in this case, that a hardware problem would be possible

• Turn off the display on 20 minutes after no response on the monitor

  I have this weird problem my computer power setting defined as about 20 minutes after the display display off turn off when you try to move the mouse and the keyboard he still see the no screen (still running fine PC no screen but no response). Meanwhile, I restart my com and still no screen (PC still works very well at the moment) but I can hear on the background when windows starts. The most amazing thing is "I HAVE FOR THE COOLING SYSTEM AND offshore power ABOUT 20 minutes, THEN IT WILL RETURN BACK MY SCREEN MONITOR".

  Hardware specification

  Model of motherboard Asus P5G41-MLX

  Intel dual core 2

  Kingdom of RAM DD2 - 4 G

  ASUS EN9500GT 1 G graphics card

  I need expertise to solve the problem of e. thanks!

  Looks like the graphics card is overheating.  Check all fans of the system work, particularly that of the graphic card.

• Key 3 C often does not work for several minutes after the start, the other keys work fine.

  I got am HP Pavilion 17-e049wm Notebook PC product #E0J75UAR for about 4 weeks now.  I bought it refurbished.  A week ago I started having this problem.  3, e, d and c keys do not work when I first start the computer all of the other keys work.  Nothing happens when they are pressed.   Sometimes I will restart the computer and they work again, other times they won't, but often will start working if I left the computer set for about five minutes after the start.

  The computer is spotlessly clean.  I've only used a dozen times or more.  Nothing has been spilled on the keyboard.

  Sounds like software for me, but what?

  I am running Windows 8.1 and no programs are running at startup, with the exception of a program start button, but the problem began weeks after installing that.

  Any ideas?

  FWIW, I called hp. They believed excluded material and had me do a full system restore. Problem persists... The things you own end up owning you they say... I guess it's doubly true if you own a hp laptop. Full day turned... One day closer to death. Thanks Obama.

• Whenever I have start Windows and run Firefox, it crashes when I enter a Web site. It continues for about 5 minutes.

  Firefox hangs on for about 5 minutes after the start of the system. Deactivation of the modules does not help.

  Hello Aram767, we are sorry to hear that Firefox crashes. To better help you, please follow the steps below to provide us with the ID's crash to help us learn more about your accident.

  1. Entered on: crashes in the location bar (this is where you enter the URL of your Web site) and press ENTER. You should now see a list of submitted incident reports.
  2. Copy the 5 most recent accident ID that you see in the accident report window and paste them in your response here.

  Thank you for your collaboration!

  More information and additional troubleshooting steps are in the article Firefox plant - troubleshoot and prevent assistance fixing crashes .