About my work

Similar Questions

• Question about not working CPU

  How will I know if the processor does not work on my laptop?

  If the processor does not work, you will not be able to start Notepad! ;)

• newbie question about obtaining work web interface 3424 and 3448

  Hello everyone - first assignment in time-

  I have a 3424 and 3448 who seems to have the same symptoms.  I am able to get both working as I want, but I am unable to get either to respond to a request for a Web page or a ping.

  Here is a copy/paste of what I see:

  Console # show ip interface

  Activity of Type status IP gateway
  ----------------------- -------- -----------------------

  IP address I / F Type
  ----------------------- ---------------------- ---------
  192.168.0.100/24 vlan 1 static

  According to my research, which should allow me to go to a browser and type 192.168.0.100 (my nic is 0.99) and access the Web page, but no Web site appeared.

  this site suggests that I should be able to ping:

  Console # ping 192.168.0.100

  but I do not see a ping response.

  I KNOW it should be easy, but I must be missing something very obvious.  after reading this I've also tried

  IP http server
  The https server IP

  no errors, but still no answer ping or Web page.

  any help or suggestion is the most appreciated!

  solved...

  two different solutions:

  (1) view of brand-net snmp-server community rw DefaultSuper

  (2) all back, start again and go with all defects, which will prompt you to everything.  Then set the ports accordingly.

• question about the work to remove the DB

  tried to delete the post of db to next
  
  Start
  exec dbms_job.remove (186);
  end;
  
  tried to test with sql developer to
  
  ORA-06550: line 2, column 6:
  PLS-00103: encountered the symbol "DBMS_JOB" when expecting one of the following conditions:
  
  := . ( @ % ;
  The symbol ': = ' has been substituted for "DBMS_JOB" continue.
  06550 00000 - "line %s, column % s:\n%s".
  * Cause: Usually a PL/SQL compilation error.
  * Action:
  
  
  also just tried
  
  exec dbms_job.remove (186);
  
  It works

  EXEC is a SQLPLUS command, you cannot use it in pl/sql:

  begin
  dbms_job.remove(186);
  end;
  /
  

  or

  exec dbms_job.remove(186)
  

  They are equivalent.

  Max
  http://oracleitalia.WordPress.com

• Question about a work-around to uninstall Windows 7 SP1 beta

  After making the mistake of making a disk cleanup after installing Windows 7 SP1 beta, the files needed to uninstall disappeared.  Everything I read says that now, the only way is to reinstall Windows 7.  Is there any type of bypass without resorting to this?  Just trying to save time, that's all.

  Thanks in advance for any help/advice.

  If all is not lost, where is

  There is no official support from Microsoft for Win7 SP1 RC. If you encounter a problem that you can't solve yourself, your only recourse will be a repair installation, or possibly a new installation of Windows. Such are the risks of installing any beta software.

• Questions about the work in real-time

  Hello.  Just a few questions on usage in real time, in fact on the swf file.

  First of all, I want to create something of a drag and drop interface.  Is it possible to have a stage act as two separate steps?  I mean, is it possible to have the left side of my step hold all the components, they are moved to the right side of the scene and placed anywhere, the user can then click on save, and only the right side of the scene is saved?

  Secondly, I'm testing a few things.  What I would do to get a type of free transform on an image on the stage in real time, in the swf file?  So once the movie is played, the user can resize any image then how they like by dragging a corner of the image...

  Cheers for any advice.

  You can use 2 container (Sprite or MovieClip) objects one on left on the right.  All display list container objects have their own scene

  jou can so easily the steps as much as you want each independently controlled placed anywhere you want.

• Could not import work in iTunes 12.4 for movies

  Hi all

  I just updated iTunes latest version of 12.4.  Every time I have try and add the work of a movie and click OK the picture that I just put in it is a party and is replaced by a black thumbnail of the video.

  I'm able to import the photo to music no probs but movies will not work.  Any advice would be greatly appreciated.

  Thank you

  DJ Bear

  Data sheet:

  MacBook Pro (Retina, 15-inch, mid-2015)

  Processor 2.5 GHz Intel Core i7

  Memory 16 GB 1600 MHz DDR3

  Graphics  Intel Pro Iris 1536 MB

  Software  OS X 10.11.5

  For both recent iTunes versions people are complained about the works of art and movies. I would look into an alternative video metadata such as MetaZ Editor.

• SD card slot does not work on Windows Vista

  I just installed Windows Vista RC1, which has just been published

  Just about everything works except the secure digital memory card slot.

  Until I installed Vista I ran the Compatibility Wizard and he said a few things that may not work, but the one that stood out was "SD Memory Card Format Utility.

  I guess that's why the memory card slot is not working?

  Anyone know how to operate? This isn't the end of the world because I can use the docking station, but his practice which he just work directly at the exit.

  Any help would be great.

  Thank you

  Maybe the new operating system Vista doesn t include the compatible driver for the SD card controller.
  Right now the Vista is not supported by Toshiba because this OS is not official on the market.

• Equium P200D - Question about running out of space on the HARD disk

  First of all, let me say that I am a Silver Surfer and don't know much about how works laptop or where it stores information!
  I don't am not in the least HI - TEC so please be gentle with me.

  I use an older Equium P200d for 1 year with two 40 GB hard drives each.
  My C drive has only 2 GB of memory left available while my E drive still has 30 GB.

  I have only 3.7 GB of programs loaded (according to the research of control panel) and I know that I have 4 GB of music.

  My query is - where is the other 30 GB missing?

  I made the Scandisc option and deleted all the stuff from there and a defragmentation procedure.

  Y at - it searches I can run to find junk I have more need?

  Any advice you can offer would be appreciated.

  Mikstan130143

  Hey Buddy

  If you are using Vista, then you should consider that Vista creates an additional partition on the HARD drive.
  It s hidden and it contains backup files in order to repair the operating system if something goes wrong.

  In addition HARD drive must also contain HARD drive recovery files (image).
  These files are required to recover the laptop HARD drive.

  So the hidden partition and the recovery of HARD drive that could be the main reason why you noticed smaller amount of space available on the HARD disk

  See you soon

• XW8400: only one of both put in correspondence Quad-cores working in the xw8400 workstation

  I inherited a xw 8400 there two matched CPU intel quad core CPU. Both work but not together I can exchange both at about and work them both but if I put one in slot 1, if I put one in slot 1, it works fine if I put both in a single work watch, if I put one in the 2 slot that it doesn't work.

  I checked the pins on slot2 with a very fine microscope and everything is as it should be-free pins bent etc..

  "I was told to update my Bios I tried to do, unfortunately without success as the flashrom will not recognise the CD/DVD-rom or USB it just says that it" is missing or the file is corrupted "

  My question is:-is my motherboard? as no other issues are obvious and why my flashrom system doesn't recognize my media? I have win 7 pro 64 16 GB of ram in the correct locations. It takes forever to load and want to know why the 2nd CPU does not appear in my system information?

  not really a geek, but will include the simple answers... Thank you

  Damianscorpio

  Thanks Big_Dave,

  As you suggest I have it posted on the Enterprise business Forum. I would add that this is good advice that I can see other messages on the queries for the XW8400 so you guided me to the right place.

  Thank you for your help in stopping swim autour in darkness.

  Keep up the good work as I am new here and already impressed by volunteers that take an interest in other situations (which need a solution!...) I never see a 'problem' just need to know how / if you can FIX IT)

  Once again my thanks

  Concerning

  Damianscorpio

• HP Elitebook 8560p: Windows 10: Elitebook 8560p; WiFi button is not working, Wifi - and internal 3G modem does not work

  Mobile: HP Elitebook 8560p
  Bios: 68SCF worm. F.6.1
  Modem: AGERA Systems HDA Modem
  HP hs2340 HSPA + Mobile
  Network: Intel (R) (R) Centrino Advanced - N 6205
  Intel (R) 82579LM Gigabit Network Connection

  OS: Windows 10.0 (build 10240)

  I've updated HP Elitebook 8560p of Windows7 (64-bit) for Windows 10. The upgrade process was successful. Later, I noticed, Wifi and 3 G-internal modem does not work. Sametime, I noticed, that old HP Connection Manager has been uninstalled (or lost?).

  The problem is basically this: Wifi - and connections 3G internal modem does not work. I noticed, that wifi-button has "orange" color and the button does not work? I can't change the Wifi status parameters at the level of the OS of Off to On. That's why assume that the wifi module is on "off"-"State. I found the driver SP7107 (driver Wifi for Windows 10 button) package and I tried to install it. The installion failed because InstallDriver_64, location failed. (In Finnish language. Toiminto InstallDriver_64, may c:\...\WirelessbuttonDriver.inf' / installdrv/force). Is there an instruction manual to install the driver?

  I'm very confused and I don't know really, what is the first cause of the wifi - 3 g-modem internal questions and. I guess, this wifi button is not about root work.

  Can someone clarify why there are not more HP Connection Manager on Windows 10 and I tried to install, but install cancelled due to bad BONES. How can I manage wifi - and States of modem 3g without it?

  If anyone can help?

  A big thank you!

  Sip2sip

  Uninstall the access key and button wireless driver

  Reset

  Open Device Manager, run the dirver update

  shouldn't this go

  Download Connection Manager

  FTP://ftp.HP.com/pub/SoftPaq/sp66001-66500/sp66235.exe

  Install the program in Compatibility Mode in Windows 7

• How Microsoft Works faster?

  I don't have a windows 7 for the time so using 'microsoft works '.  It is very slow to load and takes forever to print.  Can anyone help please?

  I been using MS Works since 1989 and can tell you there's usually nothing slow about the work, so I think there must be a problem on your computer.  Have you checked against viruses and malware?  I start in Safe Mode and do it.  When you first power up press F8 once per second, and then select Safe Mode when you get the Advanced Boot Menu.
   
  I hope this helps.  Good luck.

• Windows Update not available on my xp home edition. Also no pgedit and bits do not work.

  "windows update is not available" for my xp Home Edition.  I followed the instructions to fix and found that I had no gpedit.  Also said something about BITS works do not.  I don't have my recovery disks.  I care not one of my files.  I want just a fresh install of xp.  I tried microsoft fix it but no good.  I tried to change the recommended registry but nothing.  I need to have regular updates for my xp system.

  [1] I got a really nice, totally authentic Dell with XP home Edition with product information and all that.  My problem is that he had suffered some nasty virus that makes it unusable or at least the inheritee.

  [2] the recovery discs can be acquired from the source, i.e. of Dell

  A1. You should have to do a clean install when you inherited the computer. Since you have not, it's yet another reason to do it now.

  A2. If a set of disks came with the computer, there is a hidden partition restore (not to be confused with the restoration of the system) you would use to do a clean install (in Dell-speak, a "destructive recovery"). You will find information about this in the Dell Support Web site (e.g., http://support.dell.com/support/topics/global.aspx/support/dsn/en/document?c=us&l=en&s=dhs&docid=181316).

  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• Shortcut to disable TouchPad no longer works

  Hello

  The SSD in my laptop (HP Pavilion dv7t - 6 c 00 CTO Quad Edition) just died, so I'm a new 120 GB SSD and installed a non - OEM version of Windows 7 Home Premium 64-bit (this is because my SSD is apparently not enough great for recovery disk HP sent me - long story). These days I have been installed all necessary drivers, and just about everything works as he did weeks ago. However, there is a problem: my TouchPad is no longer can be disabled by double-clicking in the upper left corner.

  I've tried three different Synaptics TouchPad drivers. Those found on the HP (v. 15.3.11.0) website, one that I get when I click on "update driver software" in Manager devices (v. 15.3.29.0), and those found on the own website of the Synaptics (v. 17.0.19). I checked "Properties of the TouchPad" for each of them, and they have not been of any help. For my current driver, however, when I click on 'settings' under 'Tapping', there is an area called 'TouchPad disable Zone settings,' which has a check box that says: "Double Tap to activate or disable the TouchPad. However, the entire area is grayed out and I can't check or uncheck the box (though, for what it's worth, it is active). I canmanually disable tab in "Mouse properties" "parameters of the TouchPad", but I'd rather just get the feature shortcut.

  Any ideas?

  Hey BHK6,

  I guess when I tried first out different drivers, has not completely uninstall and delete the 'old' before I switched to the news. After clearing all the other versions and installation of v. 15.3.29.0, finally it worked!

  Thanks for your help.

• Video error for a single show - "video error: the files needed to display video are not installed or not working not properly.

  I get a "video error: files needed to display video are not installed or not working not properly."  Please restart Media Center and / or restart the computer. »

  Windows XP MCE 2005 on a PC HP Media Center m750n with 2 GB of RAM, Intel Pentium D 920 processor and more than 230 GB of free hard disk space.

  The strange thing is, it only happens for a show, "Star Trek: The Next Generation" at 07:00 on channel 55 Houston.  Sometimes it is live or recorded.  Shown immediately before and immediately after about 55 works fine, as does anything on any other channel. (Although if I leave the video error for more than a few seconds, then I get an error of the tuner on the other channels until I quit Media Center and bring backup.)

  Maybe my computer is a militant fan of Star Wars?

  Windows XP Media Center 2005

  If this only happens in a show on a channel and passes every day but others
  shows on the same channel are watchable/recordable, it is possible that a copy
  never flag is set that is manifested by the video display
  error message.
   
  I would recommend that you post this topic on the forums of http://thegreenbutton.com .
   
  Tuesday, July 27, 2010, 00:54:06 + 0000, Pseudo Witty says:
   
  >
  >
  > I get a "video error: files needed to display video are not installed or not working not properly."  Please restart Media Center and / or restart the computer. »
  >
  > Windows XP MCE 2005 on a PC HP Media Center m750n with 2 GB of RAM, Intel Pentium D Processor 920 and more than 230 GB of free hard disk space.
  >
  > The strange thing is, it only happens for a show, "Star Trek: The Next Generation" at 07:00 on channel 55 Houston.  Sometimes it is live or recorded.  Shown immediately before and immediately after about 55 works fine, as does anything on any other channel. (Although if I leave the video error for more than a few seconds, then I get an error of the tuner on the other channels until I quit Media Center and bring backup.)
  >
  > Maybe my computer is a militant fan of Star Wars?
  >
  > Windows XP Media Center 2005
   

  Barb Bowman

  http://www.digitalmediaphile.com