Access airPort Express and Vista Internet problem

Similar Questions

• Help with Airport Express and Configuration capabilities

  I have a new Airport Express which is set to expand the network wireless (created by Time capsule).  Is it possible to also provide a wired connection to another device in this mode?  If so, how do I need to change the settings? The other device is a hub of lighting (not wireless) which must have an Internet connection to allow remote control of lights.  It is currently connected to the CT but its location does not cover a part of the House, the new AE is the perfect place.

  Is it possible to also provide a wired connection to another device in this mode?

  Yes

  If so, how do I need to change the settings?

  Some settings need to be changed. By default, both the "O" WAN port and port LAN <>- both act as LAN ports. Choose one or both to an active Ethernet connection.

  The other device is a hub of lighting (not wireless) which must have an Internet connection to allow remote control of lights.

  Turning off the hub of lighting, make the Ethernet connection to the AirPort Express and the hub of power upward. You should be in business.

• Extend my cable modem network via Airport express and Time Capsule

  I am trying to expand my home network through my Airport express AND a Time Capsule. Installation of extension through the airport was easy and successful. I then tried to expand further with Time Capsule, but it gives me the opportunity to launch a new network. What do different to fix my Tim Capsule to my global network?

  I then tried to expand further with Time Capsule

  Unfortunately, it is not possible to do what you want... given that the function of "extend a wireless network" Apple will not accept to be extended once the network is not two.

  The other question that you probably, it is that unless your 'main' router is also another router from Apple, the Express is not really 'extension' of the network at all, despite what you think.  More likely, the Express is "membership" in the network. It can be used to connect a USB printer remote in this environment or for use with AirPlay... but the Express doesn't "spread" or "repeat" when he joined the network.

  If you want to check if the Express is really extend the network, and you have a Mac laptop... after back and provide you with a few steps.

  But even if the Express could be the extension of the network... Time Capsule will have to connect to the network using a permanent, wired cables Ethernet... ideally to your main router, but it might work OK if you connect to the Express.

• Airport Extreme and Cox Internet IPv6 problem

  This is one notification to others as well as a question:

  I have Cox Cable high speed Internet in several places using an Airport Extreme 3 GB connected as a router to the modem cable Cox.

  For more than a week, we would find regularly in the morning that the outside connection to internet DNS servers were lost.  We called Cox several times and they have done the usual reset of the router and the modem and things seem to work for some time.  But the next day again.

  They came out and replaced the connections, I I had to buy a new cable modem and I replaced a digital switch.  Every time things seem to work for some time.

  I thought to replace the Airport Extreme (I read others did in a similar situation without result).

  After much frustration, I started looking for Airport Extreme and DNS and found similar stories.

  After that several unproductive calls with Cox Internet of first level support, I finally reached a level which acknowledged that Cox was the IPv6 deployment and he was having a problem with Airport Extreme routers.  They said Apple was working on it and gave me a number to call for support from router from apple.  Unfortunately the number they gave was no longer valid.

  I persisted and finally got the Apple support and indeed they knew the problem and said Cox was working on that... But there was a temporary problem - and that was to disable iPv6 on the airport extreme (more precisely (internet > Internet Options > configure Ipv6: link-Local only).)

  For now it seems to have stopped the decline during the night which seems to happen between 12:00 and 02:00.  By experience, I do not think that its really a problem of compaibility IPV6, but how the router meets some kind of rebate to zero/test signal signal service is done in early morning.

  So the question is - does anyone know with certainty what happens or who really works on this.  From my point of view, both sides think it's the other problem.  BTW - I've read about other people with Non Apple routers running after something similar.

  GABarber,

  I also had a similar problem.  Prior service of Cox Communications in Phoenix AZ has been rescinded and recently restored (March 1) yesterday afternoon.  After the departure of the technician, the wi - fi failed to produce a valid connection, citing DNS error and no response from the server.  We have a new modem, CISCO, at an Air Port/Time Capsule 2 TB ethernet cable.

  After talking with support for level 2 level 1 and then Cox, there was sufficient evidence for a correct signal via the modem, but the Port of the Air was not picking up or he issued (by Cox).  Check my Air Port Utility apps on iMac and iPhone shows a signal Internet or Air Port casual, but never the two together.  The modem and the Air Port so would show appropriate green led lights up, but in vain to work wi - fi.

  The only thing that has worked so far is your solution listed above: Air Port utility > Internet > Internet Options > configure Ipv6: link-Local only.

  Thank you, GABarber.

• Time capsule airport unplug my Airport Express and internet

  Howdy,

  I just brought my Airport Time Capsule of the work. I have the joint via an Ethernet cable to my extreme, both are in my basement. Upstairs, I have a set Express in place to expand the wireless. The extreme and Express worked for many years now.

  Once the time Capsule has been recognized in the public services of the airport, he made an update of the firmware.

  After that, I edited the settings for the time Capsule to my home network and set it to "develop wireless."

  Extreme, Express and Time Capsule all had them green to light up in public services - so I tried to run a Time Machine backup, and things went sour.

  The cable modem the extreme is connected to started to abandon the connection every 30-45 seconds and the Express light went red and there is no longer recognized, so I clicked "forget" to remove it. Time Machine could not locate the time Capsule.

  So I unplugged the Time Capsule, all rebooted and now my extreme and Express up and running again.

  What waste?

  Thank you

  Dan

  After that, I edited the settings for the time Capsule to my home network and set it to "develop wireless."

  I think you probably mean "extend a wireless network".

  This is the bad setting... because it would be used only if the time Capsule connected to your network using Wireless.  You specify the Time Capsule connects using Ethernet.

  Here is what is happening now... the time Capsule waiting for a wireless connection, but he gets an Ethernet connection.  This translates into a huge feedback loop that effectively blocks your network.

  The correct setting for the time Capsule would be "create a wireless network"using the same exact wireless network name, security and password as other Apple routers. " Finally, make sure that the time Capsule is set to run in Bridge Mode before you click Update to save the new settings.

• Setting up Airport Express to provide internet to existing network

  Hello

  I want to install the following configuration:

  Router (ISP) < connection cable > Airport Express < Wifi > router primary < cable connection > Network Attached Storage / TV / Playstation

  Is it possible to provide the internet connection to the main router via the express from the airport, that is connected to the Wan? Or the Airport express to be the main router, to use the WAN connection, it connected?

  Hope you find what I want to do ;-)

  Concerning

  Michael

  This configuration will not work... unless the main router is a sort of apple airport. Is it?

  It is a very poor installation, even if you have as a main router apple airport... It's much better to the cable. I'm guessing that's not possible... If not then you another possible way around the problem is adapters EOP (ethernet over power).

  They do not go to work in all situations depending on the power of its wiring in the House... but are better than wireless links when they do.

  You show a (ISP) router to the starting point... what router is it? If that works as a router... None of the other devices must be configured as router... have a primary router means that you have no router in front of her.

  Give us details and we can help you further.

• Setup Airport Express to Vista error "the system administrator has made policy that prevents this facility."

  I try to install AirPort Express (5.5.1.17) laptop, Vista (ver 6.0 SP 2) but the software refused to install because "the system administrator has made policy that prevents this facility." However, I am the only user of that pc and logged as administrator and there is no multiple user accounts. How can I continue the installation process?

  Problem is solved. The solution was to make the disabled user account control.

• Loss intermittent connectivity... Airport express router or modem problem?

  Airport express intermittent loss of connectivity?

  Not much information to go here.

  Please provide at least the following details:

  • What exact model of the AirPort Express model do you have?
  • What is an intermittent loss of connectivity? The Express, iPhone, another thing?
  • This working before and just started happening OR if this has always been a problem?
  • Did you do the upgrades of firmware or software recently, when this started to happen?
  • What have you tried so far, to solve this problem?

• 970cse with airport express and USB printing

  I have a hp 970cse on the network via a USB cable and the Airport express. Router is AirPort Extreme. iMac (OSX 10.9.2) sees and prints well wireless. iPad (IOS 7.1) is on the network, but can't find the printer. Prints from the possible ipad using this config? Thx for any help

  Hello Darwinband welcome to the Forums of HP.

  I see you are having problems printing from your iPad.  This printer doesn't support ePrinting or Airprinting, this printer is not compatible with an iPad. For more information, please consult this document on HP Web-Connected printers and support of the Services of Cloud.

  Please let me know if you have any other questions and I thank you for display on the HP Forums.

• How can I make it work with just an Apple TV, AirPort Express and iPod/iPad/iPhone?

  Hello people of Apple, I have some questions about a new "setup" of Apple products that I hope I can get to work between them. In other words, I need to know if what I am wanting to do in fact is possible with this new configuration.

  Current set up:

  • mini iMac (a former member of 2010, but fully updated for OSX El Capitan)
  • drive external HARD as the Time Capsule disk and with tons of music not purchased through the iTunes store (from my CD collection)
  • Old Airport Express connected to the modem (which received the fiber of my ISP)
  • 3rd Gen iPad
  • iPhone 6 more (work phone)
  • iPod Classic 5th Gen with close to 30 GB of my library and plugged on my car stereo to
  • iPod Shuffle 4th Gen for gym

  I want my setup to be:

  • Apple TV
  • Airport Extreme with external HARD disk * even from above * (my library backup iTunes music around, videos and photos) connected via USB
  • iPad Pro
  • iPhone 6 Plus
  • iPod Classic 5th Gen that I want to stay plugged into my car stereo to
  • iPod Shuffle 4th Gen for gym

  So my questions are: can I continue to sync my iPod Classic and my iPod Shuffle without a computer (I guess maybe not), and if so, HOW? I'll be able to sync the iPad and iPhone via wifi without computer as well? Also, I'll be able to play my library directly from the drive external HARD using the Apple TV?

  I'm guessing / hoping that the new Apple TV from the music/iTunes app and the pictures/iPhoto app, I can connect my iPod to the airport and synchronize them via the app AND connect Apple TV directly on the HARD disk via the airport. And perhaps also to synchronize the iPad and the iPhone on wifi in all Apple TV apps or something or maybe I just need any Uploader in iCloud and will not even need the HARD drive more except as a backup. Help!

  You have need of computer-Mac or PC. You can sync the iPhone/iPad wireless, but only via a computer in iTunes, I'm not sure about the capacity of wifi iPod.  Not to mention the iTunes, the software is required to manage the devices and media.  Important note: you must always back up your purchases - just because you buy a book, movie, TV show, song today does not necessarily mean that the media will be available from Apple servers for eternity.  The Studios retain rights and may, at any time, sign an exclusive agreement with a network, streaming provider etc which would then remove this file to be available on Apple servers.  You must download and save purchases - that would need a computer running iTunes software. You could buy storage for all your media, but then additional personal iCloud yet you would need a computer to manage. In addition, with respect to the Apple TV, you cannot connect all readers.  The USB port is only for the restaurant and full-service.  The Apple TV is a streaming device, but for the local media, he uses homeshare, which requires a computer iTunes rather than be connected directly to a storage device.  Although there are other applications like plex or infusion but they would require a NAS configuration rather than the HARD disk, and you would want / need a computer to manage the NAS server...

  the only thing you want to eliminate is the only thing that is required for all...

• no more WiFi which extends from the airport express and Time capsule

  I have no more WiFi which extends from the express airport and Time capsule.

  and once it worked...

  airportconfiguration-app also works, but the graphic display allows to have a straight white line. now, it's one interrupted...

  Your unbroken lines in airport show connections ethernet utility... broken lines show the wireless connections.

  So it depends on the extend method you used.

  I think at this moment, things are configured wrongly... for some strange reason things happens and elements on a stand-alone basis, return to a default mode.

  The best way to manage it is full factory reset on everything... and repeat the installation.

  I have no more WiFi which extends from the express airport and Time capsule.

  It seems to me that you extend a NON-APPLE router... in this case, your Apple routers must connect by ethernet and create a wireless network. Routers Apple cannot extend the NON-APPLE router wired.

  The express could extend the TC or visa versa... by wireless...

  Then I suggest say us what is the main router in the network?

  You have connected by ethernet to the TC or Express or both?

  If so please reset completely the two elements and try again. Make sure they are in bridge mode... It's the network tab. Router Mode is turned off.

  

  And your wireless tab is configured to create a wireless network...

  Use the same name (SSID) and even the security setting and the password as the main router to network roaming (extend wireless ethernet).

  If the Express and transport CANADA are the same, both will have this configuration... If the express extends to wireless then it should NOT be connected to all the way to ethernet... (sequel to wan side at least) and it will be set to expand wireless on the wireless tab.

• Portege R500: Fingerprint Software and VIsta SP1 problems

  I encounter another problem which seems to be related to the fingerprint software. If I install the software, no issue arises. Once I register the fingerprints, the system slows down. Same clang of the other computers in the domain, in that I am, the response slows down gradually and then fails several times, before becoming inaccessible.

  Then as Exlopre crashes after a while. If I can stop the command, it hangs at the screen bright blue vista saying "logout". Then, the only way to turn off the computer is by holding down the power button.

  I log back in again once, unregister the fingerprint and all works well.
  Any idea? Thank you

  P.S. The software and drivers Vista SP1 and Toshiba are fully patched/updated

  Hello

  I am interested in your question, you are connected to a domain and use the fingerprint software in the network?

  Well, how it works in the Working Group?
  Have you noticed the same slowdowns system using laptop computer not connected to the network?

  Please check this because I guess that there is local connection between domain parameters (server) and your stored settings on the R500.

• Satellite X 200-252 and Vista mixer problem

  Hello

  My Satellite X 200-252 runs under Vista Home Premium operating system.

  I have a strange problem with sound engineer. After (I think) some security patches applied my vista has ceased to recognize the audio device.
  The icon in the task bar on the right side of the screen is marked with the Red Cross and all IM by clicking on the icon of the information window indicates that there is no audio device.
  When I select Properties, I see all 3, i.e. internal speakers, hdmi output devices and digital output. However, no icon appears in the window. But the configuration does not work.

  In addition, keyboard shortcuts and the touchpad works as expected. I mean I can disable/enable sound etc...

  But I can't change the volume by channel. For this I need the application of mixer.

  What can I do to repair my computer?

  / Arek

  Hello

  In your case, I recommend reinstalling the audio driver.
  As far as I know this laptop supports a Realtek sound card.

  You can visit the Web to Realtek website and may download audio driver directly from this page.
  You need a HD audio driver.

  Welcome them

• Sever 2003 domain and vista business problems...

  Hello, I have a Win 2003 server (64-bit) and the server running exchange. also set up as a domain server. (used these directions, http://www.windowsreference.com/dns/step-by-step-guide-for-windows-server-2003-domain-controller-and-dns-server-setup/) now, when I put the news of field in vista Enterprise computer to connect, it can't find it. It is a small network all connected by a wired router.  what I am doing wrong and if this is not the right place, please tell me where to go. Thank you

  Hello

  Your question of Windows is more complex than what is generally answered in the Microsoft Answers forums. It is better suited for the public on the TechNet site. Please post your question in the below link:

  http://social.technet.Microsoft.com/forums/en-us/category/WindowsServer

• Yesterday my AirPort express (2nd generation) wanted to update to be r 7.6.7. After that the speed of the aircraft fell sharply. Everyone has experienced similar behavior? Tips to solve the problem are welcome.

  Yesterday my Airport Express wanted to updated, I did. (from 7.4.6 to 7.6.7).

  After that, he started to behave erratically with big drops in speed. Anyone have similar experiences? How can I fix this without having to buy a new one.

  Stop your Mac. Turn off your Airport Express and stop the modem from your ISP. Wait 10 minutes, then turn on the modem to ISP, and then the Airport Express base station. Power on your Mac. Re-evaluate your performance problems.

  Run thisor that in this preference order to assess your latency time, download and bandwidth. You may need to modify the server or the other.

  I have upgrade 7.6.7 on my 4th gen Airport Extreme and observed no performance degradation to before the update.

  Sometimes the ISP gets their DNS in a tangle and makes the network almost Catatonic until they have to fix things. Nothing to do in this case at the user level. Did you call your ISP and asked them to check their equipment on your premises?