Access denied, connect with permissions of Directors, and then try again

Similar Questions

• Impossible to install the bluetooth driver in XP Mode, error "this software cannot be installed remotely. Please connect to the local computer, and then try again.

  I have win 7 pro as my OS, whenever I try to install the bluetooth driver in xp mode, I get an error message saying "this software cannot be installed remotely. Please connect to the local computer, and then try again.

  Check this box:

  http://support.Microsoft.com/kb/2438651/en-us

• BlackBerry smartphones "Blackberry App World is had problems to connect to the server Blackberry App World. "Check your network connections, and then try again.

  Whenever I try to access an application, appworld is a site of the company that send me to appworld I get this error.
  "Blackberry App World is had problems connecting to the server Blackberry App World. "Check your network connections, and then try again.

  I have loaded the bb appworld re have the latest version for my new bb bold 9900, but still the error and then lock up. Power off, and get a message that I had an unknown error.

  People have had this problem since 2010. I never had this problem with my flashlight or my 9000 "BOLD".
  Anyone know what is happening? I also have the latest OS on my 9900.

  Found a solution! Laughing out loud! How delayed. I changed my email in bb code. For example, after changing from one gmail to another account, I changed it back and baaammmm! Problem solved, but do not know why it should be a problem in the first place right?

  Good luck to you guys who do not have the possibility of returning to another email.

• Encarta Dictionary works do not mistake: this service could not be searched because you are not connected to the Internet. Connect, and then try again

  Original title: Encarta Dictionary (not searched)

  Encarta dictionary does not. I get the message "this service could not be searched because you are not connected to the Internet.  Connect, and then try again. "However, I am connected to the Internet.

  Hello

  1. don't you make changes to the computer until the problem occurred?

  I suggest you try the steps mentioned below and check if it helps.

  Method 1: Try to start your system in safe mode with network and check if the same problem occurs.

  http://Windows.Microsoft.com/en-us/Windows-Vista/advanced-startup-options-including-safe-mode

  Method 2: If the question does not exist in Mode safe mode then try to put your computer in a clean boot state.

  By setting your boot system minimum state helps determine if third-party applications or startup items are causing the problem.

   

  How to troubleshoot a problem by performing a clean boot in Windows Vista or Windows 7:
  http://support.Microsoft.com/kb/929135

  Note: After the boot minimum troubleshooting step, follow step 7 in the link provided to return the computer to a Normal startup mode.

  Hope this information is useful.

• Windows update error: your PC is not connected to the internet. connect to the internet, and then try again

  Original title:

  Windows Update

  Hello

  When I open the store windows I get an error saying

  your PC is not connected to the internet. connect to the internet, and then try again

  is there an internet setting before the update of win8 or one of the applications

  Thank you

  How to solve the problems of connection with Windows Update
  http://Windows.Microsoft.com/en-us/Windows-8/how-solve-connection-problems-Windows-Update

  How to troubleshoot problems connecting to Windows Update or Microsoft Update
  http://Support2.Microsoft.com/kb/818018/en-AU

• Download error! Impossible to reach on the adobe servers. Check your internet connection, firewall settings, and then try again

  Hi all

  Before writing this, I took the time to research online, but no luck.

  I decided to buy the photographers CC package. downloaded the installer and moved forward with the installation, allowing to connect my Adobe ID and got the error:

  "Download error! Impossible to reach on the adobe servers. Check your internet connection, firewall settings, and then try again. »

  
  

  I don't use any antivirus or firewall, and there is no redirection port to my internet connection.

  
  

  The software has been installed in a Mac Pro 2012, running the Mavericks 10.9.5. I completely uninstalled Installer used a CC cleaner App. Also went under the ~/Library/Application Support and ~/Library/Preferences moved these .plists for another clean installation but without success.

  
  

  Any help will be greatly appreciated.
  

  Thanks in advance for your help.

  
  
  

  Hello Mohit,

  Thanks for the link, but it was driving me nuts and takes me too long to understand. So, I saved all my work and formatted my hard drive with a new installation of Mac OS x.

  That solved the problem.

  Thank you all for your comments!

  Pedro

• Error when opening file reader pen "the driver or network connection that the shortcut 'Target.lnk' refers to is unavailable. Make sure the disk is properly inserted or the network is available, and then try again. »

  Original title: during opening of pen drive file to msg "the drive or network that all connection 'refers to mpr shortcut' folders.lnk all in unavailable.make that the disk is properly inserted or the network is available and then try again."

  OS:-xp sp2

  pen drive :-transcend

  earlier, my USB had worms, bt Finally I took it off my ESET internet security (fully updated).

  BT still records are transformed into shortcut of 1 kb. and makes me worried coz I m nt able to open these files... Please help me out of this problem... I need my data, its urgent.help me as soon as possible to change these documents in their original format.

  my folders have files .doc, some do' report.unfortunately not have a backup of these files.

  target location: Z3ojKiH9lvFefkO0mG6Hl1XplgLV3L0YJVfdZRr3dtLhEN80DnzEPQX8Y2sziakx2axTnS4SA0447SPkbMn4QN

  In the location target properties are even 4 all records

  Clinical target:-H:\Z3ojKiH9lvFefkO0mG6Hl1XplgLV3L0YJVfdZRr3dtLhEN80DnzEPQX8Y2sziakx2axTnS4SA0447SPkbMn4QN\73mrVQz9rDByh9hfKJ9v0lt5z3m0s5hP0l.exe real sheet.xls

  What exactly is...

  I ve deleted the worms... checked by ESET, CLAMWIN PORTABLE, lapi ny window 7 WINDOW DEFENDER friend.

  ESET that worms have been Win32/AutoRun.VB.UG.Worm.

  now, I ve you gave details d, should know the problem I ve.i believe.help me

  Thank you for your time, but I did nt get the solution everywhere so formatted, it

• I'm not able to install illustrator creative cloud CC. This is the error when I download creative cloud app. "Cannot write the registry value. "Verify permissions, and then try again.

  I'm not able to install illustrator creative cloud CC. This is the error when I download creative cloud app. "Cannot write the registry value. "Verify permissions, and then try again.

  No one can tell you anything without the info adequate system or other technical details, including the exact error message.

  Mylenium

• When I try to use the updated creative cloud up the file runs and then informs me that "Please connect to the internet, and then try again." But I'm obviously connected.

  When I try to use the updated creative cloud up the file runs and then informs me that "Please connect to the internet, and then try again." But I'm obviously connected.

  

  Hi Colin,

  Please try to reinstall the creative cloud after disabling antivirus and firewall.

  Reference: error download or update Adobe Creative Cloud applications

  Concerning

  Megha Rawat

• "The drive where windows is installed is locked. Unlock the drive, and then try again. »

  Have a laptop Envy M6-K010DX. Due to a problem of the internet while improving to win 8 to 8.1, the PC does not start correctly, and Windows Explorer will not load. Has decided to "Refresh" of the operating system and is gone to F11 restore utilities. When I go to the utility of refreshment and follow the prompts that I reach a message that says, 'the drive where windows is installed is locked. Unlock the drive, and then try again. "I was looking for support for the unlocking instructions and apart from some commands bootrec (which did not work - probably because I don't have a Win 8 disc) not much is available.

  The only access I have for execution of orders made by the tasks Manager command-line and F11. What is this 'locked' drive, anyway? Someone at - it any information on that?

  Hello Lara.

  IF you have updated from 8 to 8.1 and the process was interrupted during installation, this may damage the disc and therefore locked error. "Refreshing" the system would not be the answer that you need to clean install Windows 8 again. 8.1 update can break the bond of the recovery partition, especially if it has become corrupted as indicated.

  You must clean up the installation with the recovery discs, you must have created before you updated to 8.1.

  In addition, if you do not have the recovery disks, you can buy a set of HP or install a regular copy of Windows 8 and then update the drivers manually. HP has the Windows key now integrated into the bios.

  This forum is used on a voluntary basis and is not maintained by the HP Support for substitution of contact.

  Your message looks like not it was even 24 hours old before you decided to delete it from the original computer?

  I'm sorry to hear you had to do this.

  If you need to HP support, you must contact them directly to your country or region.

  Contact HP-Assist phone USA | HP® official site

  Contact HP worldwide | HP® official site

  Good luck with the new computer.

  Any brand or model you purchased now, don't forget to create the recovery disks/drive.

• Error: Windows cannot find "C:\Program Files\Common Files\LogiShrd\CDDRV3\LDConfig.exe." Make sure that you type the name correctly, and then try again at the start of Windows 7.

  Original title: Windows cannot find "C:\Program Files\Common Files\LogiShrd\CDDRV3\LDConfig.exe." Make sure that you type the name correctly, and then try again.

  This error keeps showing up in when I connect to my pc. How am I able to fix this? It's really annoying. Please help me.

  Its a file/utility Logitech and nothing to do with the victory

• When you try to set up my Tv Tuner in Windows Media Center, I get this error message: "TV Setup has encountered a serious problem. Click Finish to exit, and then try again. If this problem persists, restart Windows Media Center or the computer. »

  I have a HP m8034n pc with a tuner Hauppauge WinTV HVR-1600 NTSC/ATSC Combo.  The pc came with Vista and Windows media center worked great just with the tv tuner.  I upgraded to Windows 7, December 2 and fail to put in place my tv with WMC tuner.  The recorded shows that I had before the upgrade to Windows 7 appear and play without problem in WMC. I used the hardware diagnostic tool that is installed on my pc to control the Tuner, and during the test, I can see fine TV stations.  This unit is compatible according to microsoft Windows 7. I have the latest driver and tried to uninstall and reinstall. I ran Windows Update and everything is up-to-date. After that WMC checks tuners, it says:

  screen A___
  WMC has discovered the following:
  Analog cable (1 Tuner)

  Other tuners or TV signals were detected but will not be configured.
  (Show details)

  Is this Setup correct and complete?
  o Yes, configure TV with these results
  o no, show more options
  ________________
  When I click on show details, it is said:

  screen B___
  No TV Signal
  If a TV signal should be present, check your signal for following tuners connections and try again:
  Hauppauge WinTV 418 BDA Tuner
  ________________
  There is another question, because he does not list my correct tv tuner. I click, so I'm now on A screen again.

  When I click Yes, set up TV with these results,-(for the analog option Cable(1 tuner), I select my cable service is, and then click Next.) It then displays a confirmation of analog cable and my cable provider, I click Next again and the error message "installation TV met with a serious problem. Click Finish to exit, and then try again. If this problem persists, restart Windows Media Center or the computer. "appears.

  I even tried to set up the signal manually and on the confirmation screen, I click Next, and get the exact same error.

  I would really appreciate any help and if more details are required, please let me know.  Thank you!

  -Doug

  I don't know what happened, I left my PC off overnight and planned reformatting today. But I decided to give him another chance. Instead of saying the tuner was not available. He showed me a static snow image strong, as he was trying to use my Analogue tuner. In fact, it is supposed to use the composite input for my cable box. I re set my TV signals, and now everything works well again. Its strange because I reboot half a dozen times last night and it's never worked. Leaving the PC turned off for the night must have done the trick, I guess.

• "Impossible to reach on the Adobe servers. Check your firewall settings, and then try again in a few minutes. »

  I just bought the 1 year paid in advance with all Adobe Adobe Creative Cloud applications. But when I downloaded it, it said "unable to reach the Adobe servers. Check your firewall settings, and then try again in a few minutes. "I'm on a connection high speed of my PC directly on my Modem. But it worked when I tried on a laptop computer connected to the router.

  I have already added exceptions for all adobe in my Windows Firewall and Norton firewall. I tried to uninstall and remove all adobe, but no luck :/

  Any suggestion would be great.

  I did some more research and found out it had to do with my hosts file, it was blocking adobe breaks. So it's fixed! Thanks for the quick response even when

• Will not install driver installer of EPSON Scan (L210) - ' error occurred when installing re start the computer, and then try again.

  Original title: problem installing scanner

  EPSON Scan (L210) setup driver moved - "is an error occurred when installing re start the computer, and then try again.

  Hey there, MAHIPALSINGH143

  Welcome to the Microsoft community forums.

  So that the community help to install your printer, we will need more information. Please answer these questions:

  1. Windows what operating system are you running (Windows 10, 8.1, 7)?
  2. The troubleshooting steps have so you far?
  3. Did you upgrade to a new operating system?
     1. If Yes, what operating system you were on before?

  When you look at the error message, it doesn't look like you need to update your drivers. You will need to go on the official website of manufacturers, with your EPSON.

  Here is the site for the EPSON drivers: http://www.epson.co.uk/gb/en/viewcon/corporatesite/support

  When I entered your model of "Epson Scan (L210)" number, it does not recognize the product. Would you be able to check and make sure that you have provided the correct model number? Your model is a new printer?

  Kind regards

• When I try to send a picture through Windows Live Mail I get an error message telling me to delete the picture, and then try again.

  When I try to send a picture through Windows Live Mail I get an error message telling me to delete the picture, and then try again.

  original title: RECEIVES the MESSAGE of ERROR WHILE SENDING AND RECEIVING PHOTOS

  Hello Jane,.

  The best place to ask your question of Windows Live is inside Windows Live help forums. Experts specialize in all things, Windows Live, and would be delighted to help you with your questions. Please choose a product below to be redirected to the appropriate community:

   

  Windows Live Mail

  Windows Live Hotmail

  Windows Live Messenger

   

  Looking for a different product to Windows Live? Visit the home page Windows Live Help for the complete list of Windows Live forums to www.windowslivehelp.com.