Similar Questions

• Drive access denied when opening PDF files

  I noticed this on adobe Reader Versions XI and DC. What happens is whenever someone tries to open a pdf file that has name of file path is greater than 217 characters they will receive the error 'Access denied.' rename the file or move it to a path that has character < = 216 characters users can then open. If you try to save to the location it will appear to have saved, will throw any errors, does not save everything simply.

  I upgraded the drive to the new generation of DC. Tested on a new installation of Windows 8.1, I had at my disposal and tested it on all computers 15ish which give the same result. With different PDF documents are both on the internet and made by me using
  Acrobat.

  A few notes.

  This only happens on the network drives.

  I have access to all the locations of readers, that I tested.

  I had another user test this thus giving the same results.

  If I add my UNC path name of the file instead of drive letters, the amount is greater than 254.

  For example, if the path of the file is H:\My network Drive\Somearbitraryfolders\filename_Greaterthan217.pdf Its always less than the 254 that windows gives to us, but if I add my \\domain\public\drivename\Somearbitraryfolders\filename_Greaterthan217.pdf UNC path so this eqauls more than 254.

  So even if I can move files to this location by going through drive letters, stick them in, all that Jazz. As the reader is concerned it is the limit of windows, and may not be able to do something with it.

  If the Player looks at the UNC path instead of drive letters?

  If so is there a way for him to watch the drive letters?

  A quick edit. I just found this

  Known issues | Acrobat DC, CD player

  Problem: error access denied when you try to open the PDF file of the symlink via UNC path [3844582]

  So, I'm going to assume that the answer to my question is no. All that I can do is hope for a update or tell my users not to do ridiculously long paths.

• Photoshop cs4 access denied when you try to install from disk in Windows 7 64 bit.

  Photoshop cs4 access denied when you try to install from disk in Windows 7 64 bit. I tried in

  safe mode and it starts to install, but get an error there as well.

  What should I do?

  So when you put the disk in it does not work properly? When the disc is inserted, you should have a window pop up with 2 options. 1. install and another to see what is on the disk. Choose to open the disc or explore. Navigate to the folder where is the photoshop CS4 .exe file (which runs the Setup program), right-click on the .exe file and choose Run as administrator and it should start. See if it will install. If this isn't the case, then read below.

  I don't know how long you got in the installation until so chances are, you will need to run the CS4 Cleanup utility. 2 levels to run but do not use 1 or 2 just type number 3.

  http://www.Adobe.com/support/contact/cs4clean.html

  You may need to run the utility windows install cleanup too

  http://support.Microsoft.com/kb/290301

  Before you try to reinstall the software make sure that adobe reader is not installed. If it is delete. It has caused problems in the past with vista and CS4 installs.

  You can also disable windows Defender and all antivirus software. You can keep UAC Windows 7.

  When installing CS4 to 90 percent, it stops almost and may take 5 to 10 minutes at the end. It's normal. What a pain huh...

  After the installation is complete, restart

  After restarting, go to the icon of CS4 64-bit or 32-bit (depends on 32-bit or 64-bit Windows 7) in the starting area, right-click on CS4 64-bit (if you have windows 7 64 bit), and then choose Properties, Compatibility tab, and then check run as administrator at the lower part. Hit apply, ok to finish.

  Now, run CS4 and run the update.

• I have 5 "MY BACKUP" folder on my drive C in 2008. How can I remove the old ones. Receiver error MSG "Access denied" when you try.

  I have 5 "MY BACKUP" folder on my drive C in 2008. How can I remove the old ones. Receiver error MSG "Access denied" when you try.

  Hi PJG_918,
   
  To resolve this problem, you must turn off Simple file sharing and then take over the folder.
   
  Here is an article that will explain the procedure to the same thing:
   
  "Access denied" error message when you try to open a folder

• I get "access denied" when you try to add the component 4543BD

  I get "access denied" when you try to add the 4543BD to my diagram. This component has been added since a previous version. I use Multisim version 12.0.0 student edition.

  Hi Diarra,

  I checked my database and the 4543 isn't in the student edition. If you open a drawing that was created in a version more recent as the education edition and copied the part to your database, when you place this part, you will get the access denied message.

  Attached is a diagram with the part, you can open it and build you circuit around it.

• How can you stopPhotoshop CC2015 access denied when you try to scan photos?

  How to stop Photoshop CC2015 of access denied when you try to scan photos? I had to resort to the application of the C6. Was able to use the CC2015 until tonight.

  Have you tried restarting your scanner and restarting your PC?

• "Access denied" when you try to open a session

  I get the message "Access denied" when I try to log into Windows, I have not changed my passwords or anything I know. The last time I was on the PC, it was working fine, the next time I logged in that it gave me this message.

  Hello

  Do you have any other user account on the computer?

  Try the following steps:

  Step 1: Check if you can connect to Windows in safe mode.

  See this link for more information on how to start in safe mode:
  http://Windows.Microsoft.com/en-us/Windows-Vista/start-your-computer-in-safe-mode

  If you can connect to your account in safe mode, and then perform a system restore.

  Step 2: restore your computer to an earlier point in time in safe mode.

  Check out these links for help:
  http://Windows.Microsoft.com/en-us/Windows-Vista/restore-system-files-and-settings  
  http://Windows.Microsoft.com/en-us/Windows-Vista/system-restore-frequently-asked-questions

  Kind regards
  Afzal Taher-Microsoft Support.
  Visit our Microsoft answers feedback Forum and let us know what you think.

• "Access denied" when you try to delete some adware

  Original title: adware on my laptop

  I have

  I'm "Access is denied" when you try to delete some advertising software which has been downloaded to my laptop somehow. I tried to delete these files using my add/REMOVE icon, as well as through my C drive, listing files, and the attempt to delete in this way.

  I'm still on Windows XP (no longer supported), and I try to save files, etc to my new Windows 8.1 but worry about the adware transferred as well.

  The files are:

  libeay32.dll

  cyycfhtzro32.exe

  Files B021CBBD-E38E-4F8C-8E93-6624B0597A23

  ssleay32

  etmajyzoqm.exe

  etc.

  Any help you can give me to get rid of this ad-ware/malware, will be greatly appreciated.

  Steven

  Delete Adware & puppies with these tools. Check the updates first and then analyze with each of them at a time until your machine is clean.
   
  
  AdwCleaner (free)
  http://www.bleepingcomputer.com/download/adwcleaner/
   
  
  Malwarebytes (download the free version)
  https://www.Malwarebytes.org/free/
   
   
  
  HitmanPro (30 days free trial)
  http://www.SurfRight.nl/en/hitmanpro
   
  
  Junkware Removal Tool (free)
  http://www.bleepingcomputer.com/download/junkware-removal-tool/
   
  
  If necessary, reset your browsers. For IE:
  http://Windows.Microsoft.com/en-us/Windows7/reset-Internet-Explorer-settings
   
  
  Some reading:
   
  
  On these toolbars and modules - potentially unwanted programs (PUP)
  http://www.bleepingcomputer.com/forums/t/407147/answers-to-common-security-questions-best-practices/?p=3187642
   
  
   

• Access denied when you try to edit BOOT. INI.

  I was using Norton Ghost to clone a drive for one of my clients.  The clone has failed for some reason any.  After powered my system down to remove the two discs I was working with my system turns on no longer.  I get the NTOSKRNL. EXE missing error.  I decided to take my hard drive to another computer to check the boot.ini file.  The other system is Windows 7.  I get ACCESS DENIED when I United Arab Emirates, the attrib command to reset the attributes S & H.  I have to take ownership of the file.  Can someone help me?

  Why don't put you your XP drive afflicted and fix it using the XP Recovery Console?

  The situation is usually very simple to solve without moving from your HARD drive to another computer - and how you can fix this if you didn't have another computer to move to-reinstall XP from scratch or 'try' a repair installation?   If you had any XP installation CD?  (The Uuless Ghost FUBAR had somehow your Windows installation)

  You don't have a Recovery Console CD?  Make one following the instructions on this link:

  http://www.bleepingcomputer.com/forums/topic276527.html

  If the NTOSKRNL. EXE is really missing, or even suspect, that's just replace it by using the Recovery Console.  It is in many other places on your HARD drive - just copy in a replacement and be on your way.

  If you have doubts about your boot.ini, just rename or delete (rename boot.ini.bak boot.ini).  XP doesn't have a boot.ini file to start in a general single partition configuration.  It will complain, but still boot without one if all the other pieces are in place.  Your question of the NTOSKRNL. EXE missing error is unlikely to have anything to do with the boot.ini anyway, but you can try things if you wish.

  If you want to take the right of a folder/file on a drive that has been moved to another computer, to implement this article:

  http://support.Microsoft.com/kb/308421

  I know not if attrib works the same in Windows 7, but XP, you type a command as the start, run or from a command prompt:

  attrib - shr c:\boot.ini

  It would be 'less' (remove) the attributes system, hidden and read-only.

  Here's a boot.ini file General who can help as an example, or after the content of yours, and we can take a look.

  [boot loader]

  Timeout = 5

  default = multi (0) disk (0) rdisk (0) partition (1) \WINDOWS

  [operating systems]

  "multi (0) disk (0) rdisk (0) partition (1) \WINDOWS="Microsoft Windows XP Professional "/ fastdetect / noexecute = OptIn

• Message access denied when you try to contact support

  Hello, after trying to contact Apple Support, my browser displays this message:

  Access denied

  You don't have permission to access the 'http://getsupport.apple.com/GetproductgroupList.action' on this server.

  Reference #18.266cd417.1450962958.35a19121

  I thought that he might just have the browser (Chrome), so I tried another (Internet Explorer)... same error.

  I read somewhere that I should try to empty my cache... tried too, and it's the same thing!

  What can I do because I'm now stuck in a position where I can't access the Support section of the Web site?

  Thank you!

  This seems to be related to Apple to block your IP address for some reason any. Because you can't call Apple because it is the process which is a failure, you might try to jump to the solution for one user found here > Re: access is denied. You don't have permission to access the 'http://selfsolve.apple.com/agreementWarrantyDynamic.do' on this server (all services back-end from Apple are connected, it seems)

  The other two 'victims' in the thread never returned to report their success (or lack thereof)

  Try from another computer (or another location) would be exhausted your troubleshooting skills. Get with your ISP technicians (who may be able to contact Apple on your / their name) is your next step.

  Alert our hosts - who are not involved in the site other technologies that make housekeeping and other - you CAN get a way actually communicate with a real person to Apple, but try your next ISP

  Happy holidays

  CCC

• Access denied when you try to edit the C: program files / drive

  I'm trying to use PHP on my computer. By following the instructions during the installation an 'access denied' pop up appears whenever I try to save changes

  Hi JlaHills,

  Make sure that you are logged as administrator and check if you are faced with the question.

  Try to take possession of a disc and check whether the problem is resolved.

  To take ownership of a drive:

  1. click on the drive that you want to take control and then click Properties.
  2. click on the Security tab, click Advanced, and then click the owner tab.
  3. click on modify.  If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.
  4. click on the name of the person you want to give to the property.
  5. If you want this person to be the owner of the files and subfolders in this folder, select the Replace owner of subcontainers and objects to check.
  6. click on OK.

  If this does not work, I suggest you to activate the administrator account built in and check if it works.

  An administrator account is a user account which allows you to make changes that will affect other users. Administrators can change security settings, install software and hardware, and access all files on the computer. Administrators can also make changes to other user accounts.

  If you are logged in as administrator, then I suggest you turn on the built in user account and check if it works.

  In Windows Vista, the built-in Administrator account is disabled by default. In previous versions of Windows, an administrator account was created automatically during Out-of-Box-Experience (OOBE) with a blank password.

  An account administrator with a blank password is a security risk. To better protect the system, the built-in Administrator account is disabled by default in all new installations and upgrades of Windows Vista.

  HOW to: Enable the build-in the administrator account in Windows Vista
  http://support.Microsoft.com/kb/555910

  Please post back and let us know if it helped to solve your problem.

  Kind regards
  KarthiK TP

• Access denied when you try to access the folder CSC (location of offline files)

  Original title: instead of playing the files offline.

  I have installation folder for a user on the windows machine offline sync with an external drive of SAN. I noticed that the files do not synchronize with the SAN drive, so I changed the location to another drive of SAN. I disconnect old SAN offline synchronization and redirect the folder to the new SAN disk. I realized that he is a lot of files don't not sync from the old drive to SAN. but he was already disconnected. How can I find these files. I couldn't access the CSC folder in windows. Access denied even though I have the administrator rights on the machine.

  Help, please.

  This is the location of the file for files Offin on Windows 7. C:\windows\CSC

  Make sure you have full rights to the folder to access the files. If this isn't the case, follow the steps in http://technet.microsoft.com/en-us/library/cc753659.aspx to take possession of the file and the content it contains.

  I would also advise to go through http://answers.microsoft.com/en-us/windows/forum/windows_7-files/offline-files-access-is-denied/b1adc231-a4c2-4a5b-80b8-93269851febf for a possible solution.

  Let us know if that helps.

• Access denied when you try to copy files from CF Server ASP server

  I'm following the example of upload file in the CF help and it works fine. I can easily transfer a file to Server Web see only thing is, I need the file copied to another server. I tried < cffile action = "copy", but I get an access denied message. Here is the code I use. What should I change to be able to copy the file to the other ASP Web server on our network?
  
  < html >
  transfer the < head > < title > < / title > < / head >
  < body >
  Transfer the file < h2 > < / h2 >
  
  < cffile action = "upload".
  destination = "C:\Documents and Settings\ldtrip\".
  nameConflict = "overwrite".
  fileField = "Form.FiletoUpload" > "
  
  < cffile action = "copy" source = "C:\Documents and Settings\ldtrip\ #cffile. ClientFileName #. #cffile. "ClientFileExt #" destination = "\\iagweb\ribtrw\Files\" >
  
  
  < cfoutput >
  
  You have downloaded #cffile. ClientFileName #. #cffile. ClientFileExt #.
  #cffile successfully. ServerDirectory #.
  < / cfoutput >
  
  < / body >
  < / html >

  Just made a minor modification and ta - da. It works...

  destination = "\\iagweb\e$\ribtrw\Files\" >

• Access denied when you delete a file from a batch file

  I run a batch file to compress and then delete the original file.
  The file is with everyone full access, and therefore the file.
  I run the batch Administrator file (literally, right click and choose Run as administrator).
  The delete operation has always failed with the error: access denied.

  What Miss me?

  I use Windows 2008 Server R2 Standard Edition SP1.

  Hello

  Your question of Windows 7 is more complex than what is generally answered in the Microsoft Answers forums. It is better suited for the IT Pro TechNet public. Please post your question in the TechNet Windows 7 networking forum.

  http://social.technet.Microsoft.com/forums/en-us/w7itpronetworking/threads

• My computer says ACCESS DENIED when you try to put the values by defect of security + Itunes glitch thing? I need help?

  My computer is says ACCESS DENIED

  When I tried to do: http://support.microsoft.com/kb/313222/en-us

  This is the error I got! : (Sorry, really long).
  Monday, September 6, 2010 11:45:33
  -Configuration engine was initialized successfully.-

  -Model of reading Configuration information...

  -Rights of the user to configure...
  SeImpersonatePrivilege must be attributed to administrators. This setting is defined.
  SeImpersonatePrivilege must be assigned to the SERVICE. This setting is defined.
  Configure the S-1-5-19.
  Configure the S-1-5-20.
  Configure S-1-5-32-544.
  Configure S-1-5-32-551.
  Configure S-1-5-32-559.
  Configure S-1-5-32-545.
  Configure the S-1-1-0.
  Configure the S-1-5-6.
  Configure S-1-5-21-1141220282-763679081-1401190266-501.
  Configure S-1-5-32-555.

  User rights configuration was completed successfully.

  -Configure the group membership...
  Set up users.

  Group membership configuration was completed successfully.

  -Configure the 64-bit registry keys...
  Configure users\.default.
  Configure machine\software.
  Configure machine\software\classes.
  WARNING 5: Access is denied.
  Error security descriptor for machine\software\classes\.aa of construction.
  WARNING 5: Access is denied.
  Error security descriptor for machine\software\classes\.aax of construction.
  WARNING 5: Access is denied.
  Error security descriptor for machine\software\classes\ of construction. AMR.
  WARNING 5: Access is denied.
  Error security descriptor for machine\software\classes\.bwf of construction.
  WARNING 5: Access is denied.
  Error security descriptor for machine\software\classes\.cel of construction.
  achine\software\classes.
  WARNING 5: Access is denied.
  Error setting security on machine\software\classes.
  WARNING 5: Access is denied.
  Error setting security on machine\software\classes.
  WARNING 5: Access is denied.
  Error setting security on machine\software\classes.
  WARNING 5: Access is denied.
  Error setting security on machine\software\classes.
  WARNING 5: Access is denied.
  Error setting security on machine\software\classes.
  WARNING 5: Access is denied. (says this error ABOUT 1 000 times, I had to delete if it is not published on long!)
  Error setting security on machine\software\classes.
  WARNING 1336: Access control list (ACL) structure is not valid.
  Error setting security on machine\software\classes\Wow6432Node.

  Configuration of registry keys was completed by one or more errors.

  -Configure the 32-bit registry keys...
  Configure machine\software.
  WARNING 1336: Access control list (ACL) structure is not valid.
  Error setting security on machine\software\Licenses.

  Configuration of registry keys was completed by one or more errors.

  -Configure file security...
  Configure c:\program files\common files\speechengines\microsoft\tts.
  WARNING 2: The system cannot find the specified file.
  Error safe on c:\program files\common files\speechengines\microsoft\tts.
  Configure c:\programdata\microsoft\windows\drm.
  Configure c:\programdata\microsoft\windows\drm\cache.
  Configure c:\windows\repair\default.
  WARNING 3: The system does not have the specified path.
  Error setting security on c:\windows\repair\default.
  Configure c:\windows\repair\ntuser.dat.
  WARNING 3: The system does not have the specified path.
  Error setting security on c:\windows\repair\ntuser.dat.
  Configure c:\windows\repair\sam.
  WARNING 3: The system does not have the specified path.
  Error setting security on c:\windows\repair\sam.
  Configure c:\windows\repair\security.
  WARNING 3: The system does not have the specified path.
  Error setting security on c:\windows\repair\security.
  Configure c:\windows\repair\software.
  WARNING 3: The system does not have the specified path.
  Error setting security on c:\windows\repair\software.
  Configure c:\windows\repair\system.
  WARNING 3: The system does not have the specified path.
  Error setting security on c:\windows\repair\system.
  Configure c:\windows\system32\wbem\mof.
  Configure c:\windows\system32\windows media.
  WARNING 2: The system cannot find the specified file.
  Error on c:\windows\system32\windows media safe.
  Configure c:\windows\syswow64\export.
  WARNING 2: The system cannot find the specified file.
  Error setting security on c:\windows\syswow64\export.
  Configure c:\windows\syswow64\ias.
  Configure c:\windows\syswow64\wbem.

  File security configuration was completed successfully.

  -Set up the parameters of the General Service officer...
  Configure the sysmonlog.
  Error 1060: The specified service does not exist as an installed service.
  Error opening sysmonlog.
  Configure SamSs.
  Configure ntmssvc.
  Error 1060: The specified service does not exist as an installed service.
  Error opening ntmssvc.
  Configure netddedsdm.
  Error 1060: The specified service does not exist as an installed service.
  Error opening netddedsdm.
  Configure netdde.
  Error 1060: The specified service does not exist as an installed service.
  Error opening netdde.
  Configure dmserver.
  Error 1060: The specified service does not exist as an installed service.
  Error opening dmserver.
  Configure clipsrv.
  Error 1060: The specified service does not exist as an installed service.
  Error opening clipsrv.
  Configure the browser.

  Agent of General Service configuration was completed successfully.

  -Configure available attachment engines...

  Attachment engines configuration completed successfully.

  -Configure security policy...
  Configure password information.
  The administrator account is disabled.
  Guest account is disabled.

  Access configuration was completed successfully.
  Search anonymous LSA appoints setting: existing SD = D: (D; 0 X 800;) (A) (; xf1fff 0;) BA) (; 0 x 20801;) WD) (; 0 x 801;) (A) (a. 0x1000;) LS) (a. 0x1000;) NS) (a. 0x1000;) S-1-5-17).
  Configure the setting LSA anonymous search.
  Set up the nt\currentversion\setup\recoveryconsole\securitylevel machine.
  Set up the nt\currentversion\setup\recoveryconsole\setcommand machine.
  Set up the nt\currentversion\winlogon\cachedlogonscount machine.
  Set up the nt\currentversion\winlogon\forceunlocklogon machine.
  Set up the nt\currentversion\winlogon\passwordexpirywarning machine.
  Set up the nt\currentversion\winlogon\scremoveoption machine.
  Configure machine\software\microsoft\windows\currentversion\policies\system\dontdisplaylastusername.
  Configure machine\software\microsoft\windows\currentversion\policies\system\legalnoticecaption.
  Configure machine\software\microsoft\windows\currentversion\policies\system\legalnoticetext.
  Configure machine\software\microsoft\windows\currentversion\policies\system\scforceoption.
  Configure machine\software\microsoft\windows\currentversion\policies\system\shutdownwithoutlogon.
  Configure machine\software\microsoft\windows\currentversion\policies\system\undockwithoutlogon.
  Configure machine\software\policies\microsoft\windows\safer\codeidentifiers\authenticodeenabled.
  Configure machine\system\currentcontrolset\control\lsa\auditbaseobjects.
  Configure machine\system\currentcontrolset\control\lsa\crashonauditfail.
  Configure machine\system\currentcontrolset\control\lsa\disabledomaincreds.
  Configure machine\system\currentcontrolset\control\lsa\everyoneincludesanonymous.
  Configure machine\system\currentcontrolset\control\lsa\fipsalgorithmpolicy\enabled.
  Configure machine\system\currentcontrolset\control\lsa\forceguest.
  Configure machine\system\currentcontrolset\control\lsa\fullprivilegeauditing.
  Configure machine\system\currentcontrolset\control\lsa\limitblankpassworduse.
  Configure machine\system\currentcontrolset\control\lsa\lmcompatibilitylevel.
  Configure machine\system\currentcontrolset\control\lsa\msv1_0\ntlmminclientsec.
  Configure machine\system\currentcontrolset\control\lsa\msv1_0\ntlmminserversec.
  Configure machine\system\currentcontrolset\control\lsa\nolmhash.
  Configure machine\system\currentcontrolset\control\lsa\restrictanonymous.
  Configure machine\system\currentcontrolset\control\lsa\restrictanonymoussam.
  Configure machine\system\currentcontrolset\control\print\providers\lanman printing services\servers\addprinterdrivers.
  Configure machine\system\currentcontrolset\control\session manager\kernel\obcaseinsensitive.
  Configure machine\system\currentcontrolset\control\session manager\memory management\clearpagefileatshutdown.
  Configure machine\system\currentcontrolset\control\session manager\protectionmode.
  Configure machine\system\currentcontrolset\services\lanmanserver\parameters\autodisconnect.
  Configure machine\system\currentcontrolset\services\lanmanserver\parameters\enableforcedlogoff.
  Configure machine\system\currentcontrolset\services\lanmanserver\parameters\enablesecuritysignature.
  Configure machine\system\currentcontrolset\services\lanmanserver\parameters\nullsessionpipes.
  Configure machine\system\currentcontrolset\services\lanmanserver\parameters\requiresecuritysignature.
  Configure machine\system\currentcontrolset\services\lanmanserver\parameters\restrictnullsessaccess.
  Configure machine\system\currentcontrolset\services\lanmanworkstation\parameters\enableplaintextpassword.
  Configure machine\system\currentcontrolset\services\lanmanworkstation\parameters\enablesecuritysignature.
  Configure machine\system\currentcontrolset\services\lanmanworkstation\parameters\requiresecuritysignature.
  Configure machine\system\currentcontrolset\services\ldap\ldapclientintegrity.
  Configure machine\system\currentcontrolset\services\netlogon\parameters\disablepasswordchange.
  Configure machine\system\currentcontrolset\services\netlogon\parameters\maximumpasswordage.
  Configure machine\system\currentcontrolset\services\netlogon\parameters\requiresignorseal.
  Configure machine\system\currentcontrolset\services\netlogon\parameters\requirestrongkey.
  Configure machine\system\currentcontrolset\services\netlogon\parameters\sealsecurechannel.
  Configure machine\system\currentcontrolset\services\netlogon\parameters\signsecurechannel.

  Registry values configuration completed successfully.
  Configure the log settings.

  Configuration of the audit / log has been successfully completed.

  -Configure available attachment engines...

  Attachment engines configuration completed successfully.

  Engine - UN-initialize configuration...

  When I tried to solve this problem: http://social.answers.microsoft.com/Forums/en-US/vistasecurity/thread/9d71a399-d168-43ec-8083-673f5258d09c?ppud=4

  I can't back up my files anywhere that it says access denied :(
  

  Also, WHENEVER I open itunes windows must reconfigure and change all my default settings but my music is still there! It says itunes reconfiguration and it still load and say that is is to install itunes?

  I really need help please

  Hi mewlar101,

  You run the computer as an administrator?

  Step 1: Disable the security software; Follow the steps mentioned in the link below

  Disable antivirus software

  http://Windows.Microsoft.com/en-us/Windows-Vista/disable-antivirus-software

  Important: Activate security software once everything is done.

  Now, check if you can back up your files

  Step 2: Check with another profile for the Admin user

  If you do not have a different user account, you will need to create a (see link below). If everything works fine with a different user profile, you can infer that the user profile is damaged, click on the link to find out how to solve this problem.

  Create-a-user account

  http://Windows.Microsoft.com/en-us/Windows-Vista/create-a-user-account

  Difficulty of a corrupted user profile

  http://Windows.Microsoft.com/en-us/Windows-Vista/fix-a-corrupted-user-profile

  On your problem of ITunes, you can post your query on the discussion group by Apple for more specialized help

  http://discussions.Apple.com/category.jspa?categoryID=149

  Thank you, and in what concerns:

  Ajay K

  Microsoft Answers Support Engineer

  Visit our Microsoft answers feedback Forum and let us know what you think.