Access denied when you try to copy files from CF Server ASP server

Similar Questions

• Windows does not when you try to copy files from a micro sd using a T-flash card

  I have never had any problems to copy files to a flash drive in the past, but recently, I encountered this problem. Windows Vista, connected to the flash player, open the folder, dragged 1 file, and copied correctly. Attempted to copy a second file and he hung up then says windows does not. I pushed cancel and it also says windows does not. He would not cancel function so I went to the Manager of tasks to complete, but without success. I had to reboot the computer, I have tried to reboot several times and tried to copy but without success. Any suggestions on how to fix it?

  Hello

  The same information on the key USB applies to map drives
  so do not put all the files and folders to the root of the drive.

  Have you tried the card in other card readers? Sometimes the reformatting
  the map will refresh it.

  ======================================================

  It is the troubleshooter for the readers of SD cards which of course is very similar.

  If you can not get the card reader to work, it can be replaced or an external card reader is not
  Dear.

  They go bad sometimes. Try these:

  / Settings (BIOS/CMOS) often F2 when you start then look at the screen - make sure that the USB port is enabled.

  -----------------------------------------------------------------------------------------------------------------------

  Control Panel - Device Manager - hard disk - drive SD card or similar - double click - tab driver-
  Click on update drivers (this likely will do nothing that MS is far behind the certifying drivers) then right click
  following the UNINSTALL.

  Now bring the controllers USB - right click - UNINSTALL everything in category one at time EXCEPT
  the category itself - REBOOT. This will refresh the USB driver stack.

  Here is the similar procedure under XP, Vista is the same, except that we need to clear the specific device if present.
  http://support.Microsoft.com/kb/310575

  Do 1 above.

  USBDeview is a small utility that lists all USB devices currently connected to your computer, as well as
  all USB devices that you previously used. Run Options and check the 1st three choices to see if one is
  it. you can remove all instances of the drive and restart again.
  http://www.NirSoft.NET/utils/usb_devices_view.html

  Start - type in the search box - Windows Disk - find Windows Disk Management on the list above.
  Right-click - look RUN AS ADMIN to see if there is a drive letter assigned or a conflict.

  Check with the manufacturer of your system for the updated drivers - some card readers to do not use windows
  drivers.

  ----------------------------------------------

  If necessary try these two:

  Tips for solving problems of USB devices - and a Mr Fixit
  http://windowshelp.Microsoft.com/Windows/en-us/help/c39bd203-f729-47a4-8351-83291e13c8a81033.mspx#EGB

  Hardware devices not detected or not working - Mr. Fixit
  http://support.Microsoft.com/GP/hardware_device_problems

  Hope that helps.

• I get an error of access denied when you try to import photos from my digital camera

  For some reason, windows prevented me from importing photos from my camera, and I get the following message is displayed. (The following error has occurred when importing IMG_ #.) JPG: access denied) I use windows 7. I use a USB cable to connect to the computer and never had a problem until now.  I have tried everything I can think to see why this is happening and I don't see a reason.

  Hello

  1. don't you make changes to the computer until the problem occurred?

  I suggest you follow the steps mentioned below.

  Method 1: Restore the default import settings

  Visit the link below to learn how to restore the default import settings.

  http://Windows.Microsoft.com/en-us/Windows7/change-settings-for-importing-pictures-and-videos

  Method 2: Test of the issue on a new user account

  http://Windows.Microsoft.com/en-us/Windows7/create-a-user-account

  Method 3:
  The problem can also be caused by your security such as anti-virus program or a firewall of Windows /Defender that can have conflicting parameters as to not not to perform certain tasks. I suggest you temporary disable antivirus and firewall and check the result again. You must activate new security that you was disabled programs.
  Disable the antivirus software:
  http://Windows.Microsoft.com/en-us/Windows7/disable-antivirus-software

  Important note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks.

  Additional information:

  How can I get pictures from my camera to my computer?

  http://Windows.Microsoft.com/en-us/Windows7/how-do-I-get-pictures-from-my-camera-to-my-computer

  Hope this information is useful.

• Windows Explorer crashes when you try to copy files (from dvd - rom on the hard drive)

  This is the error I get, copied from the technical details of UAC.

  I tried to create the new account and sfc/scannow
  sfc/scannow pointed out problems and errors, but is unable to repair.
  The Explorer.EXE version 6.1.7600.16450 program ceased to interact with Windows and was closed. To see if there is more information about the problem, check the history of the problem in the control panel of the center of the Action.

  Process ID: 98c

  Start time: 01ced605f3f95e5c

  Time of termination: 60000

  Application path: C:\Windows\Explorer.EXE

  Report ID:
  Is that the next step of repair window?
  Thanks in advance

  One of the recurring errors in Event Viewer was the 'Source' following 'KScsiPrt ':

  The description for event ID 9 source KScsiPrt is not found. Either the component that triggers this event is not installed on your local computer or the installation is corrupted. You can install or repair the component on the local computer.

  
  

  If the event is on another computer, the display information had to be saved with the event.

  
  

  The following information has been included in the event:

  
  

  \Device\Scsi\KScsiPrt1

  Which may indicate a problem with the SCSI KernSafe controller.

  Can you try disabling the controller SCSI KernSafe in Manager devices as suggested hereand see if that makes a difference.

  You may need to restart the computer after you disable the driver.

• "error when you try to copy files from music for the cd drive.

  CD or dvd

  tried to copy the music files for the disk. The disc said that DVD and the radio do not play it says: "cd error". Do I need to use a CD or I'm doing something else wrong? Thank you.

  Hello

  Check with the experts here
  http://Club.myce.com/

  Burned CD does not not in car CD player
  http://www.andybrain.com/archive/MB/burned_cd_in_car_player.htm

  Why the CD player in my car does not play the CD that I burn?
  http://www.Microsoft.com/windows/windowsmedia/KnowledgeCenter/mediaadvice/0091.mspx#EKF

  I hope this helps.
  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• I get "access denied" when you try to add the component 4543BD

  I get "access denied" when you try to add the 4543BD to my diagram. This component has been added since a previous version. I use Multisim version 12.0.0 student edition.

  Hi Diarra,

  I checked my database and the 4543 isn't in the student edition. If you open a drawing that was created in a version more recent as the education edition and copied the part to your database, when you place this part, you will get the access denied message.

  Attached is a diagram with the part, you can open it and build you circuit around it.

• I have 5 "MY BACKUP" folder on my drive C in 2008. How can I remove the old ones. Receiver error MSG "Access denied" when you try.

  I have 5 "MY BACKUP" folder on my drive C in 2008. How can I remove the old ones. Receiver error MSG "Access denied" when you try.

  Hi PJG_918,
   
  To resolve this problem, you must turn off Simple file sharing and then take over the folder.
   
  Here is an article that will explain the procedure to the same thing:
   
  "Access denied" error message when you try to open a folder

• Photoshop cs4 access denied when you try to install from disk in Windows 7 64 bit.

  Photoshop cs4 access denied when you try to install from disk in Windows 7 64 bit. I tried in

  safe mode and it starts to install, but get an error there as well.

  What should I do?

  So when you put the disk in it does not work properly? When the disc is inserted, you should have a window pop up with 2 options. 1. install and another to see what is on the disk. Choose to open the disc or explore. Navigate to the folder where is the photoshop CS4 .exe file (which runs the Setup program), right-click on the .exe file and choose Run as administrator and it should start. See if it will install. If this isn't the case, then read below.

  I don't know how long you got in the installation until so chances are, you will need to run the CS4 Cleanup utility. 2 levels to run but do not use 1 or 2 just type number 3.

  http://www.Adobe.com/support/contact/cs4clean.html

  You may need to run the utility windows install cleanup too

  http://support.Microsoft.com/kb/290301

  Before you try to reinstall the software make sure that adobe reader is not installed. If it is delete. It has caused problems in the past with vista and CS4 installs.

  You can also disable windows Defender and all antivirus software. You can keep UAC Windows 7.

  When installing CS4 to 90 percent, it stops almost and may take 5 to 10 minutes at the end. It's normal. What a pain huh...

  After the installation is complete, restart

  After restarting, go to the icon of CS4 64-bit or 32-bit (depends on 32-bit or 64-bit Windows 7) in the starting area, right-click on CS4 64-bit (if you have windows 7 64 bit), and then choose Properties, Compatibility tab, and then check run as administrator at the lower part. Hit apply, ok to finish.

  Now, run CS4 and run the update.

• File modified icons and error when you try to copy files: 0 x 80070052

  ll of a sudden, I found my Word document files, pdf and other files differnet looking and I got this message eorro 0 x 80070052 when I tried to copy

  I tried to solve this problem, but I forgot:

  I have norton antivirus on my pc and windows vista, I suddenly found that all my files (documents, photos odfs... etc) all have a strange icon placed in the original top icon it looks like Media Player. I can open them on the pc, but I have treid to opencoy to my USB, he initially said no space and I deleted files. ND, then I tried to copy these fields to it, I got this error message:

  0 x 80070052

  and I think that it is aa problem with my antivirus it diesnt run correctly.

  pelase advise I can't afford lossing my documents.

  Thank you

  Hello

  Error 0 x 80070052 occurs usually when you try to copy files to an external storage device. You can format the drive to the FAT32 file system format and check if this solves the problem.

  Come to your icons of files problem, I suggest you perform a system restore to restore the computer to an earlier point in time before the problem occurred.

  See these articles for help:
  http://Windows.Microsoft.com/en-us/Windows-Vista/what-is-system-restore
  http://Windows.Microsoft.com/en-us/Windows-Vista/system-restore-frequently-asked-questions

  Kind regards
  Afzal Taher
  Microsoft technical support engineer

• How can you stopPhotoshop CC2015 access denied when you try to scan photos?

  How to stop Photoshop CC2015 of access denied when you try to scan photos? I had to resort to the application of the C6. Was able to use the CC2015 until tonight.

  Have you tried restarting your scanner and restarting your PC?

• "Access denied" when you try to open a session

  I get the message "Access denied" when I try to log into Windows, I have not changed my passwords or anything I know. The last time I was on the PC, it was working fine, the next time I logged in that it gave me this message.

  Hello

  Do you have any other user account on the computer?

  Try the following steps:

  Step 1: Check if you can connect to Windows in safe mode.

  See this link for more information on how to start in safe mode:
  http://Windows.Microsoft.com/en-us/Windows-Vista/start-your-computer-in-safe-mode

  If you can connect to your account in safe mode, and then perform a system restore.

  Step 2: restore your computer to an earlier point in time in safe mode.

  Check out these links for help:
  http://Windows.Microsoft.com/en-us/Windows-Vista/restore-system-files-and-settings  
  http://Windows.Microsoft.com/en-us/Windows-Vista/system-restore-frequently-asked-questions

  Kind regards
  Afzal Taher-Microsoft Support.
  Visit our Microsoft answers feedback Forum and let us know what you think.

• "Access denied" when you try to delete some adware

  Original title: adware on my laptop

  I have

  I'm "Access is denied" when you try to delete some advertising software which has been downloaded to my laptop somehow. I tried to delete these files using my add/REMOVE icon, as well as through my C drive, listing files, and the attempt to delete in this way.

  I'm still on Windows XP (no longer supported), and I try to save files, etc to my new Windows 8.1 but worry about the adware transferred as well.

  The files are:

  libeay32.dll

  cyycfhtzro32.exe

  Files B021CBBD-E38E-4F8C-8E93-6624B0597A23

  ssleay32

  etmajyzoqm.exe

  etc.

  Any help you can give me to get rid of this ad-ware/malware, will be greatly appreciated.

  Steven

  Delete Adware & puppies with these tools. Check the updates first and then analyze with each of them at a time until your machine is clean.
   
  
  AdwCleaner (free)
  http://www.bleepingcomputer.com/download/adwcleaner/
   
  
  Malwarebytes (download the free version)
  https://www.Malwarebytes.org/free/
   
   
  
  HitmanPro (30 days free trial)
  http://www.SurfRight.nl/en/hitmanpro
   
  
  Junkware Removal Tool (free)
  http://www.bleepingcomputer.com/download/junkware-removal-tool/
   
  
  If necessary, reset your browsers. For IE:
  http://Windows.Microsoft.com/en-us/Windows7/reset-Internet-Explorer-settings
   
  
  Some reading:
   
  
  On these toolbars and modules - potentially unwanted programs (PUP)
  http://www.bleepingcomputer.com/forums/t/407147/answers-to-common-security-questions-best-practices/?p=3187642
   
  
   

• Windows 7: error 5 (access denied) when you try to start the Volume Shadow Copy (VSS) service

  System: Win 7 Ultimate x 64 on a HP Pavilion DV6. My account is the user account only suitable on the laptop and an administrator account.

  When you try to do a system restore, it came with an error that the Volume Shadow Copy Service did not work, even if this error code is not relevant for the purposes of this question later, I managed to run the system restore in SafeMode to an old restore point...

  When you try to turn on VSS, I checked services.msc (which I ran as administrator) and VSS was off and on the manual. I tried clicking on start, the following error message came:

  "Windows didn't start the Volume shadow copy on the Local computer service."
  Error 5: access is denied. »

  I then switched to automatic and tried again, same error. I tried since everything I can possibly think (including the definition of back and forth between manual & auto then trying the solutions below) to get the service starts, nothing helps. The solutions tried so far:

  -net start vss high cmd - returns the same error (error 5 access is denied)
  -high vssvc.exe cmd - same
  -changed the full control permissions for me, the group admin and NETWORK SERVICE (that I had to add) to the System32 folder and vssvc.exe but no change
  -changed the permissions to full control for myself, admin and NETWORK SERVICE group (who even once, I must add) for VSS in regedit (open as administrator) still nothing
  -even tried to restart explorer.exe a high cmd and a task manager high and again made the permissions - still nothing.

  The only thing I haven't done is run a sfc scan, but tbh, I doubt that will fix anything. It also seems that VSS has been turned off for a while, as my last restore point was about 3 months ago and I installed things since.

  Any suggestions/ideas would be appreciated, because I'm going nuts with that now! Thank you!

  The Volume Shadow Copy Service must not be on auto-start.

  According to the site TechNet Microsoft VSS THAT was introduced with Windows XP SP1 and since that time it has always installed as manual start since he does not need to be started automatically and it works day and night to do nothing.  Some places say different times when VSS has been introduced, but be sure that it was a long time ago.

  A popular site to see how Windows Services should / could be put in place is here:

  http://www.blackviper.com/service-configurations/

  If you've read about VSS on Microsoft TechNet, it says:

  

  https://TechNet.Microsoft.com/en-us/library/hh125927 (v = ws.10) .aspx

  So do you think the MS TechNet site is fake and that each installation of Windows since XP has a badly installed VSS Service?  If that were the case all Windows systems in the world would be in trouble.

  On an unafflicted system if you open the services applet and observe the VSS Service, it should look like this:

  

  So if you start a backup operation or even create a Restore Point, go back to the Service applet and press F5 to refresh you'll see that the VSS Service changed its status to start:

  

  Once the operation is complete the VSS Service will stop itself (it may take a while).

  That's how it is supposed to work.

  We should certainly be able to affect the automatic VSS Service and you should be able to start, but you shouldn't need to.  People who say that "solved their problem" forgets to mention the days/weeks to try things that lead to get their system of work.  There is no way of knowing which of the dozens of things that they could have tried really solved the problem.

  You say that the system restore worked in Mode safe (but not a normal startup) and if it is true that means usually something to load in a normal trunk causing a problem and that something is usually an antivirus/antimalware application that is 'protect' your system against the changes.  When you start mode safe these things are usually not loaded this is why sometimes your system restore mode without failure.

  Contributors known for these programs are Norton, McAfee, Avast, Avira, Kaspersky and probably others.

  So what antivirus/antimalware programs you are running and have checked their support pages for known problems with backup/restore system restore?

  Norton has even a page about these issues:

  https://support.Norton.com/SP/en/us/home/current/solutions/v51118464_EndUserProfile_en_us

  Even McAfee told their product to uninstall completely before doing a system restore:

  "Intel Security recommends that you remove McAfee security products before to proceed with an upgrade of the operating system or the Microsoft System Restore and then re-install your McAfee product when the update/restore is complete. "
  

  So I assumed that whatever your AV program happens to be could be part of the issue here - but we don't know what it is.

  We know error 5 is a permissions/access denied error type, but you shouldn't make adjustments to get VSS to start if something is wrong.  If as you have tried adjustments have been necessary every Windows system in the world should also make these adjustments and coming is not past.

  Of course, now, your system might be more affected since you've been changing permissions on the things trying to VSS to start when there is probably not a problem with VSS in the first place, so who knows what condition are in now.

  You could start by uninstalling what your AV software (most manufacturers have a special program for that) and by eliminating third-party applications that are known to interfere.  You can always reinstall them again later, no?

• Access denied when you try to edit BOOT. INI.

  I was using Norton Ghost to clone a drive for one of my clients.  The clone has failed for some reason any.  After powered my system down to remove the two discs I was working with my system turns on no longer.  I get the NTOSKRNL. EXE missing error.  I decided to take my hard drive to another computer to check the boot.ini file.  The other system is Windows 7.  I get ACCESS DENIED when I United Arab Emirates, the attrib command to reset the attributes S & H.  I have to take ownership of the file.  Can someone help me?

  Why don't put you your XP drive afflicted and fix it using the XP Recovery Console?

  The situation is usually very simple to solve without moving from your HARD drive to another computer - and how you can fix this if you didn't have another computer to move to-reinstall XP from scratch or 'try' a repair installation?   If you had any XP installation CD?  (The Uuless Ghost FUBAR had somehow your Windows installation)

  You don't have a Recovery Console CD?  Make one following the instructions on this link:

  http://www.bleepingcomputer.com/forums/topic276527.html

  If the NTOSKRNL. EXE is really missing, or even suspect, that's just replace it by using the Recovery Console.  It is in many other places on your HARD drive - just copy in a replacement and be on your way.

  If you have doubts about your boot.ini, just rename or delete (rename boot.ini.bak boot.ini).  XP doesn't have a boot.ini file to start in a general single partition configuration.  It will complain, but still boot without one if all the other pieces are in place.  Your question of the NTOSKRNL. EXE missing error is unlikely to have anything to do with the boot.ini anyway, but you can try things if you wish.

  If you want to take the right of a folder/file on a drive that has been moved to another computer, to implement this article:

  http://support.Microsoft.com/kb/308421

  I know not if attrib works the same in Windows 7, but XP, you type a command as the start, run or from a command prompt:

  attrib - shr c:\boot.ini

  It would be 'less' (remove) the attributes system, hidden and read-only.

  Here's a boot.ini file General who can help as an example, or after the content of yours, and we can take a look.

  [boot loader]

  Timeout = 5

  default = multi (0) disk (0) rdisk (0) partition (1) \WINDOWS

  [operating systems]

  "multi (0) disk (0) rdisk (0) partition (1) \WINDOWS="Microsoft Windows XP Professional "/ fastdetect / noexecute = OptIn

• Access is denied when I try to restore files from the Recycle Bin

  Original title: error

  My husband accidentally sent his files to the trash, Einstein he is. When I click on restore everything, I get a code error that reads "C:\ProgramData\Microsoft\Windows\WER\ReportQueue\report0955479c\is is not accessible. Access is denied. "Help!

  Terristreasures

  Hello

  ·         What is the location of the files that have been deleted?

  ·         Have you logged as administrator?

  ·         You try to restore the Recycle Bin of your husband or your account account?

  ·         You can access the location of the file mentioned in the error? (C:\ProgramData\Microsoft\Windows\WER\ReportQueue)

  To view the location of the file error try to enable hidden files.

  http://Windows.Microsoft.com/en-us/Windows-Vista/Show-hidden-files

  Follow these methods and check if that helps:

  Method 1:

  I suggest you to manually restore the file from the Recycle Bin and check.

  (a) on the desktop, double-click Recycle Bin.

  (b) to restore a file, right-click and then click on restore.

  http://Windows.Microsoft.com/en-us/Windows-Vista/recover-files-from-the-Recycle-Bin

  Method 2:

  Also I suggest that you start in safe mode and check if you can restore files from the Recycle Bin.

  http://Windows.Microsoft.com/en-us/Windows-Vista/what-is-safe-mode

   

  Method 3:

  If you are not able to access these files try ownership of the folder and check if you can restore the files.

  Troubleshoot "access denied" when opening files or folders

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-access-denied-when-opening-files-or-folders