access is denied-, but it's my computer!
in the windows Task Manager, I have a service that is running (HssWD) and I can not closed down, it said "access denied" WHY?
You can use one of these two programs; they do a good job of uninstalling programs 'difficult ':
Revo Uninstaller http://www.revouninstaller.com/revo_uninstaller_free_download.html
IOBit Uninstaller http://www.iobit.com/advanceduninstaller.html
--
SC Tom
Tags: Windows
Similar Questions
-
I ran cmd on my computer and it says "windows resource protection found corrupt files but was unable to correct. He gave me a newspaper to look at, but access is denied. c:\windows\logs\CBS\CBS.log? /
Hello
This should help you.
You need to run as admin.
"How to analyze the entries in log file generating the program Checker (SFC.exe) resources of Microsoft Windows in Windows Vista"
http://support.Microsoft.com/kb/928228
And if the problems cannot be fixed, you may need to do a repair upgrade installation.
"How to perform a repair for Vista Installation"
http://www.Vistax64.com/tutorials/88236-repair-install-Vista.html
See you soon.
-
Original title: mcshield is a nightmare for me.
McShield is a nightmare for me. Its location is c:\program files\common files\mcafee\ACore\mcshield.
When I try to stop it in services.msc I get the error "could not stop McAfee Amti-Malware Core service on Local computer. Error 5: access is denied. »
I have administrative rights at sign on. How to stop this monster?
http://www.pchell.com/virus/uninstallmcafee.shtml
read this through
If it was me I would uninstall McAfee, it is not highly recommended by someone I know.
Once it is removed, try a free antivirus, I use MSE, but you have to read the instructions first!
http://www.Microsoft.com/en-US/Download/details.aspx?ID=5201
Download MSE
http://experts.Windows.com/w/experts_wiki/89.aspx
MSE installation checklist
If you choose to use Mcafee, download autoruns, which shows which takes over at the start and you can disable here.
AUTORUNS
http://TechNet.Microsoft.com/en-us/sysinternals/bb963902
Above is autoruns to loadup questions
If you still can't find the entry in the registry, download Autoruns. Let it finish the scanning, then click the Services tab. Find the name of the service 'wrong' in the left column ("Autorun entry"). Right click and select ' go to '. You will go straight to the appropriate entry in the registry for editing.
I would like to examine what you load at startup. You should see if you have any programs from loading during the startup process, which can be changed on request.
With Autoruns, you can deselect an item which disables startup, or you can click with the right button on an item, then remove it. If you clear the check box that you can check back for re - activate the element. It is an approach much safer than editing the registry and better than using msconfig.
Another useful feature of the program is that you can click with the right button on an item and select search online to get information about the selected item.When you use Autoruns, you will need to click on the "Connection" tab to see what runs at startup.
-
PC XP sees but cannot access Vista PC on network. Access is denied!
I have 4 computers on a network. The network is set up in a private capacity. 3 computers XP Home can meet and 1 PC Vista Home Premium and can share files between the computers XP 3. The Vista PC can see other computers and can send files to them quite happy.
However, when one of the XP computers trying to access the Vista computer I immediately get an error "\\VistaPC is not accessible. You might not have permission to use this resource network etc etc. Access is denied. "
I turned on the discovery of the network, public folder sharing, file sharing and printer.
Protected by password sharing and multimedia file sharing are turned off, but all shared folders on the Vista PC all have their set of permissions for everyone because I don't want to have to enter the username and password whenever I need access.
LLTD is installed and Vista network map shows all devices and their correct connection; all wired through a Netgear router except 1 wireless XP.
Help, please. It drives me crazy!
I only use the Windows Firewall and AVG Free anti-virus.
Well, I finally solved my problem, but don't know what action it reached or if it was a combination of actions. If anyone is interested, here's what I did.
On the Vista machine, I edited sharing the folder Public, all subfolders and files to share fully.
Checked the security settings for all of the public folders, subfolders and files, and then assign full control to all users.
'Everybody' added as a user and allowed full control for this user.
Restarted after each step but when even could not access shared folders on the Vista machine.
In desperation I edited the registry; went to HKEY_LOCAL_MACHINE / SYSTEM / CurrentControlSet / Control / Lsa
Change the value of a key called "restrictanonymous" to 0 instead of 1Quick restart and Hey Presto my network to work properly
My network is secure and so I didn't bother reduce some apparent security settings. Don't know if it's appropriate for everyone but it might give some clues.
Good luck
-
Good evening!
About 2 days ago my laptop not able to connect to the internet with wireless on, a brand of red x on the computer icon in the bottom right. When I hover the mouse over this icon, it shows ' connection status: unknown, the dependency service or group could be started. " I check services and found DHCP stopped running, I tried to start it manually, it shows "Windows didn't start the DHCP Client service on Local computer." Error 5:Access is denied. "I did ' sfc/scannow' and found no errors.
I use a laptop from my friend and it works great! So there is nothing wrong with the router but my own laptop. My laptop runs windows Vista editions Home Premium with Service Pack 2.Need help! Please, need to connect to the internet to go to school online. Thanks in advance for any help!
Very respectfully,.
Jay2010Hello
Failed to start the Service on the local computer's DHCP Client (applies as well to Vista)
http://WindowsXP.MVPs.org/DHCP.htm----------------------------------------
Start - type in the search box-> find CMD top - right on - click RUN AS ADMIN
You can copy and paste this command, and then press enter
netsh winsock reset catalog
======================
Run checkdisk - schedule it to run at the next startup, then apply OK then restart your way.
How to run the check disk at startup in Vista
http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html----------------------------------------
Try setting all Windows services on their default values.
Start - type in the search box-> find Services at top - right click - RUN AS ADMIN
Vista default services
http://www.blackviper.com/WinVista/servicecfg.htm---------------------------------------
Actually try updating your driver: (use a wire or download on another computer and transfer via)
removable media)Control Panel - network - write down of the brand and the model of the Wifi - double click top - tab of the driver - write
version - click the driver update (cannot do something that MS is far behind the pilots of certification). Then
Right click on the Wifi device and UNINSTALL - Reboot - it will refresh the driver stack.Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htmHow to install a device driver in Vista Device Manager
http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.htmlDownload - SAVE - go where you put it - right click – RUN AS ADMIN.
You can download several at once however restart after the installation of each of them.
After watching the system manufacturer, you can check the manufacturer of the device an even newer version. (The
manufacturer of system become your backup policies).Repeat for network (NIC) card and is a good time to get the other updated drivers as Vista like
updated drivers.I would also turn off auto update for the drivers. If the updates Windows suggests a just HIDE as they
are almost always old, and you can search drivers manually as needed.How to disable automatic driver Installation in Windows Vista - drivers
http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx---------------------------------------
You can get more help in these forums.
http://social.technet.Microsoft.com/forums/en/category/windowsvistaitproI hope this helps.
Rob - bicycle - Mark Twain said it is good.
-
Visible ReadyDLNA, but access is denied
Hello
I have a 1 TB external drive connected to my router. I can access the drive as a drive of the PC network via WiFi without any problem. - but I can't access the drive as a media server.
Both options 'enable media server' and "enable TiVo support" is enabled, the scan is set to automatic (well you do not click anything else here) and I gave the media server a name. It is visible on all devices - PS3, Yamaha, engineering app on Android phone, PC network drive...--> but NO devices can access! It said "access denied" the other said 'no file' windows says "connection was not accepted" etc... It is very annoying because he used to work before.
It is certainly a problem of router and not of any device as any device can open the media server. I just changed the settings on the router - only the name of the server, SID and so on. I have already restored the router to the factory settings, but it's the same then! "ReadyDLNA" is visible on all devices, but access is denied.
Thank you very much for your help!
Hi @SarastroSaruman,
NETGEAR routers can handle multimedia 25000 and 10000 files for iTunes.
Kind regards
Dexter
The community team
-
original title: error 5 access denied firewall
Failed to start service Windows Firewall/Internet Connection Sharing (ICS) on the local computer. Error 5: access is denied. »
Hi vipin sharmavg,.
1. did you of recent changes on the computer?
2. do you have security software installed on the computer?
See the below Microsoft article and try the steps mentioned, check if it helps.
You cannot start the Windows Firewall service in Windows XP SP2
-
access denied to win xp computer teacher trying to access a shared folder on Windows 7 computer at home using a peer-to-peer network. I enabled netbios over tcp/ip on computers
Hello
Try the steps listed in the link and check if this may help: "Access denied" error message when you try to open a file: http://support.microsoft.com/kb/810881
-
The backup computer fails with the error "access is denied. (0x80070005) »
original title: computer backup failure
My computer will be back up to a point, then will be an error "access is denied. (0x80070005) "at the same time, Microsoft security essentials SAIS it detects a potential threat.
My question is this: if he stops because it detects a corrupted file? or is there an error with a certain application that prevents a full backup?
Hi Cyberwasp35,
· Exactly how are you trying to backup?
· You run the computer as an administrator?
· Have you tried a backup on an external hard drive?
Try the following steps.
Step 1
Perform an online scan to remove the threat detected by the basics of Microsoft security during the backup process
To make online scan click on the link below:
Online analysis of Microsoft security essentials
http://OneCare.live.com/site/en-us/default.htm
Try to disable antivirus software and check if the backup is successful.
http://Windows.Microsoft.com/en-us/Windows-Vista/disable-antivirus-software
Note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you do not disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network during the time that your antivirus software is disabled, your computer is vulnerable to attacks.
Step 2
This error can also occur because the recovery partition is enabled for the file backup or restore of the system and is almost full. To work around this problem, do not select D:\ as a backup source. In addition, go to the System Protection in Control Panel and make sure that D:\ is not activated for restore points.
(1) open the backup and restore by clicking on the Start button, clicking Control Panel, clicking system and Maintenance, and then clicking the backup and restore.
2) click change settings. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.
(3) clear the partition D drive if it is selected, and then try to backup again
Check if the service is stopped or started. Change it to start if it is stopped. The service name is windows backup.
Reply back with the results
-
On Windows XP Professional SP3 I tried to take possession of the C:\Program Files folder, using the method described in http://support.microsoft.com/kb/308421, but after selecting the new owner (admin user) and clicking on apply, there is always an error:
SecurityUnable to set new owner on Program Files.Access is denied.The system works correctly, except that when you try to install & H R Block tax software, installation fails when trying to set permissions. Which lead me to discover that despite be logged in as an administrator and have all permissions on the folder, I still could not take ownership. There is none of the folders encrypted on this machine. Many other packages have been installed, including the other years of & H R Block. I can create and delete folders under Program Files. On the owner tab, there are only two options under name: the admin user and the Administrators (the current owner) group. What must I do in order to manage this file?Hi Ron,
I would say you turn off all antivirus and firewall on the computer and then try to take ownership of the folder and check if you are able to take possession of the file.
Note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks.
See also the link: "Access denied" or other errors in the access to or work with files and folders in Windows
http://support.Microsoft.com/kb/2623670 -
Cannot delete the file, access is denied
try to format the old drive hard could not
all files deleted but can not delete 2 files adobe indicates that access is deniedSchroeder7952,
To add to what mysoul said, you can also try the following:
To resolve this problem, you must turn off Simple file sharing, and then take ownership of the folder:
1.
Turn off Simple file sharing:
one.
Click Start and then click my computer .
b.
On the Tools menu, click Folder Options , and then click the view tab.
c.
Under Advanced settings , clear the use simple file (recommended) sharing , and then click OK .
2.
Right click on the folder that you want to take control and then click Properties .
3.
Click the Security tab, and then click OK in the Security message, if an unknown device appears.
4.
Click Advanced , and then click the owner tab.
5.
In the name list, click your user name, administrator , if you are logged in as administrator, or click the Administrators group.
If you want to take ownership of the contents of this folder, click to select the check box Replace owner of subcontainers and objects .
6.
Click OK .
You may receive the following error message, where folderis the name of the folder you want to take care of:
You are not allowed to read the contents of directory folder . Do you want to replace the the directory permissions with permissions granting you full control? All permissions will be replaced if you press Yes.
7.
Click Yes .
8.
Click OK , and then reapply the permissions and security settings that you want for the folder and the contents of the folder .
More information can be found in 810881 KB.
Lisa
Microsoft Answers Support Engineer
Visit our Microsoft answers feedback Forum and let us know what you think. -
When I try to copy pictures from my computer to a Lexar removable I get this message. "Cannot create or replace family photos. Access is denied. Make sure that the disk is not full or write protected and this file is not currently in use. Please help, but keep it simple that I am barely computer literate
Just a guess... but maybe you copied too
files in the directory root of the card. (Root directory
simply means level 1 with no folder)Remove files from the media, and then try again.
For example I just tested a 1 GB SD card and the
maximum number of files I can copy to the root
Directory is 180. If I add a file more I get a dialog box
who says: "cannot copy IMG_4321; The directory
or file cannot be created. And if I try to add a file
before removing a file to make room for it... I have
Get the following message: "unable to create the folder.
"New folder" failed to create the directory or file.If I make space by deleting files and add empty
files to the card... I can copy as many files as I have
here in the files (up to the limit of memory of)
the card).I don't know if you noticed but most digital
Cameras to create folders with 100 photos per folder.
They do not image files in the root directory
of the card. -
My
System Type X 86-based PC
Processor x 86 Family 6 Model 23 Stepping 10 GenuineIntel ~ 3324 Mhz
A05 BIOS Version/Date Dell Inc., 07-31-2009
SMBIOS 2.5 versionI'm trying to schedule a new task I get this error
The new task could not be created specific error is 0x80070005: access is denied
I am an administrator for this computer and I am connected to the office network.
I downloaded a patch KB904423, but it tells me that the installer has detected that the SP of the system version is newer the updte I am applying, I did not need to install this update
Is there any fix for this?
Thank you
Hi dgxp64,
· The computer is on a domain network?
Method 1: Temporarily disable the antivirus on the computer program and check if it helps. If it works, you may need to check the settings of the program.
Note: Check that you activate your anti-virus protection on the computer back after you complete these steps. It is not recommended to disable these settings on the computer. It's just to solve the problem.
Method 2: Check to see if this article helps you.
How to solve the scheduled tasks in Windows XP and Windows Server 2003
Method 3: We will grant permission for the C:\Users folder and check if it helps.
How to set, view, change, or remove special permissions for files and folders in Windows XP
If the computer is on a domain network you can post your query on the TechNet Forums.
-
Ball Msg: unable to connect to a windows service. Windows could not connect to the service user profile Service. The problem prevents limited users to logon to the system.
I was trying to deploy 1 Vista image on 4 laptops. I installed Vista Business (32 bit) on 1 laptop Dell Inspiron 1318. After I installed all my applications, I ran sysprep and has shutdown the laptop.
Then I used the Migration of Paragon Hard Disk Manager 2009 HDD utility make a clone of bit by bit of disk SATA (75GB) notebook #1. (Previous attempts to use ImageX has failed) After drive cloning, I inserted the clone into an another Laptop Inspiron 1318. The installation of Vista program began with the EULA and I created a new account user (an admin a/c).
When I tried to connect, I got the message: "the location is not available. C:\windows\system32\config\systemprofile\desktop is not accessible. Access is denied. "and the ball above message.
I researched and found info telling me to reset the ACL in my desktop connection folder and systemprofile desktop folder. I've done those, but they have not resolved my situation. Another post said to create a new admin account. I did it too, but it did not solve my problem.
I am unable to use any GUI interface after the half-login. I have to use the safe mode and the command line to get anything done.
Help, please.
Hi Phoogie,
Your computer is connected to a domain?
You can follow the steps mentioned in the link below
Error message when you log a computer Windows Vista-based or Windows 7 by using a temporary profile: "the user profile Service has no logon. Unable to load the user profile.
http://support.Microsoft.com/default.aspx/KB/947215
You can follow the steps provided by Zaki J, Microsoft support engineer dated from Monday, November 23, 2009 02:49 , see the link below for the steps:
Please post if you have any questions
Thank you, and in what concerns:
Ajay K
Microsoft Answers Support Engineer
Visit our Microsoft answers feedback Forum and let us know what you think.
-
Compatible Windows Vista backup the failed 0x80070005: access is denied
I am more able to backup my PC. It fails with a 0 x 80070005 (access) refused. I carefully watched the backup trying to glean what file fails when it tries to read it for the backup. It fails on a file on the C: drive, but it happens too fast. I can't determine the file name and THE EVENT LOG IS NOT THE NAME OF THE LOG FILE. I have no idea how to solve this problem. My last successful backup was dec 2010.
It would be a great start to save the file whose access is denied when the backup fails. then we can proceed.
Hi MickyLee3
You can check if the problem occurs in a clean boot state. You can check if no service interferes with the backup. To perform the clean boot follow step 1 mentioned in the article below, and then try again check in the clean boot state -
http://support.Microsoft.com/kb/929135
If the problem is resolved check which service non-Microsoft is the source of the problem; referring to article and following the other steps.
When you are finished troubleshooting, follow these steps to reset the computer to start as usual:
a. Click Start, type msconfig.exe in the start search box and press ENTER.
If you are prompted for an administrator password or for confirmation, type your password, or click on continue.b. on the general tab, click the Normal startup option and then click OK.
c. When you are prompted to restart the computer, click on restart.
I hope this helps.
Maybe you are looking for
-
How to format an external hard drive in el capitan
How to format an external hard drive in el capitan? I have a new iMac and bought a WD 2 TB hard drive. The manual says that I have to reformat the hard disk to use it with OS X. I opened the disk utility program, but there is no button to format the
-
I tried mthe ' internet options, privacy settings, etc., "and parameters to allow the appropriate cookies and this does not help.
-
Where are stored the updates of windows on the computer hard drive? This folder
I need to save the SP1 but I want to save in the same folder as the windows updates. I don't know where the updates are stored in Vista on my pc? The location search suggestions.
-
How to get the Windows Vista recovery disc
original title: I do not HAVE MY DVD/CD for MY WINDOWS VISTA RECOVERY. WHAT SHOULD I DO? I NEED TO RE-INSTALL MY PROGRAM, BECAUSE I FORGOT MY PASSWORD OF WINDOWS LOGON. PLEASE HELP__ NEED HELP TO PROGRAM RE-INSTALL WINDOWS VISTA. I FORGOT MY PASSWORD
-
I can't get my screensaver to work
original title: screen saver I can't get my screensaver to work... .He is running and all the setings are correct... can help you please... This is a new acer computer everything els works great.