Access storage and read/write USB

Similar Questions

• Diffrence between the tablespace is ONLINE and READ WRITE?

  Hi all

  I'm very confused on the tablespace is ONLINE and READ WRITE?

  Some say that if the tablespace is online, this means that its READ WRITE and when its offline then its READ-only.

  So, what is the difference between them:

  ALTER TABLESPACE offline tablespacename; -> done mean READ only now?

  ALTER TABLESPACE tablespacename online; -> is it means its READ WRITE now?

  If Yes, then what is the use of the following command if above 2 commands? :

  ALTER TABLESPACE tablespacename [READ ONLY |] READING WRITING];

  Kind regards

  Confused Ritu

  In addition, when the tablespace is offline, objects belonging to those who are not available for use to users. You wouldn't be able to query for objects in a tablespace offline.

  When the tablespace is read only - no write operation cannot be performed i.e. etc. INSERT/UPDATE/DEL. Oracle says that read-only tablespaces provides a way to protect the historical data so that users cannot modify it. You can drop objects, such as tables or indexes, to a tablespace read-only, but you can't create or modify objects in a tablespace read only

  In order to bring a tablespace OFFLINE to ONLINE - so that it is available to users, you must "ALTER TABLESPACE online tablespacename" command. A tablespace online can be READ ONLY or READ WRITE mode.

• Cannot access the card reader/writer internal Flash

  After a few updates, I can access is no longer any SD card inserted into the card reader/writer Flash. I tried to use the convenience store but just that said there is no problem found. When I insert the SD card, it appears in the 'control Panel\Hardware and Sound\Devices and printers' as ' Flash Card Reader/Writer "but I am not able to access the card.

  Hi Tim,.

  Was there a card player offered to you via Windows update driver update?

  -You see no drive letter assigned to the flash card while you see for readers in the window 'computer '?

  -What is the error you get when you go to the map?

  I suggest you try to change the drive letter assigned to the card and see if that helps.

  1 type diskmgmt.msc in the RUN prompt or in start search to open the computer management window.

  2. right click on the indicated card device and select "paths of access and change drive letter.

  3. click on change if there is an assigned drive letter, and then change to another letter. If this is not the case, click on add and select a drive letter.

  4 restart the computer so that the changes are applied and see if you are able to access the content in the map.

  For more information: http://windows.microsoft.com/en-in/windows7/change-add-or-remove-a-drive-letter

  Alternatively, you can try to uninstall and reinstall the drivers for the card and see if that makes a difference.

  Visit the website of your computer manufacturer to download and install the latest drivers.

  Let us know the results.

• storage and reading PDF on ios5.1.1

  Is there any application capable of pdf these days that will load on an original iPad updated his last possible ios5.1.1?

  I need to store locally on the iPad pdf files but also to read.

  At this late date and time, I'll State, probably, no.

  The original iPad is 6 years old and support ended for her in 2012.

  All PDF applications have continued to develop and many, if not all, dropped support and no longer keep older versions that may have once may have worked on an original iPad.

  I'm sorry.

• My system is running Windows XP SP3. The system crashed some time ago and I'm still trying to get the system to recognize and read/write CD and DVD units.

  I tried to change the numbers of the registry editor. He has worked for the CD, but not for the DVD. I also used the Microsoft Fixit but without success. Can you help me please.

  Hi KenBilodeau,

  See this:
  http://support.Microsoft.com/mats/cd_dvd_drive_problems/en-us
  http://support.Microsoft.com/kb/321641

• Driver: driver USB embroidery personalization VIP v6.2 system d/card reader/writer

  I use the system software embroidery personalization VIP v6.2 that I need a new driver for the card/d USB drive to run on windows 7.

  I was running the program under windows XP, everything seems to work fine on win7, I can't it the usb card to operate.  With a labour

  card reader/writer usb I can't transfer my designes for my Husqvarna Designer II sewing. The software company will not answer all

  one of my emails. All advice from someone sure would be useful.

  Thank you

  Hi JMiller,

  I imagine the inconvenience that you are experiencing. I'll certainly try and help you in the matter of fixing.

  To help you to propose measures to solve the problem, I would appreciate if you could answer the following questions:

  1. what happens when you try to use the card reader? You get the error message?

  2 are you able to use other USB devices without any problem?

  You can run the FIXIT and check if it helps.

  You can also update the drivers and check if that helps.

  Hope this helps and let us know if you need more assistance. We will be happy to help you.

• USB disabled not able to write and read access but user authorized to datacard possible

  Dear all,

  I need usb disabled unable to access both read & write. But able to access a Data card and USB mouse.  This is possible thanks to a block log. Please post your suggestion.

  Hello

  1. What is the exact problem you are facing with USB?

  2. you receive an error message?

  3. have you made changes on the computer before this problem?

  Please provide us with more information to help you further.

• Enter a share with read rights and have read/write rights

  I have a folder with my photos on my Mac. In this folder, I have all my photos in subfolders and will add new pictures once I created the share. I want to make them accessible to my family there own PC/Mac. But only with READ ONLY. My problem is that a user (account to share on my Mac) with reading rights can access my shared with read/write rights.

  I have my Mac with 10.11.2 the following users/groups:

  • (Jens) My Admin account
  • (Erika) Account sharing
  • (Family) A group

  Group of members of the family are:

  • Jens
  • Erika

  My folder permissions to "/ Volumes/ExtHD/Bilder" are:

  • Family: read
  • Jens: Read/write
  • everyone: read

  I enabled file sharing in the system settings and the 'Pictures' folder added to the share list.

  Now I go to another Mac with Yosemite, go to network in the Finder, select the computer with the share, connect to the "Erika" and open the folder "pictures". I can generate records or files, delete files, so I have read/write rights. Why?

  Finder don't show me no option 'Erika' should have rights to write to this folder. Why is she able to delete files?

  If get you information on the drive, it is the checkbox ignore verified property?

  What is the format of the disc?

• How can I read/write from/to a USB in LabVIEW

  I read through a number of tutorials and help information, but I can't seem to find a way to do it.

  I created a driver for LabVIEW to recognize the USB and I can find it using the 'VISA Interactive Control', but which is as far as I can get.

  How can I simply write a small file on the USB key and read the same file back? I'm just trying to make the verification tests.

  (via LV2009)

  Thank you

  I don't understand why you're messing around with VISA. When a USB drive is connected to a pc, normal windows driver will be appear as an extra disk and you can write and read it with the regular file IO functions. He has held several positions on the detection of the indicator of new road.

• The user read/write register access to the network folder/drive. Some users unable to save or write to the directories.

  I have three users who have no problem with read/write & record readers records secure network access. I have two users who can read some files and save in some files, but cannot save or access certain folders even after receiving full access read/write for all files in the network drive. Help, please. The computers running Vista Ultimate and server access to Windows Server 2003. Thanks for your times * address email is removed from the privacy *.

  Problems related to access to the files on a server networked in a business environment are a produce little for Windows answers Forum.  I recommend you repost the question either in the Technet Forum to the:http://social.technet.microsoft.com/Forums/en-us/winserverfiles/threads orhttp://social.technet.microsoft.com/Forums/en-us/itprovistanetworking/threads.

  I don't know that someone there can help you.

  Good luck!

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Create the table and take the name of user who can read/write on this table

  Dear gurus,
  
  I need to add the following column in Oracle 11g DB AND also add the name of user who can read/write ONLY the following table, any table to access the same read?
  
  I use to go to Oracle PL/SQL client.
  
  My dbname is 'customerdb '.
  
  TableName: "extractOrders."
  
  +: example of the field data.
  Column0 = logID: 1
  Column1 = idNumber: 39D13613-F061-D38D-100A-16536409C6D8
  Column2 = timestamp: 2011/07/11-13:45
  Column3 = resultCode: 40509
  Column4 = resultMessage: could not find the IDENTITY card
  Column 5 = number: 9813080808
  Column6 = iid: 87670200100001466100
  Column7 = products: D1430 | "' S1412 ' | "" S1407 | "' S2607 ' | "' S1417 ' | "" S1411 | "' S1413 ' | "" S1502 | "" S1406 | "' S1522 ' | "' S1524 ' | "' S1474 ' | "" S1473 ".

  user596669 wrote:

  I need to add the following column in Oracle 11g DB AND also add the name of user who can read/write ONLY the following table, any table to access the same read?

  I use to go to Oracle PL/SQL client.

  Let's say your table than extractorders is the schema of database clientsproperty.

  As this pattern create a stored procedure that runs with the privileges of the customerschema. Having this procedure return a ref cursor For example

  create or replace procedure ReadExtractOrders( c in out sys_refcursor ) authid definer is
  begin
    open c for select * from extractorders;
  end;
  

  As this code executes with the privileges of the customer schema it can read the table belonged to this scheme.

  Now give execute rights on this process for the Joe database schema - and this pattern can create a cursor on the table of ExtractOrders , without being able to access or use directly or refer to this table. Read access to this table is therefore protected by a reliable code belonged schema customers.

  Learn about the AUTHID clause and how it can be used to differentiate the code approved and non-approved, which allows to PL/SQL code to run with different privileges than the demand for prescriptions.

• Help? the source volume is read-write and can not be disassembled...

  I use 10.11.5 on an iMac 21.5 ", end of 2009 and I want to restore the OS X 10.11.5 to HD on an external drive but I get this message" Source volume is read = write and cannot be disassembled, so it cannot be copied from block. "  I can find answers do not address El Capitan.  Help would be greatly appreciated.

  .. .Goldie

  You use disk utility's restore feature?

  If the HD has a recovery partition, you can make starting in place of the recovery.

  Or you can use SuperDuper! (the basic version is free and can copy the entire disk, the paid version allows "smart updates", which copies only files that are different, saving time) running on externally to perform the copy.

• Write a question about basic series and Read.vi

  I tried to use the base series write and Read.vi to simulate the funtion of Hyperterminal, communication between the pc and the device via COM port. The question I have is, when I open the vi, under the name of resource VISA option, I don't think my device used COM port. I clicked on the button refresh, but always, always shows only COM1. And when I entered the hand COM7 (what I used) and click Run, it would show the error message: "invalid resource specified, Parsing error."

  Can someone help me with this problem? Thank you very much.

  Not a big fan of McAfee, but I do not know if it is charged. There is a KB article on how to solve this problem.

  Until address you and ports appear in MAX, you will not be able to use the ports in LabVIEW.

• How controls are grouped in the front pannel "write basic series and Read.vi.

  I wonder how the controls are grouped on the front. An example is the "basic series write and Read.vi. The rocker of Scripture and the 'rope to wirte' are grouped in a raised area. I couldn't move individual out of this box control when I tried to arrange the controls. How they are grouped and how do I move them individually?

  Thank you.

  

  Select the Group of controls you want to Group/Ungroup and select the option group/ungroup as shown above.no wonder in this

• Can't write series base and Read.vi to run

  Hello

  It is a strange problem because I used this .vi including several times before and never had a problem until I have created LabVIEW on my new laptop computer. I installed everything like I should without a problem, but for some reason when I try to run, I get the message:

  "Error-1073807343 is produced in property node (arg 1) visa set up a Serial Port (Instr) .vi-> basic series write and Read.vi.

  Possible reasons:

  VISA: (Hex 0xBFFF0011) insufficient location information or the device or resource is not present in the system. "

  I tried to find the error in the forums, but never, it corresponds to what I do and I can't find a solution. It is a problem serious because I'm on a timeline by hand in a project. Please notify.

  Thank you

  Yusif

  Stupid question - is the correct port selected for your new laptop? It's maybe something like com5 instead of com1. Do you see the port in Windows Device Manager?