access to documents and settings

Impossible to type 'documents and settings', even though I am 'owner' of the disk C and administrator. Access denied

First of all, I get a window telling me to push the button for continuous access and then I get a window saying that access was denied and the securety tab

"C:\Documents and Settings" is an alias for "C:\Users". You will have the usual access rights on this issue.

Tags: Windows

Similar Questions

  • Need to access the 'Documents and Settings' folder in Windows 7

    I am importing an ArcMAP GIS project to my new Windows 7 computer (the project was launched on Windows XP).  Because the files in this project were initially located in the subdirectories of the "Documents and Settings" folder, map search these files in this folder.  So, I need to access this folder if I put the files in the location that arcmap is expected to make them, or that I inform manually map the new location, one at a time, hundreds and hundreds of files.  Is there a way I can access the "Documents and Settings" folder to add new subdirectories and files in it?  After some research, I found the folder, but I said that I don't have authority (even as an administrator) to access and modify the content of the folder.  Thank you

    I am importing an ArcMAP GIS project to my new Windows 7 computer (the project was launched on Windows XP).  Because the files in this project were initially located in the subdirectories of the "Documents and Settings" folder, map search these files in this folder.  So, I need to access this folder if I put the files in the location that arcmap is expected to make them, or that I inform manually map the new location, one at a time, hundreds and hundreds of files.  Is there a way I can access the "Documents and Settings" folder to add new subdirectories and files in it?  After some research, I found the folder, but I said that I don't have authority (even as an administrator) to access and modify the content of the folder.  Thank you

    Hey ITromble

    read the below information about junction points even through it was written on vista

    http://www.Svrops.com/Svrops/articles/jpoints.htm

    Old path

    New path

    \Documents and Settings

    \Users

    Here is the vista forums

    link below is in Forum windows 7

    http://answers.Microsoft.com/en-us/Windows/default.aspx#tab=2

    Walter, the time zone traveller

  • access to documents and settings in windows 7

    I'm having a problem of password for download.  Download provider, HDTracks, advises as last resort to remove it is a temporary file in Documents and Settings.  My problem is with windows 7, I can't open this file with a message "access denied."  This is the first windows system, I used in which takes place this denial. No matter if this access will eliminate my problem, I want to know how I regain control of my system.  I am the administrator.

    "Documents and Settings" is not a file in the usual sense of the term - it is a junction point.

    Junction Points are just "pointers" - they are there only to allow software to use the new structure of file of Windows Vista/7.

    There are others.

    Here is a table of all the points of junction and the actual files they point out:

    C:\Documents and Settings - C:\Users\{user name} \Documents
    Application Data - C:\Users\{user name} \AppData\Roaming
    Cookies - name C:\Users\{user} \AppData\Roaming\Microsoft\Windows\Cookies
    History - name C:\Users\{user} \AppData\Local\Microsoft\Windows\History
    Locale - name C:\Users\{user} \AppData\Local
    NetHood - C:\Users\{user name} \AppData\Roaming\Microsoft\Windows\Network shortcuts
    Print neighborhood - C:\Users\{user name} \AppData\Roaming\Microsoft\Windows\Printer shortcuts
    {Recent - name C:\Users\{user} \AppData\Roaming\Microsoft\Windows\Recent
    SendTo - name C:\Users\{user} \AppData\Roaming\Microsoft\Windows\SendTo
    Start Menu - C:\Users\{user name} \AppData\Roaming\Microsoft\Windows\Start Menu
    Models - C:\Users\{user name} \AppData\Roaming
    Temporary Internet files - C:\Users\{user name} \AppData\Local\Microsoft\Windows\Temporary Internet Files

    There is nothing that you can use in these files, even if you access them, so there is no point in even trying.

    Here is more information about junction points:

    http://www.Svrops.com/Svrops/articles/jpoints.htm

  • How can I access the Documents and settings folder in Windows 7?

    Been searching the Internet for solutions, but found nothing.

    Documents and Settings is not a real issue, and it contains all of the files.  It's a point of junction : a hidden and protected operating system file that is present for compatibility with some older programs.  He points to the real user C:\Users folder. Boulder computer Maven
    Most Microsoft Valuable Professional

  • Why is access to Documents and settings denied?

    When I try to opne Documents and setting I get an error box that says access denied. I am the only user and I am registered as an administrator. There is a little lock icon file name. What is and how to remove?

    It's just programs them to fool the bad that he search by name.  Many bad programs were written to try to find this folder by name, and these programs break if they can't find it.

    Not quite true - Windows folder structure has been redesigned in Vista/7 and these junction points are there mainly to allow programs that were written for XP to use the new Vista/7 folder structure. Not much to do with the bad programs, just legacy programs

    (The fact that many programs written for XP does not WORK on Vista/7, is a different story!)

  • Refuse access to documents and settings to Windows 7 Administrator

    Full installation of Windows 7 from MS was purchased in 2010 (now beyond the time of MS support) on a brand new computer. User account unique (me) with full administrator rights and access (so I thought). Last week for the 1st time, I had access to the Documents & settings. Surprise! Folder is locked and denies me access, no matter what I do with all the settings. "You don't have access to this folder", and he denies me, the administrator, the rights to make the changes.  Since I was a year + applications and files installed on this thing, I shudder to anticipate a reinstallation of the system address. Any ideas on how to unlock this file?  There may be others that I don't have reason to still access, but it's one important right now.  NOTE: I'm an experienced user, but NOT a geek, so a large part of the jargon 'inside baseball' is over my head, but I'm uncomfortable procedures, even in the registry (very clear instructions please). I'd appreciate any help that anyone is kind enough to offer.

    In Windows 7, "Documents & settings" are not a real folder but a point of redirection for poorly designed applications.

    Your files are in C:\Users\YourUserName\

  • In XP, error C:\Documents and Settings\All Users access refused

    Windows keeps comeing to C:\Documents and Settings\All Users\Menu Menu access denied

    How can I solve this problem

    Hi Tony,.

    Are you running Vista/7? If so, read below.

    Please see the link on here for the short solution.

    Hope this helps to get a better understanding of the structure of folders in the newer versions of Windows.

  • Cannot run Aerotow, message error "access denied, needs access to the FSX.cfg file in My Documents and Settings folder'.

    Original title: I need assistance with My Documents and Settings folder

    I have Windows XP, Norton Internet security.

    OK, so I have FSX. I'm having a little program called "Aerotow. To run, you must Access the FSX.cfg file in My Documents and Settings folder.
    But access to this file is denied.
    The most funny thing is - I can access the folder without problem. Open it and sail away. But my system seems to have blocked Aerotow.exe and configure.exe to access this folder. It's VERY frustrating. How can I access this folder? Why the program is blocked?
    Thank you.

    Hello

    I suggest you to contact the developer of the application for assistance.

  • Deliver the profile of the user - My Documents folder moved to C:\Documents and Settings\TEMP. I can't view or access this folder to copy My Documents back. Help?

    XP Home SP3 on my laptop (no not in network - independent).

    After an Adobe Reader 10 X installed, there is a reboot, and when I logged in the profile that appeared was not mine - it was as if it was a new installation. I looked for my personal documents under My Documents and did not find them. So, I looked for them on the C: drive, found (no not noted where), and copied My Documents to what seemed like the name /my Documents /. After that, I could access my documents by clicking Start-My Documents online. I did another reboot. Now, after login, my old profile is displayed, and the My Documents folder is empty except for the value by default my pictures, my music, my videos, and favorite - and these are all basically empty.

    I then ran a program Search and Recover to find my documents - they were found under C:\Documents and Settings\TEMP\. Unfortunately, I can't seem to see that to explore (I have it configured to display the hidden files and folders). Is it possible to go to this folder and the moving my Documents back to my profile?

    Thank you

    Ananth

    Hello

    You can view these methods:

    Method 1:

    Check to see if the problem exists in Safe Mode, if the computer works as expected in mode without failure, then we can solve the problem in the clean boot state.
    a. refer to the article below for the procedure safe mode in Windows XP
    A description of the options to start in Windows XP Mode
    http://support.Microsoft.com/kb/315222

    b. it is a possibility that there is a startup program that is launched with a command line and it appears.
    You need to perform a clean boot to find the program that is causing and then disable or remove.
    How to configure Windows XP to start in a "clean boot" State
    http://support.Microsoft.com/kb/310353/en-us
    Note: When you are finished troubleshooting, follow the steps as explained in the article to reset the computer to start as usual.

    Method 2:

    System Restore takes a "snapshot" of critical system files and some program files and the registry settings and stores this information as restore points. If your computer is not working properly, you can use these points to return Windows XP to a previous state when your computer was working properly restore. It can also change scripts, batch files, and other types of executable files on your computer.

    How to restore Windows XP to a previous state

    http://support.Microsoft.com/kb/306084

    I hope this helps.

  • In XP, the C:\Documents and Settings\All Users\Menu Menu access denied error

    Windows is comeing up C:\Documents and Settings\All Users\Menu Menu access is denied

    How can I solve this problem

    Hi Tony,.

    a. is the narrow question in the folder of the Start Menu ?

    b. you are the administrator of the computer?

    Check to see if this article helps you.

    "Access denied" error message when you try to open a folder

  • "Access denied" error message when you try to open documents and settings

    in Vista, will explore and clicking on settings and Documenets that I get an error access is denied

    Hello montangriz,
    Documents and Settings is a junction and inaccessible.
    C:\Documents and Settings\ now is C:\Users\

    Lisa
    Microsoft Answers Support Engineer
    Visit our Microsoft answers feedback Forum and let us know what you think.

  • Access denied to my "Documents and Settings" folder

    I am running Vista Home Premium w/SP 1 is installed on a 64-bit system.

    I tried everyting to correct the line 'access denied' when never try to open the D & S folder.  Regardless of what happened, how do I do?  I checked my profile and have all THE permissions granted.

    "Documents and Settings" is a junction Point; no access.

    http://www.Svrops.com/Svrops/articles/jpoints.htm

    Old path

    New path

    \Documents and Settings

    \Users

    \Documents and Settings\Default User or
    %LogonServer%\NETLOGON\Default user

    \USERS\DEFAULT or
    %LogonServer%\NETLOGON\Default

    \Documents and Settings\\My Documents

    \Users\\Documents

    \Documents and Settings\\My Documents\My photos

    \Users\\Pictures

    \Documents and Settings\\My Documents\My Music

    \Users\\Music

    See you soon.

    Mick Murphy - Microsoft partner

  • Access denied on a "documents and settings" folder in windows 7 with administrator rights

    I get access denied on the ' c: \documents and settings "in windows 7 with administrator rights.  The icon shows a small lock on the (very cute) folder. Permissions indicate full control to the folder. I can only access the contents of the folder by adding it to the library folder. The computer is fairly recent and is very near of the original factory. Unlike my precious computers I left it mostly original except for the odd new program. I never really noticed when it pops up as I was getting used to format windows 7 and thought that it must be "the new way" to 7 " The disk has been partitioned by Asus, which significantly added to the confusion. Now I think that it why documents and settings would be in the same folder anyway?  What is a level administrator uber folder? Any ideas greatly appreciated.

    "Documents and Settings" are not a folder - it's a junction Point.

    It is there to allow legacy applications using the latest Windows 7 folder structure.

    There is nothing in what you can use.

    See here for more information about Junction Points:

    http://www.Svrops.com/Svrops/articles/jpoints.htm

    It would have been clear if you looked at the Related Posts - that's what they are there for...

  • Why don't I have access to the files in the documents and settings, etc.. How can I change this?

    Original title: Documents & Settings

    I am the administrator of my new computers.  I just upgraded from XP to Windows 7.  Why don't I have access to all parts of my computer?  i.e. folders in documents and settings, etc.  How can I change this?

    I am the administrator of my new computers.  I just upgraded from XP to Windows 7.  Why don't I have access to all parts of my computer?  i.e. folders in documents and settings, etc.  How can I change this?

    Hello

    Since Windows XP, in the last several versions of Windows, there are many changes for the names and locations of some Windows system folders .

    To ensure compatibility with older programs, these older cases have been replaced by The junction Points. A junction Point is designed to redirect programs more alumni who are hard coded to look for the former name of folder for the new file name and the location in Windows.

    An example is the C:\Documents and Settings folder. The new name and the location of this folder is C:\Users. In Windows 8, you will see a folder C:\Documents and Settings , but it should be noted that this record contains a shortcut arrow on the folder icon. He identifies it as a junction.

    Junction points all than its guarantee of value everyone = access denied.

    Note: Do not attempt to modify the security settings on a junction. This can cause programs to stop work and possibly corrupt the file system.

    Let us know if you have any other questions.

    Concerning

  • c:\Documents and settings is not accessible. Access is denied

    Even if my user account appears under my being the administrator, it is still not allow me access to my documents and settings files.  It is said to "c:\documents and settings is not accessible. Access is denied. "When I came to my computer, I know I opened at least two accounts, both with full administrator access, and yet the account opens is called"Judy"which is my name and at the same time, I'm sure to set up he asked me who has computer it was, so I wrote my name, but when I connect to my computer the account that opens is called"Judy"that even if I never named an account, it is still the only account he allows me to open. When I go to the command prompt to change user names, the screen goes black, and this same account "Judy" appears towards the top and asks for my password.  Simply, it will not show two accounts that I actually put in place.  I followed the instructions from the answer to someone else who has had a similar problem and he showed how you can determine if the account you are using is a standard or administrative account.  I did what told him to do and he came that Judy was indeed an administrator account. I was also able to show the names of all accounts on this computer and stood in the two accounts I made, of which none were called Judy, so I know that these accounts are in there, somewhere and why they are not listed when I ask to change user accounts is a mystery to me.  I've been going around in circles with this.  Everybody out there familiar with this kind of madness?  Any help is appreciated.

    Documents and Settings is not a real file in Windows 7. It is a junction which is configured to allow existing programs to interface with the Windows 7 folder structure.

    Instead, Windows 7 uses these files:

    C:\Users\*your User Name * \My Documents

    and

    Username C:\Users\*Your * \Appdata

    (appdata is a hidden folder)

    Look in C:\Users to see which accounts exist.

    Also you can access the control panel > user accounts to edit.

Maybe you are looking for

  • Apple support in IOS 10 cards

    How to show you a path between two locations when none of them are your current location?

  • What MacBook for CAD?

    Hi people, I'm looking for any MacBook for my engineering studies. Therefore, it is necessary to use software of CAD on the Macbook (3D modeling) - unfortunately I do not know what kind of MacBook, I will use (buy); Can you please give me some advice

  • How to wipe & restore PH3100U-1EXB to factory default configured using Vista?

    The partition was accidentally deleted during Vista re - install on the laptop, now the partion of virtual cd is not readable. :( There is no critical data on this drive.

  • How to build an application to queue?

    I want to apply for the queue using labview. If I have a list of data, for example 100,200,300,400,500,600 and 700 stored on table or matrix, and then using a queue function it process the data one by one after each other. How I do that? I'm using la

  • E2000 brick? Blinking light question

    My E2000 worked without a single problem until I moved. Then I went to plug set up again once and his exploded. I tried a 30/30/30 reset, but it does not work, sometimes the power light stays on with a contraction of flicker or it will blink just qui