access to documents loaded with loadMovie()

Similar Questions

• incompatible loading with loadmovie, whats a trick to this?

  loadMovie (imagePath, "loadImage");
  
  the value of the imagePath value dynamically an image on the server based on the interaction of users.
  loadImage is a clip of blank film sitting on this timeline that receives the loadMovie command.
  
  an image after the loadMovie command I put the width and height. four frames after that I have a stop();
  
  the user makes a number of things, and the timeline that contains the loadmovie reruns itself using the new imagePath to pull in a new movie. It has a 25% failure rate when it starts first. Even if im charging the same image, or if I have folding back and forth between loading different images, possibly an image does not load and more, and then the other image used or the other and finally none of the images load. If I shut the whole thing down and start it again, im good to go again for a few times but then finally nothing loads again. Maybe theres a problem syncing here. Anyone who deals with this before and know what are the General rules for this type of installation to work with loadMovie?
  
  
  
  

  Yep, that's the answer. Work a lot better now and I can follow when it finishes to load now. Thank you!

• Funds loaded with LoadMovie sovereigns are really big?

  I have the following action in "frame.swf" on frame 1:
  
  loadMovie ("home.swf", "DisplayArea");
  
  My "home.swf" is exactly 730 x 400, but during the loading in frame.swf, it is much more. Is any way to set the size of the loaded .swf?

  Yup - just as suspect - your clip is resized - select it with your transformation Panel open - you'll
  See is climbed more than 140 percent.

  ******************************************
  --> * Adobe Certified Expert *.
  --> www.mudbubble.com
  --> www.keyframer.com

  alexfierro wrote:
  > I do not see where to change the percentage of scaling. DisplayArea is just an empty clip.
  >
  > Files can be found here:
  > http://www.alexfierro.com/OT/loadmovie.zip (38 KB)
  >
  > Please help!

• Get the error message "error loading DLL communication" when trying to access Wireless Utility Setup with a LexMark impact S305 printer

  Original title: trying to access Wireless Utility Setup with a printer LexMark impact S305 on windows 7, can nybody help me?

  lxeapss: error loading DLL communication, I get this pop-up box several times trying to access Wireless Utility Setup with printer. I have tried, defrag, virus scan (vipre), stop, went to the Lexmark Web site to get the latest software downlaod for printer?

  Hello

  Click on the link below.

  http://support.Lexmark.com/index?page=content&ID=so4452&locale=en&UserLocale=en_US

  Hope this information helps.

• I am trying to access my documents and I get a pop up saying "windows explore has stopped working".

  Original title: "windows Explorer does not work.

  I try to access my documents and I get a pop saying "Windows Explorer has stopped working", he spends next to her saying "windowse Explorer restarts" the box with all the options of my document is then stopped. I tried accessin while market and stop the internet, and it makes no difference.

  What should I do

  Hello

  Use the startup clean and other methods to try to determine the cause of and eliminate
  the questions.

  ---------------------------------------------------------------

  What antivirus/antispyware/security products do you have on the machine? Be one you have NEVER
  on this machine, including those you have uninstalled (they leave leftovers behind which can cause
  strange problems).

  ----------------------------------------------------

  Follow these steps:

  Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN

  Enter this at the command prompt - sfc/scannow

  How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
  generates in Windows Vista cbs.log
  http://support.Microsoft.com/kb/928228

  Also run CheckDisk, so we cannot exclude as much as possible of the corruption.

  How to run the check disk at startup in Vista
  http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

  ==========================================

  After the foregoing:

  How to troubleshoot a problem by performing a clean boot in Windows Vista
  http://support.Microsoft.com/kb/929135
  How to troubleshoot performance issues in Windows Vista
  http://support.Microsoft.com/kb/950685

  Optimize the performance of Microsoft Windows Vista
  http://support.Microsoft.com/kb/959062
  To see everything that is in charge of startup - wait a few minutes with nothing to do - then right-click
  Taskbar - the Task Manager process - take a look at stored by - Services - this is a quick way
  reference (if you have a small box at the bottom left - show for all users, then check that).

  How to check and change Vista startup programs
  http://www.Vistax64.com/tutorials/79612-startup-programs-enable-disable.html

  A quick check to see that load method 2 is - using MSCONFIG then put a list of
  those here.
  --------------------------------------------------------------------

  Tools that should help you:

  Process Explorer - free - find out which files, key of registry and other objects processes have opened.
  What DLLs they have loaded and more. This exceptionally effective utility will show you even who has
  each process.
  http://TechNet.Microsoft.com/en-us/Sysinternals/bb896653.aspx

  Autoruns - free - see what programs are configured to start automatically when you start your system
  and you log in. Autoruns also shows you the full list of registry and file locations where applications can
  Configure auto-start settings.
  http://TechNet.Microsoft.com/en-us/sysinternals/bb963902.aspx
  Process Monitor - Free - monitor the system files, registry, process, thread and DLL real-time activity.
  http://TechNet.Microsoft.com/en-us/Sysinternals/bb896645.aspx

  There are many excellent free tools from Sysinternals
  http://TechNet.Microsoft.com/en-us/Sysinternals/default.aspx

  -Free - WhatsInStartUP this utility displays the list of all applications that are loaded automatically
  When Windows starts. For each request, the following information is displayed: Type of startup (registry/Startup folder), Command - Line String, the product name, Version of the file, the name of the company;
  Location in the registry or the file system and more. It allows you to easily disable or remove unwanted
  a program that runs in your Windows startup.
  http://www.NirSoft.NET/utils/what_run_in_startup.html

  There are many excellent free tools to NirSoft
  http://www.NirSoft.NET/utils/index.html

  Window Watcher - free - do you know what is running on your computer? Maybe not. The window
  Watcher says it all, reporting of any window created by running programs, if the window
  is visible or not.
  http://www.KarenWare.com/PowerTools/ptwinwatch.asp

  Many excellent free tools and an excellent newsletter at Karenware
  http://www.KarenWare.com/

  ===========================================

  Vista and Windows 7 updated drivers love then here's how update the most important.

  This is my generic how updates of appropriate driver:

  This utility, it is easy see which versions are loaded:

  -Free - DriverView utility displays the list of all device drivers currently loaded on your system.
  For each driver in the list, additional useful information is displayed: load address of the driver,
  Description, version, product name, company that created the driver and more.
  http://www.NirSoft.NET/utils/DriverView.html

  For drivers, visit manufacturer of emergency system and of the manufacturer of the device that are the most common.
  Control Panel - device - Graphics Manager - note the brand and complete model
  your video card - double - tab of the driver - write version information. Now, click on update
  Driver (this can do nothing as MS is far behind the certification of drivers) - then right-click.
  Uninstall - REBOOT it will refresh the driver stack.

  Repeat this for network - card (NIC), Wifi network, sound, mouse, and keyboard if 3rd party
  with their own software and drivers and all other main drivers that you have.

  Now in the system manufacturer (Dell, HP, Toshiba as examples) site (in a restaurant), peripheral
  Site of the manufacturer (Realtek, Intel, Nvidia, ATI, for example) and get their latest versions. (Look for
  BIOS, Chipset and software updates on the site of the manufacturer of the system here.)

  Download - SAVE - go to where you put them - right click - RUN AD ADMIN - REBOOT after
  each installation.

  Always check in the Device Manager - drivers tab to be sure the version you actually install
  presents itself. This is because some restore drivers before the most recent is installed (sound card drivers
  in particular that) so to install a driver - reboot - check that it is installed and repeat as
  necessary.

  Repeat to the manufacturers - BTW in the DO NOT RUN THEIR SCANNER device - check
  manually by model.

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  How to install a device driver in Vista Device Manager
  http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.html

  If you update the drivers manually, then it's a good idea to disable the facilities of driver under Windows
  Updates, that leaves about Windows updates but it will not install the drivers that will be generally
  older and cause problems. If updates offers a new driver and then HIDE it (right click on it), then
  get new manually if you wish.

  How to disable automatic driver Installation in Windows Vista - drivers
  http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
  http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx

  ===========================================

  Refer to these discussions because many more excellent advice however don't forget to check your antivirus
  programs, the main drivers and BIOS update and also solve the problems with the cleanboot method
  first.

  Problems with the overall speed of the system and performance
  http://support.Microsoft.com/GP/slow_windows_performance/en-us

  Performance and Maintenance Tips
  http://social.answers.Microsoft.com/forums/en-us/w7performance/thread/19e5d6c3-BF07-49ac-a2fa-6718c988f125

  Explorer Windows stopped working
  http://social.answers.Microsoft.com/forums/en-us/w7performance/thread/6ab02526-5071-4DCC-895F-d90202bad8b3

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">

• iPhone 5s stuck on the loading with the apple logo bar

  my iphone 5 s is currently blocked on the loading with the apple logo bar, my home button does not work (I normally use assisstive-touch), ive tried connecting my phone to a laptop and then connect to itunes, but when I connect to itunes it say «to allow access, answer on your iphone» I don't know what to do and need my phone. Help, please.

  You must get the repaired Home button in order to connect to iTunes to sync or restore data.

  Help here > repair - official Apple iPhone Support

• "document loaded.

  Printer. Color LaserJet Pro CM1415fn MFP

  The screen mini printer displays message "document loaded.

  What I do with it and how do I clear the screen

  Hi @Jambomama ,

  I see that you are having problems with the display showing 'document loaded. I will do my best to help you.

  Usually when the display shows this message for the loaded document, there is a piece of paper into the automatic document feeder. If you have a paper there, remove it. There is a small piece of black plastic that glue up when the paper is loaded it moves to indicate that a document is loaded in the ADF. Check that it is not broken piece ora paper jam in the ADF.

  I have provided a picture to give you an idea about where to look inside the ADF.

  

  You may need to do a hard reset.
  Let the printer and disconnect the printer cable and the wall socket for 60 seconds.
  Reconnect the power cable to the output of the printer and the wall, and not a surge protector.
  This ensures that the printer is full on and can help this situation.

  What operating system do you use? How to find the Windows Edition and the Version on your computer.

  How is the printer connected? (USB, Ethernet, WiFi)

  If you need help, let me know.

  Good day!
  Thank you.

• user account - main 'administrator' acct has disappeared and I can't access my documents 'admin '.

  main account under XP pro since always 'administrator' put in place a new Admin account in Control Panel with the intention of transferring files in it, because I could not rename the original

  no other action - now since a restarted a few days later the Admin log you / account has disappeared and when I try to access the documents 'administrators' to the new user account with administrator privileges I get a message 'not available' - I NEED these files because they contain files of accounting for our local charity and supported last a disk separate until 3 weeks ago GULP!

  Hi Michaelthetruck,

  Follow the suggestions below for a possible solution:

  Method 1: I suggest you try the steps in the Microsoft Knowledge Base article and check.

  "Access denied" error message when you try to open a folder

  http://support.Microsoft.com/kb/810881

   

  Method 2: You can also take the owner of the file/folder, to steps, consult the following article:

   

  How to capture a file or a folder in Windows XP

  http://support.Microsoft.com/kb/308421

  Let us know if that helps.

• Trying to access My Documents or my computer files

  When you try to access My Documents or my computer, I get an error message saying:
  C:\Windows\Explorer.exe not found.
  I ran two programs of different virus scan in safe mode with nothing found yet.
  What is the solution?

  Hello

  · Have you tried accessing the files in safe mode?

  Run the checker system files on the computer. Link, we can see: Description of Windows XP and Windows Server 2003 System File Checker (Sfc.exe): http://support.microsoft.com/kb/310747

  Note that: if he asks you the service pack CD, follow these steps from the link: you are prompted to insert a Windows XP SP2 CD when you try to run the tool on a Windows XP SP2 computer system File Checker: http://support.microsoft.com/kb/900910 (valid for Service pack 3)

• HP LaserJet Pro M127fn MFP: Automatic document feeder does not detect documents loaded on it

  Hello

  I use all of this in one previous machine a few months. Since the last two weeks than its automatic document feeder is not detect documents loaded on it, while it is perfectly flat scanner scanning and printing as well. This machine is connected via a usb cable. I tried all the troubleshooting options available including resetting the printer, cleaning ADF etc etc sensors I also tried the update the bios of the printer, but it does not work for me and feeder is constantly unable to detect documents loaded on it. I searched the whole forum but did not find any message an answer fast and good, therefore, will be highly appreciated in this regard. Thank you

  Hey @Mohsan_IT,

  Welcome to the Forums of HP Support!

  I would like to help you today to address the issue of automatic documents feeder sensor you encounter on your HP LaserJet Pro MFP M127fn. Please include all the troubleshooting steps that you received before you reach out for support. Right now, you have completed all the troubleshooting steps supported in your efforts to solve this problem. If you want to confirm that everything was done correctly, please see the following two positions:

  • Can not copy or scan of FDA (autofeed) on LaserJet 127fn MFP
  • ADF works does not in all new Pro LaserJet MFP M127-M128

  All steps in the discussions that I provided above must be made without success, then the last step would be to perform the programming reset NVRAM on your printer. Now I will send you a private Message with instructions on how to reset the NVRAM. Please check your private Messages for instructions.

  Good luck!

• When you try to access the Documents, computer or control panel, Windows Explorer says reboot

  When I try to access my documents, computer, etc. in the start menu, control panel I get the message window Explorer it restarts attempts to restart, but when I try again, it does the same thing. Hope that there is a simple solution to this problem. I can get the internet without problem.

  * original title - Windows Vista startup *.

  Hi Florence.

  The following thread seems to be a similar problem. Take a look at the troubleshooting inside and see if it helps with your problem:
  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-performance/error-Windows-Explorer-has-stopped-working-when/1d1b60d1-9587-466C-A427-511c5691af2a
  I hope this helps.

• Document Sync with Local cloud

  Hello!

  How can I synchronize the documents stored on the cloud with my local ipad?

  IM wishing to access these documents without internet

  THX!

  Hello

  Currently, Acrobat Reader for iOS did not provide UI (a button or menu item) to download documents PDF of Adobe Document cloud at Local level on your iPad/iPhone.

  Here are some workarounds for the absence of the feature.

  (a) to download a document of clouds using Safari

  1. Open Safari on your iPad/iPhone.
  2. Go to Acrobat Document cloud (https://cloud.acrobat.com/).
  3. Sign in with your Adobe ID
  4. Select the PDF document you want to download on your iPad/iPhone.
  5. Click on download.  This will cause the PDF to open in Safari.
  6. Tap anywhere in the PDF document to display the toolbar secondary.
  7. Tap on "open in...» ».
  8. Tap on the Acrobat icon to open the PDF document in Acrobat Reader for iOS.

  (b) send a document of cloud to yourself using E-mail

  1. In Acrobat Reader for iOS, open the PDF document that you want to store locally on your iPad/iPhone.
  2. Tap the share icon.
     
  3. Select the shared file.
  4. Select 'Original Document to share' in the shared file dialog box.
  5. Press Messaging.
  6. Send e-mail to yourself.
  7. In Apple Mail, open an email with the PDF attachment on your iPad/iPhone.
  8. Tap the share icon.
  9. Tap on the Acrobat icon to open the PDF document in Acrobat Reader for iOS.

  Once the PDF document is open in Acrobat Reader for iOS, it appears in the local section of the file Explorer.

  Please note that you will have two PDF documents with the same file name. That is stored locally on your iPad/iPhone, while it is stored in the Document cloud.

  Please let us know if you have any additional questions.

• Got "the page you are trying to access is not valid." When trying to access the document

  We have an EchoSign document already sent to the clouds to Adobe via API v20, after successful sending that get the URL to access the document. And in our application that is a cluster with two application servers, say a server and Server B and send the document to Adobe via the server. Now, when you try to open the URL of the document from Server A, it is well; but when you try to open the URL of the server B, it reports that "the page you are trying to access is not valid.". Any idea on this? For Server A and Server B, the URL is the same, is not why this happens.

  Hello Usman,

  We have already solved the problem. That's the problem on our side. :-)

  Thank you

  Qing

• I bought the creative cloud for students and cannot access the document cloud.

  Hello.  I bought the creative cloud for students and cannot access the document cloud.  I thought that it was part of the overall agreement, but it just says my trial has expired and does not allow me to do something.  My payments were made.  The only reason why I

  Your subscription to cloud shows correctly on your account page?

  If you have more than one email, you will be sure that you use the right Adobe ID?

  https://www.adobe.com/account.html for subscriptions on your page from Adobe

  If Yes

  Some general information for a subscription of cloud

  Cloud programs don't use serial... numbers you, connect you to your cloud account paying to download & install & activate... you may need to sign out of the cloud and restart your computer and log into the cloud for things to work

  Sign out of your account of cloud... Restart your computer... Connect to your paid account of cloud

  -Connect using http://helpx.adobe.com/x-productkb/policy-pricing/account-password-sign-faq.html

  -http://helpx.adobe.com/creative-cloud/kb/sign-in-out-creative-cloud-desktop-app.html

  -http://helpx.adobe.com/x-productkb/policy-pricing/activation-network-issues.html

  -http://helpx.adobe.com/creative-suite/kb/trial--1-launch.html

  -ID help https://helpx.adobe.com/contact.html?step=ZNA_id-signing_stillNeedHelp

  -http://helpx.adobe.com/creative-cloud/kb/license-this-software.html

  If no

  This is an open forum, Adobe support... you need Adobe personnel to help

  Adobe contact information - http://helpx.adobe.com/contact.html

  -Select your product and what you need help with

  -Click on the blue box "still need help? Contact us. "

• PeopleSoft framework 8,53 test - failed to access HTML document error

  I am a total newbie to PTF recording my first test. I have the framework running and am able to connect to the database. I'm recording my first test.
  
  From closed IE, I open the test recorder and click the 'House '. IE opens to my login page.
  
  I click on the record button and get a dialogue with "could not access HTML Document, please check your browser settings.
  
  I also tried to open a Peoplesoft session in the browser before you click on the folder with the same results.
  
  I use IE 9 on Windows 7. I tried to follow the Peoplebooks "Configure browser security settings" in "installing a PTF customer." However Internet - Security tab Options is not visible by me (IE version?, security locked?) so I can't add my domain name for the intranet zone security settings. What is the cause of my problem? (I have no problem accessing the site of Peoplesoft otherwise.)
  
  Any help is appreciated
  Dan

  You run everything "as Administrator"? If so, try running "regsvr32 Shdocvw.dll" at a command prompt and then try again. If this does not work, we take a deeper look. I also saw someone say activating protected mode, the same error correction for them, but if your security tab is grayed out, you can probably change this. For reference, the browser that I use for the TFP has not protected mode is enabled. Another thought, have you turned on "generate HTML for Testing" in the Web profile your currently using?