Access to the network in the Explorer

Similar Questions

• PDF files accessed through the Explorer freeze

  Using Window 7 and Acrobat X Pro.  Have had this problem for some time.  If the PDFs are open short Adobe cut files work fine and can be moved to different screens.  However, if the files are opened through the Explorer 80% of the time they open and missing the top of the header, is unable to move the file or drag to another screen.  Need to minimize and bring back several times before it corrects itself (now, it does not correct itself).  Have to spend a lot of time to open the main shortcut files.

  I ran the updates, repairs etc with no luck.  All of the suggestions.

  BZ

  Hi wmz96531208,

  Install the drive using this link Adobe - Adobe Acrobat Reader DC Distribution, then check if it makes a difference.

  Kind regards

  Nicos

• "NMH410 do not have access via the Explorer: name of local device already in use.

  I can't connect with my NMH410 through Explorer. It worked fine, but I must have done something wrong. Device name Local message already in use keeps popping up, even after the removal of the former as links indicated elsewhere. I changed the name of the device backward (which may be where it started). Also devices that were not previously connected Gets the same response. I tried on XP and Vista. I have also a router Linksys (WRT610N) that had me install Home Network Defender. It was a pain to get rid of it and I would not be surprised if this is part of the problem.

  I'm running out of options. I would consider same formatting for all start over, but prefer not because I have to get all my MP3 somewhere somehow... Help, please.

  Bart

  Hi bartled,

  I suggest you try to do a hard reset on your NMH410. To do a reset, while the device in operation - press the reset for 10 seconds-, and then unplug the cable (keep pressing the reset button) - wait 10 seconds - reconnect the power cable (by pressing the reset button) - wait 10 seconds before you release the reset button. Once the lights are solid, check out the "friendly name" of your NMH410 via the LCD screen. It should be to the default name "Mediahub. Try to use 'Mediahub' on your browser and check if you can access the user interface of your device.

  See you soon!

• Can no longer access network drive with the Explorer of Windows 7 Pro

  Up to what a week ago it worked fine.  After a weekend of not to use the computer, I noticed that my Synology and WD network drives were not under network in Explorer.  I tried to enter the IP address in the address \\10.0.1.36 bar and it says windows cannot access
  It is visible and accessible from my other computers.  There must be some setting that inadvertently changed, but I can't.  It's all in the same workgroup.

  I can access the drive via the web browser and the software of the player.

  Any suggestions?

  Hello

  Thanks for choosing Windows and thank you for providing an opportunity to help you.

  According to the description provided, you have problems with access to the network drive.

  Method 1: perform the steps described here below and see if it helps.

  a: Click on Start->Control Panel. Double-click on network and sharing Center.
  b: In the left pane, click "change advanced sharing settings.
  c: Make sure that "discover the network" is turned on.

  Method 2: temporarily disable the Windows Firewall and check.

  Turn Windows Firewall on or off (Windows 7)

  Warning: Firewall software can help protect your computer against viruses and other security threats. In most cases, you should not disable your firewall software. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your firewall software is disabled, your computer is vulnerable to attacks.

  Answer to us if you have problems with access to the road or any other issue of Windows, and we would be happy to help you.

  Good day!

  Hope this information helps.

• Adapter LAN question, "no access to the network.

  Original title: LAN adapter issue

  Hi all, when connecting my laptop to a switch of the LED on the switch is green which means connected. The IP address on the laptop is entered manually, but when will the cmd and issue ipconfig it shows "media disconnected" and the network adapter in the Control Panel indicates "no access to the network. It also indicates that "this device is working propoerly! Please advice

  Hello

  What is the number and the model of the computer?

  Remember to make changes to the computer before the show?

  Thanks for posting in Microsoft Communities.  The problem description, I understand that you can not connect to the Internet.  Correct me I misunderstood the question

  Follow these steps:

  Method 1: Follow these steps:
  How to troubleshoot possible causes of Internet connection problems in Windows XP: http://support.microsoft.com/kb/314095

   

  Method 2: Follow these steps:

  
  Step 1: renew DHCP Dynamic Host Configuration Protocol)
  a. click Start, click run, type cmd and click OK.
  b. in the command prompt, type ipconfig / renew
  c. Close command prompt.
  d. check the result.

   

  Step 2: Try to obtain an IP address automatically
  a. open Internet Explorer, go to Tools, click on Internet Options, connections, LAN settings.

  b. uncheck all boxes except automatically detect connection settings
  c. click OK to apply the changes.
  d. check if the problem persists.

   

  Method 3: If the methods above do not help, check if the wireless card is very well and try to update the drivers on the manufacturer's Web site.

  a. click Start and right-click my computer.
  b. Select Properties and then click the hardware tab.
  c. click on Device Manager and expand network adapters in the list.
  d. right click on the adapter, then click Properties.
  e. click the driver tab and click Update the driver.

  Please follow the steps and let us know if this helped.  If the problem persists, answer and we will be happy to help you.

• EA4500, network drive doesn't work without access to the secure folder

  The map I try the USB hard drive connected to my EA4500 router as a network drive in Windows 7 and it works perfectly until I have enable access to files on the router.

  After enabling file access secure and do not change other settings of the router I first disassemble the drive because it has been implemented without credentials and does that any more.  When I try to remap the drive I use the same address, but select 'Connect using different credentials' when he invites me to the log in info I try to use the router administrator account, but it fails to connect.   Diagnostics Windows network tells me that the device has refused the connection.  I have to create an account on the router in the settings of folder with the same username and password that I use on my computer and tried to connect it without checking 'Connect using different credentials' (and them by manually typing if it matters) with the same results.

  Even with secure file access enabled, I can still reach the reader very well by typing 'ftp://192.168.1.1/' in the file Explorer.  It prompts me for a username and password, I put in the administrator credentials, and I'm in.  The account, I created with the same name of user and password that my computer works this way.

  After you turn off access to the secure folder as everything is working perfectly again...  I'd rather do it with him, however.

  Follow these instructions: http://homekb.cisco.com/Cisco2/ukp.aspx?pid=80&vw=1&articleid=25813

  When you click the Browse button, that the router shows up when access to secure files is disabled, but not after it is activated.  I've looked through my sharing settings windows and haven't noticed something that should cause problems, about that everything is allowed.  I also tried disabling my firewall without success.

  Well, that was weird...

  I have reset the router, was able to operate with secure file sharing is enabled, but only, I could get a device connected to the player.  I went in the USB storage on the router settings and started to get a bunch of error 2123 and 2118 s to the point that I was not yet able to change the settings.  On the USB, I noticed a file named "." ftp_share.nfo"what is strange because it seemed sure whether a file instead of a folder in previous tests.  I deleted the folder and all the errors disappeared, had haunted all my settings for the drive into the router, and now it works perfectly...

• When you try to view the networking of the Explorer, my explore crashes and windows have no reason why.

  I am currently running Windows 7 home, and as the title suggests, whenever I try to access the network in Windows Explorer, it crashes. Does it as well as I'm in safe mode with network. Any help will be welcome.

  Hello

  1. What is the accurate and complete error message you get?
  2. don't you make changes to the computer before the show?

  Method 1
  I suggest you try the steps from the following link:

  Windows Explorer may hang in Windows 7 or in Windows Server 2008 R2
  http://support.Microsoft.com/kb/2515325

  Method 2
  I suggest you run virus scan online by using the Microsoft safety scanner.

  Microsoft safety scanner
  http://www.Microsoft.com/security/scanner/en-us/default.aspx

  Note: when you do an antivirus online, you will lose data that are affected by the virus. Microsoft is not responsible for the loss of this data.

• From Firefox blocks all access to the network

  When I start Firefox (41.0.1), all access to the network is completely blocked. Before you start the FF, I can access the Internet (with Chrome or IE), other computers, but as soon as I launch Firefox, all access to the network (including the connection to other computers) is blocked. In addition, my computer will turn off more.

  As far as I KNOW, I have not installed lately extensions or add-ins.

  Thank you for your resolution. Today, when I mentioned to work, I was told to update Firefox. This seems to do the trick (so far, fingers crossed!).

  (https://support.mozilla.org/en-US/kb/refresh-firefox-reset-add-ons-and-settings) so very probably an extension is causing harm.

  When this isn't ' t the resolution, I will surely return to your resolutions.

• Firefox opens, but this morning, I can't access all the links via Firefox. I can through Explorer. I prefer Firefox. Help!

  Firefox opens, but this morning, I can't access all the links via Firefox. I can through Explorer.

  One possible cause is security software (firewall) that blocks or limits Firefox or plugin-container process without informing you, possibly after the detection of changes (update) for the Firefox program.

  Delete all rules for Firefox in the list of permissions in the firewall and leave your firewall again ask permission to get full unlimited access to the internet for Firefox and the plugin-container and the update process.

  See:

  • https://support.Mozilla.com/kb/server+not+found
  • https://support.Mozilla.com/kb/firewalls

• We get an error "NETWORK CONNECTION ERROR, make sure a firewall is not blocking access to the printer.

  * Original title: printer error...

  I was printing with a printer wireless for months and now all of a sudden I'm getting an error, NETWORK CONNECTION ERROR and then readings make sure that a firewall is not blocking access to the printer.   I checked and it is not blocked...  I did a session of disorder and it reads no problems found.   Can someone please...

  Hello

  1. what version of Windows is installed on the computer?

  2. What is the brand and model of the printer?

  3. you have any non-Microsoft firewall installed on the computer?

  4. what security software is installed on the computer?

  5 have have there been recent changes made on the computer before the show?

  Please follow the steps below and check if that helps.

  Method 1: Run troubleshooting network printer and check.

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-network-printer-problems

  Method 2: Select the file and printer sharing

  http://Windows.Microsoft.com/en-us/Windows-Vista/enable-file-and-printer-sharing

  Method 3: I suggest to change firewall security settings, or disable the security software on the system and try to access the printer.

  Note: make sure that you enable the antivirus software, other security and firewall after the test programs.

  For more information, see the articles and check out them.

  Understanding Windows Firewall settings

  http://Windows.Microsoft.com/en-us/Windows-Vista/Understanding-Windows-Firewall-settings

  Enable or disable Windows Firewall

  http://Windows.Microsoft.com/en-us/Windows-Vista/turn-Windows-Firewall-on-or-off

  Allow a program to communicate through Windows Firewall

  http://Windows.Microsoft.com/en-us/Windows-Vista/allow-a-program-to-communicate-through-Windows-Firewall

  Let us know if it helps!

• When I have access to the internet, I get a page advertisement of Windows Explorer that is empty.

  Original title: Windows Explorer announced.

  When I have access to the internet, I get a page advertisement of Windows Explorer that is empty.  How can I stop this coming?

  I think I found a solution.  A very good actually, if it works.  I opened the adversiment. just a line in the upper part of the screen and goes to unsubscribe.  The line mentioned coupons that I'm not interested.

  He said that it takes several days to unsubscribe, so I don't know if it will work.

• I'm trying to access a wireless network with the password provided for me. I get the following error message

  I'm trying to access a wireless network with the password provided for me. I get the following error message: "the network password needs to be 40bits or 104bits depending on your network configuration. This can be entered as 5 or 13 characters ascii or hexadecimal 10 or 26. "what does this error message mean and how do I address so that I can access the wireless network?

  I use XP Professional with service pack 3. I get this error message every other time I try to log in to a protected wireless network security. I used to not get this message; but, now, it may be impossible, sometimes to call all wireless providers when I might only need for a short period or after hours service opening.

  In addition, it is my computer that requires the network password to be different, not the provider of wireless. A password is given to me who works for other users, but my computer won't let me use it.

  Hello

  I suggest you to visit these links and check if it helps:

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_xp-networking/the-network-password-needs-to-be-40-bits-or-104/f3fdc3ee-CB40-4107-A632-082093dcdcb8

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_xp-networking/need-to-connect-to-home-wireless-network-Windows/5bf37a22-cc42-4a0f-9d15-83e780f00123

  It will be useful.

• Access to the hard drive USB network - WAG310G

  Hello.. I have a 500 GB USB hard drive attached to my WAG310G, but it can be accessed from the network. IM using XP Pro.

  Someone suggested to go to start / run and typing \\192.168.1.1\, but I just get an error "the network not found path.

  This seems to be a really hard to find an answer, because I can't find any help on the internet either.

  Help, please!

  See / Kevbb.

  I think that you do not have the possibility to access the drive on the network, but you can use the interface of the router to store your entire network on the USB connected to your router.

  If you have DDNS service, you can manage the storage device using the WAN IP address. To enable WAN HTTP access, you must enable remote access on the Administration > management screen and disable the firewall on the security > firewall screen.

• Disable network access to the registry

  Hello

  How to disable network access to the registry?

  Thank you
  Agnes

  Please explain more in detail what you are trying to do; for example, your end goal. Include information about your computers and network (working group? Field?) so you can get targeted help you want. These links will show you what information to include in your next post:

  How to post

  http://www.elephantboycomputers.com/page2.html#Usenet (you can ignore the references to Usenet discussion groups / as you post on a web forum, but any suggestions on how to write the post are applies here too)

  http://support.Microsoft.com/default.aspx/KB/555375 - how to ask a Question MS - MVP - Elephant Boy computers - Don ' t Panic!

• The user read/write register access to the network folder/drive. Some users unable to save or write to the directories.

  I have three users who have no problem with read/write & record readers records secure network access. I have two users who can read some files and save in some files, but cannot save or access certain folders even after receiving full access read/write for all files in the network drive. Help, please. The computers running Vista Ultimate and server access to Windows Server 2003. Thanks for your times * address email is removed from the privacy *.

  Problems related to access to the files on a server networked in a business environment are a produce little for Windows answers Forum.  I recommend you repost the question either in the Technet Forum to the:http://social.technet.microsoft.com/Forums/en-us/winserverfiles/threads orhttp://social.technet.microsoft.com/Forums/en-us/itprovistanetworking/threads.

  I don't know that someone there can help you.

  Good luck!

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Access to the wireless network

  All of a sudden I can't access my wireless network that I use for this computer for 2 years.  My modem works as I have tested.  But it does not find my wireless network.

  Hello

  Power Off (Unplug) your Modem (cable, DSL or other type ISP service you are using) and the router and waiting
  3 minutes and power and then turn it back on. Then, restart the computer.

  Your router could be suspicious here, you have successfully updated its firmware as a possible solution? And I would like to
  Update your WiFi drivers on computers. How you are positioned in the router? Are there
  obstacles in the path?

  Actually try updating your driver and disabling the network logon. Use a wire or download the drivers on
  another computer then transfer them using removable media.

  Control Panel - network - write down of the brand and the model of the Wifi - double click top - tab of the driver - write
  version - click the driver update (cannot do something that MS is far behind the pilots of certification). Then
  Right click on the Wifi device and UNINSTALL - Reboot - it will refresh the driver stack.

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  How to install a device driver in Vista Device Manager
  http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.html

  Download - SAVE - go where you put it - right click – RUN AS ADMIN.

  You can download several at once however restart after the installation of each of them.

  After watching the system manufacturer, you can check the manufacturer of the device an even newer version. (The
  manufacturer of system become your backup policies).

  Repeat for card (NIC) network and is a good time to get the other updated drivers as Vista like
  updated drivers.

  I would also turn off auto update for the drivers. If the updates Windows suggests a just HIDE as they
  are almost always old, and you can search drivers manually as needed.

  How to disable automatic driver Installation in Windows Vista - drivers
  http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
  http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx

  ------------------------------------------------------

  Make sure you know the details of connection to your router wireless and wired - SSID and password.

  You lose connection when you do and have to redo your logon.

  Control Panel - Network & Sharing Center - right, click Customize - page set of network locations.
  lower left click on merge or delete network locations - REMOVE all instances of your network (and the
  others you don't use anymore) - REBOOT. Start - Connect To log on to the network.

  -----------------------------------------------------

  Check this box:

  Strange problem with Internet under Vista
  http://www.catonett.com/blog/archives/194

  Windows Vista cannot obtain an IP address from certain routers or some non-Microsoft DHCP servers
  http://support.Microsoft.com/kb/928233/en-us

  ----------------------------------------------------

  And:

  Network connection problems
  http://windowshelp.Microsoft.com/Windows/en-us/help/33307acf-0698-41ba-B014-ea0a2eb8d0a81033.mspx

  I hope this helps.

  Rob - bicycle - Mark Twain said it is good.