Access to the Web-based script

Similar Questions

• Adobe flash player 11.0 blocks access to the Web site home pages

  Why is Adobe flash player 11.0, allowed to block access to the Web site home pages, until their trash is installed?  They should be prosecuted for punishment of the loss of time by Internet users, who spend countless hours trying to fix their garbage, which takes control of the web and blocks PCs access to their program settings, unless it is done according to their specific updates. N ' ILS OWN INTERNET and everything on it, or what?

  Are you sure he blocked it, or the web page requires Flash Player to see this?

  Most web pages require an element of Adobe Flash Player.

  First of all, try to enable Active Scripting in the areas of Sites Internet Options, security settings, trust.

  You should also add a corrupted on.

  Click Start, type: Internet Options

  Press enter

  Select the "Advanced" tab

  Under reset Internet Explorer settings, click "reset".

  This should restore the Internet Explorer default settings.

  Then reinstall Flash Player

  http://get.Adobe.com/flashplayer/

  ----------

  Flash Player

  Troubleshoot installation of Flash Player for Windows

  http://kb2.Adobe.com/CPS/191/tn_19166.html

  Troubleshooting player stability and performance

  http://blogs.Adobe.com/JD/2010/02/troubleshooting_player_stabili.html

  Uninstaller

  http://kb2.Adobe.com/CPS/141/tn_14157.html

  Flash Player Support Forum

  http://forums.Adobe.com/community/webplayers/flash_player

• The accessibility of the Web APEX is consistent?

  I am referring to the Web Content Guidelines of the accessory (http://www.w3.org/TR/WCAG20/).
  
  For most of the projects of governance, the requirement is that any application is supported - the accessibility of the web. This means, it doesn't have to be unencumbered, but that of alternatives not indicated if any user has some disadvantage (disability or some options turned off, etc.) and cannot use a special function.
  
  I would like to know if anyone has experience with the type of action must be taken to ensure that an ApEX application is «supported web accessibility» Y at - there no official statement on this subject and the Apex Oracle?
  
  I have my doubts about the use of
  * Icons = > may depend on the theme, but is always a text alternative for the included icons?
  * JavaScript = > APEX Will still work if JavaScript is disabled?
  * Cookies = > I think apex may work with sessions of the url instead of using cookies. Has anyone ever tried?
  * ...?
  
  _ applications based on the overview of the requirements of the W3C for browser
  
  Noticeable
  
  -Provide non-text content text alternatives.
  -Provide captions and alternatives for audio and video content.
  -Make content adaptable; and make it available to assistive technologies.
  
  -Use sufficient contrast to make things easy to see and hear.
  
  Operable
  
  -Make all the keyboard of accessible features.
  -Give users enough time to read and use content.
  -Do not use the content, causing convulsions.
  -Help users navigate and find content.
  
  Understandable
  
  -Make the text readable and understandable.
  -Make content appear and operate predictably.
  -Help users avoid and correct mistakes.
  
  Robust
  -Maximize compatibility with current and future technologies.
  
  Published by: W. Sven on September 11, 2009 11:54

  Sven,

  I did some 508 complaint with APEX development in the past, and it is really very easy.

  The mechanism of the apex model makes it easy to make your 508 compliant applications. The only thing to keep in mind when creating applications is that less is more; You may need are reluctant to use jQuery or other frameworks based on JavaScript, because they usually give screen readers a moment difficult.

  The directives that you posted are a good start. There are also a lot of information available online, more precisely at http://www.section508.gov/

  Another thing - we were able to get a couple of disclaimers with some of the more complex pages that we have built, as they were not for all users, but only for a select few users admin.

  I hope this helps!

  -Scott-

  http://spendolini.blogspot.com
  http://sumnertech.com

• Possible security for the Web-based Configuration

  My colleagues and I found something very interesting today... Despite having configured the FTP security settings (which have been confirmed to set up and in funcitoning. I can't open an FTP session to our remote target without specifying a username admin and the password) If you open the configuration tool based OR web in a browser, you can send via FTP to and from the target using the file remote browser without being connected to all! Everyone knows this?

  Apparently, these permissions are separate from FTP, but you can define these special permissions on the page of the security configuration for the web-based configuration utility.

• Problems with access to the web pages, email, video, etc. even when I have 4-5 bars.

  I installed a Dell Wireless 1505 low-profile carrier 1.2 antenna dim/insp in desktop. Its a PCIe wireless lan card. But since last Tuesday patches have been installed I had problems with access to the web pages, email, video, etc., even when I have 4-5 bars.  Someone at - it an idea of what's going on.

  Hi William e. Swann

  1. what web browser do you use?

  Method 1:

  You can read the following article and check.

  You may experience connectivity problems or performance issues when you connect a portable computer that is running Windows Vista or Windows 7 to a wireless access point

  Method 2:

  You can also read the following article.

  How to troubleshoot network connectivity problems in Internet Explorer

  Hope this information is useful.

• N3048 access to the Web Interface without OOB

  I recently had our switch replaced by RMA and have access to the web interface via oob. I'm not sure how to access ports and other subnets and want to access the web interface of the server room outside. It's probably something very obvious, but I don't have the original switch to check the configuration. Any help would be appreciated. Thank you.

  You can use in-band or oob access to administration from inside or outside the server room.  The port of oob is a completely separate network used for management only, but you can also use a port in the Strip management.  By default, VLAN 1 is usually used in the Strip to transport of management traffic.  If you set an IP address on VLAN 1 you should also be able to manage from this IP address.  Measures would be to define the IP address on VLAN 1, ping ping to test connectivity, remote and then use your browser to connect to the web INTERFACE.  You should be able to use the same username/password that was used for the oob port.  Without a set of name of user and password, the web INTERFACE will not allow the session.

  B

• Download VMDK files from the browser to the Web-based data store

  Hello

  I want to download the virtual computer VMDK file using the browser of the Web-based data store. I know how to do, but there is something I don't understand.

  I have configured my VM with a provisioning. From the VI client, I see that the size of the vm.vmdk is 4 GB.  The size of proviosned is 20 GB.

  Technically speaking, if I download the VMDK file, it should be 4 GB, however, from the browser on the vm - flat hard size Web-based data store is 20 GB... What is the standard behavior? Is there a way to download only the actually used 4 GB?

  Hello.

  This is the expected behavior, and as much as I know there is no work around if you use the browser to store data.

  Good luck!

• WRT110-problem accessing the Web-based Setup Page

  I can't access the configuration page based on web for the WRT110 router I have. I am able to make a connection on two computers without the router, but when I add them I get an error message in my browser.

  I tried to access the configuration page based on the web both of my computers and some information were followed by Ecritel.net, but I'm having no luck. I receive the following error message "missed connection: connection to the server was reset while the page is loading." The network link was interrupted for negotiating a connection. Please try again. »

  Any advice would be greatly appreciated! Thank you!

  Actually, I get a different error message now. I made a few adjustments to things like the start menu, which is a problem before. Here is the new error message I received:

  Network timeout Server 192.168.1.1 takes too long to respond. The requested site did not respond to a connection request and the browser has stopped waiting for a response

  Can experience the high demand server or a temporary outage? Try again later.

  Are you unable to navigate to other sites? Check the computer's network connection.

  Is your computer or a network protected by a firewall or proxy? Incorrect settings can interfere with browsing the web.

  Still having trouble? See your network administrator or your Internet service provider for assistance.

  Someone at - it ideas? I searched on the Internet, but nothing I've tried works. Thank you in advance!

• How to access the Web-based utility?

  I have problems to connect to my wireless router, and when I put "admin" (WITHOUT the QUOTES) on the password, the same

  Guest returned three times and after that the message says "'401 authorization required ' (WITHOUT the QUOTES)." I do not understand, I installed the wireless router, just after that I have spend admin and my password (*). Can someone please help?

  My wireless router is

  Wireless-N Router

  Model: WRT160N

  To connect to your router, let the empty user name, then the password, use "admin" (without the quotes).  If you have changed the password of the router connection, use the password that you changed to.  If it does not, the most likely cause is a firewall problem (see information on this below), or you use the wrong password (it may need to reset the router to factory default - more on this below).  Here is my set full of tips for the display of the pages in your router configuration.

  To view the web pages of the router:

  You don't need an Internet connection.  'web Pages' of the router are integrated into the router.
  Use Internet Explorer, it usually works.
  JavaScript must be enabled.
  Use a computer that is connected to the router.
  In the non-working computer, temporarily disable your firewall software.

  If you use Zone Alarm, do a right-click on the ZA icon in the taskbar (bottom right of screen) then click on "Shutdown ZoneAlarm" and see if that solves your problem. If this does not work, try the following with Zone Alarm: open the control center ZAISS, go to privacy, then temporarily disable Ad Blocking and Cookie Control and see if it solves your problem.

  If you use Noton Internet Security with the add-on Pack, don't forget to disable the blocker and ad blocker. Some users have reported that they needed to uninstall all Norton Add-on Pack.

  If you can not get anything to 192.168.1.1 then perhaps this is not the address of the router. Go to 'Start' > all programs > Accessories > command prompt.
  A black DOS window will appear. Type "ipconfig" (with no quotes), and press the Enter key. Look at the "default gateway". It is 192.168.1.1? Point your browser to the 'default gateway', can connect you to your router.

  If the above fails, unplug your modem router, then try again. If it solves your problem, then you probably a "modem-router" rather than a regular modem. Check if your modem-router "" uses the same address as your Linksys router 192.168.1.x space. If this is the case, then the report with this problem and also specify the brand and model of your modem router.

  If all above fails them, turn off your entire system, unplug it from the wall, wait a minute, then lights up, then try again.

  If all the above tips fail, then reset the default router: power down the router and unplug all the wires. Wait a minute. Switch on the router, let it fully boot (1-2 minutes), then press and hold the reset for 30 seconds button, then release the button and allow the router to reset and restart (2-3 minutes). Turn off the router. Wait a minute. To connect to a computer, cable, a router's LAN port. Initialize the system. It should work.  Now, your password will be reset to 'admin' (without the quotes).

  If the reset does not fix your system, then you must download and install (or reinstall) the latest firmware for your router. After the update of the firmware, you must reset the default router, and then configure the router again from scratch. If you have saved a router configuration file, DO NOT use it.

• virtual access using the web browser

  can I access virtual machine that installed on esxi using the web browser (Internet explorer)

  Hello

  You can access the console of the Web Client vSphere.

  lamw wrote a nice script to generate direct links to consoles, if you want to distribute to other people who are not so familiar with the web client:

  http://www.virtuallyghetto.com/2011/10/how-to-generate-VM-remote-console-URL.html

  He also wrote another script to generate previously authenticated links:

  http://www.virtuallyghetto.com/2013/09/how-to-generate-pre-authenticated-HTML5.html

• Re-uploaded because there was no access to the web, and it is not yet. Opens in private browsing, no Firefox tab is visible, so I can't do anything.

  I don't remember having chosen Private Browsing until I deleted Firefox on my computer. After you download from the Web site, the same screen appears. It does not resemble the Web site displays. I have a screenshot, but don't see a way to fix it here.
  The top line is blue background of Windows and said "Start Mozilla Firefox - Mozilla Firefox (private browsing) Page".
  Lower than that of the context Tan the usual File, Edit, View etc.
  Lower than a tab with: the image of Fox and the "Mozilla Firefox Start Page.
  Thaat below: arrow, arrow, box "go to a Web site", and arrears on the right a blue g and a tab drop down to search engines, down for downloads and the symbol of the House.
  bottom line usual Google that shows that my most used bookmarks
  The large area below that contains the symbol of the Fox in the Center above the search box (which does not). In the upper right corner is "mozilla" gray type.
  Crossing the lower part is a clear grey banner with "downloads, Favorites, history, modules, sync and Settings" with their symbols above.
  I had to remove PC Matic Supershield to get the download to work at all, and now after hours of tests, I am right where I started.

  Make sure that you are not Firefox running in (permanent) private browsing mode.

  • https://support.Mozilla.org/KB/private+browsing
  • Tools > Options > privacy > Firefox will be: "use the custom settings for history".
  • Uncheck the box: [] "always use the navigation mode private.

  You can check for problems with preferences and try to rename or delete the file prefs.js and possible prefs - numbered # .js and a user.js file possible to restore the values all default prefs.

  • http://KB.mozillazine.org/Preferences_not_saved
  • http://KB.mozillazine.org/Resetting_preferences

  Try to start the computer in safe mode Windows with network support (on the startup screen, press F8) as a test to see if that helps.

  One possible cause is security software (firewall, antivirus) that prevents or limits Firefox or plugin-container process without informing you, possibly after the detection of changes (update) for the Firefox program.

  Delete all rules for Firefox and the plugin-container in the permissions list in the firewall and leave your firewall again ask permission to get full unlimited access to the internet for Firefox and the plugin-container and the update process.

  See:

  • https://support.Mozilla.org/KB/server+not+found
  • https://support.Mozilla.org/KB/firewalls

• missing components of the web-based configuration

  Hi all

  I have two controllers cRIO-9074 on my network, both with the OR-RIO 4.0 software installed.  When I open a web browser to display utilities 'OR configuration & monitoring Web-based', a cRIO not show four of the eight tools on the left side of the interface of Silverlight.  Missing the Console Remote File Browser, Web Server Configuration and installed the Configuration Tools.

  I would like for the user of this system be able to download its data files, every day or so using the remote file browser, so this feature would be nice to have. Any ideas?

  Kind regards

  Marvin Perry, DRESSED

  
  

• WVC210 DYDNS AND PROBLEMS WITH ACCESS TO THE WEB

  I have 2 Configuration for WVC210 cameras on dydns of deleted I can't see them on the web. I can access via the local network using the ip address and port or the dyndns name and port. The router has listed as a virtual server and I even put one of them is like DNZ (outside the firewall of the router), the port check tools show a port opened from a remote location. And I can ping. But I can't connect to the camera. Also, I was able to view a WVC54GCA camera with the same configuration. Any ideas?

  I can get both of these cameras no problem... just not able to connect but the login box comes right to the top as soon as I hit him enter after you put the URL...

• Linksys spa3102, unable to connect to the web-based utility.

  I have a problem... try to configure my spa3102 voip router, I can't connect you to the basic utility web (192.168.0.1/admin/advanced) page that he asked me to in the installation guide.

  a reapears of error "404-File not found" every time.

  Help, please

  first of all, make sure that your computer is connected to the LAN port on the back of the SPA3102 - then, click Start > run > type cmd > click OK > type ipconfig > hit Enter - glance to the DEFAULT GATEWAY - use to access the web interface of the SPA3102

  ex. If the default gateway as 192.168.1.1 type http://192.168.1.1 in the address bar of your IE - you can then click admin on the upper right of the screen and then click on advanced, also on the upper right of the screen

  * Sometimes the IP address of SPa3102 changes to a different address, especially if the device when you connect the WAN port has the same IP address which is 192.168.0.1

• WRT54G V8 cannot connect to the web-based configuration page?

  Earlier, I reset my router and was able to use 192.168.1.1 to visit the configuration page based on the web while trying to restore a home network, now that I have a new computer using Windows 7 that can not use the easylink advisor. I was able to get on the page update my SSID and WEP key. But when my wireless devices were still having problems to you connect to the internet, I tried to go back to the page and found that I can't seem to connect, even if my office is able to connect to other websites very well.

  Anyone know what I can do wrong? I use Verizon DSL. I was able to ping to the router and all tests have shown that it was connected fine, but I still can't get on the configuration page and my laptop can't connect to the network. I tried to reset the router again and still nothing. And Yes, I went through several cycles of power. I have also tried to move if the network card on my computer, but the computer said it was impossible to create a card for him, although at the time I had listed as a home network.

  Wireless on 192.168.1.1 connections often fail.  Using the router configuration pages, always use a computer that is connected to the WRT54G.

  If the above does not solve your problem, so here are my other tips to see the router configuration pages:

  You don't need an Internet connection. 'web Pages' of the router are integrated into the router.
  Use Internet Explorer, it usually works.
  JavaScript must be enabled.
  Use a computer that is connected to the router.
  In the non-working computer, temporarily disable your firewall software.

  Point your browser to 192.168.1.1, and then connect to your router. Your username must be left blank. Your password is "admin" (without the quotes), unless you changed it.

  If you use Zone Alarm, do a right-click on the ZA icon in the taskbar (bottom right of screen) then click on "Shutdown ZoneAlarm" and see if that solves your problem. If this does not work, try the following with Zone Alarm: open the control center ZAISS, go to privacy, then temporarily disable Ad Blocking and Cookie Control and see if it solves your problem.

  Some Zone Alarm users reported that the addition of 192.168.1.1 to their address list "of trust" solved the problem. This trick can also work with other firewalls.

  If you use Noton Internet Security with the add-on Pack, don't forget to disable the blocker and ad blocker. Some users have reported that they needed to uninstall all Norton Add-on Pack.

  If you can not get anything to 192.168.1.1 then perhaps this is not the address of the router. Go to 'Start' > all programs > Accessories > command prompt.
  A black DOS window will appear. Type "ipconfig" (with no quotes), and press the Enter key. Look at the "default gateway". It is 192.168.1.1? Point your browser to the 'default gateway', can connect you to your router.

  If the above fails, unplug your modem router, then try again. If it solves your problem, then you probably a "modem-router" rather than a regular modem. A report with this problem and also specify the brand and exact model of your modem (not router) number.

  If all above fails them, turn off your entire system, unplug it from the wall, wait a minute, then lights up, then try again.

  If all the above tips fail, then reset the default router: power down the router and unplug all the wires. Wait a minute. Switch on the router, let it fully boot (1-2 minutes), then press and hold the reset for 30 seconds button, then release the button and allow the router to reset and restart (2-3 minutes). Turn off the router. Wait a minute. To connect to a computer, cable, a router's LAN port. Initialize the system.  The router should work, but you will need to configure your router again from scratch.  If you have saved a router configuration file, DO NOT use it.

  If you still have problems, then you must download and install (or reinstall) the latest firmware for your router. After the update of the firmware, you must reset the default router, and then configure the router again from scratch. If you have saved a router configuration file, DO NOT use it.