accessibility for people of vision

Similar Questions

• Problems with accessibility for people with low vision problems

  The company I work, developing courses that are often made for people with a Visual acuity greater than 20/70. Thus, the requested solution was that courses should have a button that changes the size of the text, and the user can choose what size is better for him. The problem is that you can call a javascript function that makes Web sites, but the same features that make it, does nothing inside a captivate course. Due to the size of the land, there a lot of hard work to do 5 States of the text of a legend to each of these texts, because javascript are much more quickly and dynamically.

  Someone at - he has worked with such a prior problem, which has a better solution?

  No I have not met this particular query before.  But I think it probably means using Captivate would work in this case too.  With the exception of the course adapted and dynamic text that is generated from the inserted variables, most of the text within an release of Captivate gets transformed into images.  That is why the javascript function you mentioned earlier does not work.  There is no text to expand, only the images.

• DREAM WEAVER access for people with visual impairments

  How DreamWeaver and Adobe PhotoShop software accesses a person visually impaired (blind).  Y at - it a screen reader that will read this software.  The current that I use does not read because it is not txt.

  Screen readers can access the main menu elements in dreamweaver and photoshop, but they will not otherwise content, especially in photoshop as it's graphic content.

  In Dreamweaver, it may be possible to display the access code, but even once it will otherwise not seen live.

• Installing the software on cRIO for Application of Vision

  Hello people, OR

  I'm working on a vision cRIO-9082 real-time application that uses. I installed Labview Professional 2011 on my host (default Installation) and configured my cRIO in MAX.  The most recent site NI OR-RIO 12.0.1 pilots were intalled on my cRIO.

  I decided to start dumping a small application on my cRIO as suggested in the document below

  http://www.NI.com/white-paper/10867/en#toc2

  through this document, as shown in step 2, I do not have Born no matter what server OR-IMAQ or NOR-IMAQdx RT on my cRIO. I called SUPPORT and they advised to reinstall the development vision with custom module by selecting these two drivers. But during the installation I found no option to select these determinants of the RT.

  Are these drivers for real-time vision applications are already included in my NOR-RIO 12.0.1 or do I still need to install separately? I did not camera ethernet at the moment to check if crio works or not. In the license manager I see LabVIEW RT is installed and enabled

  My cRIO is ready for dumping a program and vision applications?

  Host: LabVIEW Professional 2011 SP1 development system

  Target: cRIO-9082 with NOR-RIO 12.0.1

  Concerning

  Neo

  Yes, that's what I thought.

  You have the recommended software stack (RSS) installed - you will see the mention of "modules" when using an RSS feed.  You must perform a custom installation that the document you specified.  When you go to install the software in MAX, on the FIRST SCREEN EVERYTHING (after the launch of the software installation wizard), you are presented with a number of options - you probably just click on ' NI RIO 12.0 - November 2012 "by default because it has a Ribbon of gold next to him.  Don't, don't.  Click on "custom software".  You will get then a word of setting warning something like: ' don't do that if you know what you are doing "-If you don't get the warning, you know that you are not right.

  Once you cross, LabVIEW Real-time and so on probably will be selected (as you have installed an RSS feed), but the options of your choice (that is, the components of the Vision) will be visible.

  -Danny

• How can I email a card for people who use my SkyDrive?

  How can I email a card for people who use my SkyDrive?

  How can I email a Christmas card to people who use my SkyDrive?

  It has nothing to do with Word, but you either put the Christmas card in the Public folder and send link to this folder for people who want to 'receipt' card, or create a new folder and invite these people to access this folder in which you put the Christmas card.

  Should ask questions about SkyDrive in http://windowslivehelp.com/

• Screen reader accessibility for noninteractive objects

  I work at 8 Cp and try to do a course entirely compatible Section 508. I tested with the Window-Eyes screen reader. The screen reader can access the reading and fine TOC bar buttons, and it usually recognizes interactive elements on the screen. However, most of the time, the screen reader is not recognizing the legends or the intelligent forms with text on screen. Many slides are just text and a button transparent text to pause the screen, therefore, that I need the screen reader to read the content of the course. According to the documentation, I shouldn't copy the text in the name of accessibility for each object, although I tried in a few places without success. The accessibility feature looks so flaky. From time to time, I can get something to work, but not completely, or I can't repeat.

  I was able to get the screen reader to read the text if I remove all the interactive elements, including the reading and TOC bar. In other words, if I have a class 1-slide, Captivate accessibility works. As soon as I try to give people an option to move to the next slide with a control button or the play bar, it stops working.

  Yes, accessibility is enabled. I tried to hide the rectangle around the objects in HTML5. I tried editing both SWF and HTML5. I tried to text buttons transparent instead click on the boxes, which seemed to make a small difference. I tried different shortcuts and ensured that I never use the same shortcut twice on a single slide.

  How access a screen reader text within Captivate content? The documentation says you can access it with arrows, but it does not work. People do in the real world in order to make it accessible when the program does not work the way that the documentation says it should? I know from reading other threads that some organizations have given up and just went to provide text alternatives.

  I am open to any suggestion.

  My suggestion is that do you what others have already done.  Try to make Captivate content "fully Section 508 compliant" is not a realistic goal.

  As you noted, screen readers prefer to pay attention to the interactive objects.  If you must use interactive objects even for text objects that does not need to be buttons.  (You can set their action IT success to no Action so that they just sit and do nothing.)

  But you're still going to have problems at some point and these questions will be showstoppers.

  So, save yourself a lot of hassle and invoke the clause to exhaust all of the Section 508 and W3C accessibility documents which allows you to offer a "text alternative".  Create an accessible MS Word or PDF document that contains the same content.  You're going to do in a short time it would take you to try in VAIN to get e-learning content of Captivate to satisfy all the rules of Section 508.

  Probably NOT what you wanted to hear, but I really think someone needs to say this.

• Remote secure access for teleworkers

  For the future, we would like our employees to be able to access their desktops from remote view.

  We used Citrix for remote access for years, but I think time has come to make a change.

  (We also examined the Citrix XenDesktop VDI solution but the complexity of the installation and the process of image editing we scared)

  But back to VMware...

  "VMware View can be integrated with your existing VPN solution"

  Since we do not have an existing VPN Solution, I'm looking for information on what people use and would recommend.

  Thank you very much.

  Hello jamesfool

  VMware has a secure server that you can put them in the DMZ, then you bind it with the display Manager (in the secure lan)

  The secure server allows only RDP over SSL connections (443 or port you defined)

  This step encompasses all types of additional licenses and worsk fine. The only question is who does not work with PCoIP.

  I hope I help.

  Por don't favor no olvides calificar las responses that you were should o ayuda valiosos.

  Please, do not forget the points of call of the "useful" or "correct" answers

  Best wishes / Saludos

  ________________________________________

  ING. Diego Quintana

  VCP 410 - VCP 310 - VAC - VTSP

  My Linkedin profile

  Join the Virtualizacion en Español group in LinkedIn

  ! http://feeds.feedburner.com/WetcomGroup.1.gif!

• I want to use Outlook Web Access for Mac, I don't want to use the light version, I want the full version, but you can't push off the mark. I have firefox 3.6.10

  I want to use Outlook Web Access for Mac (snow leopard 10.6.8), I don't want to use the light version, I want the full version but I can't push off the mark on the light version. I have firefox 3.6.10

  (1) you must update at least Firefox 3.6.24 because there are questions of SECURITY of KNOWN MANY with the version you are using.

  (2) the light version is required on non - IE browsers, except if you are running Exchange Server 2010. With Exchange 2010 they added support for multiple browsers run in the version "no light".

• I have a problem with error 53.I know this mistake is for people who have their iPhones fixed by a third party before, the thing is my iphone 6 was never taken to a third party before, so all opinions

  I have a problem with error 53.i have 6 + and I m out of warranty. I know this error is for people who have their iPhones fixed by a third party before, the thing is my iPhone 6 + was never taken to a third person before, error 53, it isn't my fault .i was going to do a upgrade to the new version

  All view of what can be done

  If your device is outside its warranty, you can always make an appointment at the Apple Genius Bar to have the studied unit. 53 error will also occur if there is other material errors that are not defined on the device. One of them has to do with contact IDS. Your Touch ID was never working, or did it stop working? Have you had damage to the device by dropping, water damage or damage to the 'home' button?

  Apple can examine the device and determine your options. You will also be flooded with other options for independent repair facilities, however before turn you to this, understand that their work on your device will void any support post-warranty Apple, and there is no way of knowing that the qualities of these repair facilities, as they are not certified by Apple, as Apple does not certify independent repair facilities. If you decide to go this route, be sure to only find a way to check the reviews, etc..

• the itunes library could not be saved you have enough greenest access for this operation

  I get the following message when I upload music when I am in itunes. the itunes library could not be saved. You have enough greenest access for this operation

  Hi WesleyJefferson,

  ·         Did you do changes on the computer before the show?

  Follow the suggestions below for a possible solution:

  Method 1: These messages occur if the permissions are incorrect on your designated music folder or a folder in your designated music folder. The permissions are settings that determine who can read, write, or execute a file or a folder on your computer. Each file and folder on your hard drive has an associated permission set.

  Example: If the permissions are correct on your music folder, but incorrect on the U2 folder inside your music folder, you would be able to add other music to your iTunes library, but not this new U2 album.

  To apply permissions to a file or folder, see the article mentioned below:

  How to set, view, change, or remove special permissions for files and folders in Windows XP

  http://support.Microsoft.com/kb/308419

  Method 2: You can also read the article and check.

   

  Difficulties to add music to iTunes or audio CD import library

  http://support.Apple.com/kb/TS1387

   

  Method 3: Try to uninstall iTunes and other apple system applications and reinstall iTunes again. See the apple Web site to download iTunes. Click on the link below.

  http://www.Apple.com/

  Let us know if this information will help.

• I already bought 2 XP Professional pay. Now to buy Windows 7, I still have to pay for my PC and laptop computers. There is a special offer for people like me? Meet _ @_. ___

  I already bought 2 XP Professional pay. Now to buy Windows 7, I still have to pay for my PC and laptop computers. There is a special offer for people like me? Answer to * address email is removed from the privacy *

  Consider the Windows 7 Home Premium Upgrade Family Pack.

• Try to set up remote access for Foscam babyphone. Windows Vista & I have A Westell router. I can't understand this helps :(

  Im trying to set up remote access for a babyphone Foscam (Fl8918W). I worked on it all day.  No matter what I do, I can't get the camera to get on my computer (or iPhone).

  Here's some of what I've done so far...

  -Camera configuration and find the IP address

  -Type the IP address of the camera in the browser and camera open (it uses Active X)

  -Change Port number of the camera (Guide suggested using 2000)

  -Now you can type the IP address and the port number in the browser and access camera

  -Complete the Port forwarding on the router (I did this several times using each option that I could understand. Finally, I think that I did it correctly because it looked like he turned on - but I don't really know.  "I couldn't get any real information on the Port Forwarding for my Westell A90-750045-07).

  -Access using the public IP address.  It did not work at all. I had to find my IP address for my computer/network (which I did) then open my browser and type the IP address followed by: 2000 (new port). The camera was then to open in the browser, but it did not work.

  -IP service.  Management said that the device could be available over the internet using a public IP address. He told me to go on No - IP and sign up for the free service.  After the signing, I was directed to create a host name.  I managed to do it.

  -L' direct access of the ACTIVE camera address No - IP.  I was directed to type my address No - IP (hostname) in my browser, followed by: and the Port number (: 2000). He said that I should then able to access my camera from a computer or mobile app on the Internet using this address.  This does not at all.

  -J' tried to make it work with my iPhone. I was directed to download and install an application called Live Cams Pro - by Eggman Technologies.  He then ordered me to add a camera. I chose the correct model of Foscam, entered the IP address (or my No - IP address) WITHOUT port number, then on another line, I entered the Port number, entered my user name and password and click Save.  Nothing ever came and finally the connection times out.

  I did all the change of option combinations in each stage as many times I could think.  All I could change in these steps, I tried all the options I could.  I can't make it work.

  I'm so frustrated.  I'm not a computer person.  I managed to do a lot of things by reading the instructions carefully.  I read the Foscam Installation Guide and the next babyphones instruction manual (I bought the camera from the company).  Nothing I've tried works.

  Any direction would be greatly appreciated.

  Thank you!

  Did you put the IP cameras as a destination / local IP?
  If this is not the case, do.

  Aside from that, the best would be to contact the manufacturer of your router for assistance with how to correctly forward ports to your camera.

• do not have enough privileges to access for this operation when you try to download a Disney DVD

  try to download a digital Disney DVDs to my computer for transefer to my IPAD.  I get thie suite merror message. : FAILED to DOWNLOAD FROM DVDs TO a COMPUTER.  YOU HAVE ENOUGH ACCESS FOR THIS OPERATION PRIVIEGES. "Can somone return a fort to correct his problem?  Thank you...

  Hello

  Try a right click on it, then - run as administrator

• Prerequisites for the IBM I access for Windows with Windows 8.1

  I have several new computers with Windows 8.1 who need access to an AS400 via I Access for Windows.  I know that before this, I have to install 2 conditions (vcredist_x86.exe and vcredist_x64.exe) before the installation of Access for Windows.  I didn't know of these 2 conditions on Windows 8.0 installation problems, but I'm having a problem installing on Windows 8.1. Are there new prerequisites for Windows 8.1 patches!

  I I've installed Access for Windows on another machine of 8.0 and then upgraded the operating system to 8.1 without problem.

  Your help would be greatly appreciated.

  Thank you.

  Alex

  Hi LXMC,

  I'm not familiar with Iaccess, but you have installed the latest service packs to the site:

  http://www-03.IBM.com/systems/power/software/i/access/windows_sp.html

• SSH and Telnet access for catalyst 4503 list

  I was wondering the structure of command to apply an access list to ssh and telnet on a catalyst 4503. I keep a list of access for indoors and outdoors. Can afford two different IPs from the outside? Thank you

  You will need create an access list indicating the networks/hosts that you want to allow.

  -Example

  access-list 10 permit 10.10.1.10

  access-list 10 permit 10.10.2.10

  access-list 10 permit 127.1.0.0 0.0.255.255

  access-list 10 permit 192.168.1.0 0.0.0.255

  So you want to put this list of access on the VTY interfaces.

  -Example

  line vty 0 4

  access-class 10

  entry ssh transport * if you only want to SSH *.

  line vty 5 15

  access-class 10

  entry ssh transport * Ditto *.

  Now you can do all this with * line vty 0 15 * but, it gives you a better idea of what is happening. It is a simplistic configuration. Remember that it is advisable not to allow ssh. If you want to allow at the same time, let him * transport input ssh * out of the configuration.

  I hope that gives you an idea of the structure. If this is not the case, let me know.