Remote secure access for teleworkers

For the future, we would like our employees to be able to access their desktops from remote view.

We used Citrix for remote access for years, but I think time has come to make a change.

(We also examined the Citrix XenDesktop VDI solution but the complexity of the installation and the process of image editing we scared)

But back to VMware...

"VMware View can be integrated with your existing VPN solution"

Since we do not have an existing VPN Solution, I'm looking for information on what people use and would recommend.

Thank you very much.

Hello jamesfool

VMware has a secure server that you can put them in the DMZ, then you bind it with the display Manager (in the secure lan)

The secure server allows only RDP over SSL connections (443 or port you defined)

This step encompasses all types of additional licenses and worsk fine. The only question is who does not work with PCoIP.

I hope I help.

Por don't favor no olvides calificar las responses that you were should o ayuda valiosos.

Please, do not forget the points of call of the "useful" or "correct" answers

Best wishes / Saludos

________________________________________

ING. Diego Quintana

VCP 410 - VCP 310 - VAC - VTSP

My Linkedin profile

Join the Virtualizacion en Español group in LinkedIn

! http://feeds.feedburner.com/WetcomGroup.1.gif!

Tags: VMware

Similar Questions

Password reset the role on the same server as Secure Access?

It is safe to add the role of reset of password on the same server as Secure Access? We have our server configuration to secure access for the Web and AppPortal access.

After you install the role of reset of password on the access to the Web server, I discovered they don't work together. Password service would not start and installing beat all the Web site on the server.

Remote access for PXI with DAQmx

I have a PXI chassis with a real-time embedded (PXI-8186) controller and some modules DAQ (PXI-6259) x 2. I've been programming this via LabWindows with a kind of client-server of RT - UI thing by using network variables and others. For some applications, it would be enough and more convenient to be able to interact with the PXI hardware directly from a connected PC network DAQ.

The controller running a VISA server, it seems that I could connect to a remote machine with a kind of viOpen ("visa://pxi.somewhere.com//PXI0::15:INSTR"); ") and then contact a particular data acquisition card. But I can't find any information on the programming of the 6259 in any way other than DAQmx or similar.

First question then: is the interface PXI - 6259 VISA described anywhere?

More practical would be to continue to use DAQmx, through something like DAQmxCreateDOChan (taskHandle,"pxi.somewhere.com//Dev1/port0/line0:4",...)

I found references to what we call 'Remote access appliance', for example:

http://digital.NI.com/public.nsf/allkb/5CC9792C6CD4A34C862565BC0072D5DF

that seems to put in place something equivalent, but I don't find it to watch it in MAX:

Start-> all programs-> National Instruments-> NI - DAQ-> the remote device access server

and I've seen suggestions that maybe it isn't that for traditional DAQ or only pre 7.0, or in any other way was no longer applicable.

Second question: "Remote device access" are always and how to I install/activate it on my PXI controller?

Someone at - it clues as to the foregoing, or any other way to get the same kind of features?

Thank you

Mike Schacht

LANL

Hello Mike,.

Remote device access was a feature in NOR-DAQ traditional long just now. This feature was not worn on OR-DAQmx because the framework it was built on does not really correspond with the need of modern times for network security.

Unfortunately, there is no functionality you describe by saying to DAQmx. Currently, this type of control is limited to deploying applications to the target of RT. While the VISA is used for some parts of the DAQmx interaction, these function calls are not documented. Someone else on the forums may be able to help if they tried to implement something like this in the past.

Good luck!

Cannot install the update of security KB979402 for win2k ("Access denied" error)... help?

for awhile now, I have not been able to install "Security Update for Windows Media Player 9 for Windows 2000 (KB979402)", through windows update. I always failed, and here are the steps I took:

(1) tried to use windows update. the program launches, recognizes a necessary update, downloads the file and fails to install, leaving this error message:

"the following updates were not installed:

"Security Update for Windows Media Player 9 for Windows 2000 (KB979402).

(2) reinstalled windows update agent according to the instructions here:

http://social.msdn.Microsoft.com/forums/en-us/windowsdesktopsearchhelp/thread/c1d64ba5-AAA1-4EAE-AD04-d7e85418199e/

I can't tell if windows update agent has been reinstalled successfully, but the problem persists.

(3) tried to use http://www.update.microsoft.com/ where the file downloads but won't install.

(4) manually downloaded "Security Update for Windows Media Player 9 for Windows 2000 (KB979402).

tried to install, a message "error installation KB979402, Access is denied."

5) tried to "force installation" by entering this in run:
C:\WUAGENT\Windows2000-windowsmedia-KB979402-x86-enu.exe /wuforce

who did get a weird window listed some "availible orders"... end, passing through update.microsoft.com again proves the update has not yet been installed. I'm now ideas. Help?

Are you running Win2K SP4?

What application or antivirus security suite is installed and your current subscription? What anti-spyware (other than Defender) applications? What third-party firewall (if applicable)?

A (another) Norton or McAfee application has already been installed on the computer (for example, a free trial version which is preinstalled when you bought it)?

~~~~~~~~~~~~~~~~~~~~

How to reset the Windows Update components?
[Run the difficulty in default and aggressive mode]
http://support.Microsoft.com/kb/971058

NB: Access KB971058 via Internet Explorer (32-bit) only not any other browser.

~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

Try to set up remote access for Foscam babyphone. Windows Vista & I have A Westell router. I can't understand this helps :(

Im trying to set up remote access for a babyphone Foscam (Fl8918W). I worked on it all day. No matter what I do, I can't get the camera to get on my computer (or iPhone).

Here's some of what I've done so far...

-Camera configuration and find the IP address

-Type the IP address of the camera in the browser and camera open (it uses Active X)

-Change Port number of the camera (Guide suggested using 2000)

-Now you can type the IP address and the port number in the browser and access camera

-Complete the Port forwarding on the router (I did this several times using each option that I could understand. Finally, I think that I did it correctly because it looked like he turned on - but I don't really know. "I couldn't get any real information on the Port Forwarding for my Westell A90-750045-07).

-Access using the public IP address. It did not work at all. I had to find my IP address for my computer/network (which I did) then open my browser and type the IP address followed by: 2000 (new port). The camera was then to open in the browser, but it did not work.

-IP service. Management said that the device could be available over the internet using a public IP address. He told me to go on No - IP and sign up for the free service. After the signing, I was directed to create a host name. I managed to do it.

-L' direct access of the ACTIVE camera address No - IP. I was directed to type my address No - IP (hostname) in my browser, followed by: and the Port number (: 2000). He said that I should then able to access my camera from a computer or mobile app on the Internet using this address. This does not at all.

-J' tried to make it work with my iPhone. I was directed to download and install an application called Live Cams Pro - by Eggman Technologies. He then ordered me to add a camera. I chose the correct model of Foscam, entered the IP address (or my No - IP address) WITHOUT port number, then on another line, I entered the Port number, entered my user name and password and click Save. Nothing ever came and finally the connection times out.

I did all the change of option combinations in each stage as many times I could think. All I could change in these steps, I tried all the options I could. I can't make it work.

I'm so frustrated. I'm not a computer person. I managed to do a lot of things by reading the instructions carefully. I read the Foscam Installation Guide and the next babyphones instruction manual (I bought the camera from the company). Nothing I've tried works.

Any direction would be greatly appreciated.

Thank you!

Did you put the IP cameras as a destination / local IP?
If this is not the case, do.

Aside from that, the best would be to contact the manufacturer of your router for assistance with how to correctly forward ports to your camera.

Evaluation version for the cisco secure access control server

Hello

I can get the trial version for the cisco secure access control server. IF SO pls send me the link.

Thank you

Hi Thomas,

You can download ACS for windows 4.1 or 4.2 from the link below:

http://www.Cisco.com/cgi-bin/tablebuild.pl/ACS-win-eval

For ACS 5.x, please visit cisco.com

Download software > Security > Cisco Secure Access Control System 5.x > Secure Access Control System Software

HTH

Kind regards

Jousset

Please evaluate the useful messages-

Remote VPN access - add new internal IP address

Hello

I have an existing configuration of Cisco VPN client in ASA 5510 for remote access.

-------------------------------------

Name of the Group: ISETANLOT10

Group password: xxxx

IP pool: lot10ippool, 172.27.17.240 - 172.27.17.245

enycrption: 3DES

authentication: SHA

------------------------------------

the connection was successful, and I was able to ping to the internal server 172.47.1.10.

Now, there is demand for remote access VPN even can do a ping to access a new server within LAN, 172.57.1.10 & 172.57.1.20

But with the same VPN access, I was unable to ping the two new IP.

How can I add both IP in order to make a ping by using the same configuration of remote access VPN?

I have attached below existing config (edited version)

===

: Saved
:
ASA Version 8.0 (4)
!
hostname asalot10
names of
name 172.17.100.22 NAVNew
name 172.27.17.215 NECUser
172.47.1.10 NarayaServer description Naraya server name
name 62.80.122.172 NarayaTelco1
name 62.80.122.178 NarayaTelco2
name 172.57.1.10 IPVSSvr IPVSSvr description
name 122.152.181.147 Japan01
name 122.152.181.0 Japan02
name 175.139.156.174 Outside_Int
name 178.248.228.121 NarayaTelco3
name 172.67.1.0 VCGroup
name 172.57.1.20 IPVSSvr2
!
object-group service NECareService
Description NECareService remote
the eq https tcp service object
EQ-ssh tcp service object
response to echo icmp service object
inside_access_in deny ip extended access list all Japan02 255.255.255.0
inside_access_in ip VCGroup 255.255.255.0 allowed extended access list all
inside_access_in list extended access deny tcp object-group PermitInternet any object-group torrent1
inside_access_in list extended access allowed object-group ip PermitInternet any newspaper disable
inside_access_in list any newspaper disable extended access allowed host ip NarayaServer
inside_access_in list extended access permit ip host IPVSSvr all
inside_access_in list any newspaper disable extended access allowed host ip NAVNew
inside_access_in list extended access permit ip host 172.17.100.30 all
outside_access_in list extended access allow object-group objects NECare a NECareService-group
outside_access_in list extended access allowed host ip DM_INLINE_NETWORK_1 NarayaServer object-group
outsidein list extended access permit tcp any host Outside_Int eq https
outsidein list extended access allowed object-group rdp any host Outside_Int debug log
outsidein list extended access allowed host tcp object-group DM_INLINE_NETWORK_2 eq Outside_Int 8080
outsidein list extended access allowed host ip DM_INLINE_NETWORK_3 IPVSSvr object-group
inside_mpc list extended access allowed object-group TCPUDP any any eq www
inside_mpc list extended access permit tcp any any eq www
inside_nat0_outbound list of allowed ip extended access all 172.27.17.240 255.255.255.248
inside_nat0_outbound list extended access permit ip host NarayaServer Nry_Png object-group
inside_nat0_outbound list extended access allowed host ip IPVSSvr2 172.27.17.240 255.255.255.248
outside_cryptomap list extended access permitted ip object-group Naraya_Png-group of objects Nry_Png

Global interface 10 (external)
NAT (inside) 0-list of access inside_nat0_outbound
NAT (inside) 10 0.0.0.0 0.0.0.0
static (inside, outside) interface tcp 8080 8080 NarayaServer netmask 255.255.255.255
static (inside, outside) tcp 3389 3389 NAVNew netmask 255.255.255.255 interface
public static tcp (indoor, outdoor) interface ssh IPVSSvr2 ssh netmask 255.255.255.255
Access-group outsidein in external interface
inside_access_in access to the interface inside group
Route outside 0.0.0.0 0.0.0.0 175.139.156.173 1
Route inside 172.17.100.20 255.255.255.255 172.27.17.100 1
Route inside NAVNew 255.255.255.255 172.27.17.100 1
Route inside 172.17.100.30 255.255.255.255 172.27.17.100 1
Route inside NarayaServer 255.255.255.255 172.27.17.100 1
Route inside 172.47.1.11 255.255.255.255 172.27.17.100 1

Route inside VCGroup 255.255.255.0 172.27.17.100 1

Crypto ipsec transform-set ESP-AES-256-MD5 esp-aes-256 esp-md5-hmac
Crypto ipsec transform-set ESP-DES-SHA esp - esp-sha-hmac
Crypto ipsec transform-set ESP-DES-MD5 esp - esp-md5-hmac
Crypto ipsec transform-set ESP-AES-192-MD5 esp-aes-192 esp-md5-hmac
Crypto ipsec transform-set ESP-AES-256-SHA 256 - aes - esp esp-sha-hmac
Crypto ipsec transform-set ESP-AES-128-SHA aes - esp esp-sha-hmac
Crypto ipsec transform-set ESP-AES-192-SHA esp-aes-192 esp-sha-hmac
Crypto ipsec transform-set ESP-AES-128-MD5-esp - aes esp-md5-hmac
Crypto ipsec transform-set ESP-3DES-MD5-esp-3des esp-md5-hmac
Crypto ipsec transform-set esp-SHA-ESP-3DES-3des esp-sha-hmac
life crypto ipsec security association seconds 28800
Crypto ipsec kilobytes of life - safety 4608000 association
Dynamic crypto map SYSTEM_DEFAULT_CRYPTO_MAP 65535 set pfs
Crypto dynamic-map SYSTEM_DEFAULT_CRYPTO_MAP 65535 value transform-set ESP-AES-128-SHA ESP-AES-128-MD5 ESP-AES-192-SHA ESP-AES-192-MD5 ESP-AES-256-SHA ESP-AES-256-MD5 ESP-3DES-SHA MD5-ESP-3DES ESP-DES-SHA ESP-DES-MD5
Dynamic crypto map SYSTEM_DEFAULT_CRYPTO_MAP 65535 define security association lifetime 28800 seconds
cryptographic kilobytes 4608000 life of the set - the association of security of the 65535 SYSTEM_DEFAULT_CRYPTO_MAP of the dynamic-map
card crypto outside_map 1 match address outside_cryptomap
card crypto outside_map 1 set 218.x.x.105 counterpart
card crypto outside_map 1 set of transformation-ESP-3DES-SHA
outside_map map 1 lifetime of security association set seconds 28800 crypto
card crypto outside_map 1 set security-association life kilobytes 4608000
outside_map card crypto 65535-isakmp dynamic ipsec SYSTEM_DEFAULT_CRYPTO_MAP
outside_map interface card crypto outside
crypto ISAKMP allow outside
crypto ISAKMP policy 10
preshared authentication
3des encryption
sha hash
Group 2
life 86400
crypto ISAKMP policy 30
preshared authentication
3des encryption
md5 hash
Group 2
life 86400

internal ISETANLOT10 group policy
ISETANLOT10 group policy attributes
value of server DNS 172.27.17.100
Protocol-tunnel-VPN IPSec l2tp ipsec
username, password nectier3 dPFBFnrViJi/LGbT encrypted privilege 0
username nectier3 attributes
VPN-group-policy ISETANLOT10
username password necare encrypted BkPn6VQ0VwTy7MY7 privilege 0
necare attributes username
VPN-group-policy ISETANLOT10
naraya pcGKDau9jtKgFWSc encrypted password username
naraya attribute username
VPN-group-policy ISETANLOT10
type of nas-prompt service
type tunnel-group ISETANLOT10 remote access
attributes global-tunnel-group ISETANLOT10
address lot10ippool pool
Group Policy - by default-ISETANLOT10
IPSec-attributes tunnel-group ISETANLOT10
pre-shared-key *.
tunnel-group 218.x.x.105 type ipsec-l2l
218.x.x.105 group of tunnel ipsec-attributes
pre-shared-key *.
type tunnel-group ivmstunnel remote access
tunnel-group ivmstunnel General-attributes
address lot10ippool pool
ivmstunnel group of tunnel ipsec-attributes
pre-shared-key *.
!

=====

Remote VPN access must allow the connection, but I'm guessing that your ASA does not know how to get to the two new destinations.

You have a name and a static route to the job to 172.47.1.10 Server:

name 172.47.1.10 NarayaServer description Naraya Server

route inside NarayaServer 255.255.255.255 172.27.17.100 1

.. but no equivalent for the two new hosts. As a result, all traffic of ASA destiny for them will attempt to use the default route (via the external interface).

If you add:

route inside 172.57.1.10 255.255.255.255 172.27.17.100

route inside 172.57.1.20 255.255.255.255 172.27.17.100

(assuming this is your correct entry), it should work.

Customer remote cannot access the server LAN via VPN

Hi friends,

I'm a new palyer in ASA.

My business is small. We need to the LAN via VPN remote client access server.

I have an ASA5510 with version 7.0. I have configured remote access VPN and it can establish the tunnel with success. But I can not access the server.

Client VPN is 5.0.07.0290 version. Encrypted packages have increased but the decrypted packet is 0 in the VPN client statistics, after I connected successfully.

Next to the ASA, I show crypto ipsec sa, just deciphering the packets increase.

Who can help me?

Thank you very much.

The following configuration:

ASA Version 7.0(7)
!
hostname VPNhost
names
dns-guard
!
interface Ethernet0/0
nameif outside
security-level 10
ip address 221.122.96.51 255.255.255.240
!
interface Ethernet0/1
nameif inside
security-level 100
ip address 192.168.42.199 255.255.255.0
!
interface Ethernet0/2
shutdown
no nameif
no security-level
no ip address
!
interface Management0/0
shutdown
no nameif
no security-level
no ip address
management-only
!
ftp mode passive
dns domain-lookup inside
access-list PAT_acl extended permit ip 192.168.42.0 255.255.255.0 any
access-list allow_PING extended permit icmp any any inactive
access-list Internet extended permit ip host 221.122.96.51 any inactive
access-list VPN extended permit ip 192.168.42.0 255.255.255.0 192.168.43.0 255.255.255.0
access-list VPN extended permit ip 192.168.43.0 255.255.255.0 192.168.42.0 255.255.255.0
access-list CAPTURE extended permit ip host 192.168.43.10 host 192.168.42.251
access-list CAPTURE extended permit ip host 192.168.42.251 host 192.168.43.10
pager lines 24
mtu outside 1500
mtu inside 1500
ip local pool testpool 192.168.43.10-192.168.43.20

arp timeout 14400
global (outside) 1 interface
nat (inside) 0 access-list VPN
nat (inside) 1 access-list PAT_acl
route outside 0.0.0.0 0.0.0.0 221.122.96.49 10

username testuser password 123
aaa authentication ssh console LOCAL
aaa local authentication attempts max-fail 3

no sysopt connection permit-ipsec
crypto ipsec transform-set FirstSet esp-des esp-md5-hmac
crypto dynamic-map dyn1 1 set transform-set FirstSet
crypto dynamic-map dyn1 1 set reverse-route
crypto map mymap 1 ipsec-isakmp dynamic dyn1
crypto map mymap interface outside
isakmp enable outside
isakmp policy 1 authentication pre-share
isakmp policy 1 encryption des
isakmp policy 1 hash md5
isakmp policy 1 group 2
isakmp policy 1 lifetime 86400
isakmp nat-traversal 3600
tunnel-group testgroup type ipsec-ra
tunnel-group testgroup general-attributes
address-pool testpool
tunnel-group testgroup ipsec-attributes
pre-shared-key *
telnet timeout 5

ssh timeout 10
console timeout 0

: end

Topology as follows:

Hello

Configure the split for the VPN tunneling.

Create the access list that defines the network behind the ASA.

ciscoasa(config)#access-list Split_Tunnel_List remark The corporate network behind the ASA. ciscoasa(config)#access-list Split_Tunnel_List standard permit 10.0.1.0 255.255.255.0

Mode of configuration of group policy for the policy you want to change.

ciscoasa(config)#group-policy hillvalleyvpn attributes ciscoasa(config-group-policy)#

Specify the policy to split tunnel. In this case, the policy is tunnelspecified.
```
ciscoasa(config-group-policy)#split-tunnel-policy tunnelspecified 
```

Specify the access tunnel split list. In this case, the list is Split_Tunnel_List.

ciscoasa(config-group-policy)#split-tunnel-network-list value Split_Tunnel_List

Type this command:

ciscoasa(config)#tunnel-group hillvalleyvpn general-attributes

Associate the group with the tunnel group policy

ciscoasa(config-tunnel-ipsec)# default-group-policy hillvalleyvpn

Leave the two configuration modes.

ciscoasa(config-group-policy)#exit ciscoasa(config)#exit ciscoasa#

Save configuration to non-volatile RAM (NVRAM) and press enter when you are prompted to specify the name of the source file.

Kind regards
Abhishek Purohit
CCIE-S-35269

ASA 5505 VPN remote cannot access with my local network

Hello guys, I have a problem with my asa 5505 remote VPN access to the local network, the VPn connection works well and connected, but the problem is that I can't reach my inside connection network of 192.168.30.x, here's my setup, please can you help me

ASA Version 8.2 (1)

!

!

interface Vlan1

nameif inside

security-level 100

192.168.30.1 IP address 255.255.255.0

!

interface Vlan2

nameif outside

security-level 0

IP 155.155.155.10 255.255.255.0

!

interface Vlan5

No nameif

no level of security

no ip address

!

interface Ethernet0/0

switchport access vlan 2

!

interface Ethernet0/1

!

interface Ethernet0/2

!

interface Ethernet0/3

!

interface Ethernet0/4

!

interface Ethernet0/5

!

interface Ethernet0/6

!

interface Ethernet0/7

!

passive FTP mode

inside_nat0_outbound list of allowed ip extended access any 192.168.100.0 255.255.255.240

pager lines 24

asdm of logging of information

Within 1500 MTU

Outside 1500 MTU

IP local pool vpn-pool 192.168.100.1 - 192.168.100.10 mask 255.255.255.0

ICMP unreachable rate-limit 1 burst-size 1

don't allow no asdm history

ARP timeout 14400

Global 1 interface (outside)

NAT (inside) 0-list of access inside_nat0_outbound

NAT (inside) 1 0.0.0.0 0.0.0.0

Timeout xlate 03:00

Timeout conn 01:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02

Sunrpc timeout 0:10:00 h323 0:05:00 h225 mgcp from 01:00 0:05:00 mgcp-pat 0:05:00

Sip timeout 0:30:00 sip_media 0:02:00 prompt Protocol sip-0: 03:00 sip - disconnect 0:02:00

Timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute

timeout tcp-proxy-reassembly 0:01:00

dynamic-access-policy-registration DfltAccessPolicy

No snmp server location

No snmp Server contact

Server enable SNMP traps snmp authentication linkup, linkdown cold start

Crypto ipsec transform-set esp-SHA-ESP-3DES-3des esp-sha-hmac

Crypto ipsec transform-set ESP-AES-256-MD5 esp-aes-256 esp-md5-hmac

Crypto ipsec transform-set ESP-DES-SHA esp - esp-sha-hmac

Crypto ipsec transform-set ESP-DES-MD5 esp - esp-md5-hmac

Crypto ipsec transform-set ESP-AES-192-MD5 esp-aes-192 esp-md5-hmac

Crypto ipsec transform-set ESP-3DES-MD5-esp-3des esp-md5-hmac

Crypto ipsec transform-set ESP-AES-256-SHA 256 - aes - esp esp-sha-hmac

Crypto ipsec transform-set ESP-AES-128-SHA aes - esp esp-sha-hmac

Crypto ipsec transform-set ESP-AES-192-SHA esp-aes-192 esp-sha-hmac

Crypto ipsec transform-set ESP-AES-128-MD5-esp - aes esp-md5-hmac

life crypto ipsec security association seconds 28800

Crypto ipsec kilobytes of life - safety 4608000 association

crypto dynamic-map SYSTEM_DEFAULT_CRYPTO_MAP 65535 pfs Group1 set

Crypto dynamic-map SYSTEM_DEFAULT_CRYPTO_MAP 65535 value transform-set ESP-AES-128-SHA ESP-AES-128-MD5 ESP-AES-192-SHA ESP-AES-192-MD5 ESP-AES-256-SHA ESP-AES-256-MD5 ESP-3DES-SHA MD5-ESP-3DES ESP-DES-SHA ESP-DES-MD5

outside_map card crypto 65535-isakmp dynamic ipsec SYSTEM_DEFAULT_CRYPTO_MAP

outside_map interface card crypto outside

crypto ISAKMP allow outside

crypto ISAKMP policy 10

preshared authentication

3des encryption

sha hash

Group 2

life 86400

Telnet timeout 5

SSH timeout 5

Console timeout 0

dhcpd outside auto_config

!

a basic threat threat detection

Statistics-list of access threat detection

no statistical threat detection tcp-interception

WebVPN

Mull strategy of Group internal

attributes of the Group mull strategy

Protocol-tunnel-VPN IPSec

username privilege 0 encrypted password eKJj9owsQwAIk6Cw xxx

VPN-group-policy Mull

type mull tunnel-group remote access

tunnel-group mull General attributes

address vpn-pool pool

Group Policy - by default-mull

Mull group tunnel ipsec-attributes

pre-shared-key *.

!

class-map inspection_default

match default-inspection-traffic

!

!

type of policy-card inspect dns preset_dns_map

parameters

message-length maximum 512

Policy-map global_policy

class inspection_default

inspect the preset_dns_map dns

inspect the ftp

inspect h323 h225

inspect the h323 ras

inspect the rsh

inspect the rtsp

inspect esmtp

inspect sqlnet

inspect the skinny

inspect sunrpc

inspect xdmcp

inspect the sip

inspect the netbios

inspect the tftp

!

global service-policy global_policy

context of prompt hostname

Yes, you will need to either configure split tunnel so that internet traffic goes out through your local Internet service provider, GOLD / directed by configuration current you are tunneling all traffic (internet traffic Inc.) to the ASA, then you will need to create NAT for internet traffic.

To set up a tunnel from split:

split-acl access-list allowed 192.168.30.0 255.255.255.0

attributes of the Group mull strategy

Split-tunnel-policy tunnelspecified

Split-tunnel-network-list value split-acl

I hope this helps.

I want to use Outlook Web Access for Mac, I don't want to use the light version, I want the full version, but you can't push off the mark. I have firefox 3.6.10

I want to use Outlook Web Access for Mac (snow leopard 10.6.8), I don't want to use the light version, I want the full version but I can't push off the mark on the light version. I have firefox 3.6.10

(1) you must update at least Firefox 3.6.24 because there are questions of SECURITY of KNOWN MANY with the version you are using.

(2) the light version is required on non - IE browsers, except if you are running Exchange Server 2010. With Exchange 2010 they added support for multiple browsers run in the version "no light".

Why can't connect using Apple Airport WIFI of my remote security cameras but can connect using the Xfinity WIFI Modem/Router open?

Why can't connect using Apple Airport WIFI of my remote security cameras but can connect using the Xfinity WIFI Modem/Router open?

Two possibilities:

(1) your airport WiFi might have a network name that is not in line with best practices, wireless

A good wireless network name is...

... In short no more than 20 characters

Simple... no special characters like an apostrophe, dollar sign, asterisk, etc.

Compact, without spaces in the name

For example, a wireless network network name as... red .dfedoryk Apple wireless network... .is not what you want. Something like... .dfedorykwireless. .. masse are much more likely to connect to non-Apple devices.

Same guidelines your password

(2) Apple gives the same name to network 2.4 GHz and 5 GHz network that produces double router band. Some non-Apple devices are confused by the present, you may need to use the option to assign a different name for the network of 5 GHz on the router from Apple. Then, 'point' your device to the network name specific to which you want to connect.

Windows Update keeps wanting to install "Cumulative Security Update for Internet Explorer 8 for Windows XP (KB2618444).

Windows Update keeps wanting to install "Cumulative Security Update for Internet Explorer 8 for Windows XP (KB2618444)", even if it appears in the list of updates to inistalled in the control panel. The installation fails. When I use "Fix it", it indicates that default Windows update data locations have changed, but I can't 'Fix It' to do the repair. In what could be a related issue, Windows Data Execution Prevention (part of IE 8?) detects a malfunctioning or malicious add-on, whenever I try to access a video on ESPN3 and closes the Web page. However, 'Fix It' can not detect any problems with the modules. I don't know what else to try to fix any of these problems.

Bob

Problems with the update of security of Internet Explorer (KB2618444)

Hello

You can check this link:

Troubleshooting Windows Update or Microsoft Update when you are repeatedly offered an update
http://support.Microsoft.com/kb/910339

You can also try this link:

http://support.Microsoft.com/kb/883256

Remote ftp access

I can't get a remote ftp access to my NMH405. I access remotely through https://ciscomediahub.com/ and can browse my files this way, but I need to have a remote access via ftp as well. I put a ut ftp access and it works locally on my home network.

What is my ftp address?

Can anyone help me please with this problem?

Hi Erikkoken,

You will also need to know the external IP address of your location. You can find it at http://www.whatismyip.com/. My internet service provider gives me a dynamic IP address, so it will change every 24 hours. To resolve this problem, I have install dynamic host for me to http://www.dyndns.com/name. You will also need to read the instruction manual for router for DDNS, so you can tell it where to point to and update the IP address.

I hope this helps.

Error Application Security Access is Denied as administrator on file object

I get access denied whenever I try to delete or rename a file. I am logged in as administrator id

BG: I comply ScanSoft PDF Professional and addition to an existing file. The program is dead and now I can't delete, rename, or open the file.

I tried the fixes on the forum; change the owner of the file through file security property properties and command line as administrator 'Takeown f' described in another forum article, but none of the solutions work.

When I do a:

run cmd as Administrator:

takeown /f /r drive: \path dy

on the folder, I get a message now property of

But if I'm going to delete the file, I still get an access denied. I tried to appropriate specifically on the name of the file

takeown /f drive: \path\filename

I get an ERROR: access denied. Message

When I look at the file Properties-Security-owner I see that the current owner is: unable to display current owner

I tried to take possession of the file through Explorer and get a Windows security access is denied.

I tried taking possession of the record with the replace the owner of subcontainers and objects and get a error security application... Access is denied.

I'm out of ideas.

Hi Dave.at.ppsi,

· This file is already on the other computer or this computer only?

I suggest that you check if there is that all previous versions are present, if all previous versions are present, then you can try to restore the previous version and check.

1. right click on the file, click Properties.
2. click on the previous Versions tab.
3. check if all previous versions are available and select the same.
4. click on restore.
5. click on OK.

Now, check if you are able to delete the file or not.

You can also scan the computer for viruses and check, try to run the virus scan online from the link: http://safety.live.com

Thank you, and in what concerns:
Swathi B - Microsoft technical support.

Visit our Microsoft answers feedback Forum and let us know what you think.

Remote VPN access

I'm trying to migrate some VPN remote access for some directors of the power of a router to an ASA 5500. The profile I'm using is vpnclient. When I add the access lists to join networks (10,200 and 10.25) inside what it appears on the route print command is the network of 10,200. I can ping to a server or a client, but cannot ping any network device. I can't ping any device in the subnet 10.25. Any help in this would be greatly appreciated. Here is the config.

Hi Mitch,

Ensure that subnet 10.25.x.x pass thru nat (inside) 0 for example access list 102

HTH

Mike

Remote secure access for teleworkers

Similar Questions

Maybe you are looking for