Acer Aspire R7 - 572 stylus starting from 11/04/16?

Hello

I have an acer r7 - 572 I bought about 2 years ago. I had brought the original stylus for the laptop at the time, but currently he lost. I had to buy a new one, but this model of pen designed especially for this model is no longer registered on the site of the store or on amazon!

I accidentally bought a 'active Stylus II' thinking that it was for this model, but it is for the other R7, not mine.

Are there places to buy the respective pen for this notebook (or a driver to install for the II which would allow me to use it) or I'm going penless?

Thank you very much for the help!

It seems that the previous thread was deleted. One of the links I had was too bad.

Here are the most valid

http://www.CompSource.com/PN/NPSTY1A005/Acer-10/

http://GeizHals.de/Acer-active-stylus-pen-2nd-Gen-NP-sty1a-005-a1370014.html?hloc=at&hloc=de

http://www.microsoftstore.com/store/msusa/en_US/PDP/surface-pen/ProductID.325724000

If you have a Microsoft Store in your area, walk and pick up a pen Surface Pro 3 or 4 Surface Pro.

Note: No driver will make R13 pen you bought the work, as the laptop uses a completely different digitizer.

The digitizer on your R7 is initially made by N-Trig, N-Trig has been used on many different laptops, including the Surface Pro microsft. Microsoft recently bought N-Trig, so that they are now the official manufacturer of the digitizer and pens.

Tags: Acer Laptops

Similar Questions

  • Wireless connection drops after 10-20 seconds on Acer Aspire V3-572 - 56T 3 running Windows 8.1

    I have big problems with the network connection Wireless at the office. He sees the network, allows me to enter security credentials, then connects (with connectivity internet confirmed) but gave up after 10-20 seconds. I tried the wireless network to a friend who worked ok without interruption, is certainly nothing wrong with the hardware. I use a brand new Acer Aspire V3 - 572 - T 56, 3 on Windows 8.1, with all the latest drivers/patches loaded and tried to juggle with many advanced settings for the card of network without success. I connected the router to make sure that all the settings, encryption standards, channels etc was corresponding, but the problem is persistent. It has been going on for two days now and is driving me crazy because I really need to work in the office with wifi band. Plug an ethernet cable directly into the router works fine, but it is not the ideal solution (and poses a danger OH & S that he throws on the ground). Can someone help pleeeease!

    FYI, I ran diagnosis several times & the only thing that stands out was the following:

    Diagnostic information (wireless connectivity)
    The Association status: 0 x 00038002 failure
    Association reason code: 0x00000002

    Result of diagnosis: problem found
    Question: RNWF MSM Helper Class
    Root cause: Windows could not connect to "ERICSSON".
    You can try to connect again.

    Result of diagnosis: problem found

    Root cause:
    Failed to bind wireless to "ERICSSON".
    An answer is not from the router or access point.

    Detailed root cause:
    Failed to bind to this network wireless. Windows has not received response from the router or access point wireless.

    Repair option:
    Search for the causes of the low wireless signal quality
    The signal is weak because of the distance or interference.
    Windows Help and Support can provide more information on this problem.

    No need, already has the solution (which worked for me):

    The fix!
    (This is for windows 8.1)

    THIS bcm94313hmg2l IS ONLY for WINDOWS 8.1 and Broadom.

    -Right click on the Windows tile in the bottom left of the taskbar.
    -Open Device Manager.
    -Expand "network adapters."
    -Right click on your "Broadcom 802.11n Network Adapter.
    -"Update driver software".
    -"Browse my computer for driver software".

    THIS bcm94313hmg2l IS ONLY for WINDOWS 8.1 and Broadom.

    -"Let me pick from a list of drivers for devices on my computer.
    Uncheck "Show compatible hardware".
    -Scroll down on the "Manufacturer" for "Broadcom" Panel and select
    -Scroll down on the "network card:' and find"
    "Broadcom 802.11 Multiband Network adapt."
    -Select, and then click "next".

    THIS bcm94313hmg2l IS ONLY for WINDOWS 8.1 and Broadom.

    -Say yes to the "put to update driver Warning"
    -Close and you should be able to connect with elegance.

  • Carriage of aftermarket for Acer Aspire E1-572-6676

    Hello I would like to install a 2nd hard drive where it should be a cdrom in my Acer aspire E1-572-6676

    There is a plastic tray, but it is not designed to receive a HDD (designers should think about scalability).

    But I see two small connectors at the other end of the slot, would they be msata ports?

    What can I use as a caddy hard drive to put a 2nd SATA not msata HDD?

    You need something like this:http://www.ebay.co.uk/itm/like/390822753540?limghlpsr=true&hlpv=2&ops=true&viphx=1&hlpht=true&lpid=1...

  • Please tell how to enable access to the Advanced BIOS - Acer Aspire E1-572

    Hello

    I recently bought an Acer Aspire E1-572 and come to find out that the BIOS has little information available.

    I need access to advanced options for virtualization support and would like to know how I can do this.

    Acer provide an update of the BIOS for this?

    Thanks a lot for your help.

    Ian

    Hello...

  • help please, acer aspire R7 - 572 to very short range of wifi.

    I have my 2 month old acer aspire R7 - 572, my wifi speed is ok, but you must close to the router. Wifi problem is very short range, any suggustion to help me.

    You can search for "Aspire R7-572 Wifi card Issues" of this forum and see if this helps. There are some good suggestions.

  • My acer aspire one does not start. the scrolling windows screen, then screen turns off. logon appears and resets, sys

    My acer aspire one does not start. the scrolling windows screen, then screen turns off. but after a long time (45mins) the login screen appears and d sysytem restarts. I have a multi boot with 2 installations of xp, and this happens with both bones. not able to access my sys to bak - up also. all f8 options were considered, but no use.

    I have some bad sectors on d: (have total 3 drive partitions c:, d:, e: with xp on c: and e :))
    the sys wud show a blue screen and reboot when certain file wud b accessible on d:... now the sys cannot start all... pls help...

    Hi Srimotu,

    ·         You get an error message or an error code?

    ·         Have you made changes on the computer before this problem?

    Follow these methods.

    Method 1: Try starting it in last known good configuration.

    http://support.Microsoft.com/kb/307852

    Method 2: Try to start in safe mode.

    http://support.Microsoft.com/kb/315222

    If you are able to boot into safe mode, try a clean boot.

    http://support.Microsoft.com/kb/310353

    Note: After the clean boot for troubleshooting, return the computer to a Normal startupmode.

    Method 3: Disconnect external devices such as printer, scanner, etc. and try to start.

    Also disable automatic restart in the event of system failure

    http://support.Microsoft.com/kb/307973

  • Acer aspire 5742 does not start

    Hi all hope you can help - I have an acer aspire 5742 running windows 7. the problem is that it doesn't start not until after bios acer launched toward the top of page and just continuously loop around. F2 and F12 keys available no. function F8 or F10. tried to re-don't boot from the recovery disk no joy. Startup disk in the bios change still no joy. Cannot make a secure boot or system reset as unavailable F8 and F10 keys.

    fan does not (not over heating)

    HD is running

    can you please help

    Hi - I've worked with thanks to you all, I'll wish to explain how to fix at the base.

    1 - Download partition manager free 2014. http://www.Paragon-Software.com/home/pm-express/

    2. run the partition manager and select go delet.

    3 - Select the partition that has 100 MB space and delete

    4. then select the larger partition and delete.

    5 - turn off the power to the laptop

    6 - Turn on the laptop

    7. when the acer page appears, press ALT + F10 ONLY once.

    8. then I chose to install full. higher setting.

    Bingo it completed the complete installation without blocking upward on the desktop.

    This has been mentioned somewhere else where but should be simplified.

    hope that it all works for you.

  • My Acer Aspire R14 does not start with the cord of the charger plugged in with the battery connected to

    A few weeks ago, my laptop Acer Aspire R14 went totally blank. When I unplugged the power cord, it started right to the top, but at the moment where I plugged the power cord back inside would be closed. The battery dies quickly in this way, because it would not charge. I removed the battery then it started upward with the power cord. I thought it must be the battery, so I installed a new battery. which is not to change the problem.

    So, I ordered a new motherboard and after a few weeks, I received it today, installed, and I have always the same thing. It works well with the power cord plugged in until the battery is disconnected. But at the time wherever I connect the battery, everything stops, not to be revived unless I disconnect the battery.

    I need help! What could be the problem?

    Glad I could help.

  • How to add an optical drive and the bezel for Acer Aspire V3-572-5217

    I think to buy the V3 Aspire 572 5217 and I would like to know the process of adding an optical drive. I did some looking and well enough to assume that the majority is universal. I would like to know if the product comes with a scope or if I have to buy a. If Yes, what measures do do so that the right settings?

    Thanks for any advice.

    Hello Brian,.

    For uphill on Aspire V3-572-5217, need you the following:

    42.ML9N2.001 - ODD BEZEL

    33.ML9N2.003 - ODD SUPPORT

    Ko.0080D.014 - DVD RW 8 X SUPER-MULTI 9,0 MM TRAY GUA0N HLDS LF + HF without BEZEL M-SATA DRIVE

    (Hitachi LG data storage)

    KO.00807.016 - DVD RW 8 X SATA M-DISC 9,0 MM TRAY SUPER MULTI DRIVE UJ8E2QBAA2-B PANASONIC

    LF + HF without the PANEL (UJ-8E2)

    You can ask for quote and order these parts in your Acer store.

  • Acer Aspire 5515 does not start

    Well, I have a 5515 Acer Aspire running Windows Vista Home Basic Edition. It hasent been working lately (VISTA USUALLY START!). I have no idea what my BIOS password. In any case, I have a never used Windows Vista Ultimate not copy to level. Can I pop in my computer and without starting Vista, (re) install vista? PLEASE HELP ME! I'VE BEEN WITHOUT A COMPUTER FOR A MONTH! I HAD TO WRITE THIS ON MY IPHONE!

    http://support.Acer.com/

    If you have problems with BIOS password, you will need to contact Acer at the link above.

    ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

    You can't get in your version of Vista has to do an upgrade, you need a license Ultimate FULL Vista to do a clean install, not an ultimate upgrade license.

    BUT you cannot change boot order if you have BIOS password problems.
    Contact Acer is the solution.

    See you soon.

    Mick Murphy - Microsoft partner

  • Acer aspire laptop won't start (at startup)

    Hi I use my computer laptop girls right now because I can't go on mine at all its an Acer aspire 5315 visited with Home Basic. When you turn it on the Acer screen then screen coming says Broadcom UNDI PXE etc., c copyright 2000-2006, copyright 1997 c-200 etc then all rights reserved then it says PXE - E61: Media test failure, check cable, below it says PXE - MOF: out Broadcom PXE ROM, then it says no boot device - insert boot disk and press any key. I do not have a boot disk, the laptop did not come with any disk at all how can I it at startup, there is no mode option before this screen I don't know what to do please can anyone help
    Thanks Bev

    Guys, you need repair disks or complete Vista, Acer has email support and there are merchants in many countries
    who can help with it. Also check the link worldwide Acer here.

    http://www.Acer.com/worldwide/

    http://us.Acer.com/Acer-v2/service.do?LanguageISOCtxParam=en&CTX2.c2att1=25&CountryISOCtxParam=us&ctx1g.c2att92=447&ctx1.att21k=1&CRC=3618978704 Rob - bicycle - Mark Twain said it is good.

  • Acer Aspire R7 - 572 stuck with white screen

    My windows was stuck and I pressed the power button / stop with force. After that turned it back on it was blocked on the acer boot logo I pressed ctrl + alt + delete. It was not the passage of acer logo. Finally, he showed the automatic recovery of windows on the start screen. Since then his black screen stuck on its been nearly two hours. Nothing has worked.
    Help, please.

    Nene,

    I regret that the computer does not load Windows. I would recommend using recovery media to restore the system to factory settings. If you don't have a recovery media, this can be bought through the store.acer.com or by phone with technical support.

    If the recovery media is not available, you can always contact our technical support in your region for assistance. The question might also be related to the HARD drive and would need assistance.

  • Acer aspire e1-572 cd/dvd stopped working

    The CD/DVD drive has stopped working. When you insert a disc, normal sounds, but can here a slight ticking, then disk stops not recognized by Windows Explorer. He has worked in the past as the installed disk drivers for the new printer about 6 months ago.

    Any ideas please?

    mjmuk,

    You can contact Acer technical support in your area to see what options are available to you, which probably is to buy a new.

  • Acer Aspire E1 - 572 G Bluetooth does not work after update to 8.1 Windows

    After the upgrade to Windows 8.1 x 64 bit, my bluetooth does not detect and cannot be detected by other devices (my laptop). In Device Manager, I have NO yellow exclamation points with triangles, when I search automatically updates, windows says everything is up to date (see photo below), so everything looks very well and running. Bluetooth is on, but after research found no devices (even if the phone is also activated bluetooth). Could someone help me please? Thank you very much.

    Uninstall the BT adapter, right click on the Device Manager and select uninstall.

    then restart and install this drivers in support of Acer:

    http://global-download.Acer.com/GDFiles/driver/wireless%20LAN/wireless%20LAN_Atheros_10.0.0.263_W81x...

  • Acer Aspire v3 - 572 g suddenly low fps

    Hello

    Since yesterday evening, I experienced a permanent drop in fps in all games I play (for example, CS etc.).

    Not even a fps drops in some of the older titles, which should not have any problems whatsoever.

    It was not caused by a windows update, since the update was done a few days earlier, and the problem occurs then. (just to be sure, I did a system restore and it does not solve the issue)

    I forced my most powerful graphics processor to work in all circumstances, and the system is set on high performance. I have not installed new programs or made any changes to the system. In fact, the fps drop was so random, I played a game earlier in the day and then a few hours later, when I restarted the game, I was instantly a fps drop from 160 to 50 and it is persistent.

    Basically, Ive tried all solutions there and on Monday im going to get my laptop cleaned of dust, since I him have not done in the 9 months that ive had this laptop.

    The reason why I did this topic was just to maybe get some intel, if could be the possible reasoning behind this fps drop I. Because to me it seems that something is bottlenecking my performance of laptops.

    Or if anyone has some sort of information or ideas, which might work, Id appreciate your time and efforts.

    A few days later all of a sudden the low fps was completely gone, but I have a strong feeling that it was caused by the dust.

    I took it to the service a few days ago and the fps improved even more.

Maybe you are looking for