Acer keyboard not working not after the virus

Similar Questions

• Acer 1810TZ webcam works only after the new installation of Windows 7

  My hard drive died so I don't have access to the recovery partition. I did a fresh install of Windows 7 on a new drive.  Everything works except the webcam.  Windows has recognized and installed the drivers (and works) but nothing can connect to it.  It was working before the accident (also W7).

  The Acer website says it is made by Chicony (is ID 0 c 45 6310 suggests Sonix) so I downloaded and installed the drivers installed and appropriate Acer Crystal Eye, but it crashes at startup without error message.  Skype and other applications cannot connect to the camera webcam.  I also tried all the other drivers on the Acer website, just in case.

  Comparability Windows Center suggests that the pilot was developed by Suyin that might be the problem.  I found some Sonix drivers that will install on the Microsoft ones but make no difference.  I tried to install and Crystal Eye running in compatibility mode.

  Any ideas how to solve this problem?  I am now at a total loss.

  Help much appreciated. Thank you.

  Hi Shalini

  Thanks for getting back to me.

  I am running 64 bit.

  Yes, the webcam is detected under as WebCam imaging devices.

  Drivers been uninstalled (reboot) and re-installed (reboot)

  Webcam programs have been removed (CrystalEye & Skype)

  I downloaded for a Chicony (WebCam_Chicony (AP) _1.1.95.71_Win7x86x64) drivers as Acer judged my Chicony camera Suyin not

  I heard support from Acer, who say that the problem is caused by a difference between OEM and sales at retail of Windows 7 and I need to re - install Windows from the recovery DVD.  I prefer not to do that.

  Thank you

  Nick

• Embedded YouTube videos work locally, but not after the FTP publishing. Works locally and on the web in all other browsers. Using FF 17.0.1 and Adobe Flash 11.5.502

  Found a Tube-video, which I embarked on one of the pages of my site. Using FF 17.0.1 and Adobe Flash 11.5.502, YouTube-videos work locally, but not after the FTP publishing.

  I work reasonable locally and on the web in all other browsers.

  Stupid FF?

  The HTML code is as follows:

  <table WIDTH="770" CELLPADDING="0" CELLSPACING="0">
    <tr VALIGN="TOP">
      <td VALIGN="top" ALIGN="left" width="463">
  <object WIDTH="340" HEIGHT="193">
        <param name="movie" value="http://www.youtube.com/v/N6GvuO_9tLY?fs=1?amp;hl=de_DE">
        <param name="allowFullScreen" value="true">
        <param name="allowscriptaccess" value="always"><embed SRC="http://www.youtube.com/v/N6GvuO_9tLY?fs=1?amp;hl=de_DE" TYPE="application/x-shockwave-flash" WIDTH="340" HEIGHT="193">
      </object>
  </td>
      <td VALIGN="top" ALIGN="left" width="403"></td>
      </tr>
  </table>

  I've experimented on the use of < iframe > instead of < object >. No change. Cache cleared on each attempt.

  Any thoughts?

  If it works in Firefox Safe mode and then disable all extensions (Tools > Modules > Extensions) and then try to find out who is causing by allowing an extension at a time until the problem reappears.

  Close and restart Firefox after each change through "file > exit ' (Mac: ' Firefox > leave";) Linux: "file > exit ')

  Alternatively, you can try to disable hardware acceleration in Firefox.

  • Tools > Options > advanced > General > Browsing: "use hardware acceleration when available.
  • https://support.Mozilla.org/KB/troubleshooting+extensions+and+themes

• Desktop icons not working is not after the closure of the internet.

  Original title: all the answers - desktop icons stop working

  I'm having the same problem with the desktop icons not working is not after the closure of the internet.  Any solution yet?

  Hello

  1. from the desktop icons do not work?

  2. what happens when you try to open these icons?

  3. it happens only after the closing of the internet?

  4. do you use the Internet Explorer browser to surf the internet?

   

  Method 1: Run the following fix - it:

  Difficulty of broken desktop shortcuts and common system maintenance tasks:

  http://support.Microsoft.com/mats/system_maintenance_for_windows/en-us

   

  Method 2: Reset to follow icon cache the mentioned below as follows:

  See the following steps:

   

  a. right-click on an empty area of the desktop and click on personalize.

  b. click the display properties.

  c. under colors, select medium (16 bit) and click on apply.

  NOTE: If you have medium (16 bit) selected, then select Highest (32 bit) instead. Sometimes, you have to do a reboot first, then go to step d. try both ways.

  d. click on Yes to confirm the new setting.

  e. now, select the highest (32 bit) and click OK.

  NOTE: If you already have the highest (32 bit) selected, then select medium (16 bit).

  II. click Yes to confirm the new setting.

  To follow cache icon rebuild the below steps.

  a. Open Folder Options to select (round) display the hidden files and folders.

  b. open a Windows Explorer window.

  c. go to C:\Users\(User Name) \AppData\Local
  d. right-click on IconCache.db and click on delete.

  e. click Yes to confirm the deletion.

  NOTE: This removes the file to the trash. It is safe to empty the trash when you are done.

  f. close the window.

  g emptying the trash.

  h. restart the computer.

  i. When you come back, you will notice the size of the file IconCache.db is reduced, and the update is now the current date. (See screenshot below)
  NOTE: If for some reason any IconCache.db isn't there or the size has not changed much, then just restart the computer again. You may need to restart a few times in some cases.

  j. the icon cache has been rebuilt.

• Illustrator does not not after the last update

  When you open illustrator does not not after the last update

  everything was fine before the update

  also, I use photoshop too, but photoshop is still fine

  I have reinstall but nothing to change

  Problem solved after session connect.

  Solution:

  Rename/Delete the AI CC 2015 "Adobe Illustrator 19 settings: preferences folder

  \AppData\Roaming\Adobe\ C:\Users\

  Kind regards

  Rambour

• Printer works only after the reboot or shutdown

  I use win xp sp3 computer. My only works only after the restart or shutdown. If I reinstall the printer driver, then it will work. I have reinstall win xp but similer happen again. I scanned my system with kaspersky. But no change. I need a permanent solution. Please help me...

  Hi Pierre,.

  1. what exactly happens when you try to use the printer?

  2. you receive messages or error codes?

  3. What is the brand and model of your printer?

  Method 1:

  You can try to start the fixit printer and check if it helps:

  Diagnose and automatically fix problems printing and printer

  Also see the article and check:

  Resources for the resolution of the printer in Windows XP problems

  Method 2:

  You can check the event viewer to learn more about the problem.

  Procedure to view and manage event logs in Event Viewer in Windows XP

• Some keys on the keyboard does work not after the suspect virus on Tecra

  Apostrophe, delete, semicolon and the end of the keys no longer work after a suspected virus attack. I found the same problem on the net record but apparently this guy fixes his problem after stop scroll or NumLock on found him.

  This isn't the case here, but it's something with numlock - registry Watch 2 and not 0. switch to 0 but when reboot 2 times.
  Suspect has changed through the bios. I thought that I couldn't get to the bios because DEL key does not but found ESC works.
  Tried to reset the values default to the bios but then can't save and exit it in accordance with the EndKey to work.

  I was running XP at the time of the (alleged) attack and could not correct the problem so to put the computer OEM as I hoped would help - there no, same problem, so instead of installing all the software on the computer with XP I upgraded to Windows7 - charge install.

  Keys still don't work - it was a real pain first as my computer was created for ctl + alt + delete to log on and I had to do with the keyboard of the screen - XP - it showed also that numlock performed before and after windows starts.

  The reason why I suspect a virus - my wife was watching an of its tv shows on the line of the country of origin (an another toshiba laptop) and I needed to use this laptop for something else, so I asked to use mine - then we turned off laptops and the morning turned tham back on again once , the other laptop with virus protection AVG reported several hits and this one with Norton (FAMOUS and completely up-to-date) flagged nothing - once I got the screen keyboard.

  Problems with this computer were found after scanning with different antivirus.
  Anyway - I find myself with 4 keys that don't work not on my keyboard (in fact they work after I have connected to the computer for the first time, but I had to hold them in place for a long time - and then the next time I rebooted, not at all and did not since)

  Here, any help would be greatly appreciated, I'm working on this all weekend with no joy at all.

  Thanks in advance.

  Having a virus attack, the Windows files will be destroyed. Try the scan with kaspersky on Nod 32. If not help, reinstall os because it is the best solution in your case.

• Keyboard and mouse did not work properly after the service pack 2 update

  key Board runs very slowly and mouse runs through the screen when it is used. Acer Aspire 5050-3371 came with Vista home

  Hello

  Do you use a touchpad or mouse wired / wireless?

  Your laptop is connected with laptop keyboard?

  I suggest you to check if the keyboard and mouse work will find in safe mode. Follow the steps that will help you perform the following checks:

  Method 1

  a. restart the computer.
  b. start typing the F8 key.
  c. you get early boot option window.

  For more information, see: the boot advanced (including safe mode) options

   

  After the entry into SafeMode Log in your user account and check if the keyboard and mouse are working.

  After you perform method 1 Troubleshooting and if you find the keyboard and the mouse does not work correctly then you can perform the following procedure.

  Method 2:

  You can also perform the clean boot and check if you are able to start successfully. Clean boot will start Windows Vista by using a minimal set of drivers and startup programs and helps eliminate conflicts of third party software.

  The following link has steps showing how to perform the clean boot: http://support.microsoft.com/kb/929135

  Note: Please make sure that the computer is configured to start as usual according to step 7 of the article: how to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7:http://support.microsoft.com/kb/929135.

  Hope the helps of information. Please post back and we do know.

• Satellite A100-785 - after the virus the bus USB and wireless do not work

  Hello
  I have a Satellite A100-785 with Vista 32 bit.

  I installed the Windows updates and another program. My antivirus detected a virus and delete files and now the USB bus and wireless do not work.
  I downloaded and installed a new driver for my model, but it does not work.

  Help, please!

  And, I want to recover the factory setting but I don't have a recovery CD now. How can I restore to factory settings? If cannot repair with the method of mormal and kare without recovery CD.
  See:
  [http://i39.tinypic.com/rw4f8p.jpg]

  Hello

  You should try to remove the devices that they are marked with a yellow exclamation point. Start Notepad, and then install the latest drivers from the Toshiba site.

  If the virus has destroyed an important system files that it s is no longer possible to install a driver and you need to reinstall Windows using the Toshiba recovery disc.

  Did you create the Toshiba Recovery disk? You can do this with the Toshiba recovery disc creator, which is preinstalled on your laptop. Maybe you are able to do this at the moment.
  In addition, you reinstall Windows using the recovery of HARD drive option. So go to the advanced boot menu and select Repair my computer. Some Windows files will be loaded and then you can choose the Toshiba Recovery option and follow the instructions on the screen.

  If you can t create the recovery disk, you must order a new Toshiba directly:
  https://backupmedia.Toshiba.EU/landing.aspx

  Welcome them

• Trackpad/point does not not after the withdrawal of the keyboard

  Earlier today I opened my T510 for maintenance. In doing so, I removed the keyboard. After all together, the trackpoint/trackpad didn't work. This includes the the * beep *-all the buttons of the mouse mouse and trackpad. The trackpad was not yet removed, but I guess that the data connection for through the rest of the keyboard (?).

  I took the keyboard several times to ensure that the connection is secure and verify if physical damage. There was nothing.

  The obvious thing to do here is to replace the keyboard and desperately hope that the problem is not with the connector on the motherboard, but the problem is enough strange (keyboard works, but not the mouse) thatI thought it would be interesting to post here to see if anyone noticed.

  Solved.

  As I mentioned in the last post, the trackpad connects to the motherboard through the cable labled as a speaker in the manual wire (this can be easily seen after removing the keyboard/trackpad of the machine Panel). There is a small latch to hold the cable in place at the end of the mobo. I had mixed the States secured and unsecured for this lock, which apparently broke the connection. That fixed now and everything works.

  It's probably point out expressly that the * beep *-the mouse on the keyboard and mouse buttons do not seem to be depenent on the trackpad is properly plugged in, despite a separate connection to the mobo.

• USB and a targus wireless mouse does not work, even after the help of MS tech.support

  Microsoft Tech. checked my pc online to see if I could connect my Targus mouse and its usb device. He said that I can. I still can't activate it

  Hi DebraKennedyUP,

  1. did you last changes made on your computer before the show?

  2. What is the operating system installed on your computer?

  3 - is the same mouse work on different computers?

  Perform the following troubleshooting steps:

  Method: 1

  Configure the computer to clean boot and check how it works.

  To configure the computer clean boot, follow the steps in the below link:

  How to perform a clean boot

  Note: After checking in the clean boot, follow step: 7 article to reset your computer to normal startup.

  Method: 2

  Run the troubleshooter of material to find exactly the problem.

  Open the hardware and devices Troubleshooter

  Method: 3

  Also, proceed as shown in the following link.

  Hardware devices do not work or are not detected in Windows

  Method: 4

  I suggest you to update the drivers and check how it works.

  Updated a hardware driver that is not working properly

• Photosmart HP 6520 all-in-one: Photosmart HP 6520 Scan to computer function doesn't work is not after the driver download

  After that our latest operating system updated, our HP Photosmart 6520 had scanning problems.  Usually a reboot or as part of the scan on the HP computer would work.  Today, I downloaded the latest driver in the hope that could solve the problem.  Now the scanner is not recognize the computer, and I can't enable analysis of the it function with HP on my Mac utility.  The print feature works very well.   This message I see in the HP utility:

  "The HP software required for the Scan of the computer could not be located on this computer. Please download and install the latest HP recommended software for your device to http://www.hp.com/supportand then try again. »

  I searched HP website, but I can't find anything other than the driver I downloaded for Mac OS X 10.10.

  What can I do to get my scanner up and running again?  Thank you very much for your help!

  Hi @kjnowicki

  I want to help you with your scanning device.

  We will reset the printing system, repair disk permissions, add the printer using the driver and try to start a new search.

  Reset the printing system

  1. Click on the Apple icon ( ), then click on System Preferences.

• Windows Vista is not look right after the virus scan (looks like old fashioned)

  I ran a test and test of computer optimization after what my Windows Vista is very old looking shaped with square blocks and the screen seems also very dark. Can I make the screen brighter, but need to do this each time I start up. But my main thing is to get Windows Vista normal looking again. I tried updates, but not worked.

  Can someone give me some advice please?

  Hello

  I'm curious to know what it was: 'computer optimisation test '.

  Normally, you lose your Vista theme after the graphics drivers are not updated.

  That's why I was wondering what you were doing.

  Try this:

  Go to the website of your computer manufacturer > drivers download Section > then key in your computer model number > find your operating system > find two graphics / video or from the Chipset drivers and download and install.

  __________________________________________

  It would also be a good idea to run the System File Checker tool to see if you have corrupted files

  "How to use the System File Checker tool to fix the files on system missing or corrupted on Windows Vista or Windows 7"

  http://support.Microsoft.com/kb/929833

  Use the (SFC.exe) System File Checker tool to determine which file is causing the problem and then replace the file. To do this, follow these steps:

  1. Open an elevated command prompt. To do this, click Start, click principally made programs, Accessories, right-click guest, and then click run as administrator. If you are prompted for an administrator password or a confirmation, type the password, or click allow.
  2. Type the following command and press ENTER:
     sfc/scannow

     The sfc/scannow command analyzes all protected system files and replaces incorrect versions with appropriate Microsoft versions.

  See you soon.

• Devices may not work properly after the upgrade

  While trying to update, I received this message:
  "These devices does not work after the upgrade.
  Before the upgrade, we recommend that you update the drivers for those devices.
  Cancel the upgrade, open Control Panel and search for
  "update device drivers", or select the instrument manufacturer
  Web site to search for updated drivers.
   
  Storage controllers: controller IDE ASZE9NGB

  I searched Google, Bing and Microsoft and... nothing. Please help me! Thanks in advance!

  This diagnosis you have done to date?
   
  Did you look in Event Viewer?
   
  Error messages?
   
  Please provide details about your current problem.

  We are better able to help you if you help by providing us with as much information as possible...

  Suggestions for asking for help on a site.

  http://support.Microsoft.com/kb/555375

  http://www.CatB.org/~ESR/FAQs/smart-questions.html

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_other-windows_update/what-information-to-post-in-the-Windows-Update/1467f44b-ee27-4F7D-98d7-f1c4b35b3395

• Applications not no projection in all PROGRAMS on the start of Vista after the virus.

  Hello

  My portable computer with windows Vista has recently been infected with a virus that I have now deleted.
  But all my application to 'All programs' files have been deleted.  I managed to download a zip file of the links standard for Vista Home Premium which is my OS and pasted these in the start menu for all users in the C:\ProgramData\Microsoft\Windows\Start Menu.  However, I don't know how to do to back up all my personal applications.
  I really can not re - install all the, they are too many and I am not sure that I have even all disks and downloads at hand to do. The task would be enormous.  Is there a way to solve this in the registry? or any other method? Can someone direct me please?
  I tried to use system restore, but I have nothing but the most recent restore points, and it did not work.  I am also concerned about restoring the registry entries virus files.
  Please can you let me know if something can be done to solve this problem.  I am a user experienced and confident enough in taking a challenge complicated if you are available.
  Look forward to a response, thanks a lot
  John

  Forget the junction points.  They are only for backwards compatibility (and are not called points of junction of the system, only in the documentation of the system).  I don't think that the Start Menu, Documents and Settings folder (the point of junction for your profile among others) will seek to replace the one right that should be there.  I might try it if it was me, but it's not worth the risk for you (it could cause more damage than it solves - and I'm not going to try it just to see if it works).

  It's a shame to system restore because this would probably solve the problem quickly and efficiently.  Perhaps you should consider maintaining that a few points spread over time even if they do not place - you are short of space that you need to restore space?  I didn't know you had only a very current restore point or I have suggested the procedure.

  If you're short on space, here are some suggestions:

  A great many things affect speed and performance, and the amount of space available on your system - especially the existence of various files and which is loaded on the system.  There are ways to handle this in Vista (and that you follow all the suggestions) - and of course the amount and type of RAM and the speed of your processor and motherboard (but I'll just discuss here the software solutions - you can go to your supplier/manufacturer of computers for hardware solutions, if some are available (I) for example, am maxed out at 2 GB of RAM in my motherboard and there is no motherboard better available for my laptop model).

  To enhance your speed, to using Disk Cleanup: http://www.vistax64.com/tutorials/76073-disk-cleanup.html.

  Also do optimization: http://windows.microsoft.com/en-US/windows-vista/Optimize-Windows-Vista-for-better-performance.

  Go to start / search options and type msconfig and enter and then double-click on the program icon that appears.  Go to the Startup tab and uncheck any program that you don't need from start.  This will probably be the majority of the items here - otherwise most of them (some are needed as the AV program but more are there to make open source programs more quickly and make you believe that they are more effective).  This will free up a lot of RAM and a great help to make your system faster (but maybe not as long as you'll be able to see the difference - but maybe according to how many useless stuff loads at startup).

  You can perform some of these tasks (and more that aren't entirely related) using http://onecare.live.com/site/en-us/default.htm (which also seeks the malware).  I do it on a monthly basis only as part of normal maintenance, and I suggest you do the same.  Make sure that you select a full analysis - it will take a few hours (mine can take about 5-6) but can works in the background so start when he has enough time to complete.

  You also want to have good AV programs and HAVE on your system (so no malware running in the background drain resources).  Windows Defender is a good PROGRAM.  The new, free Microsoft Security Essentials http://www.microsoft.com/security_essentials/default.aspx is a great AV / AM program that has one of the least impacts on resources and the performance of the system, according to reliable sources and it does the job very well.  If you are using MSE, you don't need really Defender (but you would with any other AV program).  I suggest also download http://www.malwarebytes.org/mbam.php and it works every month to catch anything that might miss MSE/Defender.

  If you follow these tips, and do this regularly (at least monthly), then I think that you will have faster to a machine as it is able to give material.

  Perhaps one of the recovery programs will work (try Recuva if you have not already - this is a very good).  It is possible that this only works with the data files and not with files system (which would explain why you're having without success) because I never used them to recover before system folders (I have always used the system restore).

  Good luck! Lorien - a - MCSE/MCSA/network + / A +.