Acer laptop4720z dvd burner won't burn DVDs but will burn CD why not
my dvd burner will be burrn cds and some data on disk but do not burn mp3s or my home DVD why not
Hello
1. what operating system do you use?
2 did you receive an error message?
3. have you made changes on your computer?
4. what applications do you use to burn DVDs?
I suggest you to follow the link and run the fixit.
Your CD or DVD drive cannot read or write media
http://support.Microsoft.com/mats/cd_dvd_drive_problems
http://support.Microsoft.com/kb/314060
Tags: Windows
Similar Questions
-
Satellite A30 won't read dvd but will read a cd/cd rom
I have problems with my satellite A30/dvd/cdrw drive (TEAC DW-224th-A), it will not read DVDs but will play CDs and cd rom drive will turn looking for the dvd but it won't find it and when I try to start the dvd menu from my computer it says the empty disks.
I checked that the drive is enabled and it is said that the drive works properly. I also tried DVD originals and copies
It works fine but stopped all of a sudden,
Has anyone advice please!
Hello
Try to remove the drive from Device Manager.
After phone restart the operating system should recognize the drive again.
Maybe it helps. -
CD drive won't burn dvd or read burned dvd but will play store bought dvd
TSSTcorp cd/DVGW-ts-h652m ata device, it's my player to cd for some reason, I can't burn cd/DVDs, but the reader will read these and play them, also it won't read burned DVDs, Noah he reformatted dvd, how can I solve this problem
Hello
Have you tried to close all programs and then insert the disc in the drive?
You have disk problem as the CD/DVD is actually 4 discs in 1 case (burn CD & DVD and CD and DVD read).
Therefore, it is not unusual for 1 or 2 rooms with not so work that others do it properly.Burning at low speed, or by using the master could help. A CD/DVD cleaner might help.
CD have a tolerance + - and you have to write on the side outside their tolerance. They can be given
However, it is generally more economical to replace the disk.Several good info here:
http://Club.myce.com/Notes on the troubleshooting and repair of readers of compact disks and CD-ROM Drives
http://www.repairfaq.org/repair/F_cdfaq7.html#CDFAQ_014-----------------------------------------------------------------------
Try this troubleshooting:
Step 1: Please make all underneath the same if you've done it before as it's often the total of the process which
solves the problem.Try this - Panel - Device Manager - CD/DVD - double-click on the device - driver tab - click
Update the drivers (this will probably do nothing) - then RIGHT click the drive - UNINSTALL - REBOOT
This will refresh the default driver stack. Even if the reader does not appear to continue below.
Then, work your way through these - don't forget the drive might be bad, could be a loose cable or
slight corrosion on the contacts (usually for a laptop) and other issues.Your CD or DVD drive is missing or is not recognized by Windows or other programs
http://support.microsoft.com/kb/314060 - a Mr FixitThe CD drive or the DVD drive does not work as expected on a computer that you upgraded to Windows Vista
http://support.Microsoft.com/kb/929461When you insert a CD or a DVD, Windows Vista may not recognize the disc
http://support.Microsoft.com/kb/939052Your CD or DVD drive cannot read or write media - A Mr Fixit
http://support.Microsoft.com/GP/cd_dvd_drive_problemsCD/DVD drive does not appear in Windows Vista, or you receive this error during the installation of Windows Vista after booting from the DVD (AHCI)
http://support.Microsoft.com/kb/952951
Drive CD - R or CD - RW Drive is not recognized as a recordable device
http://support.Microsoft.com/kb/316529/Hardware devices not detected or not working - A Mr Fixit
http://support.Microsoft.com/GP/hardware_device_problemsAnother possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
ends. Remove and replace, do not just tight. For laptops, you can often clean power and
contacts data with a pencil eraser.Some DVD players do not use the Windows default drivers so check with the manufacturer of system and
manufacturer of device to see if there is a firmware or drivers for your drive if necessary.===============================
Step 2: You have disc problems as the CD/DVD is actually 4 discs in 1 case (CD & DVD burning and)
Playback of CD and DVD). Therefore, it is not unusual for 1 or 2 rooms with not so work that others do it properly.Did you follow the Troubleshooting Guide for the reader who still does not work? There are some registry entries
that the troubleshooter does not, and those who "could" be the cause.Check with your system manufacturer Maker and device for possible firmware updates and the good
Your player registry entries.Here are the keys in my opinion, are those in question - for the reader of CD/DVD subkeys of course that he will be
other subkeys in these keys. Be sure to ask specific keys involved as well as the parameters.HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\IDE
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Hardware Profiles\0001\System\CurrentControlSet\Enum\IDE
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}
-----------------------------------------------------------------------
You can probably find more info here and maybe even registry settings correct for your CD/DVD drive
a person with the same model.Forums - a lot of expert real help
http://Club.myce.com/CD/DVD units
http://www.myce.com/storage/I hope this helps.
Rob - bicycle - Mark Twain said it is good. -
computer is spit back out dvd but will keep and play the game disc
have a dell studio, he started being silly, it will read and play the game disc. partially, it reads the disks if recording information. but it wen I put it in a dvd takes it turns around inside like its gona read but it spits out back. IV run virous scans and updates and I cheak all system files and every thing seems OK Please help
Hello
Check with Dell Support, their online documentation, drivers, diagnostics and ask in their forums
on the problems known.Dell support
http://support.Dell.com/Dell support drivers - product manual & warranty Info (left side) - and much more
http://support.Dell.com/support/index.aspx?c=us&l=en&s=DHSDell forums
http://en.community.Dell.com/forums/----------------
Having too many CD/DVD programs can cause strange problems, especially if they're loading of parts of
themselves at the start because they will be competing for resources. This does not mean that this issue has been
caused by those, however, it's a possibility depending on which and how many you have installed.You have disk problems as the CD/DVD is actually 4 discs in 1 case (CD & DVD burning and)
Playback of CD and DVD). So it is not unusual for parts from 1 or 2 to not work so that others do
correctly.Burning at low speed, or by using the master could help. A CD/DVD cleaner might help.
Brand of the CD or DVD drive can also be the problem. Low quality (cheap brands) are always problematic.
CD/DVDs have a tolerance + - and your can read/write on the edge outside these discs
tolerances. They may be delivered, but it is generally more economical to replace the disk.Several good info here:
http://Club.myce.com/CD/DVD units
http://www.myce.com/storage/Notes on the troubleshooting and repair of readers of compact disks and CD-ROM Drives
http://www.repairfaq.org/repair/F_cdfaq7.html#CDFAQ_014-------------------------------------------------------------
Follow these steps to remove corruption and missing/damaged file system repair or replacement.
Start - type in the search box - find command top - RIGHT CLICK – RUN AS ADMIN
sfc/scannow
How to fix the system files of Windows 7 with the System File Checker
http://www.SevenForums.com/tutorials/1538-SFC-SCANNOW-Command-System-File-Checker.htmlThen run checkdisk (chkdsk).
How to run check disk in Windows 7
http://www.SevenForums.com/tutorials/433-disk-check.html==========================================================
After the foregoing:
References to Vista also apply to Windows 7.
Step 1: Please do all the same underneath if you did some before as is often total
a process that solves the problem.Try this - Panel - Device Manager - CD/DVD - double click on the device - driver tab.
Click on update drivers (this will probably do nothing) - RIGHT click ON the drive - uninstall.
RESTART this will refresh the default driver stack. Even if the reader does not appear to continue
below.
Then, work your way through these - don't forget the drive might be bad, could be a coward
cable or slight corrosion on the contacts (usually for a laptop) and other issues.Your CD or DVD drive is missing or is not recognized by Windows or other programs
http://support.microsoft.com/kb/314060 - a Mr FixitTry this fix manually if the Fixit 314060 does not work
http://www.pchell.com/hardware/cd_drive_error_code_39.shtmlYour CD or DVD drive is missing or is not recognized by Windows or other programs-
a Mr Fixit
http://support.Microsoft.com/kb/982116The DVD player does not work after installing Windows 7
http://support.Microsoft.com/kb/975270/The CD drive or the DVD drive does not work as expected on a computer that you upgraded to
Windows Vista
http://support.Microsoft.com/kb/929461When you insert a CD or a DVD, Windows Vista may not recognize the disc
http://support.Microsoft.com/kb/939052Your CD or DVD drive cannot read or write media - A Mr Fixit
http://support.Microsoft.com/GP/cd_dvd_drive_problemsCD/DVD drive does not appear in Windows Vista, or you receive this error during Windows Vista
Setup after booting from the DVD (AHCI)
http://support.Microsoft.com/kb/952951
Drive CD - R or CD - RW Drive is not recognized as a recordable device
http://support.Microsoft.com/kb/316529/Hardware devices not detected or not working - A Mr Fixit
http://support.Microsoft.com/GP/hardware_device_problemsAnother possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
ends. Remove and replace, do not just tight. For laptops, you can often clean power and
contacts data with a pencil eraser.Some DVD players do not use the Windows default drivers so check with the manufacturer of system and
manufacturer of device to see if there is a firmware or drivers for your drive if necessary.===============================
Step 2: You have disc problems as the CD/DVD is actually 4 discs in 1 case (CD & DVD
Burn and CD and DVD read). So it is not unusual for 1 or 2 operational so that other parts
do it right.Did you follow the Troubleshooting Guide for the reader who still does not work? There are
the entries in registry that the troubleshooter does not solve and those who "might" be the cause.Check with your Maker system and a device for the two possible firmware updates and the
correct registry entries for your car.Here are the keys that I of course are those in question - for the subkeys of the CD/DVD drive
as there will be other subkeys in these keys. Do not forget to ask specific keys involved as well as
the parameters.HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\IDE
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Hardware Profiles\0001\System\CurrentControlSet\Enum\IDE
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}
-----------------------------------------------------------------------
You can probably find more info here and maybe even the exact registry settings for your
CD/DVD drive someone with the same model.Forums - a lot of expert real help
http://Club.myce.com/CD/DVD units
http://www.myce.com/storage/Use DevManView to locate the CD/DVD in the registry (be careful and do a prior Restore Point)
nothing change) - find the DevManView device and then make a right click on it free in RegEdit.DevManView - free - an alternative to the standard Windows Device Manager, which displays
all devices and their properties in flat table, instead of the tree viewer
http://www.NirSoft.NET/utils/device_manager_view.htmlI hope this helps.
Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">->
-
my cd player can read cd/DVDs, but will not recognize a cd for copy/writng? Help
I have 2 drives, both reading and playing, but both say "insert disc" and will not recognize when I insert discs
try to copy videos from hard disk and trying to copy music from the hard drive.
suggestions?
Thank you
Grant
The following links may be worth a visit:
(982116) your CD or DVD drive is missing
or is not recognized by Windows or other programs
http://support.Microsoft.com/kb/982116
(Windows XP / Windows Vista / Windows 7)Your CD or DVD drive cannot read or write media
http://support.Microsoft.com/GP/cd_dvd_drive_problemsGood luck...
-
Media Player or Media Center will not recognize DVDs, but will play CD
I've had my laptop for about a year now. The media play would play a DVD without problem. Up to what a month ago I noticed that it would take more time and more time for the Media Player play a DVD. I can't have the media to listen to anything except a CD. I noticed a rattling when I inserted the DVD. Now he not only recognise a DVD, but when I insert a DVD, nothing will happen. I tried uninstalling the driver rest nothing is that nothing happens. Do I have to replace the whole player. In Media Center, it lists a DVD as being stored in the library, I the HELP JUST DO NOT KNOW WHAT THE DEVIL IS VA ON?
ONE WITH A SOLUTION? NEED HELP.
Hi Roy,
Welcome to the Microsoft community.
Apology for a late reply.
I suggest you TURN the Windows media feature in the list of Windows features in Control Panel. Check the results. Check out the link and follow the steps to do this:
Please let us know the results.
-
You can hear the cd/dvd tent drive to access the dvd, but he just keeps trying without offering me options such as what program to use! I checked for the driver and updates of firmware without result! I also tried the 'fix' function and any other help Windows 7 without success. In the Device Manager, it says all working correctly.
Hello
Thank you for your response.
I suggest you to uninstall and reinstall the driver of DVD in Device Manager.
(a) click Startand then click Control Panel.
(b) click system and Maintenanceand then click System.
(c) in the hardware tab, click Device Manager. If you are prompted for an administrator password or a confirmation, type the password, or click allow.
(d) in Device Manager, expand CD-ROM/DVD-ROM drives, right click on the device CD and DVD and then click on Uninstall.
(e) when you are prompted to confirm that you want to remove the device, click OK.
(f) restart the computer.
After the computer restarts, the drivers will be installed automatically.
You can also search for a driver updated the manufacturer and install the latest version.
Hope this information is useful.
-
I'm running on xp and my media player11 won't play DVDs but will play CD and burn
don't know if the codex is missing or hardware is broken
WMP11 already play DVDs?
Maybe you need a DVD decoder:
(FWIW... it's always a good idea to create a system)
Restore point before installing software or updates)Info about DVD decoders:
Plug-ins for Windows Media Player
http://Windows.Microsoft.com/en-us/Windows/downloads/Windows-Media-Player/plug-ins Or you could try one of the following free media players
who should read DVDs:VLC Media Player
http://www.videolan.org/Media Player Classic
http://www.filehippo.com/download_media_player_classic/
(just unzip and run it... (no installation required)Media Player Classic Home Cinema
http://MajorGeeks.com/Media_Player_Classic_Home_Cinema_d6213.html
(works on XP/Vista/7)Another option would be to download and install one of
the following Codec Packs:* Proceed at your own risk *.
(1) news of CCCP (combined Community Codec Pack)
http://www.CCCP-project.NET/wiki/index.php?title=Main_Page(2) K-Lite Codec Pack (full)
http://www.filehippo.com/download_klite_codec_pack/Good luck...
-
DVD burner does not recognize blank DVDs, but will recognize blank CD?
I read through several similar messages, but none seem to have a solution to my problem. I'm NOT very technically savvy, so this is as much I know:
I have a Dimension E310
It was supposed to come with a cd burner and a dvd burner combo.
The reader says DVD R/RW RW DVD rewritable Compact Disk its Ultra Speed
I was able to successfully burn CDs from itunes, but have not been able to burn any kind of video file. In fact, when I insert a blank dvd in the drive, the computer does not recognize that everything is there.
As I said, I'm not the person most computer savvy in the world. I know how to work with my applications, but I know little about the way in which a computer is set up, so I apologize in advance if my question is ignorant, but I appreciate any help you can give. Thank you in advance.
-
The unit is a HP PAVILION p6107uk desktop pc. When the cd is inserted pc tries to read for about 30 seconds then silence.right click on results of dvd player in windows explorer freezing.as soon the disc is ejected Explorer is ok.apart of the records of restorations that I tried to uninstall the drive and reinstalling, diagnostic tools can not read drive when the cd is inserted , but is very good with dvd.software updated controls say that my dvd drive is up to date. DVD player is a HL-DT-ST-DVD RAM GH40L.
I am considering buying a new dvd player to see if that solves it, but all hoping a met and solved this problem before
The player uses different devices for the CD DVD vs. It could be the laser and/or material for the part CD failed. DVD players are cheap now, so a replacement won't cost you too much. I see that the specifications indicate that the current drive has lightscribe, then choose a replacement that has this feature if necessary.
-
zd7000a (Win XP MCE) DVD drive will write on CD, not DVD
My scanner suddenly stopped writing to DVD. Using Nero, it fails with a generic error message. Using the native ability of Win XP passes the title of car of "DVD / CD + RW" in the window of the Explorer for just 'CD player' if I insert a blank DVD and refuses to let me drop files into the window. I can write to CD fine both using Nero and Win XP. I can play DVDs, as well.
I tried to delete the drive in hardware and re-Startup Manager to force reinstallation of the driver; no help.
Any ideas?
Thanks in advance!
Follow-up for completeness. New drive arrived today, installed without a hitch, just burn a DVD with more than 2 GB of data. Worked like a charm. As a bonus the new drive is twice faster OEM he came with.
Detective Conan.
Thanks again!
-
My Windows 7 will play a DVD, but will not play the DVD-ROM of the drive section.
I can play a DVD movie disc, but when I get to the DVD-ROM portion of the disc I can not get this article to play. Any suggestions? I have Windows 7.
It happens within WMC only? Have you tried the same thing with VLC Player?
-
ACEDR NETBOOK WAS A GIFT WAS SO 7, IM AT A LOSS HAVE 25 KOE DIG KEY CODE BUT LOOKING TO DOWNLOAD 7, 7 IS OPEN CANT FRTURN IT, NDTBOOK IS RUNNING XP RUNS GREAT.
Help, please!
E-mail address is removed from the privacy * or SCOTT. MCMILLEN2GMAIL. OM
Windows Update has nothing to do with the upgrade of Windows. Transfer your question here or contact the Acer Support for assistance: http://social.answers.microsoft.com/Forums/en-US/w7install/threads ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft
-
Why my acer 5336 cannot burn CDs / DVDs on secondary storage (DVD/CD), its leaves is failing or simply the empty disc after burning process took place. It's very frustrating! Help, please. I want my acer to burn CD / DVD. Properties of my acer 5336: CD-ROM/DVD-ROM (standard CD-ROM drivers).
It may be a problem with the software that you use or the laser on the optical drive can no longer work. I recommend performing a factory restore and then try to burn files to a blank DVD-R/CD-RW. I would try to copy certain files and images just as a test.
-
Can anyone help on why my first charge up to 14 will not burn Blu Ray but will burn DVD still 11 first on the same computer has no problems burning Blu Ray or DVD. ? Thank you. RB
What operating system do you use?
What brand of computer are you using (HP, Dell, etc.)? Have you spent at the web site of the manufacturer and installed the drivers from HP, Dell, support of any web site page? Sometimes drivers that Windows installs are not as effective - especially if you have recently upgraded to Windows 10.
There may be other factors, but we will need a lot more information in order to solve the deeper problems.
Maybe you are looking for
-
Salvation; I am trying to download pix from my iPhone on my iMac. It has been so easy with iPhoto or Adobe Bridge. But now, nothing seems to work. Same AirDrop does not work. I use Airdrop often between my laptop and my iMac, but I can't seem to do i
-
How to delete applications on iPhone
How can I delete apps on my iPhone
-
I downloaded PC Studio for my Samsung and got this error. > SetupNew\setup.cpp (135) PAPP: PVENDOR: PGUID: @windows XP Service Pack 3 (2600) IE 8.0.60001.18702 How can I solve this problem?
-
upgrading to the windows xp family of sp1 to sp2
After the upgrade from sp1 to sp2, the pc starts in the start window opening, and then just it recharges in a warm start. does not start in windows continues to reboot back to warm start.
-
I can't find my messages