Acer screen k272hulbmiidp gray

Similar Questions

• 6 put new ones in place. Lower part of the screen is gray / no quick accesskeys?

  I've just set up my new s 6 and the bottom of the screen is gray with no access key. I cannt understand how to change that for the life of me! Update 9.2 and that nothing has changed. What's wrong? I can't extend the screen find the keys that are usually here!

  Thanks for all help on this!

  

  You can drag apps you want here. Press and hold an icon until it starts to squirm. Then, drag it to the bar.

• Screen goes gray with lines

  My Dell Inspiron 3520 screen goes gray with horizontal lines during use. This reminds me of an old television set, except the lines do not scroll. Everything started after I upgraded from 8 to 8.1. I was wondering if anyone had any ideas on how to solve this problem? Thank you

  I agree with the upgrade to windows 8.1 as the origin of the problem. If you check the video card, you will see that it is a 3000 graphics card intel. You will see that the upgrade has changed the driver to one for January 2014. I did a back roll of this driver. On my machine, she restored a driver with date of September 2013. After that the computer was OK all night so I think it solved the problem. Appears there is something wrong with the driver that is loaded with 8.1.

• EFI disk0s1 not mounted. screen shows gray with help file when I restart

  I had these problems with my recent Mac.

  1. it freezes for a few seconds. Then begins to work properly. And then freezes. The beachball keeps spinning and I can't access any of the applications.

  I tried restarting. But came up with another question. The gray screen of the charges and file aid continues to Flash.

  I tried from the recovery mode, but I get the Internet (OS X Lion). I'm under El Capitan. In disk utility, I check and repair the drive. Stop and try again. Now, there are two current icons and off - no logo entry sign and apple. If I'm lucky then after 40-50 seconds, Mac starts up.

  Now, I tried to make the EtreCheck, and he gave me more results for disc

  Disk information: ⓘ

  HTS545050A7E362 disk HARD APPLE disk0: (500,11 GB) (rotation)

  EFI (disk0s1) < not mounted >: 210 MB

  Macintosh HD (disk0s2) /: 499,25 (Go 110,18 free) - 70 errors

  Drive failure!

  Recovery HD (disk0s3) < not mounted > [recovery]: 650 MB

  HL-DT-ST DVD - RW GS41N)

  
  

  That's what worry?

  
  

  What can I do to fix these problems?

  Disk0 unit 1 is not the problem. This is the EFI partition, which is never mounted, because it is used only by the bootstrapper, long before that the file system is initialized.

  Your problem is 70 errors in disk0 tranche 2, the volume Macintosh HD. This hard drive (the entire disc) was his. Dead. in ruins. You need a new drive.

• Why my screen turn gray?

  I have a Dell had it for 2 years and I woke up this morning to lit I always put on the mode "sleep" during the night and he began to blink and suddenly TI turned gray and I find it is difficult to see that I even tried turning the brightness to 100% has not helped please Mary

  The backlight or inverter has failed if the screen does not shine in Mode without failure or power on.

• can not restore correctly hit theme by accident and computer screen went gray

  My Dell was working fine no problem. I have vista.  I went into the control panel under Customize the theme and got confused and selected windows classic.  My main screen turned all gray (by removing all my icons and background).  A friend told me to go back and choose windows vista, I made this gray screen but still the same.  To make matters worse my computer then stopped allowing me to view anything on my screen.  I coud go to start, but I I chose something you would see that flash on the screen as he was trying to open, but he would never open, you would see only listed in the toolbar. At this point I turned off a turned on the computer, allowing access again.  1 prob. This keeps coming and go where I can and cannot click to open things from the start tab.  Prob 2 there are lines of light on dashboard on both sides of the computer that says "tablet pc Input Panel", what is it, and why I can't get rid of it.  Prob 3, I just want to go back to my old screen is possible.

  I went to start search and type rstrui and tried to restore to yesterday.  Process, restarted, but an error came say it has failed.  I tried a 2nd and 3rd times where I couldn't even read the pop up when she came back because we were back to not be able to view anything.  4th test was identical to the first.  How can I restore my computer to how it worked before?

  My Dell was working fine no problem. I have vista.  I went into the control panel under Customize the theme and got confused and selected windows classic.  My main screen turned all gray (by removing all my icons and background).  A friend told me to go back and choose windows vista, I made this gray screen but still the same.  To make matters worse my computer then stopped allowing me to view anything on my screen.  I coud go to start, but I I chose something you would see that flash on the screen as he was trying to open, but he would never open, you would see only listed in the toolbar. At this point I turned off a turned on the computer, allowing access again.  1 prob. This keeps coming and go where I can and cannot click to open things from the start tab.  Prob 2 there are lines of light on dashboard on both sides of the computer that says "tablet pc Input Panel", what is it, and why I can't get rid of it.  Prob 3, I just want to go back to my old screen is possible.

  I went to start search and type rstrui and tried to restore to yesterday.  Process, restarted, but an error came say it has failed.  I tried a 2nd and 3rd times where I couldn't even read the pop up when she came back because we were back to not be able to view anything.  4th test was identical to the first.  How can I restore my computer to how it worked before?

  Hey Missy555

  If you are using norton it will stop system restore

  read the information in the below link on disable norton product anti-forgery protection

  http://Service1.Symantec.com/support/sharedtech.nsf/pfdocs/2005113009323013

  also try to restore the system in safe mode

  Windows Vista

  Using the F8 method:

  1. Restart your computer.
  2. When the computer starts, you will see your computer hardware are listed. When you see this information begins to tap theF8 key repeatedly until you are presented with theBoot Options Advanced Windows Vista.
  3. Select the Safe Mode option with the arrow keys.
  4. Then press enter on your keyboard to start mode without failure of Vista.
  5. To start Windows, you'll be a typical logon screen. Connect to your computer and Vista goes into safe mode.
  6. Do whatever tasks you need and when you are done, reboot to return to normal mode.

  How to use the system restore

  and there is a box to check to see more than 5 days restore points if required

  read this tutorial

  http://www.windowsvistauserguide.com/system_restore.htm

  Walter, the time zone traveller

• "Use all displays in mode full screen" is grayed out?

  Hello..

  I have two monitors on my Leopard system, with a guest of Fedora 11, but the menu item "use of all displays in mode full screen" is always grayed out.

  From what I've seen with Google, no one else on the planet is having this problem.

  Does anyone have any suggestions?

  Thank you!

  It is essential for just about everything... without it, Windows runs without no VMware driver, so not only will there be a drop in performance, but you do not get a large part of the expected functionality (copy - paste between / guest chef, acceleration 3d, folders; printers;)... basically it all depends on the installed VMware Tools...

• Always show full-screen aggregator grayed out when publishing/TOC

  Not sure if the two are related or not. When published with version 5 there is no button to remove the table of contents for the project of the aggregator. I have seen in blogs, is that something only available in version 6? Second, the option full screen is not available as well. I see the box, but it is greyed out in the publishing options.

  Thanks for the help everyone!

  Hi Shawn,

  Welcome to the Adobe Forums.

  You can hide the contents 6 Captivate of aggregator of preferences table but full screen option is grayed out in Captivate 6 while publishing the aggregator.

  In Captivate 5, we cannot disable TOC and the option full screen is also disabled.

  Thank you

  Vikas

• Third screen is grayed out (laptop + 2 extra monitors)

  Hello!

  Using two monitors for video editing for a while now and finally got rid of an old computer and I could save the monitor she (is be the exact model of the extra monitor I use already - Dell 1505FP). My computer is a mobile entertainment pavilion dv4-1465dx. I really wanted to do a 3 wide screen (Dell monitor on laptop from left, embossed in the Middle, Dell monitor on the right), but I've read that most of the consumer level graphics cards can not handle / made this extra monitor, but because I couldn't find the specifications for mine I assumed that since I have available ports I'm able to turn it on. Not to mention that the ethernet and card reader, I have:

  VGA

  This HP port

  HDMI
  ESATA

  2 additional USB ports

  My current attempt use a monitor with a VGA connection and the other with a DVI to HDMI adapter cable. In Control Panel, I can see that the computer recognizes the third screen, but the image is dimmed and shows "disconnect this view." When I try to change it, it just comes back to the same thing and do not apply the changes. I can do all kinds of configurations - but that you are unable to accept all 3 as an extended display.

  In the advanced settings (ctrl + alt + F12) it also doesn't let me all 3 at once, but one monitor arrives as "monitor Dell... "while the other rises as"digital display Dell... ". "Can this cause anyting to do with him?

  Any help would be greatly appreciated. Is what I can do with my current available options or is there something I need to buy to do this?

  Thank you!

  Hello

  A high-end gaming laptop will support 3 monitors (including the main screen). If you want to use the following specifications for 3 monitors OR video editing, you bought a bad machine:

  http://support.HP.com/us-en/document/c01777304

  But you can try:

  http://www.Matrox.com/graphics/en/products/GXM/

  Kind regards.

• Computer HP laptop starts up but screen goes gray

  I have a laptop Windows 8 Hp its two months. I closed the screen last night (not close) and this morning it will not work. The portable sounds as if its marketing, but the screen is grey. If I press F11, it will say F11... Recovery systems, but can not do anything else. I tried to take out the battery and press and hold the button in a minute, but nothing happened. As a student this lappy is my life.

  Hey Hanna82,

  Please contact our technical support at the 800-474-6836. If you call in North America, the number is 1-800-474-6836 and for all other regions click here. They will be happy to help you immediately.

  Thank you.

• I had the virus 'file system' I ran most of MS who removed it... then the screen turned gray and all the icons and files have disappeared... I can't use restore even in safe mode

  I had the virus 'file system' and ran the Microsoft Essentials who kidnapped... Then the screen turned grat and all my tyop desktop icons disappeared and my files... I tried to use the restore but it wouldn't return back or in SafeMode... also, I get a notice that the Task Manager is disabled? How can I turn back?

  Hi David McGeady.

  ·         You are able to open in safe mode Task Manager?

  Follow these methods.

  Method 1: Scan the file system (CFS) auditor to repair corrupted files.

  Description of Windows XP and Windows Server 2003 System File Checker (Sfc.exe)

  http://support.Microsoft.com/kb/310747

  Method 2: It seems that the virus is still there. Performs a search using the Microsoft safety scanner.

  http://www.Microsoft.com/security/scanner/en-us/default.aspx

  Note: If bad sectors are found in the hard drive, then it could try to fix this particular sector. If you have any data on that, it can get lost.

  Method 3: Create a new user account.

  How to create and configure user accounts in Windows XP

  http://support.Microsoft.com/kb/279783

  If the problem is resolved in a new user account, and then follow the article on how to fix a corrupted user account.

  How to copy data from a corrupted to a new profile in Windows XP user profile

  http://support.Microsoft.com/kb/811151

• Photoshop CS3 10.0.1 - launch crashes on the registration screen, all grayed out menu items

  I use Adobe Photoshop CS3 10.0.1.

  At the launch, opens the window marked "Adobe Design Suite Premium CS3" - it is only filled with white and no text or graphics (I think that's usually the window asking me if I want to register, which always comes back when I run the program (rather annoying in itself).  However, it seems now that the launch is "interferes" in this window, like, even the program starts, all the menus are dimmed, and I can't open any files or anything.  Also, the above window has only the 'reduce' yellow button available at the top left, so I cannot close or otherwise get rid of it.  Since even the Quit function is grayed out, I have to leave the program with a force quit.  In addition, this same thing happens in my other CS3 programs (In Design) as well.

  I tried trashing the plist of photoshop (com.adobe.photoshop.plist) and also the file com.adobe.118.registration, which had no effect.

  Can any advice on how I fix?

  Thank you!

  I hope that this solution will work for you:

  http://forums.Adobe.com/thread/1339100?TSTART=30

• Acrobat XI - personalize / create the new set of tools.  I want to add tools to Mark Up, but the record button at the bottom of the screen is gray evolve, and I can't seem to save my changes.  What gives?  Need these tools to increase!

  I tried different routes to add the standard brand of tools to my page, but it doesn't seem to be a way to save the change.  Never had this problem before.  I'm working on a Surface Pro 2.

  Hi smartguy927,

  Please open Acrobat, go to the menu help & "Repair Installation", also check the updates, if any please install.

  Now, try to reproduce the problem.

  Kind regards

  Nicos

• HP Pavilion 15: Screen must COMPLETELY gray - Start Up - cut

  Product no.: P3C83PA

  Serial number: (deleted content)

  Edition: Windows 10 home

  System type: 64-bit

  Screen - TOTALLY GRAY - you can't see a thing of START UP - to SHUT DOWN

  
  
  Kind regards
  Sonia McMahon

  @SoniaM
  Welcome to the HP Forums
  
  I would like to take a moment and thank you for the use of this forum, it is a great place to find answers.
  You have the best experience on the HP forum, you can also visit our Guide of Forums from HP for the first time here? Learn how to post and much more.
  
  If I understand correctly there is a gray tint/background on the start screen, stop,

  Don't worry though, as I have a few steps to the issue and find a solution more.

  Please try another monitor to understand if it is a hardware or a software failure,
  If the lines do not appear on the other monitor, replace the faceplate on your computer,
  If there are lines on the monitor/TV replacing, re-install the graphics card drivers and update of HP's official website: click here

  If you do not have another monitor, I recommend you to check if the lines appear on the BIOS screen (restart the computer and press F10 to access BIOS)

  This would confirm if it is a hardware failure or a problem with the graphics card drivers, so we can reinstall and update drivers to fix the problem, as mentioned above.

  If the problem persists on the BIOS as well, please try with a TV to identify if it's the LCD or the mother/video card failure,

  If the problem occurred after an accident (such as a fall on the ground, the liquid spilled on it, etc.) that there could be a hardware failure and in this case, you may need to get the computer repaired by HP (it might have involved load if the PC is not covered by the protection against accidental damage plan)

  Response with the result of the above, for help.

  I wish you a good day
  And do not hesitate to ask questions that this forum has some of the best people in the world, available and ready to help.
  Kind regards

• iMac mid 2011, gray screen of death!

  Hi all! (Sorry my spelling Im Danish)

  I have an iMac mid 2011, 2 TB HD, 16 GB of Ram and a video card AMD Radeon HD 6970 M 2 GB. My problem is the gray screen of death! After starting, I see the Apple logo and progress bar. When the progress bar stops, the screen goes gray and stops loading. I tried the following.

  1. Reset the PRAM og MSC
  2. Boot in single-user mode and fsck - fy
  3. Internet starts form Apple Hardware Test - no error at all!
  4. I tried starting in safe mode, I see the logo and progress bar, but it ends with the grey screen of death
  5. Tried to start with only the original RAM
  6. Tried to start without anny perihperal eqiptment (keyboard, mouse, ect.)
  7. Tried to start mode of recovery and a USB stick and an installation DVD, I see the logo and progress bar, but it ends with the grey screen of death
  8. Tried to do an internet restotre of Apple, I see the logo and progress bar, but it ends with the grey screen of death
  9. Began the iMac in target disk mode and got access to another iMac. A ran the disc utilities and first aid, always on the go!
  10. Started the iMac in target disk mode and made a full HARD disk cloth! Make new partitions tree and a clean install of the other iMac. And after that, the iMac problem still won't start!
  11. I can boot from HARD drive of the problem (in the mode of target diks) iMac via another iMac, so I guess the drive in the iMac problem is in working condition
  12. I also assume that the screen (video card) on the iMacis problem at work order due to the fact, that I see the Apple Start logo and progressbar. As well as the Apple Hardware Test run via the Internet (no video error)

  Anny surgestions what to do? My iMac is dead?

  The very best regards Dan

  Although this program has expired may want to investigate on the iMac (27-inch): AMD Radeon 6970 M video card replacement - Apple Support program