ACS 5.3 assign static IP address according to authenticated user

Similar Questions

• WRT54G static assignment of IP addresses?

  Hello everyone, I have a WRT54G v4 (FW 4.21.1) router wireless and I am trying to configure to assign static IP addresses to my devices.  I have two wired devices, and seven wireless devices and IP addresses are constantly evolving. This is normally no big deal, one of the wired devices is my printer (connected via a cable etherner). The only way I can install this printer to devices is to a standard TCP/IP installation, using the IP address assigned automatically. My question is, can I assign one address of the printer so that I can install it on the rest of devices with an address? Or do I have to assign an address to each machine? And how even statically assign? I know how to connect on the router and am familiar with the integrated navigation page, but I do not see a table of MAC addresses anywhere. I have the latest firmware as well. Thank you in advance for the answers!

  The WRT54G does not support a DHCP reservation. You set a static IP address on the printer. I have not heard a network printer on which you cannot set a static IP address...

• Assign a static IP address via DHCP based on the Mac address of the virtual machine

  Hi all

  It is especially a feature request, as I'm sure that it is not currently possible to do what I want to do...

  I would like to be able to assign static IP addresses to VM without having to manually configure the network settings of the virtual machine directly. I want to be able to do it from the DHCP settings in the virtual network Editor.

  Most of the routers DHCP allow this. They give an IP address through DHCP based on the MAC address of the client. This means that the customer is concerned that he receives a regular IP DHCP address, but it is never change.

  DHCP is the default option for all OS this makes things much easier to manage, as IP addresses is assigned in the same way, in one place for all DHCP clients, regardless of the client operating system, and without having to manually keep track of which the IP is assigned to which customers etc..

  Also AFAIK at least for Ubuntu, you cannot assign a static IP address without having to also statically assign to the DNS server. It is only the IP address I need to be static, so I prefer not to have to worry about manually assign the DNS server.

  I can just kind of fudge making the really long DHCP lease duration, but the maximum is 99 days only, so finally addresses are going to change, that would mean a whole bunch of reconfiguration for VM services, etc..

  Does anyone know if the workstation 9 has this ability? I am currently on version 8, but I would probably upgrade this function only if she can do it.

  If there is no way to do what I want to directly through the virtual network Editor, can anyone recommend a way to do this, perhaps using Guest only network and then, by running a kind of services to the 3rd party NAT and DHCP on the host?

  Thank you

  Eugene

  There is no GUI option to get what you are looking for, but you can do it manually. Please take a look at Re: assign a static IP to guest with network adapter NAT Virt? where I posted an example.

  André

• Error in administration panel and a Question about static IP addresses

  Because it seems to be nowhere else to report errors in the latest generation of Linksys router firmwares, I thought that the forums may be the best place.

  If you use the remote access to your router Administration Management console, then saving the changes are sent to the

  The page "your settings have been saved successfully.". When you click cancel it successfully attempts route to the appropriate host name but does not consider the port used. Therefore, unless you have your GPMC hosted on port 80, he's not taking you back in the right place.

  This is especially a gene.

  My question is that I wonder if it is possible to assign static IP addresses in the router.

  On my old routers from Linksys (much older) (before Cisco them redeemed), you can easily assign static IP.

  I can't find a way to deal with the new generations.  All suggestions is recommended to give the static IP of the

  network devices themselves, but problems on modern mobile devices which don't let you do,

  for laptops that are introduced in a large number of different networks, it becomes an annoyance to change these settings manually.

  --

  I have a router EA4500.

  You want to assign a specific ip address to your computer/network through the router devices? You can use this router DHCP reservation feature.

  "A DHCP reservation is a permanent IP address assignment.  This is a specific IP address within a DHCP scope that is permanently reserved leased to a specific DHCP client. »

  Please visit this link:

  http://www6.nohold.NET/Cisco2/UKP.aspx?VW=1&docid=71dac52653fa4944ae5e4f94ebdf9586_17362.XML&PID=80&...

• 4400 DMP cannot change static ip address

  Hello world:

  I have 4 DMP and I want to assign a static ip address.

  When switched on for the first time take IP address from a dhcp pool, after I disabled the addressing dynamic ip, unanswered.
  If I update screen apparently the changes are made, I then save and restart.

  When DMP turns once again, the dinamic ip address is enableb.

  
  Did someone had a similar problem, we need an update.

  Concerning

  Hello Aurelio,

  Not sure that this code that you run on the DMP, but the symptoms appear to be similar to the DDT #.

  CSCti98801

  Symptom: The following error message is displayed : "Network Error. Please check your connections" Conditions: Assigning static IP address to the DMP(firmware 5.2.1) without using the "DOMAIN NAME" Workaround: Populate the Domain name field with the correct domain name. 

  Thank you

  Sagar Dhanrale

• Cannot get internet static IP address

  Hi, I put several new Win7 PC in an office that replace Win XP PC. I need to use static IP addresses on all of the PCs, as it is required to access the Unix server. Start of the new PC with internet access very well, but when I assign static IP addresses, they have more internet. My IP address, DNS server, gateway, etc. are all correct and identical to what is plugged into the PC XP (except IP address of course). Even if the new PC do not have internet access, they can connect with the Unix server and other PCs on the working group. When I diagnose the problem I get the answer: "your computer seems to be configured correctly, but the device or resource (DNS server) is not responding." All the XP computers using the static IP address and have the internet very well. Yes, I already tried to clear the DNS cache.

  Hello

  As you work on a domain network, the question would be better suited on the TechNet support forum.

  I suggest you to check with TechNet support for more information.

  http://social.technet.Microsoft.com/forums/en-us/newThread?category=&Forum

• How to assign static ip to 1131AG Lightweight Access Point before register you for the controller

  Hello

  I have controller Wireless LAN that is installed at the head office, we have allowed H-harvest so that the remote access can be registered with headquarters controller.

  Now, I have an access point to one of the remote site now, I want to give a static IP address to the AP through that console too, before saving the controller.

  I have the console with sub name:

  ...... MAC address... >

  But if I type any command to assign the IP address, it displays the error "command disabled."

  I join calrification details.

  I know that I can connect to this access point to the headquarters LAN and registered with WLC and then via WLC GUI, I can assign static IP address, but I need solution to assign a static until you save to WLC IP not.

  I will be obliged if I get a solution

  Hi Vinod,

  problem solved?

  Concerning

  Surendra

  Please do not forget to note the useful messages...

• Using static IP addresses with Virtual Machines

  I am stable and ESXi assessment and thus have an independent network to a server, the switch and the laptop (as a system admin). Being a newbie to VM I have not had the time to explore on the web, etc.!

  Problem is that I do not have a DHCP server, but each time the virtual machine at the start of the installation of the OS program, etc., that he tries to use...

  Is there an easy way to temporarily disable DHCP and assign static IP addresses to virtual machines? I look at the docs, this forum, etc... but I must be missing something.

  Thank you

  Date of arrival:

  -If the CD is bootable

  -the virtual CD-ROM is connected to the host ('Connected' and 'Connect' to power on is enabled)

  -the virtual CD-ROM points to your source (ISO, physical CD-ROM)

  Visit this link on how to deal with the virtual CD-ROM: http://pubs.vmware.com/vi3i_e35u2/admin/BSA_Configuring_VMs.16.6.html

  If you found this information useful, please consider awarding points to 'Correct' or 'Useful' responses Thank you!!

  AWo

  VCP / vEXPERT 2009

  Published by AWo

• How to use ACS 5.2 to create a static ip address user for remote access VPN

  Hi all

  I have the problem. Please help me.

  Initially, I use ACS 4.2 to create the static ip address for VPN remote access user, it's easy, configuration simply to the user defined > address assignment IP Client > assign the static IP address, but when I use ACS 5.2 I don't ' t know how to do.

  I'm trying to add the IPv4 address attribute to the user to read "how to use 5.2 ACS", it says this:

  1Ajouter step to attribute a static IP address to the user attribute dictionary internal:

  Step 2select System Administration > Configuration > dictionaries > identity > internal users.

  Step 3click create.

  Static IP attribute by step 4Ajouter.

  5selectionnez users and identity of the stage stores > internal identity stores > users.

  6Click step create.

  Step 7Edit static IP attribute of the user.

  I just did, but this isn't a job. When I use EasyVPN client to connect to ASA 5520, user could the success of authentication but will not get the static IP I set up on internal users, so the tunnel put in place failed. I'm trying to configure a pool of IP on ASA for ACS users get the IP and customer EasyVPN allows you to connect with ASA, everything is OK, the user authenticates successed.but when I kill IP pool coufigurations and use the "add a static IP address to the user 'configurations, EzVPN are omitted.

  so, what should I do, if anyboby knows how to use ACS 5.2 to create a user for ip address static for remote access VPN, to say please.

  Wait for you answer, no question right or not, please answer, thank you.

  There are a few extra steps to ensure that the static address defined for the user is returned in the Access-Accept. See the instuctions in the two slides attached

• Static IP address assignment to a device? (An XBox)

  I'm trying to set up my XBox One to broadcast remote but I am completely ignorant when it comes to networking and rely the economy on the default settings. There seem to be three main parts to this process described here:

  - Port forwarding (which was explained by DexterJB. (Thank you!)

  -Allocating an address static IP to the device (This step)

  - and implementation of dynamic DNS

  I was wondering if someone would be willing to walk me through step of assigning a static IP address to a device, which in this case is my XBox One.

  I really wanted to know that for a while for other devices, but do not know if it is a thing of router or a computer thing. I'd appreciate any help.

  Hi @varxtis,

  You are welcome!

  Instead of setting a static IP address for your XBOX, you can make a reservation address so that the XBOX will have a compatible IP for port forwarding you have done. You can refer to the link below for the steps on how to do it.

  http://KB.NETGEAR.com/app/answers/detail/A_ID/24091

  Kind regards

  Dexter

  The community team

• static IP address assignment to TiVo on BEFSR41 router

  Hello

  I'm trying to put in place a couple of TiVo cable already on my home network so I can 'see' on my Mac using the TiVo Express of Toast Titanium function and copy the TiVo on my Mac programs.   TiVo technical support suggested that the problem is that my Mac IP address is 198.162.1.100 (assigned automatically) and for some reason some of my TiVo is on 198.162.0.2 et.0.3.  They suggested that I have manually assign a static IP address for the for put them in 'sync' with my Mac address - that is to say, something in the range 198.152.1.xxx of TiVo.

  I was able to assign a static IP address of 198.162.1.109 to the head of the TiVo (and my Mac is still not see it), but I received an error message when I tried to assign 198.162.1.110 to the other TiVo.   Technical support suggested I check with you on assignment of the IP address via the router.  Can you tell me if this is possible and if so, how?

  Thank you!

  If the TiVo is Gets an IP 192.168.0.2 or similar when using dynamic/DHCP/Auto IP addresses means the TiVo is connected to a different router or get an IP address from another DHCP server.

  1. Please check your wiring. Your modem should connect to the internet, the port of the BEF everything is connected to the BEF. If the modem has additional LAN ports, a modem/router combo device. Do not use additional ports on the modem/router combo.

  2. If wiring is OK, as previously indicated another reason for a 192.168.0.2 automatic address IP sharing a computer inside your network that has been configured for an internet connection. With internet connection sharing you can share an internet connection through this computer. To do this, the computer will assign 192.168.0. * IP addresses on its side LAN. Please check your computers if there is one that has internet connection sharing enabled.

• Spectrum of HP x 360: how to assign the static IP address

  Seeks to use my Wi - Fi business, I need to use a static IP address, as well as the WPA/WPA2 PSK security password.  I can't find where to enter the static IP address.  I think I may also need to modify the DNS 1 address and gateway.  Can tell me where to access these settings in any case? Thank you!

  My Wi - Fi works perfectly at home, which does not use a static IP address.  Also, the laptop shows the work of network WiFi SSID and tries to connect to it, but can't since I did put in the settings above.

  @BlueCyclone

  Take a look at the following: Static WiFi IP address

  When you see a post that will help you,

  Who inspires you, gives a cool idea,

  Or you learn something new.

  Click the 'Thumbs Up' on this post.

  My answer-click accept as Solution to help others find answers.

• Only 1 of the 2 computers in my LAN recognizes my static IP address assigned by my ISP - HELP!

  I have an IP address from my ISP, but only one of the two computers in my LAN presents this static IP address in the "ipconfig" and it connects to the internet, the other computer Watch has "169.254.XXX.XXX' IP address and does not connect to the internet.  How can I fix it? I don't know much about the TCP/IP settings.  OS is XP Pro SP3.  I have a DSL router from single port connected to a simple switch 5 ports, then two CAT5 cables will switch on both computers.

  Thanks for your help!

  derisk

  Hello

  Two computers cannot connect to the same connection using the same IP address. Each computer on the network must have its own unique IP address.

  You need to get a cable/DSL router. Configure the WAN port (Internet) side with your static IP address and connect all the computers the and other equipment network on the side of the router LAN.

  Generally, it looks like this, http://www.ezlan.net/network/router.jpg

  P.S. You don't need to use the wireless if you do not, it is very difficult to find a new wireless router.

  Jack-MVP Windows Networking. WWW.EZLAN.NET

• Tutorial: Can't stay connected via WifI? Try to assign a static IP address.

  
  

  Very often, people have problems with their wireless routers give up connection to their HP printers. With the help of the video above should help you set up a static IP address that can solve this problem.

• Ubuntu not guest no internet connection when a static ip address is assigned to host windows 7

  Good day/night everyone

  I really need help;

  I am running vmware workstation 9 Windows 7, my guest OS is ubuntu 12.10.

  I'm able to get to the internet when you use the dhcp on my NETWORK (host) card, but can't go anywhere by using a static ip address on the same NIC...

  What settings should I use in order to have working...

  Thank you in advance...

  Doesn't look like to me your /etc/resolv.conf file has been loaded correctly. I don't see your name in there servers.

  Assuming you can get ping on Internet via IP (i.e. use 74.125.140.102 to ping or connect to Google).

  I think I'll try editing this file (like su) and adding:

  nameserver A.B.C.z

  nameserver 8.8.8.8

  It will get overwritten the next time that you start but will allow you to test.

  Mine looks like this:

  # Glibc resolver (3) generated by resolvconf (8) in the file /etc/resolv.conf Dynamics (5)
  # DO NOT EDIT THIS FILE BY HAND--YOUR CHANGES WILL BE OVERWRITTEN
  # OpenDNS rescue (configured by Linux Mint in etc/resolvconf/resolv.conf.d/tail).
  Nameservers 208.67.222.222
  NameServer 208.67.220.220

  Lou