ACS 5.3 vmware Workstation Ubuntu

Hello

I managed to install ACS 5.3 on vmware 8.0.4 (Ubuntu 12.04).

I can connect but I have some fatal errors from the server ({0} or 500) when you work wihthin access policies.

I can not change (or same) selection of selection of unique result of selection of the rule result. That triggered the error message.

My question:

VMware workstation is really OK 5.x (I got the same errors with 5.1 and 5.2 even on windows 7 / vmware workstation 9)?

Best regards.

Vincent.

Thank you for following it upwards. + 5.

Tarik Admani
* Please note the useful messages *.

Tags: Cisco Security

Similar Questions

  • Mouse USB and keyboard problems in VMWare Workstation / Ubuntu 8.10

    I am running VMWare Workstation for Linux version 6.5.0 build 118166

    My host is Ubuntu 8.10 / 2.6.27 - 7-generic and I am hosting another instance of the same operating system on the same machine.

    The problem I see is that the keyboard and mouse misbehave / erratic from the host machine. It is a multimedia keyboard 1.1 Microsoft wireless

    There are essentially two problems:

    (1) dedicated cursor keys / pageup / to / home / delete do not work properly. For example, PageUp wants to take a screenshot.

    (2) the mouse seems slow to recognize clicks / trolling. For example, if I click on a tab in Firefox and move immediately, the tab starts to drag. Even if I click on an image and then move the mouse - drag is initiated.

    I tried several combinations of keyboard layout in the case of Ubuntu comments does not. No problems of this nature in the host, or an instance of XP comments.

    Any suggestions?

    Workaround KB 1007439 make a difference?

  • ACS 5.4 installation on vmware workstation

    Hi all

    is it possible to install cisco acs 5.4 on vmware workstation 8?

    Thank you

    Pellen

    Yes.

    Check this box:

    https://supportforums.Cisco.com/message/3714114

    Rating of useful answers is more useful to say "thank you".

  • VMWare Workstation 12 and 18 of Linux Mint (Ubuntu 16.04) and vmware tools or open-vmware-tools

    I created a new virtual machine using VMWare Workstation 12.1.1 build-3770994 with a guest OS from Linux Mint 18 (which is built on top of Ubuntu 16.04). I have two monitors on my system, the two 2560 x 1440. I am unable to get this virtual machine Linux Mint 18 to cover all of my two monitors when I disable "Accelerate 3D graphics" in my vm settings, I get an error. I have another Linux Mint 17 VM running on the same VMWare Workstation 12 on the same host machine from Windows 10 and it is able to expand on my two monitors very well with "Accelerate 3D graphics" disabled, but he does not open-vmware-tools.

    I have read instructions telling me to install open-vm-Tools-Office in this guest operating system of Linux Mint 18. I did it. Then I restart the guest operating system. When starting, I can click on 'Enter full screen mode' in my menu of VMWare Workstation, and the guest OS has a monitor as expected. When I then click on "Cycle multiple monitors", I get the following error. "The virtual machine could not be changed to the selected screen layout. If you add a monitor to the host computer, you must turn off and turn on the virtual machine to use this monitor. »

    vmware-monitors-error.jpg

    I can optimize my VM to automatic adjustment, only one of my two screens, but not both. I tried to uninstall and reinstall open-vm-tools, open-vm-tools-desktop and restart. I tried to use /vmware-tools-distrib/vmware-install.pl's original vmware tools and who does not work either.

    In my vmware.log, I get these two lines that occur when I get the above error.

    2016 07-12 T 15: 43:19.068 - 06:00 | MKS | I125: ToolsSetDisplayTopology: send rpcMsg = 1 DisplayTopology_Set, 0 0 2560 1440

    2016 07-12 T 15: 43:24.768 - 06:00 | MKS | I125: ToolsSetDisplayTopology: rpcMsg sending = DisplayTopology_Set 2, 0 0 2560 1440, 2560 0 2560 1440

    2016 07-12 T 15: 43:24.853 - 06:00 | vCPU-1 | I125: TOOLS of the call to DisplayTopology_Set failed.

    When I activate "Accelerate 3D graphics" with the configuration described above, I am able to use both of my monitors. Why is this the case?

    I think remember having to disable "Accelerate 3D graphics" in my Linux Mint 17 comments vm because it would crash randomly. I try to run this VM Linux Mint 18 with 3D acceleration and see if it crashes, but why is there a difference with spanning multiple monitors?

    Thank you.

    I didn't experience this problem for a few weeks. I don't have a definitive answer to my original problem.

    I installed Mate instead of cinnamon 3 to my MINT 18. Then, I created a new VM with Ubuntu Gnome 3 16.04 running as the OF. I did have problems with both approaches. I also tried using Firefox as my main browser instead of Chrome, as I read that Chrome can have problems of memory. It could be a combination of several of these changes that have allowed me to work without problems.

    Knowing what I know now, I think the move away from cinnamon 3 is what seems to have fixed my problems. I can certainly say that you use Firefox consumes less memory, as I can monitor the monitor system under Ubuntu. Chrome would eventually eat all my system memory, that I could see. The extent of the why? I'm not sure at this point.

  • 15 Ubuntu won't start in VMware workstation 12 after a recent update of Ubuntu

    I'm quite new to the environment virtual system and linux. Someone could me help on my question below?

    I have a virtual system installed using VMware workstation 12. It works fine, until the upgrade of Ubuntu this morning.

    I have no idea what the update installed.

    After the required reboot, Windows VMware has always stop a black page.

    Before everything, there were some posts that I think they should be useful to target the issue here.

    reboot message.png

    He said:

    SMbus host controller not activated!

    No valid rapl area found within the package 0

    Thank you very much for your help!

    -Ninggang

    I found a solution!

    There is problem of ubuntu, new kernel is bad and it's a bug.

    To start again just hold SHIFT while your machine virtual machine to the menu shows ubuntu boot.

    Select Advanced, then choose more old kernel version and that's all.

    After you restart your virtual machine it always start on black screen, you need to delete newes kernel version linux-headers - 4.2.0 - 30 to begin on the old version and problem SOLVED!

    remove the kernel:

    sudo apt-get remove linux-image-4.2.0-30-generic
    sudo update-grub2

    reboot.

  • VMware Workstation 11 Pro doesn't work on Ubuntu 15.10 x 64.

    Hello

    I used Ubntu 15.04 x 64 as the host for VMware Workstation 11 Pro. It was working fine.

    I've upgraded to Ubuntu 15.10 x 64, and now my computer does not open.

    When I try vmware-Installer:

    $ vmware-Installer

    GTK-Message: could not load module '-gtk-module unity ": libunity-gtk - module.so: Nao e possible open land of objetos compartilhado: land UO diretorio nao found

    (vmware - install .py: 5489): Gtk-WARNING *: Nao faith possible service a tool of temas no module_path: "murrine"

    ...

    ...

    ...

    GTK-Message: could not load module 'canberra-gtk-module': libcanberra-gtk - module.so: Nao e possible open objetos compartilhado land: land UO diretorio nao sown

    $ vmware-Installer - l

    Product product name version

    ==================== ====================

    VMware-workstation 11.1.2.2780323

    How to solve this problem, please?

    Hello

    The problem has been resolved by the release of VMware Workstation 11.1.3:

    $ sudo /etc/init.d/vmware status
Module vmmon loaded
Module vmnet loaded

$ sudo /etc/init.d/vmware stop
Stopping VMware services:
   VMware Authentication Daemon                                        done
   VM communication interface socket family                            done
   Virtual machine communication interface                             done
   Virtual machine monitor                                             done
   Blocking file system                                                done

$ sudo /etc/init.d/vmware start
Starting VMware services:
   Virtual machine monitor                                             done
   Virtual machine communication interface                             done
   VM communication interface socket family                            done
   Blocking file system                                                done
   Virtual ethernet                                                    done
   VMware Authentication Daemon                                        done
   Shared Memory Available                                             done

$ vmware-installer -t
Component Name                              Component Long Name                                 Component Version
=========================================== =================================================== ====================
vmware-installer                            VMware Installer                                    2.1.0.2758308
vmware-player-setup                         VMware Player Setup                                 7.1.3.3206955
vmware-vmx                                  VMware VMX                                          7.1.3.3206955
vmware-vix-core                             VMware VIX Core for Linux                           1.14.4.3206955
vmware-network-editor                       VMware Network Editor                               11.1.3.3206955
vmware-network-editor-ui                    VMware Network Editor User Interface                11.1.3.3206955
vmware-tools-netware                        VMware Tools for Netware                            9.9.4.3206955
vmware-tools-windows                        VMware Tools for Windows                            9.9.4.3206955
vmware-tools-winPre2k                       VMware Tools for Windows (Pre 2000)                 9.9.4.3206955
vmware-tools-freebsd                        VMware Tools for FreeBSD                            9.9.4.3206955
vmware-tools-solaris                        VMware Tools for Solaris                            9.9.4.3206955
vmware-tools-linux                          VMware Tools for Linux                              9.9.4.3206955
vmware-usbarbitrator                        VMware USB Arbitrator                               14.1.5.3206955
vmware-player-app                           VMware Player Application                           7.1.3.3206955
vmware-vix-lib-Workstation1100andvSphere600 VMware VIX Workstation-11.0.0-and-vSphere-6.0.0 Lib 1.14.4.3206955
vmware-workstation-server                   VMware Workstation Server                           11.1.3.3206955
vmware-ovftool                              VMware OVF Tool component for Linux                 4.1.0.2982904
vmware-vprobe                               VMware vProbe                                       7.1.3.3206955
vmware-workstation                          VMware Workstation                                  11.1.3.3206955      

$ vmware-installer -l
Product Name         Product Version
==================== ====================
vmware-workstation   11.1.3.3206955

  • 2.04 Ubuntu comments on VMware Workstation 9 under Win7 can't see ext4 USB drive

    Comments from 2.04 Ubuntu on VMware Workstation 9 under Win7: on computer A trivially, I connected to an out-of-the-box 64 GB USB drive formatted for VFAT on Ubuntu in a VM. I re-init'ed the player for ext4 (mkfs.ext4), mounted, drop a bunch of stuff on him (which took awhile), he dismounted and walked away. The next day, identically configured computer B, I inserted the USB key. Natch, Win7 may not go up because it does not ext4. But Ubuntu don't see either, so I can't be installed. Do not see under removable devices, no small icon bottom left of the screen of VMware, nothing in the settings menus or properties, etc. I think it's just me being a noob to VMware, but it seems that Ubuntu under VMware Workstation 9 cannot see the drive unless Win7 can go up. Seems unlikely. KB searching, Googling, etc. produce many unrelated things. Ideas? AdvTHANKSance.

    Here is the final answer: works great on an earlier version of VMware Workstation 9 on one of the Windows 7 of my client machines, it didn't work on my Windows 7 computer. I upgraded to VMware Workstation 10 on my Windows 7 computer, and now it works perfectly. If I call you this a bug in this version later 9 which was set at 10. Could also be had I simply uninstalled 9 and reinstalled which would have fixed it too. But I'll never know.

  • How to add a second hard drive Ubuntu Server, that runs on vmware workstation 9

    Hello

    I am running vmware workstation on windows 9 8, and I installed Ubuntu 12.10 as a virtual machine on my SSD. I installed a second hard drive in the machine and use the "Add a HDD" feature on vmware workstation to add and pre-allocate space. The problem is that the drive does not appear in Ubuntu. I have checked/Media and / dev, I expected to see something like /sda *. It is a procedural step, I missed it, please help!

    Do I have to mount the drive in a special way? How can I check if it is properly attached?

    Thank you!

    What you said so far, it's like adding a second physical drive to a physical computer and the operating system cannot access until it was partitioned and formatted, and then it can be mounted.  To do the same thing in a VM!

  • Workstation 8 vmware-workstation-server works not not on Ubuntu 11.10

    Hi people:

    Just, I have upgraded my Ubuntu 10.10 to 11.10 and replaced VMWare Server 2.0 with Workstation 8.02.  It seems that the vmware-workstation-server service is not running.  I'm unable to connect from a web page and the application vmware itself is not able to connect.  When I try to activate the dialog application vmware service I get the following messages in the terminal window where I ran vmware:

    update root@naplesubuntu:~#-rc.d: WARNING: /etc/init.d/vmware-workstation-server LSB missing information
    update - see rc.d: < http://wiki.debian.org/LSBInitScripts >
    Adding system for etc/init.d/vmware-workstation-server start...
    /etc/rc0.d/K01vmware-workstation-server->... /init.d/VMware-Workstation-Server
    /etc/RC6.d/K01vmware-workstation-server->... /init.d/VMware-Workstation-Server
    /etc/RC2.d/S03vmware-workstation-server->... /init.d/VMware-Workstation-Server
    /etc/rc3.d/S03vmware-workstation-server->... /init.d/VMware-Workstation-Server
    /etc/RC4.d/S03vmware-workstation-server->... /init.d/VMware-Workstation-Server
    From Workstation Server: fact

    If I disable the vmware application service, I get the following in the terminal window:

    root@naplesubuntu:~# remove any links of the system for etc/init.d/vmware-workstation-server...
    /etc/rc0.d/K01vmware-workstation-server
    /etc/RC2.d/S03vmware-workstation-server
    /etc/rc3.d/S03vmware-workstation-server
    /etc/RC4.d/S03vmware-workstation-server
    /etc/RC6.d/K01vmware-workstation-server
    Stop server workstation: fact

    If I believe that the service is running, but not doing anything, even though I do not see a specific process for this and there seems to be a vmware-workstation-server executable in/usr/bin.

    Not very well where to go from here.   I tried to uninstall and reinstall the workstation and even using a different port number for the Desktop server, but without any result.

    Suggestions welcome.

    Are you running other services on port 443 on this host?

  • Ubuntu 9.10 not working do not under Vmware Workstation 7

    My OS is Windows 7 pro and I'm using Vmware Workstation 7. I have Ubuntu 9.10 installed and it is powered OFF.  He worked at one point but does not work now. "I get ' permission on file - cannot locate the VMDK errors."   I want to upgrade from VMware Workstation 8. Should I go to the control panel and REMOVE Ubuntu 9.10 before installing Workstation 8 or will the upgrade fix, regardless of the errors I receive?   Any suggestions or ideas will be greatly appreciated.   Thanks in advance.

    From what you wrote it would be interesting to check the permissions of NTFS from the virtual computer. You should check the files using the Explorer. Where is your computer virtual stored or saved? Have you moved?

  • Ubuntu 11.04 very slow after upgrade to VMWare Workstation 8.0

    Hello

    After the update to VMWare Workstation 8.0 my Ubuntu 11.04 comments system (which worked very well with Workstation 7) behaves very slow sometimes.

    Slowly I want to say first that it is very laggy when I scroll conent inside windows, and also when I move windows.

    And with sometimes I want to say that this is not always the case. Sometimes, everything works fine for 1 or 2 hours and she begins and, sometimes, that's the problem immediately after starting Ubuntu.

    The problem occurs when restart Ubuntu does not help. But what is stopping Ubuntu and also restart VMWare Workstation on the host (in my case Windows 7) completely. When I do this and I'm lucky everything seems normal again for a while (1 or 2 hours). After that starts all over again.

    VMWare Tools is installed and the comments system has more then enough resources. I also improved the virtuale image to the latest version so that the new features in Workstation 8.0 are available.

    I first thought that maybe it's a RAM problem but the system begins to lag when there is still 1 GB + RAM available and 0.0% swap used.

    Any ideas what I could do? This is quite annoying...

    You can see the same bug that is described in this thread: http://communities.vmware.com/message/1840185#1840185

  • How to get Ubuntu 11 unit interface to work in VMWare Workstation

    I can't get the new Ubuntu Unity 11 work in VMWare Workstation interface.  Any help would be appreciated.

    I'm running the virtual machine with 2 GB of RAM, 2 processors and 3D graphic acceleration.  I think that it is a more powerful configuration than an old laptop on which I easily got the work unit.

    It still works, whenever Ubuntu starts, Gnome rather than unity.  This happens even if I have, that he set up on the logon screen to run Ubuntu (which is Unity) instead of Gnome.

    It's hard to find since VMWare also uses the term of the unit. Please be clear that I am wondering about the new Unity of Ubuntu 11 interface, NOT interface of the VMWare unit.

    VMware does not support what is needed to make it work in 3D and the only choice I've seen is to use unity 2D

    In a Terminal:

    sudo apt-get install unity-2d-default-settings

    See also:

    How to install unity 2D (Qt) in Ubuntu 11.04 / 10.10 ~ Web Upd8 ...

    Unity 2D is available as an Option in Ubuntu 11.04 Natty Narwhal

  • Installation of VMWare Workstation in Ubuntu [Hardy - Haron]

    Hello Gil,.

    I'm newbie in Linux. I was already using VMWare workstation in my windows.

    Now, I want to install the same version of http://Hardy - 8.04 Ubuntu linux.

    I was downloaded package VMware-Workstation - e.x.p - 240242.i386.bundle more here.

    Can anyone suggest me the steps for installation?

    Thank you.

    Hello

    You can follow this video. It shows how to install Workstation 6.5 on Ubuntu, but it should work for Workstation 7 also.

    Best wishes / Saludos.

    Pablo

    Please consider providing any useful answer. Thank you!! - Por favor considered premiar las useful responses. ¡¡MUCHAS gracias!

    Virtually noob blog

  • Windows7 + VMware workstation installation of ubuntu

    at the beginning sorry for my weak English level: P

    I had a problem

    I installed on my computer laptop windows 7 and vmware workstation 7 and I want to install ubuntu 9.04, but is not start the linux iso file, I had, iso file is good, I guess it's sort of a simple problem, I installed windows Server 2008 without any problem on vmware workstation but ubuntu doesn't even start...

    http://img31.imageshack.us/i/55688166.jpg/

    http://img199.imageshack.us/i/39370867.jpg/

    http://img683.imageshack.us/i/60346614.jpg/

    I thought there may be a problem with NIC so here, I try to boot after the removal of this

    http://img707.imageshack.us/i/80746708.jpg/

    http://img156.imageshack.us/i/47216333.jpg/

    my windows 7 has been installed juice, I have no problem with the hardware on the laptop

    > at first sorry for my weak English level: P

    Seems OK to me

    1 you have the CDROM 'reader' (your iso file) to connect to turn on? (Settings/CD/DVD of the VM)

    2 did you hit escape when BIOS starts and then tell it to boot from the CD?

    3. all entries in log file of your VM machine?

    A CD created from the file iso bootable in your machine?

    Lou

  • Problem with configure vmware workstation 6.5 with Ubuntu 9.04 64 bit latest kernel

    for the Intel-driving problem, I installed a new kernel for Jaunty.

    Normally, if you change the kernel, need new VMWARE-Workstation, but it does not work.

    I'm getting the following answer

    vmware sudo

    Login to /tmp/vmware-root/setup-26435.log

    ModInfo: vmmon module is not found

    ModInfo: module vmnet is not found

    ModInfo: module vmblock is not found

    ModInfo: vmci module is not found

    ModInfo: vsock module is not found

    ModInfo: vmmon module is not found

    ModInfo: module vmnet is not found

    ModInfo: module vmblock is not found

    ModInfo: vmci module is not found

    ModInfo: vsock module is not found

    ModInfo: vmmon module is not found

    ModInfo: module vmnet is not found

    ModInfo: module vmblock is not found

    ModInfo: vmci module is not found

    ModInfo: vsock module is not found

    ModInfo: vmmon module is not found

    ModInfo: module vmnet is not found

    ModInfo: module vmblock is not found

    ModInfo: vmci module is not found

    ModInfo: vsock module is not found

    ModInfo: vmmon module is not found

    ModInfo: module vmnet is not found

    ModInfo: module vmblock is not found

    ModInfo: vmci module is not found

    ModInfo: vsock module is not found

    ModInfo: vmmon module is not found

    ModInfo: module vmnet is not found

    ModInfo: module vmblock is not found

    ModInfo: vmci module is not found

    ModInfo: vsock module is not found

    Stopping VMware services:

    Virtual machine communication interface is

    Virtual machine monitor makes

    File system is blocking

    Using 2.6.x kernel build system.

    do: enter the directory ' / tmp/vmware-root/modules/vmmon-only '.

    do /lib/modules/2.6.31-999-generic/build/include/ - C... SUBDIRS = $PWD SRCROOT = $PWD. modules of

    make [1]: Entering directory ' / usr/src/linux-headers-2.6.31-999-generic'

    CC /tmp/vmware-root/modules/vmmon-only/linux/driver.o

    In file included from /tmp/vmware-root/modules/vmmon-only/linux/driver.c:31:

    /tmp/vmware-root/modules/vmmon-only/./include/compat_wait.h:78: error: conflicting types for 'poll_initwait '.

    include/Linux/poll.h:67: error: previous declaration of 'poll_initwait' is here

    /tmp/vmware-root/modules/vmmon-only/Linux/driver.c: in function 'LinuxDriverSyncCallOnEachCPU ':

    /tmp/vmware-root/modules/vmmon-only/Linux/driver.c:1423: error: too many arguments to function 'smp_call_function '.

    /tmp/vmware-root/modules/vmmon-only/Linux/driver.c: in function 'LinuxDriver_Ioctl ':

    /tmp/vmware-root/modules/vmmon-only/Linux/driver.c:1987: error: 'struct task_struct' has no member named 'euid.

    /tmp/vmware-root/modules/vmmon-only/Linux/driver.c:1987: error: 'struct task_struct' has no member named 'uid '.

    /tmp/vmware-root/modules/vmmon-only/Linux/driver.c:1988: error: 'struct task_struct' has no member named 'fsuid '.

    /tmp/vmware-root/modules/vmmon-only/Linux/driver.c:1988: error: 'struct task_struct' has no member named 'uid '.

    /tmp/vmware-root/modules/vmmon-only/Linux/driver.c:1989: error: 'struct task_struct' has no member named 'egid.

    /tmp/vmware-root/modules/vmmon-only/Linux/driver.c:1989: error: 'struct task_struct' has no member named 'gid '.

    /tmp/vmware-root/modules/vmmon-only/Linux/driver.c:1990: error: 'struct task_struct' has no member named 'fsgid '.

    /tmp/vmware-root/modules/vmmon-only/Linux/driver.c:1990: error: 'struct task_struct' has no member named 'gid '.

    /tmp/vmware-root/modules/vmmon-only/Linux/driver.c:2007: error: too many arguments to function 'smp_call_function '.

    make [2]: * /tmp/vmware-root/modules/vmmon-only/linux/driver.o error 1

    make [1]: * error 2

    make [1]: leaving directory ' / usr/src/linux-headers-2.6.31-999-generic'

    make: * http://vmmon.ko error 2

    make: leaving directory ' / tmp/vmware-root/modules/vmmon-only '.

    and the SETUP LOG

    Juli 28 19:20:55.486: app | Journal for VMware Workstation pid = 24193 version 6.5.2 = build = build-156735 option = output

    Juli 28 19:20:55.486: app | Host codepage = UTF-8 encoding = UTF-8

    Juli 28 19:20:55.486: app | Login to /tmp/vmware-root/setup-24193.log

    Juli 28 19:20:56.550: app | Extract the sources of the vmmon module.

    Juli 28 19:20:56.600: app | Module construction with the command: / usr/bin/make

    C - / tmp/vmware-root/modules/vmmon-only self-build SUPPORT_SMP = 1

    HEADER_DIR=/lib/modules/2.6.31-999-generic/build/include

    CC = / usr/bin/gcc = GREP / usr/bin/make IS_GCC_3 = no VMCCVER = 4.3.3

    and a box with this

    Error

    Failed to build the kernel module.

    Check the log file

    Does anyone know a Solution?

    Thank you

    Greetings

    Stefan

    -

    Computer laptop D830 DELL
    V9.04 Ubuntu Jaunty 64 bit


    Latest Version of VMWare Workstation

    -

    < / div >

    If you want to use the latest kernels that you should look for patches to update - look at this forum to find the last.

    http://communities.VMware.com/thread/221724?TSTART=0

    ___________________________________

    VMX-settings- VMware-liveCD - VM-infirmary

Maybe you are looking for

  • Wanted: screen touch compatabiity

    I think to buy a HP envy touchscreen 17 inch running win 8.1 (I need a new laptop computer) I plan on upgrading to windows 10.  I was wondering if anyone knew if the touch screen of a windows 8.1 would be able to use all the new features in windows 1

  • There was a problem connecting to the network

    It identifies the network properly even when I put the password - and that is the password - the comment poster 'there was a problem connecting to the network.  The WiFi network, you are trying to reach cannot be found. "Yet he already told me that t

  • HP Photosmart C4580 Wireless - can't get to work

    I just had to get a new computer and a new printer.  While I was there, I set up a wireless network.  I am running Windows Vista 64-bit on the new computer (gateway) and a HP Photosmart C4580 printer with wireless capability.  I can't the printer to

  • Usb 3.0 HP Pavilion G6 - 2203si Windows 7 64 bit drivers

    Hello I found all drivers for windows 7 64 bit, but I can't find the USB 3.0 drivers Help, please. I will appreciate if you can help me.

  • Boot Compaq Pesario SR1000 options

    HP Compaq Presario SR1000 Hi, can someone tell me if I can boot from USB on this PC please? I would like to do a clean install with Win 7 (x 86) HP Thanks in advance.