ACS v5.3 and Nortel Network
Hello
I have an Avaya (Nortel) (VSP9012) and I Don t make it work with version 5.3 of RADIUS.
GBA v4.2, it works well, even if it is true I have been for a long time to get it, because Nortel devices require special attributes, for operation with the RADIUS.
The Radius server accepts authentication request (I can see it in both, the radius server and the device), but won't let me do not access the device. I think the problem is in an attribute of privileges, but I can't find where or who.
This is what I added:
ID: 192 VALUE priority access reading-writing-All-Access 6
Thank you very much
A welcome message
It should be Unsigned Integer 32 but I think also that, why we need that because we already have seleceted - All-access read-write.
Try this only and remove the first.
Jatin kone
-Does the rate of useful messages-
Tags: Cisco Security
Similar Questions
-
WLC / ACS / AD - domain and laptops no - domain (802. 1 X / PEAP)
Hi all
I implement a solution based on 4404 WLC, 1113 ACS and Microsoft AD. What I want to achieve is to have two WIFI (SSID), that can be used by users on laptops of the domain, the other can be used by the users in the domain on personal laptops. Field portable computers will have full connectivity, but personal laptops will be restricted.
I created the two SSID using 802. 1 X by ACS / Remote Agent and can authenticate and connection OK.
I thought I should have user auth and auth machine for laptops of area but just user auth for personal laptops.
I have unauthenticated machines go to one group ACS or blocked, but I need to enable them in if they are on the SSID restricted. I can't quite understand how to have two SSID is authenticating with the same ACS / AD - one green and the other.
I'm on the right track?
Anyone done this before or have any bright ideas?
See you soon,.
John
With the use of WLAN access based on the SSID, users can be authenticated based on the SSID they use to connect to the WLAN. The Cisco Secure ACS server is used to authenticate users. Authentication happens in two stages on the Cisco Secure ACS:
1 authentication EAP
2 resulting SSID authentication of network (NARS) on Cisco Secure ACS Access Restrictions
For the new designation and configuraiton following URL can help you:
http://www.Cisco.com/en/us/Tech/tk722/tk809/technologies_configuration_example09186a00807669af.shtml
-
ACS, Service access and authorization
I'm under ACS 5.2 and I'm trying to set up 3 new SSID, which 2 are not guaranteed and 1 which is secure. I'm trying to understand the best way to allow their evolution on which network they come. All authentication requests are from the same devices, LAN controllers without wire, so NDG cannot be used as criteria. I was watching either create 3 Access Services and using selection rules, or by creating 1 Service access and using permission to choose. However, I can't find an attribute to use for determining what network they came.
Anyone has a suggestion for the best way to do it? I have
Go to the elements of the policy-> Conditions of network-> end of Station filters and create a rule CLI/DNIS that includes the name of the SSID, and then use it as a condition to any rule you create for authentication. The SSID will be preceded by MAC address, then enter * ssidname (i.e., match whatever it is before the name SSID, then match the SSID). For example, if the SSID is called lab, then you must enter * lab.
Then go to access-> Service selection policies and create a service selection rule that has end Station filter as a criterion.
-
Greetings programs,
I signed up for 35 G internet with Brighthouse lightning in August of last year. Worked great for two months, then started getting more slow slow and capped speed DL 12 G.
BrightHouse over the last two weeks came out and replaced all the cables on the House, the street and poles near home. Replaced twice modem (Motorola, only an Arris, now a huge Ubee modem. Thinking it was my four year old and put DLink upgraded router to a Linksys AC1600 model +. I even spent two days and six hours on the phone with supervisiors to Brighthouse trying different things. Nobody seems to know what to do. When I bought this laptop that is Windows 8... and has been finally updated to 8.1.
BUT...
I'm still a bottle neck to 12g on the laptop... but devices ALL wireless, three tablets, three phones, PS3 (connected, but capped by Sony at 20G) etc. are the actual speed. ONLY my laptop is capped at 12 the wire or wireless... BUT when I got the service in August of 2014 all worked for two months. Laughing out loud.
I have rand scans using malicious software Bytesand Microsoft Security Essentials to see NOTHING infect my laptop. I am at a loss now what to do.
Need help...
Hello @NeuroMan42,
Welcome to the HP Forums, I hope you enjoy your experience! To help you get the most out of the Forums of HP, I would like to draw your attention to the Guide of the Forums HP first time here? Learn how to publish and more.
I read your post on how your laptop's Wi - Fi connection keeps dropping, and I'd be happy to help you in this case!
To re - establish a coherent link between your laptop and the network, I recommend later in this document on troubleshooting wireless network and Internet (Windows 8). This should help to run a diagnostic on your system using the network and Internet troubleshooting, as well as measures to maintain your system over the wireless network.
In addition, I suggest also follows the steps below to ensure that your power management settings do not interfere with
the connection to the network:
1. open DEVICE MANAGER
2. open the NETWORK CARDS
3. right click on the WiFi adapter for the pc and left click on PROPERTIES
4. click on POWER up.
5. remove the check mark beside : ALLOW the COMPUTER TO TURN THIS DEVICE SAVE START STOP
6. click on OK
7. close DEVICE MANAGER and test. -
I mistakenly remove updates from facebook and other networks, please how to restore it back
Original title: error.
I mistakenly remove updates from facebook and other networks, please how to restore it back
I mistakenly remove updates from facebook and other networks, please how to restore it back
Hello
Use the following website links to Facebook help.
Facebook Help Center | Facebook: http://www.facebook.com/help/
Facebook Support Forums: http://www.thefacebookforum.net/forum
Concerning
-
At my place of work, there are a data server with LAN and internet networking. I want to disable the internet connection before it is infected with the virus.
original title: server and virus problemHi SurajMendon,
Your Windows XP question is more complex than what is generally answered in the Microsoft Answers forums. It is better suited for the platform of networking on TechNet. Please post your question in the TechNet Windows XP Networking forum.
Networking platform
http://social.technet.Microsoft.com/forums/en-us/winserverPN/threads
-
Original title: cannot establish a network connection
Very well, a computer can connect to the internet. Another computer using the same modem cable and fixed connection of the router (for example using the port adapter, not wireless) Wireless does not connect. I suspect that there are has some settings somewhere that are not correct. Can you tell me how to understand where is the problem?
Messages on the icon alternate between "Acquiring network address" and "unplugged network cable. When I run troubleshooting this is what I get:Diagnosis of IP Configuration
Invalid IP address
Info
Zero (0.0.0.0) detected IP address
action
Auto repair: renew the IP address
action
Release the current IP address...
action
Successfully published the current IP address
action
Renew the IP address...
error
Error to renew the IP address: the semaphore timeout period has expired.
Info
AutoNet address detected: 169.254.225.103
action
Auto repair: reset the network connection
action
Disabling the network card
action
Activation of the card network
Info
Successfully activated network adapter
Info
Zero (0.0.0.0) detected IP address
action
Repair Manual: Reboot modem
Info
AutoNet address detected: 169.254.225.103
action
Auto repair: renew the IP address
action
Release the current IP address...
action
Successfully published the current IP address
action
Renew the IP address...
error
Error to renew the IP address: the semaphore timeout period has expired.
Info
AutoNet address detected: 169.254.225.103
Info
Redirect the user to support call
WinSock status
Info
All base service provider entries are present in the Winsock Catalog.
Info
Winsock Service providers strings are valid.
Info
Entry provider MSAFD Tcpip [TCP/IP] passed the loopback communication test.
Info
Entry provider MSAFD Tcpip [UDP/IP] passed the loopback communication test.
Info
Entry provider RSVP UDP Service Provider managed the loopback communication test.
Info
Entry provider RSVP TCP Service Provider passed the loopback communication test.
Info
Connectivity is valid for all Winsock service providers.
Diagnosis of network adapter
Network location detection
Info
Using the Internet connection at home
Identification of network adapter
Info
Network connection: name = Local 2, Device network connection = Intel(r) 82562V-2 10/100 Network Connection, MediaType = LAN, type = LAN
Info
Ethernet connection selected
State of the network adapter
Info
The network connection status: connected
HTTP, HTTPS, FTP Diagnostic
HTTP, HTTPS, FTP connectivity
warn
FTP (passive): error 12007 connecting to FTP.Microsoft.com: the server name or address cannot be resolved
warn
HTTP: Error 12007 connecting to www.microsoft.com: the server name or address cannot be resolved
warn
HTTPS: Error 12007 connecting to www.microsoft.com: the server name or address cannot be resolved
warn
HTTPS: Error 12007 connecting to www.passport.net: the server name or address cannot be resolved
warn
FTP (active): error 12007 connecting to FTP.Microsoft.com: the server name or address cannot be resolved
warn
HTTP: Error 12007 connecting to www.hotmail.com: the server name or address cannot be resolved
error
Could not make an HTTP connection.
error
Could not make an HTTPS connection.
error
Could not make an FTP connection.
I found the problem (s), even if I am always left with a few questions.
During this process, I have disabled the firewall, but that did not help. However, I noticed 'tweaks' accessed via the tab 'Advanced' in 'Microsoft Firewall' which looked like, they must be checked in order to access the internet. I checked these and reintroduced the firewall. After I got things working, I unchecked them and things still worked so I obviously don't understand what these parameters.
The solution:
(1) I have to go straight from the modem cable to the computer. I can't have a cable modem, router wireless, computer, even if using hard wire, and even if this same configuration works with another computer. Also, I can't use a cable length to go from modem to the computer. So, it seems to have had a problem of cable length. Power problem? Only connected to this computer devices are the mouse, the keyboard and the Ethernet. Would not this be fixed with an upgrade of the power supply? Or is it due to the quality of the Ethernet hardware on the motherboard? It's a Dell Vostro 200.
(2) in back and forth between configurations while following the problem, you must think to unplug the modem to reset between each configuration. You may have stumbled upon the solution, otherwise he's not shot. Also, I unplugged the cable from the modem when you reset data cable - do not know if it was necessary. I wanted to limit the degrees of freedom that I had a lot, as it was.
-
After you restart the Server 2003 due to a storm, I now get a message on two of my workstations that are different from the current time on this computer and the network
Hello
This question would fit better in Windows Server Instances.
-
HP 15-r001nc: controller and USB network controller
Hello. I reinstalled my OS to Windows 7 and I need the software for my laptop HP 15-r001nC: controller and USB network controller. Thank you
Hi, I am in the process to recover my computer after losing the hard disk. Pavillion DV6 1030US. I installed a 500 GB SSHD and I'm having issues after using my original Vista SP2 64-bit software. In Device Manager, I have (?) in other devices. Following your disposal advise here is the information found in the hardware ID:
PCI\VEN_8086 & DEV_4237 & SUBSYS_12118086 & REV_00
PCI\VEN_8086 & DEV_4237 & SUSBSYS_12118086
PCI\VEN_8086 & DEV4237 & CC_028000
PCI\VEN_8086 & DEV4237 & CC_0280
-
Lack of Volume and the network icon in the Notification area
I lost my volume and internet icons in the notification area. I'm going to the properties of the taskbar and put into service, and on the notification area tab, I only have the clock and checked power. I can see the volume and the network listed, but they don't have a click box, then what to do?
Try this
Click Start
Collapse this includes this imagetype regedit in the Search box and press ENTER.
If you are prompted for an administrator password or for confirmation, type the password, or click allow.- Locate and then click the following registry subkey:Settings\Software\Microsoft\Windows\CurrentVersion\TrayNotify HKEY_CURRENT_USER
- In the Details pane, click the IconStreams registry entry.
- On the Edit menu, click delete, and then click Yes.
- In the Details pane, click the PastIconsStream registry entry.
- On the Edit menu, click delete, and then click Yes.
- Exit Registry Editor.
- Restart the Explorer.exe process. To do this, follow these steps:
- Press CTRL + SHIFT + ESC.
- On the process in the Task Manager tab, click the process explorer.exe and then double click on end process .
- On the file menu, click new task (run), type Explorer and click OK.
- Exit Task Manager.
-
Original title: unidentified network, missing the default gateway
Hello
So one day out of the blue I lost connection with my router. I was able to reconnect but this time around I had only limited access and my network showed non-identified. I tried to connect to a different wireless network, same thing. When I run ipconfig, I'm missing a value for the default gateway.
I tried to:
-Reinstall the drivers for the adapter
-update the drivers
-Reset my router
-Gateway ipv4 manually of entry
-kill lan via Device Manager drivers
-scream at the computer
I have a Setup to dual boot with Linux Mint along side Windows 7. When I boot in Linux it connects to any network without problem.
Some help would be appreciated.
Plug
Windows 7 Ultlimate
I7-4700MQ @2.4
GTX 765M 2 GB
8 GB RAM
1 TB + 240SSD
Realtek RTL8188CE wireless
Hello Alex,.
Thank you for your response.
I appreciate your time.
I suggest you to uninstall the network driver wireless and reinstall in compatibility mode.
To uninstall the driver, follow these steps:
a. press Windows + R keys together, type devmgmt.msc in the run window and press ENTER.
b. Click to expand network adapters, right-click on the map and click Uninstall.
c. restart the computer.
Now you can Download driver from this link wireless.
Reference:
http://downloads.Eurocom.com/support/drivers/zip/238/238_RealtekWLAN_W764.zipFor reference:
EC http://www.Eurocom.com/EC/drivers (238)To reinstall the driver in compatibility mode, follow these steps:
a. right click the driver file, and then click Properties.
b. click on the compatibility tab.
c. click on check "run this program in compatibility mode for" and select Windows XP(Service pack 3).
d. click apply and ok.
Now, install the driver.
Please keep us updated.
Thank you
-
Hi, I hope you can help with this problem. A friend has 6 computers networked to a Tower Server and have a problem. A worker student put computers into hibernation, and since then, nobody can connect to the network on this computer. The error indicates, "the trust relationship between this device and the network is no longer valid. I tried to get into the pc to try removing network and replace it, but I can't get on the Administrators account because it has been disabled. I'm at a loss on how to proceed. My friend cannot afford a service call, so I'll try to help him. Thank you
If the computer is on a domain then there are at least two accounts that can be used to remove the computer from the domain:
- A domain administrator account.
- A local administrator account.
When your friend has launched Windows for the first time after buying the machine, he was prompted to enter the name of an account. This account is created automatically with administrator privileges. He should use it now.
-
BlackBerry Smartphones, wifi and mobile network Q
If I turn on my wifi at home & sign in, & at the same time, let Mobile network on... fresh data which of them will be run out of? The Mobile network will win or share or just use wifi?
Also I was wondering because I wonder if light work wifi when I'm at work, save my data & pass their lol
TIA!
Hello
In general, BBs "prefer" WiFi network of business for services BIS data. You can always check inside the connection management > State of Services, which BIS route is average.
But you should also check inside the apps... many 3rd party applications have configuration items, inside the application, allowing you to order the application to use a data compared to another channel. What I always do is run my apps use BIS... in this way, they will follow along as BIS shifts between WiFi and my network of business data. But, if (for example) you configure an application to use only your corporate data network, while the app can avoid past well after BIS BIS to WiFi, and this app may well continue to consume data out of your network connection data carrier, even if BIS moved to WiFi.
With older OS levels, you had no choice, but to leave the "Data Services" set on "on" any channel to use, which often caused the situation described above (BIS on WiFi, but some consumption of carrier data app)... disabling the Services of data, these levels of older OS, BIS-level data for all channels off including WiFi. With the later levels of the operating system (somewhere in the OS7 range, I remember well), you can actually turn off the parameter Data Services and wireless leash... that allows BIS to still work on WiFi, but prevents any application using the data carrier network regardless of how the application is configured.
But... I'm curious... you may have about the features that only work on SmartPhones BB, yet your profile on this site says you have only a PlayBook, in which case none of this applies since the PB has no radio has WiFi and mobile only. But, you posted this in the "BOLD" of this site section, so you could guess assumes that you have a "BOLD" in addition to your PB...
Good luck!
-
Ganymede + auth-proxy on acs 5.0 and later support?
The nas is 2801 with ios 15.1 and acs 5.3.i want to deploy auth-proxy using Ganymede + protocol.but there no work.using RADIUS is ok.
I want to know Ganymede + auth-proxy on acs 5.0 and later support?
Thank you!
GANYMEDE + Auth-Proxy is only supported after ACS 5.3 patch 5. Upgrade your ACS 5.x or use RADIUS for authentication Proxy.
-
Hello
I have a fixed computer Windows 7, I need to configure for the use of wire and wireless networks.
On the phone we transfer vast amounts of data, astronomy cameras than only products of 20 to 30 seconds, space images 3-4 GB each. The cameras are connected to the top of a tower, which in turn is connected via a 45 feet cable CAT-5 to the search engine.
Internet access requires a wireless network connection.
These two connections work - separately. I have to disable an and activate the other to pass. This jump back and foth is obviously a bit inconvenient.
How to configure Windows 7 to manage both types of networks at the same time? On another forum I learned this kind of configuration is called multihoming, and it's something difficult to achieve.
Having studied more about it, there is another possible solution called Internet connection sharing. that may be easier. I haven't used this option for years (since the routers were introduced) but is still active.
Disable DHCP on the Dovado or use a cable between the PC and the laptop.
Turn on the wireless on the PC and make sure that you have an internet connection. Disable wireless on the laptop. Connect the PC's LAN ports and laptop (via router or a cable crossover).
IN the network of PCs and next to the connections Sharing Center, you must have 2 Ethernet and WiFi options. Double click on WiFi, then on the next screen, click Properties.
The second tab in the next screen is sharing, check allow other users of the network to connect and then OK.
Define the IP addresses for PC and laptop as in my previous post, but this time on the laptop set the default gateway to the IP address of the Wired of the PC port, the 1st DNS to the address of the Huawei and value of secondary school who suggested for your ISP.
This affects your PC to access wireless internet and allows the laptop to access the internet via the PC
Basic information about ICS are HERE
Manuals for the Dovado HERE
Maybe you are looking for
-
Error: Firefox can't establish a connection to the server www.reddit.com. The site could be temporarily unavailable or too busy. Try again in a few moments. If you are unable to load any pages, check your computer's network connection. If your comput
-
I downloaded the Facepaste module, but it does not work.
I have the add-on Facepaste and tried on my photo in Facebook. I don't get the option to copy the image of Facebook. On the contrary, he says 'inspect element (Q). How can I copy photos to my photos from Facebook?
-
When you surf privately from navigation (firefox 20 and windows operating system 7), often (not always) click to see a video clip (YouTube for example) opens the non-private tabs. I need more of the mouseon the icon of firefox in the toolbar of quick
-
Laptop: my laptop seems to be overheating
My laptop seems to be overheating, what can I do? Bill
-
the module installation check whenever I reboot computer
If I restart my computer, then open Firefox, I am always asked to check and install my previously installed modules manually. http://blog.Mozilla.com/addons/files/2011/08/3rdParty-install.PNG (not a picture of my browser, but the same prompt installa